aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2012-06-21tests: add six Metalink test casesYang Tse
2012-06-21test 2005: add verification of hash checking outcomeYang Tse
2012-06-21tests: Added Metalink test case # 2005Tatsuhiro Tsujikawa
2012-06-11tests: fix test definitions # 1355, 1363, 1385 and 1393Yang Tse
-i without HTTP protocol shall not include headers in the output
2012-06-09Fixes allowing 26 more test cases in 1334 to 1393 range to succeedYang Tse
2012-06-09tests: fix test definitions # 1370 and 1371Yang Tse
-J without -O shall not honor C-D filename
2012-06-07Fixes allowing HTTP test cases 1338, 1339, 1368 and 1369 to succeedYang Tse
2012-06-07tests 1364 to 1393: several -o filename -J -i -D combinations for HTTP and FTPYang Tse
2012-06-07tests 1348 to 1363: test definition polishingYang Tse
Verify that the "Saved to filename 'blabla'" message is only displayed when the 'blabla' filename being used _actually_ has been specified by the server in the Content-Disposition header. Use relative path for unintended file creation postcheck.
2012-06-06Disable non-HTTP header related testsYang Tse
These now detect incompleate header data and fail
2012-06-06tests 1348 to 1363: compleate header data part of test definitionYang Tse
2012-06-05tests 1334 to 1363 revisited.Yang Tse
Add a postcheck section to verify unintended file creation. Remove needless <file> checks in verify section. Renumbering where appropriate.
2012-06-05tests 1348 to 1363: add a comma in test descriptionYang Tse
2012-06-04pop3 tests: CAPA instead of AUTHDaniel Stenberg
After Steve's commit e336bc7c42c7340 test 1319 and 1407 need to check for CAPA instead of AUTH.
2012-06-04tests 1356 to 1363: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1356 to 1362 succeed but a write failure is logged in traceNNNN. Currently 1363 fails, so disabled for now.
2012-06-04tests: Updated pop3 tests for change in auth mechanism detectionSteve Holme
2012-06-04tests 1348 to 1355: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1348 to 1354 succeed but a write failure is logged in traceNNNN. Currently 1355 fails, so disabled for now.
2012-06-04tests 1346 to 1347: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-01tests 1334 to 1345: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-05-30pop3 test server: allow pop3 test server verification to succeed againYang Tse
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further pop3 test server expansion for tests that require CAPA or AUTH support, although this will need some extra work to make it fully functional.
2012-05-27pop3: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the AUTH command. There are two ways of detecting them, either by using the AUTH command, that will return -ERR if not supported or by using the CAPA command which will return SASL and the list of mechanisms if supported, not include SASL if SASL authentication is not supported or -ERR if the CAPA command is not supported. As such it seems simpler to use the AUTH command and fallback to normal clear text authentication if the the command is not supported. Additionally updated the test cases to return -ERR when the AUTH command is encountered. Additional test cases will be added when support for the individual authentication mechanisms is added.
2012-05-25Made -D option work with -O and -J.Tatsuhiro Tsujikawa
To achieve this, first new structure HeaderData is defined to hold necessary data to perform header-related work. Then tool_header_cb now receives HeaderData pointer as userdata. All header-related work (currently, dumping header and Content-Disposition inspection) are done in this callback function. HeaderData.outs->config is used to determine whether each work is done. Unit tests were also updated because after this change, curl code always sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA. Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
2012-04-20HTTP: empty chunked POST ended up in two zero size chunksDaniel Stenberg
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the size of the POST was zero length, it made libcurl first send a zero chunk and then the terminating one. This could confuse a receiver and it should rather just send the terminating chunk as it does with this fix. Test case 1333 is added to verify. Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html Reported by: Arnaud Compan
2012-04-05test: added test 1332 that tests --post303Daniel Stenberg
2012-04-05test1331: cookies on a 407 responseDaniel Stenberg
Verify that cookies are sent back even after a 407 response has been received
2012-04-01HTTP: reset expected DL/UL sizes on redirectsDaniel Stenberg
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the download size was known (like with a Content-Length header), but the subsequent URL (transfered after the 3xx page) was chunked encoded, then the previous "known download size" would linger and cause the progress meter to get incorrect information, ie the former value would remain being sent in. This could easily result in downloads that were WAY larger than "expected" and would cause >100% outputs with the curl command line tool. Test case 599 was created and it was used to repeat the bug and then verify the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3510057 Reported by: Michael Wallner
2012-03-26test #1405: support HTTP disabled buildsYang Tse
2012-03-26test #809: Updated error code to match recent pop3 changesSteve Holme
2012-03-23tests #1316 #1319 #1320 #1321: add missing keywordsYang Tse
2012-03-23test #598: add missing keywordsYang Tse
2012-03-22tests #1400 #1401: add missing keywordsYang Tse
2012-03-22test #598: add to Makefile.amYang Tse
2012-03-18tests 140X: fix --libcurl generated source file reading mode for MSYS buildsYang Tse
2012-02-23test: --libcurl fixesDaniel Stenberg
The line endings broke when I saved the three recent patches (my fault, not Colin's) to 'git am' them. Adjusted the stripping of the test program for comparing to also exclude the SSH key file name as that will differ and use a local path name.
