aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2013-05-02tests: Updated test references to 909 from 1411Steve Holme
...and removed references to libcurl and test1406.
2013-05-02tests: Renamed test1411 to test909 as this is a main SMTP testSteve Holme
2013-04-29tests: Added imap STATUS command testSteve Holme
2013-04-28tests: Corrected the SMTP tests to be RFC2821 compliantSteve Holme
The emails that are sent to the server during these tests were incorrectly formatted as they contained one or more LF terminated lines rather than being CRLF terminated as per Section 2.3.7 of RFC-2821. This wasn't a problem for the test suite as the <stdin> data matched the <upload> data but anyone using these tests as reference would be sending incorrect data to a server.
2013-04-27tests: Corrected command line arguments in test907 and test908Steve Holme
2013-04-27tests: Added SMTP AUTH with initial response testsSteve Holme
2013-04-27tests: Updated SMTP tests to decouple client initial responseSteve Holme
Updated test903 and test904 following the addition of CURLOPT_SASL_IR as the default behaviour of SMTP AUTH responses is now to not include the initial response. New tests with --sasl-ir support to follow.
2013-04-26ftp_state_pasv_resp: connect through proxy also when set by envDaniel Stenberg
When connecting back to an FTP server after having sent PASV/EPSV, libcurl sometimes didn't use the proxy properly even though the proxy was used for the initial connect. The function wrongly checked for the CURLOPT_PROXY variable to be set, which made it act wrongly if the proxy information was set with an environment variable. Added test case 711 to verify (based on 707 which uses --socks5). Also added test712 to verify another variation of setting the proxy: with --proxy socks5:// Bug: http://curl.haxx.se/bug/view.cgi?id=1218 Reported-by: Zekun Ni
2013-04-25test709: clarify the test in the nameDaniel Stenberg
2013-04-22tests: add test1511 to check timecond clean-upAlessandro Ghedini
Verifies the timecond fix in commit c49ed0b6c0f
2013-04-12FTP: handle a 230 welcome responseDaniel Stenberg
...instead of the 220 we otherwise expect. Made the ftpserver.pl support sending a custom "welcome" and then created test 1219 to verify this fix with such a 230 welcome. Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html Reported by: Anders Havn
2013-04-12FTP: access files in root dir correctlyDaniel Stenberg
Accessing a file with an absolute path in the root dir but with no directory specified was not handled correctly. This fix comes with four new test cases that verify it. Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html Reported by: Sam Deane
2013-04-12tests: prevent test206, test1060, and test1061 from failingKamil Dudka
... in case runtests.pl is invoked with non-default -b option Fixes a regression caused by 1e29d275c643ef6aab7948f0f55a7a9397e56b42.
2013-04-11test1218: another cookie tailmatch testDaniel Stenberg
... and make 1216 also verify it with a file input These tests verify commit 3604fde3d3c9b0d, the fix for the "cookie domain tailmatch" vulnerability. See http://curl.haxx.se/docs/adv_20130412.html
2013-04-09test1217: verify parsing 257 responses with "rubbish" before pathDaniel Stenberg
Test 1217 verifies commit e0fb2d86c9f78, and without that change this test fails.
2013-04-09test1216: test tailmatching cookie domainsDaniel Stenberg
This test is an attempt to repeat the problem YAMADA Yasuharu reported at http://curl.haxx.se/mail/lib-2013-04/0108.html
2013-04-08proxy: make ConnectionExists() check credential of proxyconnections tooFabian Keil
Previously it only compared credentials if the requested needle connection wasn't using a proxy. This caused NTLM authentication failures when using proxies as the authentication code wasn't send on the connection where the challenge arrived. Added test 1215 to verify: NTLM server authentication through a proxy (This is a modified copy of test 67)
2013-04-06ftp tests: libcurl returns CURLE_FTP_ACCEPT_FAILED better nowDaniel Stenberg
Since commit 57aeabcc1a20f, it handles errors on the control connection while waiting for the data connection better. Test 591 and 592 are updated accordingly.
2013-04-04easy: Fix the broken CURLOPT_MAXCONNECTS optionLinus Nielsen Feltzing
Copy the CURLOPT_MAXCONNECTS option to CURLMOPT_MAXCONNECTS in curl_easy_perform(). Bug: http://curl.haxx.se/bug/view.cgi?id=1212 Reported-by: Steven Gu
2013-03-27test1509: verify proxy header response headers countDaniel Stenberg
Modified sws to support and use custom CONNECT responses instead of the previously naive hard-coded version. Made the HTTP test server able to extract test case number from the host name in a CONNECT request by finding the number after the last dot. It makes 'machine.moo.123' use test case 123. Adapted a larger amount of tests to the new <connect> style. Bug: http://curl.haxx.se/bug/view.cgi?id=1204 Reported by: Martin Jansen
2013-03-21imap-tests: Added CRLF to reply data to be compliant with RFC-822Steve Holme
Updated the reply data in tests: 800, 801, 802, 804 and 1321 to possess the CRLF as per RFC-822.
