aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-03-13test509: libcurl initialization with memory callbacks and actual usageYang Tse
2013-03-11test806: Added CRLF to reply data to be compliant with RFC-822Steve Holme
2013-03-11test805: added crlf newlines to make data size matchDaniel Stenberg
since mails sent are supposed to have CRLF line endings I added them and now the data size after (\Seen) matches again properly
2013-03-11test: fix newline for the data check of 807Daniel Stenberg
2013-03-11test801 to test807: fix protocol section line endingsYang Tse
2013-03-10Makefile.am: Corrected a couple of spurious tab charactersSteve Holme
Corrected a couple of tab characters between test702 and test703, and between test900 and test901 which should be spaces.
2013-03-10imap: Added test807 for custom request functionality (STORE)Jiri Hruska
2013-03-10imap: Added test806 for IMAP (folder) LIST commandJiri Hruska
2013-03-10imap: Added test805 for APPEND functionalityJiri Hruska
2013-03-10imap: Added test804 for skipping SELECT if in the same mailboxJiri Hruska
2013-03-10imap: Added test802 and test803 for UIDVALIDITY verificationJiri Hruska
Added one test for a request with matching UIDVALIDITY and one which is a mismatched request that will fail.
2013-03-10imap: Added test801 for UID and SECTION URL parametersJiri Hruska
2013-03-10Makefile.am: Corrected end of line filler characterSteve Holme
The majority of lines, that specify a test file for inclusion, end with a tab character before the slash whilst some end with a space. Corrected those that end with a space to end with a tab character as well.
2013-03-10email-tests: Updated the test data that corresponds to the test numberSteve Holme
Finished segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the IMAP test to be 800Steve Holme
Continued segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the SMTP tests to be in the range 900-906Steve Holme
Continued segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the POP3 tests to be in the range 850-857Steve Holme
Started segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-06imap: Fixed test801 and test1321 to specify a message UIDJiri Hruska
Just a folder list would be retrieved if UID was not specified now.
2013-02-23imap: Added the ability to FETCH a specific UID and SECTIONJiri Hruska
Updated the FETCH command to send the UID and SECTION parsed from the URL. By default the BODY specifier doesn't include a section, BODY[] is now sent whereas BODY[TEXT] was previously sent. In my opinion retrieving just the message text is rarely useful when dealing with emails, as the headers are required for example, so that functionality is not retained. In can however be simulated by adding SECTION=TEXT to the URL. Also updated test801 and test1321 due to the BODY change.
2013-02-11SOCKS: fix socks proxy when noproxy matchedulion
Test 1212 added to verify Bug: http://curl.haxx.se/bug/view.cgi?id=1190
2013-02-10Fix NULL pointer reference when closing an unused multi handle.Linus Nielsen Feltzing
2013-02-09smtp: Fixed an issue when processing EHLO failure responses (Part 3)Steve Holme
Follow up fix to commit 62bd21746443 to cater for servers that don't respond with a 250 in their EHLO responses. Additionally updated the SMTP tests to respond with a 250 response code as per RFC5321.
2013-02-08DONE: consider callback-aborted transfers prematureDaniel Stenberg
This bug report properly identified that when doing SMTP and aborting the transfer with a callback, it must be considered aborted prematurely by the code to avoid QUIT etc to be attempted as that would cause a hang. The new test case 1507 verifies this behavior. Reported by: Patricia Muscalu Bug: http://curl.haxx.se/bug/view.cgi?id=1184
2013-02-07imap: Changed response tag generation to be completely uniqueSteve Holme
Updated the automatic response tag generation to follow the examples given in RC3501, which list a 4 character string such as A001, A002, etc. As a unique identifier should be generated for each command the string generation is based on the connection id and the incrementing command id.
2013-02-05CURLMOPT_MAXCONNECTS: restore functionalityLinus Nielsen Feltzing
When a connection is no longer used, it is kept in the cache. If the cache is full, the oldest idle connection is closed. If no connection is idle, the current one is closed instead.
