Age | Commit message (Collapse) | Author |
|
Closes #3291
|
|
The partial struct initialization in 397664a065abffb7c3445ca9 caused
a warning on uninitialized MODULEENTRY32 struct members:
/src/tool_doswin.c:681:3: warning: missing initializer for field
'th32ModuleID' of 'MODULEENTRY32 {aka struct tagMODULEENTRY32}'
[-Wmissing-field-initializers]
This is sort of a bogus warning as the remaining members will be set
to zero by the compiler, as all omitted members are. Nevertheless,
remove the warning by omitting all members and setting the dwSize
members explicitly.
Closes #3254
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Jay Satiro <raysatiro@yahoo.com>
|
|
Commit 5bfaa86ceb3c2a9ac474a928e748c4a86a703b33 introduced a new
compiler warning on Windows cross compilation with GCC. See below
for an example of the warning from the autobuild logs (whitespace
edited to fit):
/src/tool_cb_wrt.c:175:9: warning: cast from function call of type
'intptr_t {aka long long int}' to non-matching type 'void *'
[-Wbad-function-cast]
(HANDLE) _get_osfhandle(fileno(outs->stream)),
^
Store the return value from _get_osfhandle() in an intermediate
variable and cast the variable in WriteConsoleW() rather than the
function call directly to avoid a compiler warning.
In passing, also add inspection of the MultiByteToWideChar() return
value and return failure in case an error is reported.
Closes #3263
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Viktor Szakats <commit@vszakats.net>
|
|
The end port number in a given range was not included in the range used,
as it is documented to be.
Reported-by: infinnovation-dev on github
Fixes #3251
Closes #3255
|
|
Regression by 52db54869e6.
Reported-by: infinnovation-dev on github
Fixes #3248
Closes #3249
|
|
The tool's local port command line range parser didn't check for integer
overflows and could pass "weird" data to libcurl for this option.
libcurl however, has a strict range check for the values so it rejects
anything outside of the accepted range.
Reported-by: Brian Carpenter
Closes #3242
|
|
Follow-up to e431daf013, as I did the wrong correction for a compiler
warning. It should be a break and not a fall-through.
Pointed-out-by: Frank Gevaerts
|
|
Closes #3115
|
|
- Add an undocumented diagnostic option for Windows to show the full
paths of all loaded modules regardless of whether or not libcurl
initialization succeeds.
This is needed so that in the CI we can get a list of all DLL
dependencies after initialization (when they're most likely to have
finished loading) and then package them as artifacts so that a
functioning build can be downloaded. Also I imagine it may have some use
as a diagnostic for help requests.
Ref: https://github.com/curl/curl/pull/3103
Closes https://github.com/curl/curl/pull/3208
|
|
Fixes #3211
Fixes #3175
Closes #3212
|
|
|
|
As has been outlined in the DEPRECATE.md document, the axTLS code has
been disabled for 6 months and is hereby removed.
Use a better supported TLS library!
Assisted-by: Daniel Gustafsson
Closes #3194
|
|
CVE-2018-16842
Reported-by: Brian Carpenter
Bug: https://curl.haxx.se/docs/CVE-2018-16842.html
|
|
Available in the root, src and lib dirs.
Closes #3163
|
|
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/commit/becfe1233ff2b6b0c3e1b6a10048b55b68c2539f#commitcomment-31008819
Closes #3161
|
|
Detected by Coverity.
Closes #3140
Reviewed-by: Jay Satiro
|
|
Classic MinGW has neither InitializeCriticalSectionEx nor
GetTickCount64, independent of the target Windows version.
Closes https://github.com/curl/curl/pull/3113
|
|
as detected by codespell 1.14.0
Closes https://github.com/curl/curl/pull/3114
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
|
|
Now FILE transfers send headers to the header callback like HTTP and
other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...)
work for FILE in the callbacks.
Makes "curl -i file://.." and "curl -I file://.." work like before
again. Applied the bold header logic to them too.
Regression from c1c2762 (7.61.0)
Reported-by: Shaun Jackman
Fixes #3083
Closes #3101
|
|
Use 'GNUInstallDirs' standard module to set destinations of installed
files.
Use uppercase "CURL" names instead of lowercase "curl" to match standard
'FindCURL.cmake' CMake module:
* https://cmake.org/cmake/help/latest/module/FindCURL.html
Meaning:
* Install 'CURLConfig.cmake' instead of 'curl-config.cmake'
* User should call 'find_package(CURL)' instead of 'find_package(curl)'
Use 'configure_package_config_file' function to generate
'CURLConfig.cmake' file. This will make 'curl-config.cmake.in' template
file smaller and handle components better. E.g. current configuration
report no error if user specified unknown components (note: new
configuration expects no components, report error if user will try to
specify any).
