aboutsummaryrefslogtreecommitdiff
path: root/src/tool_getparam.c
AgeCommit message (Collapse)Author
2019-08-08CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directlyDaniel Stenberg
Even though it cannot fall-back to a lower HTTP version automatically. The safer way to upgrade remains via CURLOPT_ALTSVC. CURLOPT_H3 no longer has any bits that do anything and might be removed before we remove the experimental label. Updated the curl tool accordingly to use "--http3". Closes #4197
2019-08-06curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
Ref: https://github.com/curl/curl/issues/3653 Ref: https://github.com/curl/curl/pull/3790 NOTE: This commit was cherry-picked and is part of a series of commits that added the authzid feature for upcoming 7.66.0. The series was temporarily reverted in db8ec1f so that it would not ship in a 7.65.x patch release. Closes https://github.com/curl/curl/pull/4186
2019-07-30curl: cap the maximum allowed values for retry time argumentsDaniel Stenberg
... to avoid integer overflows later when multiplying with 1000 to convert seconds to milliseconds. Added test 1269 to verify. Reported-by: Jason Lee Closes #4166
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-20curl: support parallel transfersDaniel Stenberg
This is done by making sure each individual transfer is first added to a linked list as then they can be performed serially, or at will, in parallel. Closes #3804
2019-05-25Revert all SASL authzid (new feature) commitsJay Satiro
- Revert all commits related to the SASL authzid feature since the next release will be a patch release, 7.65.1. Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined for the next release, assuming it would be a feature release 7.66.0. However instead the next release will be a patch release, 7.65.1 and will not contain any new features. After the patch release after the reverted commits can be restored by using cherry-pick: git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690 Details for all reverted commits: Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()." This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a. Revert "tests: Fix the line endings for the SASL alt-auth tests" This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221. Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples" This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75. Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool" This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817. Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID" This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
2019-05-22curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
2019-05-20curl: report error for "--no-" on non-boolean optionsDaniel Stenberg
Reported-by: Olen Andoni Fixes #3906 Closes #3907
2019-03-03alt-svc: the curl command line bitsDaniel Stenberg
2019-02-19cli tool: fix mime post with --disable-libcurl-option configure optionPatrick Monnerat
Reported-by: Marcel Raad Fixes #3576 Closes #3583
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-11-30curl: fix memory leak reading --writeout from fileDaniel Stenberg
If another string had been set first, the writout function for reading the syntax from file would leak the previously allocated memory. Reported-by: Brian Carpenter Fixes #3322 Closes #3330
2018-11-23snprintf: renamed and we now only use msnprintf()Daniel Stenberg
The function does not return the same value as snprintf() normally does, so readers may be mislead into thinking the code works differently than it actually does. A different function name makes this easier to detect. Reported-by: Tomas Hoger Assisted-by: Daniel Gustafsson Fixes #3296 Closes #3297
2018-11-09curl: --local-port range was not "including"Daniel Stenberg
The end port number in a given range was not included in the range used, as it is documented to be. Reported-by: infinnovation-dev on github Fixes #3251 Closes #3255
2018-11-08curl: --local-port fix followupDaniel Stenberg
Regression by 52db54869e6. Reported-by: infinnovation-dev on github Fixes #3248 Closes #3249
2018-11-07curl: fix --local-port integer overflowDaniel Stenberg
The tool's local port command line range parser didn't check for integer overflows and could pass "weird" data to libcurl for this option. libcurl however, has a strict range check for the values so it rejects anything outside of the accepted range. Reported-by: Brian Carpenter Closes #3242
2018-11-03tool_getparam: fix some commentsMichael Kaufmann
2018-09-06curl: --doh-url addedDaniel Stenberg
2018-08-21curl-compilers: enable -Wimplicit-fallthrough=4 for GCCMarcel Raad
This enables level 4 instead of the default level 3, which of the currently used comments only allows /* FALLTHROUGH */ to silence the warning. Closes https://github.com/curl/curl/pull/2747
