aboutsummaryrefslogtreecommitdiff
path: root/tests/data
AgeCommit message (Collapse)Author
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-16curl -F: fix multiple file upload with custom typeDaniel Stenberg
Test case 1315 was added to verify this functionality. When passing in multiple files to a single -F, the parser would get all confused if one of the specified files had a custom type= assigned. Reported by: Colin Hogben
2011-12-16New test for multiple file uploadColin Hogben
test 1315 checks correct behaviour when uploading multiple files. Buggy behaviour has been seen where only two attachments are sent.
2011-12-07multi interface: fix block when CONNECT_ONLY option is usedGokhan Sengun
2011-12-05FTP: close callback fixDaniel Stenberg
Keep track of which sockets that are the result of accept() calls and refuse to call the closesocket callback for those sockets. Test case 596 now verifies that the open socket callback is called the same number of times as the closed socket callback for active FTP connections. Bug: http://curl.haxx.se/mail/lib-2011-12/0018.html Reported by: Gokhan Sengun
2011-12-05FTP: call opensocket callback properlyDaniel Stenberg
When the new socket is created for an active connection, it is now done using the open socket callback. Test case 596 was modified to run fine, although it hides the fact that the close callback is still called too many times, as it also gets called for closing sockets that were created with accept().
2011-12-04test: verify the opensocket callback for FTPDaniel Stenberg
test 595: for passive FTP test 596: for active FTP
2011-12-01test 815: verify POP3 dot-first-on-line unescapingDaniel Stenberg
2011-11-29POP3: detect when LIST returns no mailsDaniel Stenberg
By making sure the function can detect an "end of body" sequence immediately on the first line, test 811 is now enabled.
2011-11-29POP3: fix end of body detectionDaniel Stenberg
Curl_pop3_write() now has a state machine that scans for the end of a POP3 body so that the CR LF '.' CR LF sequence can come in everything from one up to five subsequent packets. Test case 810 is modified to use SLOWDOWN which makes the server pause between each single byte and thus makes the POP3 body get sent to curl basically one byte at a time.
2011-11-28test: added POP3 test with dot-prefixed lineDaniel Stenberg
Test 815 is disabled for now since libcurl currently doesn't unescape such lines the way it should. See mail: http://curl.haxx.se/mail/lib-2011-11/0324.html
2011-11-25test 1211: FTP test to repeat bug #3429299Daniel Stenberg
"Active FTP hangs if server does not open data connection" The server first sends a 150 and then when libcurl waits for the data transfer, the server sends a 425.
2011-11-25FTP tests 1206 - 1209: don't expect QUITDaniel Stenberg
The protocol parts for these tests do not include QUIT simply because the error is CURLE_OPERATION_TIMEDOUT (28) which is a generic timeout error without specificly saying for which connection it concerns, and for timeouts libcurl marks the control channel as "invalid". As this test case times out for the data connection it could still use the control channel.
2011-11-24query-part: ignore the URI part for given protocolsJonas Schnelli
By setting PROTOPT_NOURLQUERY in the protocol handler struct, the protocol will get the "query part" of the URL cut off before the data is handled by the protocol-specific code. This makes libcurl adhere to RFC3986 section 2.2. Test 1220 is added to verify a file:// URL with query-part.
2011-11-20-J -O: use -O name if no Content-Disposition header comes!Daniel Stenberg
A regression between 7.22.0 and 7.23.0 -- downloading a file with the flags -O and -J results in the content being written to stdout if and only if there was no Content-Disposition header in the http response. If there is a C-D header with a filename attribute, the output is correctly written. Reported by: Dave Reisner Bug: http://curl.haxx.se/mail/archive-2011-11/0030.html
2011-11-18test: SFTP quote commands with * prefixJonas Schnelli
Related to the f64812ca63 commit
2011-11-18SFTP: support '*' prefix for quote operationsJonas Schnelli
prefixing a command with '*' means it is allowed to fail without aborting the chain actions
2011-11-11Active mode FTP test cases with server not establishing data connectionYang Tse
591 -> FTP multi PORT and 425 on upload 592 -> FTP multi PORT and 421 on upload 593 -> FTP multi PORT upload, no data conn and no transient neg. reply 594 -> FTP multi PORT upload, no data conn and no positive prelim. reply 1206 -> FTP PORT and 425 on download 1207 -> FTP PORT and 421 on download 1208 -> FTP PORT download, no data conn and no transient negative reply 1209 -> FTP PORT download, no data conn and no positive preliminary reply
2011-11-06test 590: verify the bug fix in 4851dafcf1Daniel Stenberg
This test is created to verify Rene Bernhardt's patch which makes sure libcurl properly _not_ deals with Negotiate if not asked to even if the proxy says it can serve it.
2011-10-26test 589: active FTP upload using multi timeout and EPRT disabled serverYang Tse
2011-10-24dist: add test 587Daniel Stenberg
I created test 587 in commit 840eff44f2b but forgot to add the file to the tarball. Added now.
2011-10-24test 588: verify active FTP with multi interface without EPRTDaniel Stenberg
This is using the verbatim 525 test code but it disables EPRT in the server and this should work just as well anyway.
2011-10-24FTP server: allow EPRT by defaultDaniel Stenberg
EPRT is now supported by default by the server. To disable it, use the generic REPLY instruction in the <servercmd> tag. Test 116 now has it disabled. All other existing active FTP port tests strip out the port commands from the logs already so the change of the server isn't that noticable.
2011-10-24large headers: have curl accept >16K headersDaniel Stenberg
As commit 5850cc4808ab clarifies, libcurl can deliver header lines that are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that size. The curl tool has check (when built debug-enabled) that made the wrong checks and this new test 1205 verifies that larger headers work.