2012-02-23Add tests for curl's --libcurl output.Colin Hogben
These tests check the output of the --libcurl option of curl, including the improved option handling added in a related patch.
2012-02-21pop3 test server: send terminating ".CRLF" onlyDaniel Stenberg
With commit 035ef06bda7 applied, the test pop3 server needs to send ".\r\n" as the body terminating sequence and there needs to be a final CRLF in the actual body in the test data file.
2012-02-10parse_proxy: bail out on zero-length proxy names!Daniel Stenberg
The proxy parser function strips off trailing slashes off the proxy name which could lead to a mistaken zero length proxy name which would be treated as no proxy at all by subsequent functions! This is now detected and an error is returned. Verified by the new test 1329. Reported by: Chandrakant Bagul Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
2012-02-07curl_easy_reset: reset the referer stringDaniel Stenberg
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly clear it. Verified with the new test 598 Bug: http://curl.haxx.se/bug/view.cgi?id=3481551 Reported by: Michael Day
2012-02-06curl tool: don't abort glob-loop due to failuresDaniel Stenberg
We want to continue to the next URL to try even on failures returned from libcurl. This makes -f with ranges still get subsequent URLs even if occasional ones return error. This was a regression as it used to work and broke in the 7.23.0 release. Added test case 1328 to verify the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3481223 Reported by: Juan Barreto
2012-01-24tests: test CRLF in URLsDaniel Stenberg
Related to the security vulnerability: CVE-2012-0036 Bug: http://curl.haxx.se/docs/adv_20120124.html
2012-01-18Add two tests for telnet: URLsColin Hogben
Add simple telnet tests which (ab)use the http server. The second test checks for an input file handling bug.
2012-01-14test: verify HTTP response code 308Daniel Stenberg
This newly speced HTTP status code already works as intended in the new spec: http://greenbytes.de/tech/webdav/draft-reschke-http-status-308-02.html Test 1325 is added to verify that the method is kept after the redirect
2012-01-09FTP: CURLE_PARTIAL_FILE should not cause control connection to be closedgsengun
Test 161 updated accordingly
2012-01-04test1320 test1321: avoid User-Agent comparisonYang Tse
2012-01-03tests: test IMAP, POP3 and SMTP over HTTP proxy tunnelDaniel Stenberg
2012-01-03test proxy supports CONNECTDaniel Stenberg
There's a new 'http-proxy' server for tests that runs on a separate port and lets clients do HTTP CONNECT to other ports on the same host to allow us to test HTTP "tunneling" properly. Test cases now have a <proxy> section in <verify> to check that the proxy protocol part matches correctly. Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316 was added.
2011-12-31changed case: use new host name for subsequent HTTP requestsDaniel Stenberg
When a HTTP connection is re-used for a subsequent request without proxy, it would always re-use the Host: header of the first request. As host names are case insensitive it would make curl send another host name case that what the particular request used. Now it will instead always use the most recent host name to always use the desired casing. Added test case 1318 to verify. Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html Reported by: Alex Vinnik
2011-12-23new test: verify --resolveDaniel Stenberg
Test 1317 verifies --resolve (leaked memory) Bug: http://curl.haxx.se/bug/view.cgi?id=3463121 Reported by: "tw84452852"
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-16curl -F: fix multiple file upload with custom typeDaniel Stenberg
Test case 1315 was added to verify this functionality. When passing in multiple files to a single -F, the parser would get all confused if one of the specified files had a custom type= assigned. Reported by: Colin Hogben