aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2018-11-03infof: clearly indicate truncationDaniel Gustafsson
The internal buffer in infof() is limited to 2048 bytes of payload plus an additional byte for NULL termination. Servers with very long error messages can however cause truncation of the string, which currently isn't very clear, and leads to badly formatted output. This appends a "...\n" (or just "..." in case the format didn't with a newline char) marker to the end of the string to clearly show that it has been truncated. Also include a unittest covering infof() to try and catch any bugs introduced in this quite important function. Closes #3216 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-11-02Curl_follow: accept non-supported schemes for "fake" redirectsDaniel Stenberg
When not actually following the redirect and the target URL is only stored for later retrieval, curl always accepted "non-supported" schemes. This was a regression from 46e164069d1a5230. Reported-by: Brad King Fixes #3210 Closes #3215
2018-10-30test2080: verify the fix for CVE-2018-16842Daniel Stenberg
2018-10-27test1651: unit test Curl_extract_certinfo()Daniel Stenberg
The version used for Gskit, NSS, GnuTLS, WolfSSL and schannel.
2018-10-08FILE: fix CURLOPT_NOBODY and CURLOPT_HEADER outputDaniel Stenberg
Now FILE transfers send headers to the header callback like HTTP and other protocols. Also made curl_easy_getinfo(...CURLINFO_PROTOCOL...) work for FILE in the callbacks. Makes "curl -i file://.." and "curl -I file://.." work like before again. Applied the bold header logic to them too. Regression from c1c2762 (7.61.0) Reported-by: Shaun Jackman Fixes #3083 Closes #3101
2018-10-06test2100: test DoH using IPv4-onlyDaniel Stenberg
To make it only send one DoH request and avoid the race condition that could lead to the requests getting sent in reversed order and thus making it hard to compare in the test case. Fixes #3107 Closes #3108
2018-10-04test320: strip out more HTML when comparingDaniel Stenberg
To make the test case work with different gnutls-serv versions better. Reported-by: Kamil Dudka Fixes #3093 Closes #3094
2018-10-02test1299: use single quotes around asteriskMarcel Raad
Ref: https://github.com/curl/curl/issues/1751#issuecomment-321522580
2018-10-01test1650: make it depend on http/2Daniel Stenberg
Follow-up to 570008c99da0ccbb as it gets link errors. Reported-by: Michael Kaufmann Closes #3068
2018-09-29test2100: require http2 to runDaniel Stenberg
Reported-by: Marcel Raad Fixes #3064 Closes #3065
2018-09-24test320: fix regression in [ci skip]Viktor Szakats
The value in question is coming directly from `gnutls-serv`, so it cannot be modified freely. Reported-by: Marcel Raad Ref: https://github.com/curl/curl/commit/6ae6b2a533e8630afbb21f570305bd4ceece6348#commitcomment-30621004
2018-09-23update URLs in testsViktor Szakats
- and one in docs/MANUAL as well Closes https://github.com/curl/curl/pull/3038
2018-09-23whitespace fixesViktor Szakats
- replace tabs with spaces where possible - remove line ending spaces - remove double/triple newlines at EOF - fix a non-UTF-8 character - cleanup a few indentations/line continuations in manual examples Closes https://github.com/curl/curl/pull/3037
2018-09-22url: use the URL API internally as wellDaniel Stenberg
... to make it a truly unified URL parser. Closes #3017
2018-09-20certs: generate tests certs with sha256 digest algorithmDaniel Stenberg
As OpenSSL 1.1.1 starts to complain and fail on sha1 CAs: "SSL certificate problem: CA signature digest algorithm too weak" Closes #3014
2018-09-19urlapi: add CURLU_GUESS_SCHEME and fix hostname acceptanceDaniel Stenberg
In order for this API to fully work for libcurl itself, it now offers a CURLU_GUESS_SCHEME flag that makes it "guess" scheme based on the host name prefix just like libcurl always did. If there's no known prefix, it will guess "http://". Separately, it relaxes the check of the host name so that IDN host names can be passed in as well. Both these changes are necessary for libcurl itself to use this API. Assisted-by: Daniel Gustafsson Closes #3018
2018-09-13urlglob: improve error messageDaniel Stenberg
to help user understand what the problem is Reported-by: Daniel Shahaf Fixes #2763 Closes #2977
2018-09-12tests/certs: rebuild certs with 2048-bit RSA keysYiming Jing
The previous test certificates contained RSA keys of only 1024 bits. However, RSA claims that 1024-bit RSA keys are likely to become crackable some time before 2010. The NIST recommends at least 2048-bit keys for RSA for now. Better use full 2048 also for testing. Closes #2973
2018-09-10misc: fix typos in commentsDaniel Gustafsson
Closes #2963
2018-09-08test324: fix after 3f3b26d6feb0667714902e836af608094235fca2Marcel Raad
The expected error code is now 60. 51 is dead.
