Age | Commit message (Collapse) | Author |
|
Closes #3752
|
|
Based-on-code-by: Poul T Lomholt
|
|
As previously planned and documented in DEPRECATE.md, all pipelining
code is removed.
Closes #3651
|
|
OAUTHBEARER tokens were incorrectly generated in a format similar to
XOAUTH2 tokens. These changes make OAUTHBEARER tokens conform to the
RFC7628.
Fixes: #2487
Reported-by: Paolo Mossino
Closes https://github.com/curl/curl/pull/3377
|
|
|
|
[ci skip]
|
|
The threaded-shared-conn.c example turned into test case. Only works if
pthread was detected.
An attempt to detect future regressions such as e3a53e3efb942a5
Closes #3687
|
|
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes #1261
Closes #1975
|
|
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes #2431
Closes #3669
|
|
Reproduced bug #3649
Closes #3659
|
|
This reverts commit 3773de378d48b06c09931e44dca4d274d0bfdce0.
Regression shipped in 7.64.0
Fixes #3649
|
|
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
|
|
Test 659 verifies
Also fixed the test 658 name
Closes #3641
|
|
|
|
|
|
|
|
Follow-up to 8eddb8f4259.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes #3621
|
|
|
|
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes #3587
|
|
and make CONNECT_ONLY conections never reuse any existing ones either.
Reported-by: Pavel Löbl
Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html
Closes #3586
|
|
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes #3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
This test doesn't link without FTP support after
fc7ab4835b5fd09d0a6f57000633bb6bb6edfda1, which made Curl_fnmatch
unavailable without FTP support.
Closes https://github.com/curl/curl/pull/3565
|
|
The code is more or less copied from the stdout comparison code, maybe
some better reuse is possible.
test 1457 is adjusted to make the output actually match (by using --silent)
test 506 used <stderr> without actually needing it, so that <stderr> block is removed
Closes #3536
|
|
Option -F generates an intermediate representation of the mime structure
that is used later to create the libcurl mime structure and generate
the --libcurl statements.
Reported-by: Daniel Stenberg
Fixes #3532
Closes #3546
|
|
Since they're used purely for testing purposes, I think they should
rather be stored there.
Closes #3470
|
|
Attempt to reproduce issue #3444.
Closes #3447
|
|
Both user and password are cleared uncondtitionally.
Added unit test 1621 to verify.
Fixes #3423
Closes #3433
|
|
Added test 1562 to verify.
Reported-by: Jeroen Ooms
Fixes #3445
Closes #3450
|
|
[skip ci]
|
|
Closes #3417
|
|
similar to commit f508d29f3902104018
Closes #3443
|
|
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes #3428
Fixes #3371
|
|
NTLM2 did not work i.e. no NTLMv2 response was created. Changing the
check seems to work.
Ref: https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-NLMP/[MS-NLMP].pdf
Fixes https://github.com/curl/curl/issues/3286
Closes https://github.com/curl/curl/pull/3287
Closes https://github.com/curl/curl/pull/3415
|
|
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.com https://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes #3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes #2873
Closes #3383
|
|
Ensure to perform the checks we have to enforce a sane domain in
the cookie request. The check for non-PSL enabled builds is quite
basic but it's better than nothing.
Closes #2964
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes #3350
|
|
This verify that the `?' in the selector is kept as is.
Verifies the fix in #3370
|
|
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes #2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
|
|
... when not actually following the redirect. Otherwise we return error
for this and an application can't extract the value.
Test 1518 added to verify.
Reported-by: Pavel Pavlov
Fixes #3340
Closes #3364
|
|
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
|
|
- Include query in the path passed to generate HTTP auth.
Recent changes to use the URL API internally (46e1640, 7.62.0)
inadvertently broke authentication URIs by omitting the query.
Fixes https://github.com/curl/curl/issues/3353
Closes #3356
|
|
|
|
Because of issue #3315
Closes #3317
|
|
Important for when the file is going to be read again and thus must not
contain old contents!
Adds test 327 to verify.
Reported-by: daboul on github
Fixes #3299
Closes #3300
|
|
The tests 20 and 1322 are using getaddrinfo of libc for resolving. In
eglibc-2.19 there is a memory leakage and invalid free bug which
surfaces in some special circumstances (PF_UNSPEC hint with invalid or
non-existent names). The valgrind runs in testing fail in these
situations.
As the tests 20/1322 are not specific on either protocol (IPv4/IPv6)
this commit changes the hints to IPv4 protocol by passing `--ipv4` flag
on the tests' command line. This prevents the valgrind failures.
|
|
Allows an application to pass in a pre-parsed URL via a URL handle.
Closes #3227
|
|
Closes #3115
|
|
The function identifying a leading "scheme" part of the URL considered a
few letters ending with a colon to be a scheme, making something like
"short:80" to become an unknown scheme instead of a short host name and
a port number.
Extended test 1560 to verify.
Also fixed test203 to use file_pwd to make it get the correct path on
windows. Removed test 2070 since it was a duplicate of 203.
Assisted-by: Marcel Raad
Reported-by: Hagai Auro
Fixes #3220
Fixes #3233
Closes #3223
Closes #3235
|