aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2020-04-24test1154: set a proper nameDaniel Stenberg
2020-04-22transfer: Switch PUT to GET/HEAD on 303 redirectJay Satiro
Prior to this change if there was a 303 reply to a PUT request then the subsequent request to respond to that redirect would also be a PUT. It was determined that was most likely incorrect based on the language of the RFCs. Basically 303 means "see other" resource, which implies it is most likely not the same resource, therefore we should not try to PUT to that different resource. Refer to the discussions in #5237 and #5248 for more information. Fixes https://github.com/curl/curl/issues/5237 Closes https://github.com/curl/curl/pull/5248
2020-04-20tests: add %NOLISTENPORT and use itDaniel Stenberg
The purpose with this variable is to provide a port number that is reasonably likely to not have a listener on the local host so that tests can try connect failures against it. It uses port 47 - "reserved" according to IANA. Updated six tests to use it instead of the previous different ports. Assisted-by: Emil Engler Closes #5270
2020-04-20mqtt: improve the state machineDaniel Stenberg
To handle PUBLISH before SUBACK and more. Updated the existing tests and added three new ones. Reported-by: Christoph Krey Bug: https://curl.haxx.se/mail/lib-2020-04/0021.html Closes #5246
2020-04-20ensure all references to ports are replaced by varsxquery
2020-04-20add more alt-svc test coveragexquery
2020-04-20test1247: use http server to get the port number setDaniel Stenberg
Follow-up to 0f5db7b263f
2020-04-19mime: properly check Content-Type even if it has parametersPatrick Monnerat
New test 669 checks this fix is effective. Fixes #5256 Closes #5258 Reported-by: thanhchungbtc on github
2020-04-18test1245: make it work with dynamic FTP server portDaniel Stenberg
2020-04-18test1055: make it work with dynamic FTP portDaniel Stenberg
2020-04-18test1028: make it run on dynamic FTP server portDaniel Stenberg
2020-04-18test1056: work with dynamic HTTP ipv6 portDaniel Stenberg
2020-04-18test1448: work with dynamic HTTP server portDaniel Stenberg
2020-04-18tests: introduce preprocessed test casesDaniel Stenberg
The runtests script now always performs variable replacement on the entire test source file before the test gets executed, and saves the updated version in a temporary file (log/test[num]) so that all test case readers/servers can use that version (if present) and thus enjoy the powers of test case variable substitution. This is necessary to allow complete port number freedom. Test 309 is updated to work with a non-fixed port number thanks to this.
2020-04-18tests: make 2006-2010 handle different port number lengthsDaniel Stenberg
2020-04-14test2043: use revoked.badssl.com instead of revoked.grc.comMarc Hoersken
The certificate of revoked.grc.com has expired on 2020-04-13. Reviewed-by: Jay Satiro Closes #5233
2020-04-14tests: add four MQTT tests 1190 - 1193Daniel Stenberg
2020-04-13test1908: avoid using fixed port number in test dataDaniel Stenberg
Closes #5225
2020-04-11test1148: tolerate progress updates better (again)Jay Satiro
- Ignore intermediate progress updates. - Support locales that use a character other than period as decimal separator (eg 100,0%). test1148 checks that the progress finishes at 100% and has the right bar width. Prior to this change the test assumed that the only progress reported for such a quick transfer was 100%, however in rare instances (like in the CI where transfer time can slow considerably) there may be intermediate updates. For example, below is stderrlog1148 from a failed CI run with explicit \r and \n added (it is one line; broken up so that it's easier to understand). \r \r################################## 48.3% \r######################################################################## 100.0% \n Closes https://github.com/curl/curl/pull/5194
2020-04-08tests: verify split initial HTTP requests with CURL_SMALLREQSENDDaniel Stenberg
test1294: "split request" being when the entire request isn't sent in the first go, and the remainder is sent in the PERFORM state. A GET request is otherwise not sending anything during PERFORM. test1295: same kind of split but with POST Closes #5197
2020-04-05test1566: verify --etag-compare that gets a 304 backDaniel Stenberg
Verifies the fix in #5183 Closes #5186
2020-04-05curl: allow both --etag-compare and --etag-save with same file nameKwon-Young Choi
This change inverse the order of processing for the --etag-compare and --etag-save option to process first --etag-compare. This in turn allows to use the same file name to compare and save an etag. The original behavior of not failing if the etag file does not exists is conserved. Fixes #5179 Closes #5180
2020-03-29test1177: verify that all the CURL_VERSION_ bits are documentedDaniel Stenberg
2020-03-27writeout_json: Fix data type issuesMichael Kaufmann
Load long values correctly (e.g. for http_code). Use curl_off_t (not long) for: - size_download (CURLINFO_SIZE_DOWNLOAD_T) - size_upload (CURLINFO_SIZE_UPLOAD_T) The unit for these values is bytes/second, not microseconds: - speed_download (CURLINFO_SPEED_DOWNLOAD_T) - speed_upload (CURLINFO_SPEED_UPLOAD_T) Fixes #5131 Closes #5152