2018-09-08URL-APIDaniel Stenberg
See header file and man pages for API. All documented API details work and are tested in the 1560 test case. Closes #2842
2018-09-07curl_easy_upkeep: removed 'conn' from the nameDaniel Stenberg
... including the associated option. Fixes #2951 Closes #2952
2018-09-07upkeep: add a connection upkeep API: curl_easy_conn_upkeep()Max Dymond
Add functionality so that protocols can do custom keepalive on their connections, when an external API function is called. Add docs for the new options in 7.62.0 Closes #1641
2018-09-06imap: change from "FETCH" to "UID FETCH"Nicklas Avén
... and add "MAILINDEX". As described in #2789, this is a suggested solution. Changing UID=xx to actually get mail with UID xx and add "MAILINDEX" to get a mail with a special index in the mail box (old behavior). So MAILINDEX=1 gives the first non deleted mail in the mail box. Fixes #2789 Closes #2815
2018-09-06DOH: add test case 1650 and 2100Daniel Stenberg
2018-09-06ssl: deprecate CURLE_SSL_CACERT in favour of a unified error codeHan Han
Long live CURLE_PEER_FAILED_VERIFICATION
2018-09-05tests: add unit tests for url.cJim Fuller
Approved-by: Daniel Gustafsson Closes #2937
2018-09-05test1452: mark as flakyDaniel Stenberg
makes it not run in the CI builds Closes #2941
2018-09-05pipelining: deprecatedDaniel Stenberg
Transparently. The related curl_multi_setopt() options all still returns OK when pipelining is selected. To re-enable the support, the single line change in lib/multi.c needs to be reverted. See docs/DEPRECATE.md Closes #2705
2018-09-02test1148: fix precheck outputMarcel Raad
"precheck command error" is not very helpful.
2018-08-31cookies: support creation-time attribute for cookiesDaniel Gustafsson
According to RFC6265 section 5.4, cookies with equal path lengths SHOULD be sorted by creation-time (earlier first). This adds a creation-time record to the cookie struct in order to make cookie sorting more deterministic. The creation-time is defined as the order of the cookies in the jar, the first cookie read fro the jar being the oldest. The creation-time is thus not serialized into the jar. Also remove the strcmp() matching in the sorting as there is no lexicographic ordering in RFC6265. Existing tests are updated to match. Closes #2524
2018-08-31Don't use Windows path %PWD for SSH testsMarcel Raad
All these tests failed on Windows because something like sftp://%HOSTIP:%SSHPORT%PWD/ expanded to sftp://127.0.0.1:1234c:/msys64/home/bla/curl and then curl complained about the port number ending with a letter. Use the original POSIX path instead of the Windows path created in checksystem to fix this. Closes https://github.com/curl/curl/pull/2920
2018-08-24gopher: Do not translate `?' to `%09'Leonardo Taccari
Since GOPHER support was added in curl `?' character was automatically translated to `%09' (`\t'). However, this behaviour does not seems documented in RFC 4266 and for search selectors it is documented to directly use `%09' in the URL. Apart that several gopher servers in the current gopherspace have CGI support where `?' is used as part of the selector and translating it to `%09' often leads to surprising results. Closes #2910
2018-08-23cookie tests: treat files as textMarcel Raad
Fixes test failures because of wrong line endings on Windows.
