aboutsummaryrefslogtreecommitdiff
path: root/src/tool_operate.c
AgeCommit message (Collapse)Author
2019-12-06curl: make the etag load logic work without fseekDaniel Stenberg
The fseek()s were unnecessary and caused Coverity warning CID 1456554 Closes #4681
2019-12-05etag: allow both --etag-compare and --etag-save in same cmdlineDaniel Stenberg
Fixes #4669 Closes #4678
2019-12-03curl: show better error message when no homedir is foundDaniel Stenberg
Reported-by: Vlastimil Ovčáčík Fixes #4644 Closes #4665
2019-11-28curl: two new command line options for etagsMaros Priputen
--etag-compare and --etag-save Suggested-by: Paul Hoffman Fixes #4277 Closes #4543
2019-11-26curl: fix --upload-file . hangs if delay in STDINJohn Schroeder
Attempt to unpause a busy read in the CURLOPT_XFERINFOFUNCTION. When uploading from stdin in non-blocking mode, a delay in reading the stream (EAGAIN) causes curl to pause sending data (CURL_READFUNC_PAUSE). Prior to this change, a busy read was detected and unpaused only in the CURLOPT_WRITEFUNCTION handler. This change performs the same busy read handling in a CURLOPT_XFERINFOFUNCTION handler. Fixes #2051 Closes #4599 Reported-by: bdry on github
2019-11-21curl: add --parallel-immediateDaniel Stenberg
Starting with this change when doing parallel transfers, without this option set, curl will prefer to create new transfers multiplexed on an existing connection rather than creating a brand new one. --parallel-immediate can be set to tell curl to prefer to use new connections rather than to wait and try to multiplex. libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default on parallel transfers. Suggested-by: Tom van der Woerdt Closes #4500
2019-11-14curl: fix -T globbingDaniel Stenberg
Regression from e59371a4936f8 (7.67.0) Added test 490, 491 and 492 to verify the functionality. Reported-by: Kamil Dudka Reported-by: Anderson Sasaki Fixes #4588 Closes #4591
2019-10-16tool_operate: Fix retry sleep time shown to user when Retry-AfterStian Soiland-Reyes
- If server header Retry-After is being used for retry sleep time then show that value to the user instead of the normal retry sleep time. This is a follow-up to 640b973 (7.66.0) which changed curl tool so that the value from Retry-After header overrides other retry timing options. Closes https://github.com/curl/curl/pull/4498
2019-10-05curl: ensure HTTP 429 triggers --retryStian Soiland-Reyes
This completes #3794. Also make sure the new tests from #4195 are enabled Closes #4465
2019-10-02tool_operate: rename functions to make more senseDaniel Stenberg
2019-10-02curl: create easy handles on-demand and not ahead of timeDaniel Stenberg
This should again enable crazy-large download ranges of the style [1-10000000] that otherwise easily ran out of memory starting in 7.66.0 when this new handle allocating scheme was introduced. Reported-by: Peter Sumatra Fixes #4393 Closes #4438
2019-09-22curl: exit the create_transfers loop on errorsDaniel Stenberg
When looping around the ranges and given URLs to create transfers, all errors should exit the loop and return. Previously it would keep looping. Reported-by: SumatraPeter on github Bug: #4393 Closes #4396
2019-09-20tool_operate: removed unused variable 'done'Daniel Stenberg
Fixes warning detected by PVS-Studio Fixes #4374
2019-09-20tool_operate: Expression 'config->resume_from' is always trueDaniel Stenberg
Fixes warning detected by PVS-Studio Fixes #4374
2019-09-13curl: fix memory leaked by parse_metalink()Kamil Dudka
This commit fixes a regression introduced by curl-7_65_3-5-gb88940850. Detected by tests 2005, 2008, 2009, 2010, 2011, and 2012 with valgrind and libmetalink enabled. Closes #4326
2019-09-10curl: make sure the parallel transfers do them allDaniel Stenberg
The logic could erroneously break the loop too early before all transfers had been transferred. Reported-by: Tom van der Woerdt Fixes #4316 Closes #4317
2019-08-29curl: fix include conditionslufia
2019-08-20cleanup: remove DOT_CHAR completelyDaniel Stenberg
Follow-up to f9c7ba9096ec The use of DOT_CHAR for ".ssh" was probably a mistake and is removed now. Pointed-out-by: Gisle Vanem Bug: https://github.com/curl/curl/pull/4230#issuecomment-522960638 Closes #4247
2019-08-08CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directlyDaniel Stenberg
Even though it cannot fall-back to a lower HTTP version automatically. The safer way to upgrade remains via CURLOPT_ALTSVC. CURLOPT_H3 no longer has any bits that do anything and might be removed before we remove the experimental label. Updated the curl tool accordingly to use "--http3". Closes #4197
2019-08-07curl: make use of CURLINFO_RETRY_AFTER when retryingDaniel Stenberg
If a Retry-After: header was used in the response, that value overrides other retry timing options. Fixes #3794 Closes #4195
2019-08-07curl: use CURLINFO_PROTOCOL to check for HTTP(s)Daniel Stenberg
... instead of CURLINFO_EFFECTIVE_URL to avoid string operations.
