aboutsummaryrefslogtreecommitdiff
path: root/tests/libtest/Makefile.inc
AgeCommit message (Collapse)Author
2017-06-02test1538: verify the libcurl strerror API callsDaniel Stenberg
2017-06-02test1537: dedicated tests of the URL (un)escape API callsDaniel Stenberg
Closes #1530
2017-05-04test559: verify use of minimum CURLOPT_BUFFERSIZEDaniel Stenberg
2017-04-03include: curl/system.h is a run-time version of curlbuild.hDaniel Stenberg
system.h is aimed to replace curlbuild.h at a later point in time when we feel confident system.h works sufficiently well. curl/system.h is currently used in parallel with curl/curlbuild.h curl/system.h determines a data sizes, data types and include file status based on available preprocessor defines instead of getting generated at build-time. This, in order to avoid relying on a build-time generated file that makes it complicated to do 32 and 64 bit bields from the same installed set of headers. Test 1541 verifies that system.h comes to the same conclusion that curlbuild.h offers. Closes #1373
2017-03-28pause: handle mixed types of data when pausedDaniel Stenberg
When receiving chunked encoded data with trailers, and the write callback returns PAUSE, there might be both body and header to store to resend on unpause. Previously libcurl returned error for that case. Added test case 1540 to verify. Reported-by: Stephen Toub Fixes #1354 Closes #1357
2016-11-26tests: Add some testcases for recent new features.Frank Gevaerts
Add missing tests for CURLINFO_SCHEME, CURLINFO_PROTOCOL, %{scheme}, and %{http_version} closes #1143
2016-11-05easy: Initialize info variables on easy init and duphandleJay Satiro
- Call Curl_initinfo on init and duphandle. Prior to this change the statistical and informational variables were simply zeroed by calloc on easy init and duphandle. While zero is the correct default value for almost all info variables, there is one where it isn't (filetime initializes to -1). Bug: https://github.com/curl/curl/issues/1103 Reported-by: Neal Poole
2016-09-22New libcurl option to keep sending on errorMichael Kaufmann
Add the new option CURLOPT_KEEP_SENDING_ON_ERROR to control whether sending the request body shall be completed when the server responds early with an error status code. This is suitable for manual NTLM authentication. Reviewed-by: Jay Satiro Closes https://github.com/curl/curl/pull/904
2016-09-20easy: Reset all statistical session info in curl_easy_resetJay Satiro
Bug: https://github.com/curl/curl/issues/1017 Reported-by: Jeroen Ooms
2016-04-20tests: added test1517Karlson2k
... for checking ability to receive full HTTP response when POST request is used with slow read callback function. This test checks for bug #657 and verifies the work-around from 72d5e144fbc6. Closes #720
2015-06-23test1531: verify POSTFIELDSIZE set after add_handleDaniel Stenberg
Following the fix made in 903b6e05565bf.
2015-06-09CURLOPT_OPENSOCKETFUNCTION: return error at onceDaniel Stenberg
When CURL_SOCKET_BAD is returned in the callback, it should be treated as an error (CURLE_COULDNT_CONNECT) if no other socket is subsequently created when trying to connect to a server. Bug: http://curl.haxx.se/mail/lib-2015-06/0047.html
2015-01-07tests: make sure CRLFs can't be used in URLs passed to proxyDaniel Stenberg
Bug: http://curl.haxx.se/docs/adv_20150108B.html
2014-12-28test556: Fixed compilation warningSteve Holme
lib556.c:90: warning: conversion to 'unsigned int' from 'size_t' may alter its value
2014-12-28tests: Added test for bug #1456Steve Holme
2014-07-24libtest: fixed duplicated line in MakefileSergey Nikulov
Bug: https://github.com/bagder/curl/pull/105
2014-04-04PROXYHEADER: send these headers in "normal" proxy requests tooDaniel Stenberg
Updated the docs to clarify and the code accordingly, with test 1528 to verify: When CURLHEADER_SEPARATE is set and libcurl is asked to send a request to a proxy but it isn't CONNECT, then _both_ header lists (CURLOPT_HTTPHEADER and CURLOPT_PROXYHEADER) will be used since the single request is then made for both the proxy and the server.