2020-03-24copyright: fix out-of-date copyright ranges and missing headersDaniel Stenberg
Reported by the new script 'scripts/copyright.pl'. The script has a regex whitelist for the files that don't need copyright headers. Removed three (mostly usesless) README files from docs/ Closes #5141
2020-03-22getinfo: provide CURLINFO_HEADER_SIZE and CURLINFO_REQUEST_SIZE overrideDaniel Stenberg
To let debug-builds return fake values, like in test 970. Ref: #5131 Closes #5136
2020-03-22test970: improve the testDaniel Stenberg
- send more data to make problems more obvious - don't start the data with minus, it makes diffs harder to read - skip the headers in the stdout comparison - save to a file name to also verify 'filename_effective' Ref: #5131
2020-03-20tests: add test 430, 431 and 432 to verify the --config fixDaniel Stenberg
Verify the fixes in 4e0b4fee4
2020-03-20test2100: fix static port instead of dynamic value being usedMarc Hoersken
2020-03-20test970: fix static ip:port instead of dynamic values being usedMarc Hoersken
2020-03-19tests: make Python-based servers compatible with Python 2 and 3Marc Hoersken
Update smbserver.py and negtelnetserver.py to be compatible with Python 3 while staying backwards-compatible to support Python 2. Fix string encoding and handling of echoed and transferred data. Tested with both Python 2.7.17 and Python 3.7.7 Reported-by: Daniel Stenberg Assisted-by: Kamil Dudka Reviewed-by: Marcel Raad Fixes #5104 Closes #5110
2020-03-18schannel: add "best effort" revocation check optionJohannes Schindelin
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and --ssl-revoke-best-effort to allow a "best effort" revocation check. A best effort revocation check ignores errors that the revocation check was unable to take place. The reasoning is described in detail below and discussed further in the PR. --- When running e.g. with Fiddler, the schannel backend fails with an unhelpful error message: Unknown error (0x80092012) - The revocation function was unable to check revocation for the certificate. Sadly, many enterprise users who are stuck behind MITM proxies suffer the very same problem. This has been discussed in plenty of issues: https://github.com/curl/curl/issues/3727, https://github.com/curl/curl/issues/264, for example. In the latter, a Microsoft Edge developer even made the case that the common behavior is to ignore issues when a certificate has no recorded distribution point for revocation lists, or when the server is offline. This is also known as "best effort" strategy and addresses the Fiddler issue. Unfortunately, this strategy was not chosen as the default for schannel (and is therefore a backend-specific behavior: OpenSSL seems to happily ignore the offline servers and missing distribution points). To maintain backward-compatibility, we therefore add a new flag (`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option (`--ssl-revoke-best-effort`) to select the new behavior. Due to the many related issues Git for Windows and GitHub Desktop, the plan is to make this behavior the default in these software packages. The test 2070 was added to verify this behavior, adapted from 310. Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com> Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Closes https://github.com/curl/curl/pull/4981
2020-03-17test 970: verify --write-out '%{json}'Daniel Stenberg
Makes curl_easy_getinfo() of "variable" numerical content instead return the number set in the env variable `CURL_TIME`. Makes curl_version() of "variable" textual content. This guarantees a stable version string which can be tested against. Environment variable `CURL_VERSION` defines the content. Assisted-by: Mathias Gumz
2020-03-17DISABLED: disable test 323Daniel Stenberg
The test uses SRP to "a server not supporting it" but modern stunnel versions will silently accept it and remain happy. The test is therefore faulty. I haven't figured out how to make stunnel explicitly reject SRP-using connects. Reported-by: Marc Hörsken Fixes #5105 Closes #5113
2020-03-15tests: fix verification of stdout in test 1452 due to newlineMarc Hoersken
Fixes test1452:41:1: error: missing </stdout> tag before </verify>
2020-03-15tests: remove python_dependencies for smbserver from our treeMarc Hoersken
Users of the SMB tests will have to install impacket manually. Reasoning: our in-tree version of impacket was quite outdated and only compatible with Python 2 which is already end-of-life. Upgrading to Python 3 and a compatible impacket version would require to import additional Python-only and CPython-extension dependencies. This would have hindered portability enormously. Closes #5094
2020-03-13server/getpart: make the "XML-parser" stricterDaniel Stenberg
When extracting a <section> <part> and there's no </part> before </section>, this now outputs an error and returns a wrong string to make users spot the mistake. Ref: #5070 Closes #5071
2020-03-11tests/data: Fix some XML formatting issues in test casesDan Fandrich
This allows these test files to pass xmllint.
