aboutsummaryrefslogtreecommitdiff
path: root/tests/data/DISABLED
AgeCommit message (Collapse)Author
2016-02-04URLs: follow GitHub project rename (also Travis CI)Viktor Szakats
Closes #632
2015-11-20tests: Re-enabled tests 889 and 890 following POP3 fixSteve Holme
2015-11-15tests: Disabled 889 and 890 until we support POP3 continuation responsesSteve Holme
As POP3 final and continuation responses both begin with a + character, and both the finalcode and contcode variables in SASLprotoc are set as such, we cannot tell the difference between them when we are expecting an optional continuation from the server such as the following: + something else from the server +OK final response Disabled these tests until such a time we can tell the responses apart.
2015-09-23tests: disable 1510 due to CI-problems on githubDaniel Stenberg
2015-09-20tests: disable 1801 until fixedDaniel Stenberg
It is unreliable and causes CI problems on github Closes #380
2014-11-30curl tool: Enable support for the SMB protocolBill Nagel
This patch enables SMB/CIFS support in the curl command-line tool.
2014-11-29tests: Disable test 1013 until SMB is fully addedSteve Holme
2014-03-30DISABLED: 836, 882 and 938 hangDaniel Stenberg
2014-02-11tests: Disabled broken test 1316Dan Fandrich
See http://curl.haxx.se/mail/lib-2014-02/0004.html for a discussion on the problem.
2014-02-09tests: Re-enabled IMAP tests that require URL specific option supportSteve Holme
2013-11-03tests: Disable IMAP CLOSE and EXPUNGE command testsSteve Holme
This is temporary until curl supports either multiple custom commands or post-quote commands in IMAP.
2013-08-10DISABLED: shut of test 1512 for nowDaniel Stenberg
It shows intermittent failures and I haven't been able to track them down yet. Disable this test for now.
2012-12-25Enable tests 1503, 1504 and 1505Yang Tse
2012-12-25test 1504 and 1505: same as 1502 but with different cleanup sequencesYang Tse
2012-12-23test 1503: same as 1502 but with a different cleanup sequenceYang Tse
2012-08-07sws: close sockets properlyJoe Mason
Fix a bug where closed sockets (fd -1) were left in the all_sockets list, because of missing parens in a pointer arithmetic expression Reenable the tests that were locking up due to this bug.
2012-08-06DISABLED: disable the new tests that do NTLMDaniel Stenberg
The tests 2025, 2028 and 2031 don't work for me so I'll have them disabled for now until we solve the problem.
2012-07-02configure.ac: verify that libmetalink is new enoughYang Tse
Enabling test2017 to test2022.
2012-06-29test2017 to test2022: more metalink testsYang Tse
With this commit, checks done in previous test2017 are now done in test2018. Whole range test2017 to test2022 DISABLED until configure is capable of requiring a new-enough metalink library. Don't try these without mentioned check in place!
2012-06-28Metalink: message updatesTatsuhiro Tsujikawa
Print "parsing (...) OK" only when no warnings are generated. If no file is found in Metalink, treat it FAILED. If no digest is provided, print WARNING in parse_metalink(). Also print validating FAILED after download. These changes make tests 2012 to 2016 pass.
2012-06-27tests: add five more Metalink test casesYang Tse
2012-06-22tests: add another Metalink test caseYang Tse
2012-06-22tests: Enable test2010 and fixed hash valueTatsuhiro Tsujikawa
2012-06-21tests: add six Metalink test casesYang Tse
2012-06-11tests: fix test definitions # 1355, 1363, 1385 and 1393Yang Tse
-i without HTTP protocol shall not include headers in the output
2012-06-09Fixes allowing 26 more test cases in 1334 to 1393 range to succeedYang Tse
2012-06-07Fixes allowing HTTP test cases 1338, 1339, 1368 and 1369 to succeedYang Tse
2012-06-07tests 1364 to 1393: several -o filename -J -i -D combinations for HTTP and FTPYang Tse
2012-06-07tests 1348 to 1363: test definition polishingYang Tse
Verify that the "Saved to filename 'blabla'" message is only displayed when the 'blabla' filename being used _actually_ has been specified by the server in the Content-Disposition header. Use relative path for unintended file creation postcheck.
