aboutsummaryrefslogtreecommitdiff
path: root/tests/data/Makefile.am
AgeCommit message (Collapse)Author
2006-11-25added the new test 282Daniel Stenberg
2006-11-01test 518 is all about testing libcurl functionalityYang Tse
when more than FD_SETSIZE file descriptors are open. This means that if for any reason we are not able to open more than FD_SETSIZE file descriptors then test 518 should not be run. test 537 is all about testing libcurl functionality when the system has nearly exhausted the number of free file descriptors. Test 537 will try to run with very few free file descriptors.
2006-10-25Fixed CURLOPT_FAILONERROR to return CURLE_HTTP_RETURNED_ERROR even for theDaniel Stenberg
case when 401 or 407 are returned, *IF* no auth credentials have been given. The CURLOPT_FAILONERROR option is not possible to make fool-proof for 401 and 407 cases when auth credentials is given, but we've now covered this somewhat more. You might get some amounts of headers transferred before this situation is detected, like for when a "100-continue" is received as a response to a POST/PUT and a 401 or 407 is received immediately afterwards. Added test 281 to verify this change.
2006-10-09Bogdan Nicula's second test case (posted Sun, 08 Oct 2006) converted to testDaniel Stenberg
case 535 and it now runs fine. Again a problem with the pipelining code not taking all possible (error) conditions into account.
2006-10-08test 534 added in an attempt to repeat Bogdan Nicula's bug...Daniel Stenberg
2006-10-04Dmitriy Sergeyev provided an example source code that crashed CVS libcurlDaniel Stenberg
but that worked nicely in 7.15.5. I converted it into test case 532 and fixed the problem.
2006-09-30Support for FTP third party transfers is now droppedDaniel Stenberg
2006-09-28Reported in #1561470 (http://curl.haxx.se/bug/view.cgi?id=1561470), libcurlDaniel Stenberg
would crash if a bad function sequence was used when shutting down after using the multi interface (i.e using easy_cleanup after multi_cleanup) so precautions have been added to make sure it doesn't any more - test case 529 was added to verify.
2006-09-23added simple test of --ftp-alternative-to-userDaniel Stenberg
2006-09-21Added test case 531 in an attempt to repeat bug report #1561470Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1561470) that is said to crash when an FTP upload fails with the multi interface. It did not, but I made a failed upload still assume the control connection to be fine.
2006-09-20Armel Asselin fixed problems when you gave a proxy URL with user name andDaniel Stenberg
empty password or no password at all. Test case 278 and 279 were added to verify.
2006-09-13Added a generic way to disable test cases when "all" is run, and added theDaniel Stenberg
FTP 3rd party transfers to that file for now until I have them sorted out.
2006-09-08test 530 is the first ever HTTP pipelining test for libcurlDaniel Stenberg
2006-09-07Major overhaul introducing http pipelining support and shared connectionDaniel Stenberg
cache within the multi handle.
2006-08-31added missing testDaniel Stenberg
2006-07-27test case 277 - HTTP RFC1867-type formposting with custom Content-TypeDaniel Stenberg
2006-03-28#1451929 (http://curl.haxx.se/bug/view.cgi?id=1451929) detailed a bug thatDaniel Stenberg
occurred when asking libcurl to follow HTTP redirects and the original URL had more than one question mark (?). Added test case 276 to verify.
2006-03-03added test524Daniel Stenberg
2005-10-30test 275 makes a CONNECT through a proxy and then gets two pages from theDaniel Stenberg
same server
2005-10-27Nis Jorgensen filed bug report #1338648Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a feature request, but anyway. It pointed out that --max-redirs did not allow it to be set to 0, which then would return an error code on the first Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS set to 0, or -1 for infinity. Added test case 274 to verify.
2005-10-20Dave Dribin made libcurl understand and handle cases when the serverDaniel Stenberg
(wrongly) sends *two* WWW-Authenticate headers for Digest. While this should never happen in a sane world, libcurl previously got into an infinite loop when this occurred. Dave added test 273 to verify this.
2005-10-05added test case 272 for -z download over FTP when the timestamp is identicalDaniel Stenberg
to the remote one
2005-09-19added test 271Daniel Stenberg
2005-09-04Added FTP_SKIP_PASV_IP and --ftp-skip-pasv-ipDaniel Stenberg
2005-08-24Toby Peterson added CURLOPT_IGNORE_CONTENT_LENGTH to the library, accessibleDaniel Stenberg
from the command line tool with --ignore-content-length. This will make it easier to download files from Apache 1.x (and similar) servers that are still having problems serving files larger than 2 or 4 GB. When this option is enabled, curl will simply have to wait for the server to close the connection to signal end of transfer. I wrote test case 269 that runs a simple test that this works.
2005-08-12added test 268 that makes curl -d @nonexistingDaniel Stenberg
2005-08-11do a POST with NTLM and add two custom headersDaniel Stenberg
2005-07-12Adrian Schuur added trailer support in the chunked encoding stream. TheDaniel Stenberg
trailer is then sent to the normal header callback/stream.