2014-04-04CURLOPT_PROXYHEADER: set headers for proxy-onlyDaniel Stenberg
Includes docs and new test cases: 1525, 1526 and 1527 Co-written-by: Vijay Panghal
2014-02-06tests: add test for bug #1303 (dns cache timeout)Romulo A. Ceccon
Test-case 1515 reproduces bug #1303, where libcurl would incorrectly prune DNS entries added via CURLOPT_RESOLVE after the DNS_CACHE_TIMEOUT had expired.
2014-01-20test1514: added - no more negative Content-Length (HTTP POST)Cédric Deltheil
This covers changes from commit afd288b2.
2014-01-03test1513: added - verify early progress callback return failDaniel Stenberg
Verify the change brought in commit 8e11731653061. It makes sure that returning a failure from the progress callback even very early results in the correct return code.
2013-08-08global dns cache: didn't work [regression]Daniel Stenberg
CURLOPT_DNS_USE_GLOBAL_CACHE broke in commit c43127414d89ccb (been broken since the libcurl 7.29.0 release). While this option has been documented as deprecated for almost a decade and nobody even reported this bug, it should remain functional. Added test case 1512 to verify
2013-04-22tests: add test1511 to check timecond clean-upAlessandro Ghedini
Verifies the timecond fix in commit c49ed0b6c0f
2013-04-15Add extra libs for lib1900 and lib2033 test programsPaul Howarth
These are needed in cases where clock_gettime is used, from librt.
2013-04-04easy: Fix the broken CURLOPT_MAXCONNECTS optionLinus Nielsen Feltzing
Copy the CURLOPT_MAXCONNECTS option to CURLMOPT_MAXCONNECTS in curl_easy_perform(). Bug: http://curl.haxx.se/bug/view.cgi?id=1212 Reported-by: Steven Gu
2013-03-27test1509: verify proxy header response headers countDaniel Stenberg
Modified sws to support and use custom CONNECT responses instead of the previously naive hard-coded version. Made the HTTP test server able to extract test case number from the host name in a CONNECT request by finding the number after the last dot. It makes 'machine.moo.123' use test case 123. Adapted a larger amount of tests to the new <connect> style. Bug: http://curl.haxx.se/bug/view.cgi?id=1204 Reported by: Martin Jansen
2013-03-15tests: add #96 #558 and #1330Yang Tse
These verfy that the 'memory tracking' subsystem is actually doing its job when using curl tool (#96), a test in libtest (#558) and also a unit test (#1330), in order to prevent regressions in this functionallity.
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-03-13test509: libcurl initialization with memory callbacks and actual usageYang Tse
2013-02-10Fix NULL pointer reference when closing an unused multi handle.Linus Nielsen Feltzing
2013-02-08DONE: consider callback-aborted transfers prematureDaniel Stenberg
This bug report properly identified that when doing SMTP and aborting the transfer with a callback, it must be considered aborted prematurely by the code to avoid QUIT etc to be attempted as that would cause a hang. The new test case 1507 verifies this behavior. Reported by: Patricia Muscalu Bug: http://curl.haxx.se/bug/view.cgi?id=1184
2013-02-05CURLMOPT_MAXCONNECTS: restore functionalityLinus Nielsen Feltzing
When a connection is no longer used, it is kept in the cache. If the cache is full, the oldest idle connection is closed. If no connection is idle, the current one is closed instead.