2011-10-21Added some missing test case XML tags and keywordsDan Fandrich
2011-10-21multi tests: OOM handling fixesYang Tse
Additionally, improved error checking and logging.
2011-10-20Curl_http_input_auth: handle multiple auths in WWW-AuthenticateDaniel Stenberg
The fix is pretty much the one Nick Zitzmann provided, just edited to do the right indent levels and with test case 1204 added to verify the fix. Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html Reported by: Nick Zitzmann
2011-10-16formdata: ack read callback abortDaniel Stenberg
When doing a multipart formpost with a read callback, and that callback returns CURL_READFUNC_ABORT, that return code must be properly propagated back and handled accordingly. Previously it would be handled as a zero byte read which would cause a hang! Added test case 587 to verify. It uses the lib554.c source code with a small ifdef. Reported by: Anton Bychkov Bug: http://curl.haxx.se/mail/lib-2011-10/0097.html
2011-10-06test harness: non-stunnel https server integration overhaulYang Tse
2011-09-21test 814: smtp without --mail-fromDaniel Stenberg
Verifies the fix from commit 322f3d5af7093
2011-09-20Curl_follow: handle redirects to "//hostname/path"Daniel Stenberg
2011-09-13Curl_add_custom_headers: support headers with no datawarp kawada
A custom HTTP header ending in a semicolon instead of a colon will be treated as a header to be added without any data portion.
2011-09-06test case 583: ensure that test failures don't go unnoticedYang Tse
2011-09-05test suite: use test case specific netrc file namesYang Tse
2011-08-27NTLM_WB: final congruency naming adjustmentsYang Tse
Configure script option --enable-wb-ntlm-auth renamed to --enable-ntlm-wb Configure script option --disable-wb-ntlm-auth renamed to --disable-ntlm-wb Preprocessor symbol WINBIND_NTLM_AUTH_ENABLED renamed to NTLM_WB_ENABLED Preprocessor symbol WINBIND_NTLM_AUTH_FILE renamed to NTLM_WB_FILE Test harness env var CURL_NTLM_AUTH renamed to CURL_NTLM_WB_FILE Static function wb_ntlm_close renamed to ntlm_wb_cleanup Static function wb_ntlm_initiate renamed to ntlm_wb_init Static function wb_ntlm_response renamed to ntlm_wb_response
2011-08-27NTLM single-sign on adjustments (XI)Yang Tse
Feature string literal NTLM_SSO renamed to NTLM_WB. Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED. curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'. Fix some comments to make clear that this is actually a NTLM delegation.
2011-08-19test573: fix the keywordsDaniel Stenberg
2011-08-15test572: fixedDaniel Stenberg
Two problems were fixed: GET_PARAMETER responses that have no body must be 204 response or properly set length to 0. One of the <data> sections had the wrong content-length for its GET_PARAMETER response. Enabled test 572 again.
2011-08-15tests: disable #572Yang Tse
2011-08-09cookie parser: handle 'secure='Daniel Stenberg
There are two keywords in cookie headers that don't follow the regular name=value style: secure and httponly. Still we must support that they are written like 'secure=' and then treat them as if they were written 'secure'. Test case 31 was much extended by Rob Ward to test this. Bug: http://curl.haxx.se/bug/view.cgi?id=3349227 Reported by: "gnombat"
2011-08-08CURLFORM_BUFFER: insert filename as documentedDaniel Stenberg
A regression where CURLFORM_BUFFER stopped to properly insert the file name part in the formpart. Bug introduced in commit f851f768578dc096. Added CURLFORM_BUFFER use to test 554 to verify this. Bug: http://curl.haxx.se/mail/lib-2011-07/0176.html Reported by: Henry Ludemann
2011-08-05test710: verify that --proxy socks5://hostname worksDaniel Stenberg
2011-08-05test709: HTTP GET via SOCKS5 set in environmentDaniel Stenberg
2011-08-04test1313: test content-disposition with uneven quotesDaniel Stenberg
2011-08-04-J: support ';' in quoted file namesDaniel Stenberg
Content-disposition headers can provide file names with semicolons which previously would be cut off at that point. Added test case 1311 and 1312 to verify -J. Bug: http://curl.haxx.se/bug/view.cgi?id=3375603 Reported by: Peter Hjalmarsson
2011-07-31NTLM single-sign on adjustments (VIII)Yang Tse
Use preprocessor symbols WINBIND_NTLM_AUTH_ENABLED and WINBIND_NTLM_AUTH_FILE for Samba's winbind daemon ntlm_auth helper code implementation and filename. Retain preprocessor symbol USE_NTLM_SSO for NTLM single-sign-on feature availability implementation independent. For test harness, prefix NTLM_AUTH environment vars with CURL_ Refactor and rename configure option --with-ntlm-auth to --enable-wb-ntlm-auth[=FILE]
2011-07-29Renumbered test2005 to test1310Dan Fandrich
The 20xx range is for multiple sequential tests.
2011-07-27NTLM single-sign on adjustments (I)Yang Tse
Use fake_ntlm absolute filename in NTLM_AUTH environment variable for test 2005 definition.
2011-07-26Fixed test 2005 to work in out-of-tree buildsDan Fandrich
Also, set the test number in the test data file so fake_ntlm can be reused in future tests.
2011-07-20http error response: stop sending when error is receivedDaniel Stenberg
When libcurl has said to the server that there's a POST or PUT coming (with a content-length and all) it has to either deliver that amount of data or it needs to close the connection before trying a second request. Adds test case 1129, 1130 and 1131 The bug report is about when used with 100-continue, but the change is more generic. Bug: http://curl.haxx.se/mail/lib-2011-06/0191.html Reported by: Steven Parkes
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 11:10:06 +0000