2012-06-06Disable non-HTTP header related testsYang Tse
These now detect incompleate header data and fail
2012-06-04tests 1356 to 1363: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1356 to 1362 succeed but a write failure is logged in traceNNNN. Currently 1363 fails, so disabled for now.
2012-06-04tests 1348 to 1355: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1348 to 1354 succeed but a write failure is logged in traceNNNN. Currently 1355 fails, so disabled for now.
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-01test 815: verify POP3 dot-first-on-line unescapingDaniel Stenberg
2011-11-29POP3: detect when LIST returns no mailsDaniel Stenberg
By making sure the function can detect an "end of body" sequence immediately on the first line, test 811 is now enabled.
2011-11-28test: added POP3 test with dot-prefixed lineDaniel Stenberg
Test 815 is disabled for now since libcurl currently doesn't unescape such lines the way it should. See mail: http://curl.haxx.se/mail/lib-2011-11/0324.html
2011-11-25test 1211: FTP test to repeat bug #3429299Daniel Stenberg
"Active FTP hangs if server does not open data connection" The server first sends a 150 and then when libcurl waits for the data transfer, the server sends a 425.
2011-11-25FTP tests 1206 - 1209: don't expect QUITDaniel Stenberg
The protocol parts for these tests do not include QUIT simply because the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout error without specificly saying for which connection it concerns, and for timeouts libcurl marks the control channel as "invalid". As this test case times out for the data connection it could still use the control channel.
2011-11-11Active mode FTP test cases with server not establishing data connectionYang Tse
591 -> FTP multi PORT and 425 on upload 592 -> FTP multi PORT and 421 on upload 593 -> FTP multi PORT upload, no data conn and no transient neg. reply 594 -> FTP multi PORT upload, no data conn and no positive prelim. reply 1206 -> FTP PORT and 425 on download 1207 -> FTP PORT and 421 on download 1208 -> FTP PORT download, no data conn and no transient negative reply 1209 -> FTP PORT download, no data conn and no positive preliminary reply
2011-10-26test 589: active FTP upload using multi timeout and EPRT disabled serverYang Tse
2011-08-15test572: fixedDaniel Stenberg
Two problems were fixed: GET_PARAMETER responses that have no body must be 204 response or properly set length to 0. One of the <data> sections had the wrong content-length for its GET_PARAMETER response. Enabled test 572 again.
2011-08-15tests: disable #572Yang Tse
2011-04-28multi-socks: fix connect to proxyDaniel Stenberg
When connecting to a socks or similar proxy we do the proxy handshake at once when we know the TCP connect is completed and we only consider the "connection" complete after the proxy handshake. This fixes test 564 which is now no longer considered disabled. Reported by: Dmitri Shubin Bug: http://curl.haxx.se/mail/lib-2011-04/0127.html
2011-03-17Added support for LISTing a single POP3 messageDan Fandrich
Added tests for a number of POP3 LIST operations, including one that shows a curl problem when listing no messages, so is disabled.
2011-03-13test 582: enabled againDaniel Stenberg
Commit ca37692bf43b5ef should now hopefully make it run
2011-03-13Revert "test582: enabled"Daniel Stenberg
This reverts commit b8478187406cf625c9d0f10b45a082221130cc92.
2011-03-12test582: enabledDaniel Stenberg
2011-03-08sftp-multi: test 582 addedHenry Ludemann
Add test 582 for uploading a file using sftp and the multi interface. (Patch and test slightly tweaked by Daniel Stenberg) Initially marked as disabled until it is fixed in the source.
2010-08-10parse_remote_port: fix ;type= URL suffix over HTTP proxyDaniel Stenberg
Test 563 is enabled now and verifies that the combo FTP type=A URL, CURLOPT_PORT set and proxy work fine. As a bonus I managed to remove the somewhat odd FTP check in parse_remote_port() and instead converted it to a better and more generic 'slash_removed' struct field. Checking the ->protocol field isn't right since when an FTP:// URL is sent over a HTTP proxy, the protocol is HTTP but the URL was handled by the FTP code and thus slash_removed is set TRUE for this case.
2010-03-24remove the CVSish $Id$ linesDaniel Stenberg