2020-03-10test1129: fix invalid case of closing XML-tag and Content-LengthMarc Hoersken
Fixes #5070 Closes #5072
2020-03-10tests/data: fix static ip instead of dynamic value being usedMarc Hoersken
Follow up to 94ced8e
2020-03-10tests/data: fix static ip:port instead of dynamic values being usedMarc Hoersken
Closes #5065
2020-03-09sftp: fix segfault regression introduced by #4747Jim Fuller
This fix adds a defensive check for the case where the char *name in struct libssh2_knownhost is NULL Fixes #5041 Closes #5062
2020-03-07mime: fix the binary encoder to handle large data properlyPatrick Monnerat
New test 666 checks this is effective. As upload buffer size is significant in this kind of tests, shorten it in similar test 652. Fixes #4860 Closes #4833 Reported-by: RuurdBeerstra on github
2020-03-07mime: do not perform more than one read in a rowPatrick Monnerat
Input buffer filling may delay the data sending if data reads are slow. To overcome this problem, file and callback data reads do not accumulate in buffer anymore. All other data (memory data and mime framing) are considered as fast and still concatenated in buffer. As this may highly impact performance in terms of data overhead, an early end of part data check is added to spare a read call. When encoding a part's data, an encoder may require more bytes than made available by a single read. In this case, the above rule does not apply and reads are performed until the encoder is able to deliver some data. Tests 643, 644, 645, 650 and 654 have been adapted to the output data changes, with test data size reduced to avoid the boredom of long lists of 1-byte chunks in verification data. New test 667 checks mimepost using single-byte read callback with encoder. New test 668 checks the end of part data early detection. Fixes #4826 Reported-by: MrdUkk on github
2020-03-07mime: latch last read callback status.Patrick Monnerat
In case a read callback returns a status (pause, abort, eof, error) instead of a byte count, drain the bytes read so far but remember this status for further processing. Takes care of not losing data when pausing, and properly resume a paused mime structure when requested. New tests 670-673 check unpausing cases, with easy or multi interface and mime or form api. Fixes #4813 Reported-by: MrdUkk on github
2020-03-07libssh: Fix matching user-specified MD5 hex keyJay Satiro
Prior to this change a match would never be successful because it was mistakenly coded to compare binary data from libssh to a user-specified hex string (ie CURLOPT_SSH_HOST_PUBLIC_KEY_MD5). Reported-by: fds242@users.noreply.github.com Fixes https://github.com/curl/curl/issues/4971 Closes https://github.com/curl/curl/pull/4974
2020-03-02tests: disable 962, 963 and 964 on WindowsDaniel Stenberg
These tests are also doing UTF-8 SMTP. Follow-up to df207d2dd93b9e73
2020-03-02tests: disable SMTP UTF-8 tests on WindowsSteve Holme
Fixes #4988 Closes #4992
2020-03-02Revert "mime: latch last read callback status."Daniel Stenberg
This reverts commit 87869e38d7afdec3ef1bb4965711458b088e254f. Fixes #5014 Closes #5015 Reopens #4833
2020-03-02Revert "mime: do not perform more than one read in a row"Daniel Stenberg
This reverts commit ed0f357f7d25566110d4302f33759f4ffb5a6f83.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:15:40 +0000