aboutsummaryrefslogtreecommitdiff
path: root/tests/libtest
AgeCommit message (Collapse)Author
2020-03-02mime: fix the binary encoder to handle large data properlyPatrick Monnerat
New test 666 checks this is effective. As upload buffer size is significant in this kind of tests, shorten it in similar test 652. Fixes #4860 Reported-by: RuurdBeerstra on github
2020-03-02mime: do not perform more than one read in a rowPatrick Monnerat
Input buffer filling may delay the data sending if data reads are slow. To overcome this problem, file and callback data reads do not accumulate in buffer anymore. All other data (memory data and mime framing) are considered as fast and still concatenated in buffer. As this may highly impact performance in terms of data overhead, an early end of part data check is added to spare a read call. When encoding a part's data, an encoder may require more bytes than made available by a single read. In this case, the above rule does not apply and reads are performed until the encoder is able to deliver some data. Tests 643, 644, 645, 650 and 654 have been adapted to the output data changes, with test data size reduced to avoid the boredom of long lists of 1-byte chunks in verification data. New test 664 checks mimepost using single-byte read callback with encoder. New test 665 checks the end of part data early detection. Fixes #4826 Reported-by: MrdUkk on github
2020-03-02mime: latch last read callback status.Patrick Monnerat
In case a read callback returns a status (pause, abort, eof, error) instead of a byte count, drain the bytes read so far but remember this status for further processing. Takes care of not losing data when pausing, and properly resume a paused mime structure when requested. New tests 670-673 check unpausing cases, with easy or multi interface and mime or form api. Fixes #4813 Reported-by: MrdUkk on github Closes #4833
2020-02-09altsvc: keep a copy of the file name to survive handle resetDaniel Stenberg
The alt-svc cache survives a call to curl_easy_reset fine, but the file name to use for saving the cache was cleared. Now the alt-svc cache has a copy of the file name to survive handle resets. Added test 1908 to verify. Reported-by: Craig Andrews Fixes #4898 Closes #4902
2020-01-28urlapi: guess scheme correct even with credentials givenDaniel Stenberg
In the "scheme-less" parsing case, we need to strip off credentials first before we guess scheme based on the host name! Assisted-by: Jay Satiro Fixes #4856 Closes #4857
2020-01-09libtest/mk-lib1521: adapt to new public header layoutDaniel Stenberg
2019-12-16tests: make sure checksrc runs on header files tooDaniel Stenberg
2019-12-15lib1591: free memory properly on OOM, in the trailers callbackDaniel Stenberg
Detected by torture tests. Closes #4720
2019-12-13lib1559: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13lib1557: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-01build: Disable Visual Studio warning "conditional expression is constant"Jay Satiro
- Disable warning C4127 "conditional expression is constant" globally in curl_setup.h for when building with Microsoft's compiler. This mainly affects building with the Visual Studio project files found in the projects dir. Prior to this change the cmake and winbuild build systems already disabled 4127 globally for when building with Microsoft's compiler. Also, 4127 was already disabled for all build systems in the limited circumstance of the WHILE_FALSE macro which disabled the warning specifically for while(0). This commit removes the WHILE_FALSE macro and all other cruft in favor of disabling globally in curl_setup. Background: We have various macros that cause 0 or 1 to be evaluated, which would cause warning C4127 in Visual Studio. For example this causes it: #define Curl_resolver_asynch() 1 Full behavior is not clearly defined and inconsistent across versions. However it is documented that since VS 2015 Update 3 Microsoft has addressed this somewhat but not entirely, not warning on while(true) for example. Prior to this change some C4127 warnings occurred when I built with Visual Studio using the generated projects in the projects dir. Closes https://github.com/curl/curl/pull/4658
2019-11-25multi: add curl_multi_wakeup()Gergely Nagy
This commit adds curl_multi_wakeup() which was previously in the TODO list under the curl_multi_unblock name. On some platforms and with some configurations this feature might not be available or can fail, in these cases a new error code (CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup(). Fixes #4418 Closes #4608
