| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Two separate "Value stored to 'XXX' is never read" warnings
|
|
Value stored to 'separator' is never read
|
|
... and orig_isatty which caused --silent to be entirely ignored in case
the standard output was redirected to a file!
|
|
Print "parsing (...) OK" only when no warnings are generated. If
no file is found in Metalink, treat it FAILED.
If no digest is provided, print WARNING in parse_metalink().
Also print validating FAILED after download.
These changes make tests 2012 to 2016 pass.
|
|
|
|
Including headers in response body will break Metalink XML parser.
If it is included in the file described in Metalink XML, hash check
will fail. Therefore, --include should be ignored if --metalink is
used.
|
|
|
|
The noprogress and isatty in Configurable are global, in a sense
that they persist in one curl invocation. Currently once one
download writes its response data to tty, they are set to FALSE
and they are not restored on successive downloads. This change
first backups the current noprogress and isatty, and restores
them when download does not write its data to tty.
|
|
In this change, --metalink option no longer takes argument. If
it is specified, given URIs are processed as Metalink XML file.
If given URIs are remote (e.g., http URI), curl downloads it
first. Regardless URI is local file (e.g., file URI scheme) or
remote, Metalink XML file is not written to local file system and
the received data is fed into Metalink XML parser directly. This
means with --metalink option, filename related options like -O
and -o are ignored.
Usage examples:
$ curl --metalink http://example.org/foo.metalink
This will download foo.metalink and parse it and then download
the URI described there.
$ curl --metalink file://foo.metalink
This will parse local file foo.metalink and then download the URI
described there.
|
|
|
|
Additionally, make hash checking ability mandatory in order to allow metalink
support in curl.
A command line option could be introduced to skip hash checking at runtime,
but the ability to check hashes should always be built-in when providing
metalink support.
|
|
|
|
|
|
|
|
|
|
|
|
Metalink file contains several hash types of checksums, such as
md5, sha-1, sha-256, etc. To deal with these checksums, I created
abstraction layer based on lib/curl_md5.h and
lib/md5.c. Basically, they are almost the same but I changed the
code so that it is not hash type dependent. Currently,
GNUTLS(nettle or gcrypt) and OpenSSL functions are supported.
Checksum checking is done by reopening download file. If there
is an I/O error, the current implementation just prints error
message and does not try next resource.
In this patch, the supported hash types are: md5, sha-1 and sha-256.
|
|
Filenames contained in Metalink file can include directory information.
Filenames are unique in Metalink file, taking into account the directory
information. So we need to create the directory hierarchy.
Curl has --create-dirs option, but we create directory hierarchy for
Metalink downloads regardless of the option value.
This patch also put metalink int variable outside of HAVE_LIBMETALINK
guard. This reduces the number of #ifdefs.
|
|
|
|
Parse downloaded Metalink file and add downloads described there. Fixed
compile error without metalink support.
|
|
Don't update config->metalinkfile_last in operate(). Use local variable
to point to the current metalinkfile.
|
|
Print message if --metalink is used while metalink support is not
enabled. Migrated Metalink support in tool_operate.c and removed
operatemetalink().
|
|
This change adds experimental Metalink support to curl.
To enable Metalink support, run configure with --with-libmetalink.
To feed Metalink file to curl, use --metalink option like this:
$ curl -O --metalink foo.metalink
We use libmetalink to parse Metalink files.
|
|
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
|
|
MIPSPro compiler detected curl_easy_getinfo() related missing adjustments.
SunPro compiler detected curl tool --libcurl option related missing adjustments.
|
|
Data type of internal vars holding CURLAUTH_* bitmasks changed from 'long' to
'unsigned long' for proper handling and operating.
|
|
Explicit conversion to 'long' of curl_easy_setopt() third argument for options
CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are
docummented to be used.
|
|
|
|
|
|
Configuration files such as curl_config.h and all config-*.h no longer exist
nor are generated/copied into 'src' directory, now these only exist in 'lib'
directory from where curl tool sources uses them.
Additionally old src/setup.h has been refactored into src/tool_setup.h which
now pulls lib/setup.h
The possibility of a makefile needing an include path adjustment exists.
|
|
|
|
By modifying the parameter list for ourWriteOut() and passing the
OutStruct that collects data in tool_operate, we get access to the
remote name that we're writing to. Shell scripters should find this
useful when used in conjuntion with the --remote-header-name option.
|
|
This patch improves the output of curl's --libcurl option by
generating code which builds curl_httppost and curl_slist lists, and
uses symbolic names for enum and flag values. Variants of the
my_setopt macro in tool_setopt.h are added in order to pass extra type
information to the code-generation step in tool_setopt.c.
If curl is configured with --disable-libcurl-option then the macros
call curl_easy_setopt directly.
|
|
Added an extra command-line argument to support the optional AUTH
parameter in SMTPs MAIL FROM command.
|
|
|
|
This new option tells curl to not work around a security flaw in the
SSL3 and TLS1.0 protocols. It uses the new libcurl option
CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
|
|
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via
the sockopt callback. If --keepalive-time is used, apply the value to
CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
|
|
This prevents clobbering of non recoverable error return codes while
retaining intended functionality of commit 65103efe
|
|
We want to continue to the next URL to try even on failures returned
from libcurl. This makes -f with ranges still get subsequent URLs even
if occasional ones return error. This was a regression as it used to
work and broke in the 7.23.0 release.
Added test case 1328 to verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3481223
Reported by: Juan Barreto
|
|
Remove wrongly implemented optimisation of telnet upload, apparently
intended to allow the library to avoid manually polling for input.
|
|
|
|
|
|
A regression between 7.22.0 and 7.23.0 -- downloading a file with the
flags -O and -J results in the content being written to stdout if and
only if there was no Content-Disposition header in the http response. If
there is a C-D header with a filename attribute, the output is correctly
written.
Reported by: Dave Reisner
Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
|
|
Move curl_easy_perform source code geneartion out of curl_easy_perform's loop
for proper OOM handling and source code geneartion.
|
|
Previously we required that -S/--show-error was used _after_
-s/--silent. This was slightly confusing since we strive to make
arguments as position independent as possible.
Now, you can use them in any order and the result should still be the
same.
Bug: http://curl.haxx.se/bug/view.cgi?id=3424286
Reported by: Andreas Olsson
|
|
|
|
|
|
|
|
|
