aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2012-06-01tests 1334 to 1345: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-05-30pop3 test server: allow pop3 test server verification to succeed againYang Tse
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further pop3 test server expansion for tests that require CAPA or AUTH support, although this will need some extra work to make it fully functional.
2012-05-27pop3: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the AUTH command. There are two ways of detecting them, either by using the AUTH command, that will return -ERR if not supported or by using the CAPA command which will return SASL and the list of mechanisms if supported, not include SASL if SASL authentication is not supported or -ERR if the CAPA command is not supported. As such it seems simpler to use the AUTH command and fallback to normal clear text authentication if the the command is not supported. Additionally updated the test cases to return -ERR when the AUTH command is encountered. Additional test cases will be added when support for the individual authentication mechanisms is added.
2012-05-25Made -D option work with -O and -J.Tatsuhiro Tsujikawa
To achieve this, first new structure HeaderData is defined to hold necessary data to perform header-related work. Then tool_header_cb now receives HeaderData pointer as userdata. All header-related work (currently, dumping header and Content-Disposition inspection) are done in this callback function. HeaderData.outs->config is used to determine whether each work is done. Unit tests were also updated because after this change, curl code always sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA. Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
2012-04-20HTTP: empty chunked POST ended up in two zero size chunksDaniel Stenberg
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the size of the POST was zero length, it made libcurl first send a zero chunk and then the terminating one. This could confuse a receiver and it should rather just send the terminating chunk as it does with this fix. Test case 1333 is added to verify. Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html Reported by: Arnaud Compan
2012-04-05test: added test 1332 that tests --post303Daniel Stenberg
2012-04-05test1331: cookies on a 407 responseDaniel Stenberg
Verify that cookies are sent back even after a 407 response has been received
2012-04-01HTTP: reset expected DL/UL sizes on redirectsDaniel Stenberg
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the download size was known (like with a Content-Length header), but the subsequent URL (transfered after the 3xx page) was chunked encoded, then the previous "known download size" would linger and cause the progress meter to get incorrect information, ie the former value would remain being sent in. This could easily result in downloads that were WAY larger than "expected" and would cause >100% outputs with the curl command line tool. Test case 599 was created and it was used to repeat the bug and then verify the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3510057 Reported by: Michael Wallner
2012-03-26test #1405: support HTTP disabled buildsYang Tse
2012-03-26test #809: Updated error code to match recent pop3 changesSteve Holme
2012-03-23tests #1316 #1319 #1320 #1321: add missing keywordsYang Tse
2012-03-23test #598: add missing keywordsYang Tse
2012-03-22tests #1400 #1401: add missing keywordsYang Tse
2012-03-22test #598: add to Makefile.amYang Tse
2012-03-18tests 140X: fix --libcurl generated source file reading mode for MSYS buildsYang Tse
2012-02-23test: --libcurl fixesDaniel Stenberg
The line endings broke when I saved the three recent patches (my fault, not Colin's) to 'git am' them. Adjusted the stripping of the test program for comparing to also exclude the SSH key file name as that will differ and use a local path name.
2012-02-23Add tests for curl's --libcurl output.Colin Hogben
These tests check the output of the --libcurl option of curl, including the improved option handling added in a related patch.
2012-02-21pop3 test server: send terminating ".CRLF" onlyDaniel Stenberg
With commit 035ef06bda7 applied, the test pop3 server needs to send ".\r\n" as the body terminating sequence and there needs to be a final CRLF in the actual body in the test data file.
2012-02-10parse_proxy: bail out on zero-length proxy names!Daniel Stenberg
The proxy parser function strips off trailing slashes off the proxy name which could lead to a mistaken zero length proxy name which would be treated as no proxy at all by subsequent functions! This is now detected and an error is returned. Verified by the new test 1329. Reported by: Chandrakant Bagul Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
2012-02-07curl_easy_reset: reset the referer stringDaniel Stenberg
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly clear it. Verified with the new test 598 Bug: http://curl.haxx.se/bug/view.cgi?id=3481551 Reported by: Michael Day
2012-02-06curl tool: don't abort glob-loop due to failuresDaniel Stenberg
We want to continue to the next URL to try even on failures returned from libcurl. This makes -f with ranges still get subsequent URLs even if occasional ones return error. This was a regression as it used to work and broke in the 7.23.0 release. Added test case 1328 to verify the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3481223 Reported by: Juan Barreto
2012-01-24tests: test CRLF in URLsDaniel Stenberg
Related to the security vulnerability: CVE-2012-0036 Bug: http://curl.haxx.se/docs/adv_20120124.html
2012-01-18Add two tests for telnet: URLsColin Hogben
Add simple telnet tests which (ab)use the http server. The second test checks for an input file handling bug.
2012-01-14test: verify HTTP response code 308Daniel Stenberg
This newly speced HTTP status code already works as intended in the new spec: http://greenbytes.de/tech/webdav/draft-reschke-http-status-308-02.html Test 1325 is added to verify that the method is kept after the redirect
2012-01-09FTP: CURLE_PARTIAL_FILE should not cause control connection to be closedgsengun
Test 161 updated accordingly
2012-01-04test1320 test1321: avoid User-Agent comparisonYang Tse
2012-01-03tests: test IMAP, POP3 and SMTP over HTTP proxy tunnelDaniel Stenberg
2012-01-03test proxy supports CONNECTDaniel Stenberg
There's a new 'http-proxy' server for tests that runs on a separate port and lets clients do HTTP CONNECT to other ports on the same host to allow us to test HTTP "tunneling" properly. Test cases now have a <proxy> section in <verify> to check that the proxy protocol part matches correctly. Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316 was added.