2019-11-02copyrights: update all copyright notices to 2019 on files changed this yearVilhelm Prytz
Closes #4547
2019-10-16url: normalize CURLINFO_EFFECTIVE_URLDaniel Stenberg
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as input in most cases, which made it not get a scheme prefixed like before if the URL was given without one, and it didn't remove dotdot sequences etc. Added test case 1907 to verify that this now works as intended and as before 7.62.0. Regression introduced in 7.62.0 Reported-by: Christophe Dervieux Fixes #4491 Closes #4493
2019-09-28cookies: using a share with cookies shouldn't enable the cookie engineDaniel Stenberg
The 'share object' only sets the storage area for cookies. The "cookie engine" still needs to be enabled or activated using the normal cookie options. This caused the curl command line tool to accidentally use cookies without having been told to, since curl switched to using shared cookies in 7.66.0. Test 1166 verifies Updated test 506 Fixes #4429 Closes #4434
2019-09-27FTP: add test for FTPFILE_NOCWD: Avoid redundant CWDsZenju
Add libtest 661 Closes #4417
2019-09-24urlapi: question mark within fragment is still fragmentDaniel Stenberg
The parser would check for a query part before fragment, which caused it to do wrong when the fragment contains a question mark. Extended test 1560 to verify. Reported-by: Alex Konev Fixes #4412 Closes #4413
2019-09-19urlapi: CURLU_NO_AUTHORITY allows empty authority/host partJens Finkhaeuser
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not "file:///") to override cURL's default demand that an authority exists. Closes #4349
2019-09-10urlapi: verify the IPv6 numerical addressDaniel Stenberg
It needs to parse correctly. Otherwise it could be tricked into letting through a-f using host names that libcurl would then resolve. Like '[ab.be]'. Reported-by: Thomas Vegas Closes #4315
2019-08-08cleanup: s/curl_debug/curl_dbg_debug in comments and docsDaniel Stenberg
Leftovers from the function rename back in 76b63489495 Reported-by: Gisle Vanem Bug: https://github.com/curl/curl/commit/f3e0f071b14fcb46a453f69bdf4e062bcaacf362#com mitcomment-34601751 Closes #4203
2019-08-07CURLINFO_RETRY_AFTER: parse the Retry-After header valueDaniel Stenberg
This is only the libcurl part that provides the information. There's no user of the parsed value. This change includes three new tests for the parser. Ref: #3794
2019-07-14http: allow overriding timecond with custom headerPeter Simonyi
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g. If-Modified-Since). Allow this to be replaced or suppressed with CURLOPT_HTTPHEADER. Fixes #4103 Closes #4109
2019-06-25test1521: adapt to SLISTPOINTDaniel Stenberg
The header now has the slist-using options marked as SLISTPOINT so this makes sure test 1521 understands that. Follow-up to ae99b4de1c443ae989 Closes #4074
2019-06-18test1523: basic test of CURLOPT_LOW_SPEED_LIMITDaniel Stenberg
2019-06-05build: fix Codacy warningsMarcel Raad
Reduce variable scopes and remove redundant variable stores. Closes https://github.com/curl/curl/pull/3975
2019-05-20lib1560: add tests for parsing URL with too long schemeDaniel Stenberg
Ref: #3905
2019-05-14urlapi: require a non-zero host name length when parsing URLDaniel Stenberg
Updated test 1560 to verify. Closes #3880
2019-05-12build: fix "clarify calculation precedence" warningsMarcel Raad
Codacy/CppCheck warns about this. Consistently use parentheses as we already do in some places to silence the warning. Closes https://github.com/curl/curl/pull/3866
2019-05-05urlapi: add CURLUPART_ZONEID to set and getDaniel Stenberg
The zoneid can be used with IPv6 numerical addresses. Updated test 1560 to verify. Closes #3834
2019-05-03urlapi: strip off scope id from numerical IPv6 addressesDaniel Stenberg
... to make the host name "usable". Store the scope id and put it back when extracting a URL out of it. Also makes curl_url_set() syntax check CURLUPART_HOST. Fixes #3817 Closes #3822
2019-04-29CURL_MAX_INPUT_LENGTH: largest acceptable string input sizeDaniel Stenberg
This limits all accepted input strings passed to libcurl to be less than CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls: curl_easy_setopt() and curl_url_set(). The 8000000 number is arbitrary picked and is meant to detect mistakes or abuse, not to limit actual practical use cases. By limiting the acceptable string lengths we also reduce the risk of integer overflows all over. NOTE: This does not apply to `CURLOPT_POSTFIELDS`. Test 1559 verifies. Closes #3805