2013-01-20Makefile.inc: fix $(top_srcdir) not allowed in _SOURCES variablesYang Tse
2013-01-15build: use per-target '_CPPFLAGS' for those currently using defaultYang Tse
Automake documents that doing this will make it choose a different name for intermediate object files even when sharing source files across targets of same Makefile.am. Up to automake 1.13.1 target's intermediate object files were placed in the build subdirectory of the target. We depended on this, probably undocumented behavior, to achieve same behavior as if a per-target flag had been specified when building targets that actually belong to different Makefile.am files. It seems automake 1.13.2 is going to break behavior mentioned above. So, lets use a documented behavior in order to achieve same purpose, across automake versions, no matter where automake wishes to place intermediate object files. Our build targets that already were using a per-target '_CFLAGS' or '_CPPFLAGS' need no 'fixing', these were already 'fixed'. The only Makefile.am or Makefile.in files in libcurl's source tree touched by this 'fix' are tests/libtest/Makefile.inc and tests/unit/Makefile.inc.
2013-01-15tests/libtest/Makefile.inc: sort build targetsYang Tse
2013-01-06Revert changes relative to lib/*.[ch] recent renamingYang Tse
This reverts renaming and usage of lib/*.h header files done 28-12-2012, reverting 2 commits: f871de0... build: make use of 76 lib/*.h renamed files ffd8e12... build: rename 76 lib/*.h files This also reverts removal of redundant include guard (redundant thanks to changes in above commits) done 2-12-2013, reverting 1 commit: c087374... curl_setup.h: remove redundant include guard This also reverts renaming and usage of lib/*.c source files done 3-12-2013, reverting 3 commits: 13606bb... build: make use of 93 lib/*.c renamed files 5b6e792... build: rename 93 lib/*.c files 7d83dff... build: commit 13606bbfde follow-up 1 Start of related discussion thread: http://curl.haxx.se/mail/lib-2013-01/0012.html Asking for confirmation on pushing this revertion commit: http://curl.haxx.se/mail/lib-2013-01/0048.html Confirmation summary: http://curl.haxx.se/mail/lib-2013-01/0079.html NOTICE: The list of 2 files that have been modified by other intermixed commits, while renamed, and also by at least one of the 6 commits this one reverts follows below. These 2 files will exhibit a hole in history unless git's '--follow' option is used when viewing logs. lib/curl_imap.h lib/curl_smtp.h
2013-01-03build: make use of 93 lib/*.c renamed filesYang Tse
93 *.c source files renamed to use our standard naming scheme. This change affects 77 files in libcurl's source tree.
2012-12-28build: make use of 76 lib/*.h renamed filesYang Tse
76 private header files renamed to use our standard naming scheme. This change affects 322 files in libcurl's source tree.
2012-12-25test 1504 and 1505: same as 1502 but with different cleanup sequencesYang Tse
2012-12-23test 1503: same as 1502 but with a different cleanup sequenceYang Tse
2012-12-23test 1502: OOM handling fixesYang Tse
2012-12-05libtest: fix some compiler warningsYang Tse
2012-11-30build: prevent global LIBS from influencing libtest build targetsYang Tse
2012-11-28build: avoid linkage of directly unused librariesYang Tse
2012-11-18fixed memory leak: CURLOPT_RESOLVE with multi interfaceDaniel Stenberg
DNS cache entries populated with CURLOPT_RESOLVE were not properly freed again when done using the multi interface. Test case 1502 added to verify. Bug: http://curl.haxx.se/bug/view.cgi?id=3575448 Reported by: Alex Gruz
2012-11-08Fix compilation of lib1501Fabian Keil
2012-11-04FTP: prevent the multi interface from blockingDaniel Stenberg
As pointed out in Bug report #3579064, curl_multi_perform() would wrongly use a blocking mechanism internally for some commands which could lead to for example a very long block if the LIST response never showed. The solution was to make sure to properly continue to use the multi interface non-blocking state machine. The new test 1501 verifies the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3579064 Reported by: Guido Berhoerster
2012-09-01Unit test for curl_multi_wait()Sara Golemon
2012-08-31NTLM: verify multiple connections workJoe Mason
Add test2032 to test that NTLM does not switch connections in the middle of the handshake
2012-08-03Add tests of auth retriesJoe Mason