2013-01-22formpost: support quotes, commas and semicolon in file namesUlion
- document the double-quote and backslash need be escaped if quoting. - libcurl formdata escape double-quote in filename by backslash. - curl formparse can parse filename both contains '"' and ',' or ';'. - curl now can uploading file with ',' or ';' in filename. Bug: http://curl.haxx.se/bug/view.cgi?id=1171
2013-01-17always-multi: always use non-blocking internalsDaniel Stenberg
Remove internal separated behavior of the easy vs multi intercace. curl_easy_perform() is now using the multi interface itself. Several minor multi interface quirks and bugs have been fixed in the process. Much help with debugging this has been provided by: Yang Tse
2013-01-15FTP: reject illegal port numbers in EPSV 229 responsesDaniel Stenberg
2013-01-06imap: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the CAPABILITY command.
2013-01-03writeout: -w now supports remote_ip/port and local_ip/portDaniel Stenberg
Added mention to the curl.1 man page. Test case 1223 verifies remote_ip/port.
2013-01-03test 1222: 8 chars object name generation && test 1221: adjustmentsYang Tse
2013-01-02build and tests: curl_10char_object_name() shell functionYang Tse
lib/objnames.inc provides definition of curl_10char_object_name() shell function. The intended purpose of this function is to transliterate a (*.c) source file name that may be longer than 10 characters, or not, into a string with at most 10 characters which may be used as an OS/400 object name. Test case 1221 does unit testng of this function and also verifies that it is possible to generate distinct short object names for all curl and libcurl *.c source file names. lib/objnames-test.sh is the shell script used for test case 1221. tests/runtests.pl modified to accept shell script test cases. More details inside lib/objnames.inc and lib/objnames-test.sh
2012-12-25Enable tests 1503, 1504 and 1505Yang Tse
2012-12-25test 1504 and 1505: same as 1502 but with different cleanup sequencesYang Tse
2012-12-23test 1503: same as 1502 but with a different cleanup sequenceYang Tse
2012-12-23test 1502: OOM handling fixesYang Tse
2012-11-27dd missing NTLM feature for tests 2025, and 2028 to 2032Yang Tse
2012-11-26Remove stray CRLF in chunk-encoded content-free request bodiesFabian Keil
.. that are sent when auth-negotiating before a chunked upload or when setting the 'Transfer-Encoding: chunked' header and intentionally sending no content. Adjust test565 and test1333 accordingly.
2012-11-21Test 206: Use a Content-Length header for the 407 responseFabian Keil
Otherwise curl would have to guess where the body ends.
2012-11-21Test 206: Don't respond to a succesful CONNECT request with a bodyFabian Keil
It's against the spec and caused test failures when header and response were read from the network separately in which case bug #39 wasn't triggered.
2012-11-19Fix comment typos in test 517Fabian Keil
2012-11-19Test 92 and 194: normalize spaces in the Server headersFabian Keil
It makes no difference from curl's point of view but makes it more convenient to use the tests with a lws-normalizing proxy between curl and the test server.
2012-11-19Add a HOSTIP precheck for tests 31 and 1105Fabian Keil
They currently only work for 127.0.0.1 which is hardcoded and can't be easily changed.
2012-11-19Let test 8 work as long as %HOSTIP ends with ".0.0.1"Fabian Keil
.. and add a precheck to skip the test otherwise.
2012-11-19Add --resolve to the keywords and name of test 1318Fabian Keil
This makes it easier to skip it automatically when the test suite is used with external proxies.
2012-11-19Add FTP keywords for a couple of currently keyword-less FTP testsFabian Keil
2012-11-19Add keywords for a couple of currently keyword-less HTTP testsFabian Keil
2012-11-19Use carriage returns in all headers in test 31Fabian Keil
Trailing spaces were left unmodifed, assuming they were intentional.
2012-11-19Do not mix CRLF and LF header endings in a couple of HTTP testsFabian Keil
Consistently use CRLF instead. The mixed endings weren't documented so I assume they were unintentional. This change doesn't matter for curl itself but makes using the tests with a proxy between curl and the test server more convenient. Tests that consistently use no carriage returns were left unmodified as one can easily work around this.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 15:56:05 +0000