2018-08-22Tests: fixes for WindowsMarcel Raad
- test 1268 requires unix sockets - test 2072 must be disabled also for MSYS/MinGW
2018-08-21test1148: disable if decimal separator is not pointMarcel Raad
Modifying the locale with environment variables doesn't work for native Windows applications. Just disable the test in this case if the decimal separator is something different than a point. Use a precheck with a small C program to achieve that. Closes https://github.com/curl/curl/pull/2786
2018-08-16test1268: check the stderr output as "text"Daniel Stenberg
Follow-up to 099f37e9c57 Pointed-out-by: Marcel Raad
2018-08-15curl: warn the user if a given file name looks like an optionDaniel Stenberg
... simply because this is usually a sign of the user having omitted the file name and the next option is instead "eaten" by the parser as a file name. Add test1268 to verify Closes #2885
2018-08-14ssh-libssh: fix infinite connect loop on invalid private keyKamil Dudka
Added test 656 (based on test 604) to verify the fix. Bug: https://bugzilla.redhat.com/1595135 Closes #2879
2018-08-13http: fix for tiny "HTTP/0.9" responseDaniel Stenberg
Deal with tiny "HTTP/0.9" (header-less) responses by checking the status-line early, even before a full "HTTP/" is received to allow detecting 0.9 properly. Test 1266 and 1267 added to verify. Fixes #2420 Closes #2872
2018-08-11Split non-portable part off test 1133Marcel Raad
Split off testing file names with double quotes into new test 1158. Disable it for MSYS using a precheck as it doesn't support file names with double quotes (but Cygwin does, for example). Fixes https://github.com/curl/curl/issues/2796 Closes https://github.com/curl/curl/pull/2854
2018-08-11CURLINFO_SIZE_UPLOAD: fix missing counter updateDaniel Stenberg
Adds test 1522 for verification. Reported-by: cjmsoregan Fixes #2847 Closes #2864
2018-08-02test1307: disabledDaniel Stenberg
Turns out that since we're using the native fnmatch function now when available, and they simply disagree on a huge number of test patterns that make it hard to test this function like this... Fixes #2825
2018-07-29test1157: follow-up to 35ecffb9Daniel Stenberg
Ignore the user-agent line. Pointed-out-by: Marcel Raad
2018-07-28test1157: test -H from empty fileDaniel Stenberg
Verifies bugfix #2797
2018-07-22test320: treat curl320.out file as binaryMarcel Raad
Otherwise, LF line endings are converted to CRLF on Windows, but no conversion is done for the reply, so the test case fails. Closes https://github.com/curl/curl/pull/2776
2018-07-21tests: fixes for Windows line endlingsMarcel Raad
Set mode="text" when line endings depend on the system representation. Closes https://github.com/curl/curl/pull/2772
2018-07-21test214: disable MSYS2's POSIX path conversion for URLMarcel Raad
By default, the MSYS2 bash converts all backslashes to forward slashes in URLs. Disable this with MSYS2_ARG_CONV_EXCL for the test to pass. Ref https://github.com/msys2/msys2/wiki/Porting#filesystem-namespaces
2018-07-20test1143: disable MSYS2's POSIX path conversionMarcel Raad
By default, the MSYS2 bash interprets http:/%HOSTIP:%HTTPPORT/want/1143 as a POSIX file list and converts it to a Windows file list. Disable this with MSYS2_ARG_CONV_EXCL for the test to pass. Ref https://github.com/msys2/msys2/wiki/Porting#filesystem-namespaces Closes https://github.com/curl/curl/pull/2765
2018-07-14test1422: add required file featureMarcel Raad
curl configured with --enable-debug --disable-file currently complains on test1422: Info: Protocol "file" not supported or disabled in libcurl Make test1422 dependend on enabled FILE protocol to fix this. Fixes https://github.com/curl/curl/issues/2741 Closes https://github.com/curl/curl/pull/2742