2013-03-18tests: specify 'text' mode for some output files in verify sectionYang Tse
2013-03-16tests: 96, 558, 1330: strip build subdirectory dependent leading pathYang Tse
2013-03-15imap-tests: Corrected copy/paste error in test808 reply dataSteve Holme
2013-03-15tests: add #96 #558 and #1330Yang Tse
These verfy that the 'memory tracking' subsystem is actually doing its job when using curl tool (#96), a test in libtest (#558) and also a unit test (#1330), in order to prevent regressions in this functionallity.
2013-03-15imap-tests: Added test808 for custom EXAMINE commandSteve Holme
2013-03-15HTTP proxy: insert slash in URL if missingDaniel Stenberg
curl has been accepting URLs using slightly wrong syntax for a long time, such as when completely missing as slash "http://example.org" or missing a slash when a query part is given "http://example.org?q=foobar". curl would translate these into a legitimate HTTP request to servers, although as was shown in bug #1206 it was not adjusted properly in the cases where a HTTP proxy was used. Test 1213 and 1214 were added to the test suite to verify this fix. The test HTTP server was adjusted to allow us to specify test number in the host name only without using any slashes in a given URL. Bug: http://curl.haxx.se/bug/view.cgi?id=1206 Reported by: ScottJi
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-03-13test509: libcurl initialization with memory callbacks and actual usageYang Tse
2013-03-11test806: Added CRLF to reply data to be compliant with RFC-822Steve Holme
2013-03-11test805: added crlf newlines to make data size matchDaniel Stenberg
since mails sent are supposed to have CRLF line endings I added them and now the data size after (\Seen) matches again properly
2013-03-11test: fix newline for the data check of 807Daniel Stenberg
2013-03-11test801 to test807: fix protocol section line endingsYang Tse
2013-03-10Makefile.am: Corrected a couple of spurious tab charactersSteve Holme
Corrected a couple of tab characters between test702 and test703, and between test900 and test901 which should be spaces.
2013-03-10imap: Added test807 for custom request functionality (STORE)Jiri Hruska
2013-03-10imap: Added test806 for IMAP (folder) LIST commandJiri Hruska
2013-03-10imap: Added test805 for APPEND functionalityJiri Hruska
2013-03-10imap: Added test804 for skipping SELECT if in the same mailboxJiri Hruska
2013-03-10imap: Added test802 and test803 for UIDVALIDITY verificationJiri Hruska
Added one test for a request with matching UIDVALIDITY and one which is a mismatched request that will fail.
2013-03-10imap: Added test801 for UID and SECTION URL parametersJiri Hruska
2013-03-10Makefile.am: Corrected end of line filler characterSteve Holme
The majority of lines, that specify a test file for inclusion, end with a tab character before the slash whilst some end with a space. Corrected those that end with a space to end with a tab character as well.
2013-03-10email-tests: Updated the test data that corresponds to the test numberSteve Holme
Finished segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the IMAP test to be 800Steve Holme
Continued segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the SMTP tests to be in the range 900-906Steve Holme
Continued segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-10email-tests: Renamed the POP3 tests to be in the range 850-857Steve Holme
Started segregating the email protocol tests, into their own protocol based ranges, in preparation of adding more e-mail related tests to the test suite.
2013-03-06imap: Fixed test801 and test1321 to specify a message UIDJiri Hruska
Just a folder list would be retrieved if UID was not specified now.
2013-02-23imap: Added the ability to FETCH a specific UID and SECTIONJiri Hruska
Updated the FETCH command to send the UID and SECTION parsed from the URL. By default the BODY specifier doesn't include a section, BODY[] is now sent whereas BODY[TEXT] was previously sent. In my opinion retrieving just the message text is rarely useful when dealing with emails, as the headers are required for example, so that functionality is not retained. In can however be simulated by adding SECTION=TEXT to the URL. Also updated test801 and test1321 due to the BODY change.
2013-02-11SOCKS: fix socks proxy when noproxy matchedulion
Test 1212 added to verify Bug: http://curl.haxx.se/bug/view.cgi?id=1190
2013-02-10Fix NULL pointer reference when closing an unused multi handle.Linus Nielsen Feltzing
2013-02-09smtp: Fixed an issue when processing EHLO failure responses (Part 3)Steve Holme
Follow up fix to commit 62bd21746443 to cater for servers that don't respond with a 250 in their EHLO responses. Additionally updated the SMTP tests to respond with a 250 response code as per RFC5321.