2011-12-31changed case: use new host name for subsequent HTTP requestsDaniel Stenberg
When a HTTP connection is re-used for a subsequent request without proxy, it would always re-use the Host: header of the first request. As host names are case insensitive it would make curl send another host name case that what the particular request used. Now it will instead always use the most recent host name to always use the desired casing. Added test case 1318 to verify. Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html Reported by: Alex Vinnik
2011-12-23new test: verify --resolveDaniel Stenberg
Test 1317 verifies --resolve (leaked memory) Bug: http://curl.haxx.se/bug/view.cgi?id=3463121 Reported by: "tw84452852"
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-16curl -F: fix multiple file upload with custom typeDaniel Stenberg
Test case 1315 was added to verify this functionality. When passing in multiple files to a single -F, the parser would get all confused if one of the specified files had a custom type= assigned. Reported by: Colin Hogben
2011-12-16New test for multiple file uploadColin Hogben
test 1315 checks correct behaviour when uploading multiple files. Buggy behaviour has been seen where only two attachments are sent.
2011-12-07multi interface: fix block when CONNECT_ONLY option is usedGokhan Sengun
2011-12-05FTP: close callback fixDaniel Stenberg
Keep track of which sockets that are the result of accept() calls and refuse to call the closesocket callback for those sockets. Test case 596 now verifies that the open socket callback is called the same number of times as the closed socket callback for active FTP connections. Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html Reported by: Gokhan Sengun
2011-12-05FTP: call opensocket callback properlyDaniel Stenberg
When the new socket is created for an active connection, it is now done using the open socket callback. Test case 596 was modified to run fine, although it hides the fact that the close callback is still called too many times, as it also gets called for closing sockets that were created with accept().
2011-12-04test: verify the opensocket callback for FTPDaniel Stenberg
test 595: for passive FTP test 596: for active FTP
2011-12-01test 815: verify POP3 dot-first-on-line unescapingDaniel Stenberg
2011-11-29POP3: detect when LIST returns no mailsDaniel Stenberg
By making sure the function can detect an "end of body" sequence immediately on the first line, test 811 is now enabled.
2011-11-29POP3: fix end of body detectionDaniel Stenberg
Curl_pop3_write() now has a state machine that scans for the end of a POP3 body so that the CR LF '.' CR LF sequence can come in everything from one up to five subsequent packets. Test case 810 is modified to use SLOWDOWN which makes the server pause between each single byte and thus makes the POP3 body get sent to curl basically one byte at a time.
2011-11-28test: added POP3 test with dot-prefixed lineDaniel Stenberg
Test 815 is disabled for now since libcurl currently doesn't unescape such lines the way it should. See mail: http://curl.haxx.se/mail/lib-2011-11/0324.html
2011-11-25test 1211: FTP test to repeat bug #3429299Daniel Stenberg
"Active FTP hangs if server does not open data connection" The server first sends a 150 and then when libcurl waits for the data transfer, the server sends a 425.
2011-11-25FTP tests 1206 - 1209: don't expect QUITDaniel Stenberg
The protocol parts for these tests do not include QUIT simply because the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout error without specificly saying for which connection it concerns, and for timeouts libcurl marks the control channel as "invalid". As this test case times out for the data connection it could still use the control channel.
2011-11-24query-part: ignore the URI part for given protocolsJonas Schnelli
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the protocol will get the "query part" of the URL cut off before the data is handled by the protocol-specific code. This makes libcurl adhere to RFC3986 section 2.2. Test 1220 is added to verify a file:// URL with query-part.
2011-11-20-J -O: use -O name if no Content-Disposition header comes!Daniel Stenberg
A regression between 7.22.0 and 7.23.0 -- downloading a file with the flags -O and -J results in the content being written to stdout if and only if there was no Content-Disposition header in the http response. If there is a C-D header with a filename attribute, the output is correctly written. Reported by: Dave Reisner Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
2011-11-18test: SFTP quote commands with * prefixJonas Schnelli
Related to the f64812ca63 commit
2011-11-18SFTP: support '*' prefix for quote operationsJonas Schnelli
prefixing a command with '*' means it is allowed to fail without aborting the chain actions
2011-11-11Active mode FTP test cases with server not establishing data connectionYang Tse
591 -> FTP multi PORT and 425 on upload 592 -> FTP multi PORT and 421 on upload 593 -> FTP multi PORT upload, no data conn and no transient neg. reply 594 -> FTP multi PORT upload, no data conn and no positive prelim. reply 1206 -> FTP PORT and 425 on download 1207 -> FTP PORT and 421 on download 1208 -> FTP PORT download, no data conn and no transient negative reply 1209 -> FTP PORT download, no data conn and no positive preliminary reply
2011-11-06test 590: verify the bug fix in 4851dafcf1Daniel Stenberg
This test is created to verify Rene Bernhardt's patch which makes sure libcurl properly _not_ deals with Negotiate if not asked to even if the proxy says it can serve it.
2011-10-26test 589: active FTP upload using multi timeout and EPRT disabled serverYang Tse