Closes https://github.com/curl/curl/pull/2849
|
|
Enabled Console VT support (if running OS supports VT) in tool_main.c.
Fixes #3008
Closes #3011
|
|
- replace tabs with spaces where possible
- remove line ending spaces
- remove double/triple newlines at EOF
- fix a non-UTF-8 character
- cleanup a few indentations/line continuations
in manual examples
Closes https://github.com/curl/curl/pull/3037
|
|
Closes https://github.com/curl/curl/pull/3031
|
|
Closes #2994
|
|
to help user understand what the problem is
Reported-by: Daniel Shahaf
Fixes #2763
Closes #2977
|
|
Closes #2963
|
|
|
|
- Treat 408 request timeout as transient so that curl will retry the
request if --retry was used.
Closes #2925
|
|
|
|
Patch-by: Jay Satiro
Detected by Coverity
Fixes #2739
Closes #2912
|
|
This enables level 4 instead of the default level 3, which of the
currently used comments only allows /* FALLTHROUGH */ to silence the
warning.
Closes https://github.com/curl/curl/pull/2747
|
|
This warning used to be enabled only for clang as it's a bit stricter
on GCC. Silence the remaining occurrences and enable it on GCC too.
Closes https://github.com/curl/curl/pull/2747
|
|
Closes https://github.com/curl/curl/pull/2747
|
|
... simply because this is usually a sign of the user having omitted the
file name and the next option is instead "eaten" by the parser as a file
name.
Add test1268 to verify
Closes #2885
|
|
Pointed-out-by: Rikard Falkeborn
Closes https://github.com/curl/curl/pull/2860
|
|
This allows the use of PKCS#11 URI for certificates and keys without
setting the corresponding type as "ENG" and the engine as "pkcs11"
explicitly. If a PKCS#11 URI is provided for certificate, key,
proxy_certificate or proxy_key, the corresponding type is set as "ENG"
if not provided and the engine is set to "pkcs11" if not provided.
Acked-by: Nikos Mavrogiannopoulos
Closes #2333
|
|
Regression introduced in 7.61.0
Reported-by: Thomas Klausner
Fixes #2783
Closes #2813
|
|
The curl binary would crash if the -H command line option was given a
filename to read using the @filename syntax but that file was empty.
Closes #2797
|
|
Closes #2727
Reviewed-by: Sergei Nikulov
|
|
... the "unbold" sequence doesn't work on the mac Terminal.
Reported-by: Zero King
Fixes #2736
Closes #2738
|
|
- Get rid of variable that was generating false positive warning
(unitialized)
- Fix issues in tests
- Reduce scope of several variables all over
etc
Closes #2631
|
|
Detected using the `codespell` tool (version 1.13.0).
Also secure and fix an URL.
|
|
According to the user survey 2018, not even one out of 670 users use
them. Nobody on the mailing list spoke up for them either.
Closes #2629
|
|
Adds CURLOPT_DISALLOW_USERNAME_IN_URL and --disallow-username-in-url. Makes
libcurl reject URLs with a username in them.
Closes #2340
|
|
* enable it in `src/Makefile.m32`
* enable it in `winbuild/MakefileBuild.vc` if a custom manifest is
_not_ enabled via the existing `EMBED_MANIFEST` option
* enable it for all Windows CMake builds (also disable the built-in
minimal manifest, added by CMake by default.)
For other build systems, add the `-DCURL_EMBED_MANIFEST` option to
the list of RC (Resource Compiler) flags to enable the manifest
included in `src/curl.rc`. This may require to disable whatever
automatic or other means in which way another manifest is added to
`curl.exe`.
Notice that Borland C doesn't support this method due to a
long-pending resource compiler bug. Watcom C may also not handle
it correctly when the `-zm` `wrc` option is used (this option may
be unnecessary though) and regardless of options in certain earlier
revisions of the 2.0 beta version.
Closes https://github.com/curl/curl/pull/1221
Fixes https://github.com/curl/curl/issues/2591
|
|
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS.
curl: added --tls13-ciphers and --proxy-tls13-ciphers
Fixes #2435
Reported-by: zzq1015 on github
Closes #2607
|
|
Closes #2102
|
|
using -DCMAKE_DEBUG_POSTFIX explicitly
fixes #2121, obsoletes #2384
|
|
... and unify the source code to adhere.
Closes #2563
|
|
It is enabled by default, so --no-styled-output will switch off the
detection/use of bold headers.
Closes #2538
|