2019-08-06curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
Ref: https://github.com/curl/curl/issues/3653 Ref: https://github.com/curl/curl/pull/3790 NOTE: This commit was cherry-picked and is part of a series of commits that added the authzid feature for upcoming 7.66.0. The series was temporarily reverted in db8ec1f so that it would not ship in a 7.65.x patch release. Closes https://github.com/curl/curl/pull/4186
2019-08-06curl_multi_poll: a sister to curl_multi_wait() that waits moreDaniel Stenberg
Repeatedly we see problems where using curl_multi_wait() is difficult or just awkward because if it has no file descriptor to wait for internally, it returns immediately and leaves it to the caller to wait for a small amount of time in order to avoid occasional busy-looping. This is often missed or misunderstood, leading to underperforming applications. This change introduces curl_multi_poll() as a replacement drop-in function that accepts the exact same set of arguments. This function works identically to curl_multi_wait() - EXCEPT - for the case when there's nothing to wait for internally, as then this function will by itself wait for a "suitable" short time before it returns. This effectiely avoids all risks of busy-looping and should also make it less likely that apps "over-wait". This also changes the curl tool to use this funtion internally when doing parallel transfers and changes curl_easy_perform() to use it internally. Closes #4163
2019-07-30curl: remove outdated commentDaniel Stenberg
Turned bad with commit b8894085000 Reported-by: niallor on github Fixes #4172 Closes #4173
2019-07-29curl: avoid uncessary libcurl timeouts (in parallel mode)Daniel Stenberg
When curl_multi_wait() returns OK without file descriptors to wait for, it might already have done a long timeout. Closes #4159
2019-07-23tool_operate: fix implicit call to easysrc_cleanupJay Satiro
easysrc_cleanup is only defined when CURL_DISABLE_LIBCURL_OPTION is not defined, and prior to this change would be called regardless. Bug: https://github.com/curl/curl/pull/3804#issuecomment-513922637 Reported-by: Marcel Raad Closes https://github.com/curl/curl/pull/4142
2019-07-22curl:create_transfers check return code from curl_easy_setoptDaniel Stenberg
From commit b8894085 Pointed out by Coverity CID 1451703 Closes #4134
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-21curl: remove dead codeDaniel Stenberg
The loop never loops (since b889408500), pointed out by Coverity (CID 1451702) Closes #4133
2019-07-20curl: support parallel transfersDaniel Stenberg
This is done by making sure each individual transfer is first added to a linked list as then they can be performed serially, or at will, in parallel. Closes #3804
2019-06-24curl: skip CURLOPT_PROXY_CAPATH for disabled-proxy buildsKoen Dergent
Closes #4061
2019-06-18curl: improved skip-setopt-options when built with disabled featuresDaniel Stenberg
Reduces #ifdefs in src/tool_operate.c Follow-up from 4e86f2fc4e6 Closes #3936
2019-05-25Revert all SASL authzid (new feature) commitsJay Satiro
- Revert all commits related to the SASL authzid feature since the next release will be a patch release, 7.65.1. Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined for the next release, assuming it would be a feature release 7.66.0. However instead the next release will be a patch release, 7.65.1 and will not contain any new features. After the patch release after the reverted commits can be restored by using cherry-pick: git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690 Details for all reverted commits: Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()." This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a. Revert "tests: Fix the line endings for the SASL alt-auth tests" This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221. Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples" This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75. Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool" This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817. Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID" This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
2019-05-22curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
2019-05-18curl: make code work with protocol-disabled libcurlDaniel Stenberg
Closes #3844
2019-05-16cleanup: remove FIXME and TODO commentsDaniel Stenberg
They serve very little purpose and mostly just add noise. Most of them have been around for a very long time. I read them all before removing or rephrasing them. Ref: #3876 Closes #3883
2019-05-16curl: don't set FTP options for FTP-disabled buildsDaniel Stenberg
... since libcurl has started to be totally unaware of options for disabled protocols they now return error. Bug: https://github.com/curl/curl/commit/c9c5304dd4747cbe75d2f24be85920d572fcb5b8#commitcomment-33533937 Reported-by: Marcel Raad Closes #3886
2019-03-15tool_operate: build on AmigaOSChris Young
2019-03-03alt-svc: the curl command line bitsDaniel Stenberg
2019-02-19cli tool: fix mime post with --disable-libcurl-option configure optionPatrick Monnerat
Reported-by: Marcel Raad Fixes #3576 Closes #3583
2019-02-07tool_operate: fix typecheck warningMarcel Raad
Use long for CURLOPT_HTTP09_ALLOWED to fix the following warning: tool_operate.c: In function 'operate_do': ../include/curl/typecheck-gcc.h:47:9: error: call to '_curl_easy_setopt_err_long' declared with attribute warning: curl_easy_setopt expects a long argument for this option [-Werror] Closes https://github.com/curl/curl/pull/3534
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-19curl -J: do not append to the destination fileDaniel Stenberg
Reported-by: Kamil Dudka Fixes #3380 Closes #3381
2018-11-20ssl: replace all internal uses of CURLE_SSL_CACERTHan Han
Closes #3291
2018-11-07curl: fix --local-port integer overflowDaniel Stenberg
The tool's local port command line range parser didn't check for integer overflows and could pass "weird" data to libcurl for this option. libcurl however, has a strict range check for the values so it rejects anything outside of the accepted range. Reported-by: Brian Carpenter Closes #3242
2018-09-06curl: --doh-url addedDaniel Stenberg
2018-09-03tool_operate: Add http code 408 to transient list for --retryJay Satiro
- Treat 408 request timeout as transient so that curl will retry the request if --retry was used. Closes #2925
2018-08-31tool_operate: Fix setting proxy TLS 1.3 ciphersJay Satiro
2018-08-08ssl: set engine implicitly when a PKCS#11 URI is providedAnderson Toshiyuki Sasaki
This allows the use of PKCS#11 URI for certificates and keys without setting the corresponding type as "ENG" and the engine as "pkcs11" explicitly. If a PKCS#11 URI is provided for certificate, key, proxy_certificate or proxy_key, the corresponding type is set as "ENG" if not provided and the engine is set to "pkcs11" if not provided. Acked-by: Nikos Mavrogiannopoulos Closes #2333
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 08:56:18 +0000