2018-08-15curl: warn the user if a given file name looks like an optionDaniel Stenberg
... simply because this is usually a sign of the user having omitted the file name and the next option is instead "eaten" by the parser as a file name. Add test1268 to verify Closes #2885
2018-08-08ssl: set engine implicitly when a PKCS#11 URI is providedAnderson Toshiyuki Sasaki
This allows the use of PKCS#11 URI for certificates and keys without setting the corresponding type as "ENG" and the engine as "pkcs11" explicitly. If a PKCS#11 URI is provided for certificate, key, proxy_certificate or proxy_key, the corresponding type is set as "ENG" if not provided and the engine is set to "pkcs11" if not provided. Acked-by: Nikos Mavrogiannopoulos Closes #2333
2018-07-28curl: Fix segfault when -H @headerfile is emptyTobias Blomberg
The curl binary would crash if the -H command line option was given a filename to read using the @filename syntax but that file was empty. Closes #2797
2018-06-11cppcheck: fix warningsMarian Klymov
- Get rid of variable that was generating false positive warning (unitialized) - Fix issues in tests - Reduce scope of several variables all over etc Closes #2631
2018-05-31option: disallow username in URLBjörn Stenberg
Adds CURLOPT_DISALLOW_USERNAME_IN_URL and --disallow-username-in-url. Makes libcurl reject URLs with a username in them. Closes #2340
2018-05-29setopt: add TLS 1.3 ciphersuitesDaniel Stenberg
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS. curl: added --tls13-ciphers and --proxy-tls13-ciphers Fixes #2435 Reported-by: zzq1015 on github Closes #2607
2018-05-24httpauth: add support for Bearer tokensLinus Lewandowski
Closes #2102
2018-05-21curl: added --styled-outputDaniel Stenberg
It is enabled by default, so --no-styled-output will switch off the detection/use of bold headers. Closes #2538
2018-05-21curl: show headers in boldDaniel Stenberg
The feature is only enabled if the output is believed to be a tty. -J: There's some minor differences and improvements in -J handling, as now J should work with -i and it actually creates a file first using the initial name and then *renames* that to the one found in Content-Disposition (if any). -i: only shows headers for HTTP transfers now (as documented). Previously it would also show for pieces of the transfer that were HTTP (for example when doing FTP over a HTTP proxy). -i: now shows trailers as well. Previously they were not shown at all. --libcurl: the CURLOPT_HEADER is no longer set, as the header output is now done in the header callback.
2018-03-17CURLOPT_HAPROXYPROTOCOL: support the HAProxy PROXY protocolLawrence Matthews
Add --haproxy-protocol for the command line tool Closes #2162
2018-03-08curl tool: accept --compressed also if Brotli is enabled and zlib is not.Patrick Monnerat
2018-02-20url: Add option CURLOPT_HAPPY_EYEBALLS_TIMEOUTAnders Bakken
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy eyeball timeout value. - Add new optval macro CURL_HET_DEFAULT to represent the default happy eyeballs timeout value (currently 200 ms). - Add new tool option --happy-eyeballs-timeout-ms to expose CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the other -timeout options in the tool expect seconds not milliseconds. Closes https://github.com/curl/curl/pull/2260
2018-02-05time-cond: fix reading the file modification time on WindowsMichael Kaufmann
On Windows, stat() may adjust the unix file time by a daylight saving time offset. Avoid this by calling GetFileTime() instead. Fixes #2164 Closes #2204
2018-01-30curl: add --proxy-pinnedpubkeyDaniel Stenberg
To verify a proxy's public key. For when using HTTPS proxies. Fixes #2192 Closes #2268
2017-12-26tool_getparam: Support size modifiers for --max-filesizeGisle Vanem
- Move the size modifier detection code from limit-rate to its own function so that it can also be used with max-filesize. Size modifiers are the suffixes such as G (gigabyte), M (megabyte) etc. For example --max-filesize 1G Ref: https://curl.haxx.se/mail/archive-2017-12/0000.html Closes https://github.com/curl/curl/pull/2179
2017-11-04curl: speed up handling of many URLsDaniel Stenberg
By properly keeping track of the last entry in the list of URLs/uploads to handle, curl now avoids many meaningless traverses of the list which speeds up many-URL handling *MASSIVELY* (several magnitudes on 100K URLs). Added test 1291, to verify that it doesn't take ages - but we don't have any detection of "too slow" command in the test suite. Reported-by: arainchik on github Fixes #1959 Closes #2052
2017-09-11code style: use spaces around plusesDaniel Stenberg
2017-09-11code style: use spaces around equals signsDaniel Stenberg
2017-09-02mime: use in curl cli tool instead of form API.Patrick Monnerat
Extended -F option syntax to support multipart mail messages. -F keyword headers= added to include custom headers in parts. Documentation upgraded.