2005-07-03Andrew Bushnell provided enough info for me to tell that we badly needed toDaniel Stenberg
fix the CONNECT authentication code with multi-pass auth methods (such as NTLM) as it didn't previously properly ignore response-bodies - in fact it stopped reading after all response headers had been received. This could lead to libcurl sending the next request and reading the body from the first request as response to the second request. (I also renamed the function, which wasn't strictly necessary but...) The best fix would to once and for all make the CONNECT code use the ordinary request sending/receiving code, treating it as any ordinary request instead of the special-purpose function we have now. It should make it better for multi-interface too. And possibly lead to less code... Added test case 265 for this. It doesn't work as a _really_ good test case since the test proxy is too stupid, but the test case helps when running the debugger to verify.
2005-06-22David Shaw's fix that unifies proxy string treatment so that a proxy givenDaniel Stenberg
with CURLOPT_PROXY can use a http:// prefix and user + password. The user and password fields are now also URL decoded properly. Test case 264 added to verify.
2005-05-31Todd Kulesza reported a flaw in the proxy option, since a numerical IPv6Daniel Stenberg
address was not possible to use. It is now, but requires it written RFC2732-style, within brackets - which incidently is how you enter numerical IPv6 addresses in URLs. Test case 263 added to verify.
2005-05-29Eric Cooper reported about a problem with HTTP servers that responds withDaniel Stenberg
binary zeroes within the headers. They confused libcurl to do wrong so the downloaded headers become incomplete. The fix is now verified with test case 262.
2005-05-24add test case 261, response code 226 to TYPEDaniel Stenberg
2005-05-18Bug report #1204435 identified a problem with malformed URLs likeDaniel Stenberg
"http://somehost?data" as it added a slash too much in the request ("GET /?data/"...). Added test case 260 to verify.
2005-05-06Added two test cases for multipart formpost over a proxy with --anyauth. OurDaniel Stenberg
HTTP test server is a bit limited though, as it never responds to the POST request until all data has been sent (and received)...
2005-04-25Fred New reported a bug where we used Basic auth and user name and password inDaniel Stenberg
.netrc, and when following a Location: the subsequent requests didn't properly use the auth as found in the netrc file. Added test case 257 to verify my fix.
2005-04-22test 256 is like test 38 but with proxy + proxy authDaniel Stenberg
2005-04-18Olivier reported that even though he used CURLOPT_PORT, libcurl clearly stillDaniel Stenberg
used the default port. He was right. I fixed the problem and added the test cases 521, 522 and 523 to verify the fix.
2005-04-18Modified the FTP server to use the new 'sockfilt' program to do all the socketDaniel Stenberg
level stuff. The FTP server communicates with sockfilt using perl's open2(). This enables easier IPv6 support and hopefully FTP-SSL support in the future. Added four test cases for FTP-ipv6.
2005-04-14Two new slowdown tests for better testing of the FTP response reader functionDaniel Stenberg
when the response come in many small chunks.
2005-04-08fixed the 304 response-with-content-length problem reported by Cory NelsonDaniel Stenberg
2005-04-05test time-conditioned FTP uploadsDaniel Stenberg
2005-04-03Hardeep Singh reported a problem doing HTTP POST with Digest. (It was actuallyDaniel Stenberg
also affecting NTLM and Negotiate.) It turned out that if the server responded with 100 Continue before the initial 401 response, libcurl didn't take care of the response properly. Test case 245 and 246 added to verify this.
2005-04-03Test 245 was just added in an attempt to repeat Hardeep Singh's recent bug.Daniel Stenberg
But this works just fine on my host. Plain HTTP POST using Digest.
2005-03-28Based on Augustus Saunders' comments and findings, the HTTP output authDaniel Stenberg
function was fixed to use the proper proxy authentication when multiple ones were added as accepted. test 239 and test 243 were added to repeat the problems and verify the fixes.
2005-03-15test EPSV and PASV response handling when they get well-formated data backDaniel Stenberg
but using illegal values
2005-03-08Dominick Meglio reported that using CURLOPT_FILETIME when transferring a FTPDaniel Stenberg
file got a Last-Modified: header written to the data stream, corrupting the actual data. This was because some conditions from the previous FTP code was not properly brought into the new FTP code. I fixed and I added test case 520 to verify. (This bug was introduced in 7.13.1)
2005-03-07test 236: FTP resume upload but denied access to remote fileDaniel Stenberg
2005-03-04Added test case 235 that makes a resumed upload of a file that isn't presentDaniel Stenberg
on the remote side. This then converts the operation to an ordinary STOR upload. This was requested/pointed out by Ignacio Vazquez-Abrams. It also proved (and I fixed) a bug in the newly rewritten ftp code (and present in the 7.13.1 release) when trying to resume an upload and the servers returns an error to the SIZE command. libcurl then loops and sends SIZE commands infinitely.
2005-02-19added test case 234 which is like 233 but uses --location-trusted instead soDaniel Stenberg
thus the second request to the new host will use authentication fine