2017-08-17ssh: add the ability to enable compression (for SCP/SFTP)Viktor Szakats
The required low-level logic was already available as part of `libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1] option.) This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION` (boolean) and the new `curl` command-line option `--compressed-ssh` to request this `libssh2` feature. To have compression enabled, it is required that the SSH server supports a (zlib) compatible compression method and that `libssh2` was built with `zlib` support enabled. [1] https://www.libssh2.org/libssh2_session_flag.html Ref: https://github.com/curl/curl/issues/1732 Closes https://github.com/curl/curl/pull/1735
2017-08-14strtoofft: reduce integer overflow risks globallyDaniel Stenberg
... make sure we bail out on overflows. Reported-by: Brian Carpenter Closes #1758
2017-08-07curl: detect and bail out early on parameter integer overflowsDaniel Stenberg
Make the number parser aware of the maximum limit curl accepts for a value and return an error immediately if larger, instead of running an integer overflow later. Fixes #1730 Closes #1736
2017-08-05getparameter: avoid returning uninitialized 'usedarg'Daniel Stenberg
Fixes #1728
2017-07-09tool_getparam: fix potentially uninitialized errJay Satiro
2017-06-28curl --socks5-{basic,gssapi}: control socks5 authKamil Dudka
Closes https://github.com/curl/curl/pull/1454
2017-06-26tool_getparam: fix memory leak on test 1147 OOM (torture tests)Jay Satiro
Bug: https://github.com/curl/curl/pull/1486#issuecomment-310926872 Reported-by: Dan Fandrich
2017-06-21--request-target: instead of --strip-path-slashDaniel Stenberg
... and CURLOPT_REQUEST_TARGET instead of CURLOPT_STRIP_PATH_SLASH. This option instead provides the full "alternative" target to use in the request, instead of extracting the path from the URL. Test 1298 and 1299 updated accordingly. Idea-by: Evert Pot Suggestion: https://daniel.haxx.se/blog/2017/06/19/options-with-curl/comment-page-1/#comment-18373 Closes #1593
2017-06-19http: add --strip-path-slash and CURLOPT_STRIP_PATH_SLASHDaniel Stenberg
... to enable sending "OPTIONS *" which wasn't possible previously. This option currently only works for HTTP. Added test cases 1298 + 1299 to verify Fixes #1280 Closes #1462
2017-06-16curl: prevent binary output spewed to terminalDaniel Stenberg
... unless "--output -" is used. Binary detection is done by simply checking for a binary zero in early data. Added test 1425 1426 to verify. Closes #1512
2017-06-15curl: allow --header and --proxy-header read from fileDaniel Stenberg
So many headers can be provided as @filename. Suggested-by: Timothe Litt Closes #1486
2017-05-09tool: fix remaining -Wcast-qual warningsMarcel Raad
Avoid casting away low-level const.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 10:13:27 +0000