2019-04-15tests: Run global cleanup at end of testsDaniel Gustafsson
Make sure to run curl_global_cleanup() when shutting down the test suite to release any resources allocated in the SSL setup. This is clearly visible when running tests with PolarSSL where the thread lock calloc() memory which isn't released when not running cleanup. Below is an excerpt from the autobuild logs: ==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2 ==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752) ==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205) ==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup (polarssl_threadlock.c:54) ==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865) ==12368== by 0x14129D: Curl_ssl_init (vtls.c:171) ==12368== by 0x118B4C: global_init (easy.c:158) ==12368== by 0x118BF5: curl_global_init (easy.c:221) ==12368== by 0x118D0B: curl_easy_init (easy.c:299) ==12368== by 0x114E96: test (lib1906.c:32) ==12368== by 0x115495: main (first.c:174) Closes #3783 Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-04-13urlapi: stricter CURLUPART_PORT parsingDaniel Stenberg
Only allow well formed decimal numbers in the input. Document that the number MUST be between 1 and 65535. Add tests to test 1560 to verify the above. Ref: https://github.com/curl/curl/issues/3753 Closes #3762
2019-04-11test1906: verify CURLOPT_CURLU + CURLOPT_PORT usageDaniel Stenberg
Based-on-code-by: Poul T Lomholt
2019-04-11build: fix Codacy/CppCheck warningsMarcel Raad
- remove unused variables - declare conditionally used variables conditionally - suppress unused variable warnings in the CMake tests - remove dead variable stores - consistently use WIN32 macro to detect Windows Closes https://github.com/curl/curl/pull/3739
2019-04-11lib557: initialize variablesMarcel Raad
These variables are only conditionally initialized. Closes https://github.com/curl/curl/pull/3739
2019-04-11lib509: add missing include for strdupMarcel Raad
Closes https://github.com/curl/curl/pull/3739
2019-04-07test: urlapi: urlencode characters above 0x7f correctlyJakub Zakrzewski
2019-04-06pipelining: removedDaniel Stenberg
As previously planned and documented in DEPRECATE.md, all pipelining code is removed. Closes #3651
2019-03-18test1541: threaded connection sharingDaniel Stenberg
The threaded-shared-conn.c example turned into test case. Only works if pthread was detected. An attempt to detect future regressions such as e3a53e3efb942a5 Closes #3687
2019-03-14makefile: make checksrc and hugefile commands "silent"Daniel Stenberg
... to match the style already used for compiling, linking etc. Acknowledges 'make V=1' to enable verbose. Closes #3681
2019-03-08memdebug: make debug-specific functions use curl_dbg_ prefixDaniel Stenberg
To not "collide" or use up the regular curl_ name space. Also makes them easier to detect in helper scripts. Closes #3656
2019-03-05tests: fix multiple may be used uninitialized warningsDaniel Stenberg
2019-03-04CURLU: fix NULL dereference when used over proxyDaniel Stenberg
Test 659 verifies Also fixed the test 658 name Closes #3641
2019-02-27cookies: only save the cookie file if the engine is enabledDaniel Stenberg
Follow-up to 8eddb8f4259. If the cookieinfo pointer is NULL there really is nothing to save. Without this fix, we got a problem when a handle was using shared object with cookies and is told to "FLUSH" it to file (which worked) and then the share object was removed and when the easy handle was closed just afterwards it has no cookieinfo and no cookies so it decided to save an empty jar (overwriting the file just flushed). Test 1905 now verifies that this works. Assisted-by: Michael Wallner Assisted-by: Marcel Raad Closes #3621
2019-02-19connection: never reuse CONNECT_ONLY conectionsDaniel Stenberg
and make CONNECT_ONLY conections never reuse any existing ones either. Reported-by: Pavel Löbl Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html Closes #3586
2019-02-14gssapi: fix deprecated header warningsDaniel Stenberg
Heimdal includes on FreeBSD spewed out lots of them. Less so now. Closes #3566
2019-01-10test1558: verify CURLINFO_PROTOCOL on file:// transferDaniel Stenberg
Attempt to reproduce issue #3444. Closes #3447
2019-01-07curl_multi_remove_handle() don't block terminating c-ares requestsBrad Spencer
Added Curl_resolver_kill() for all three resolver modes, which only blocks when necessary, along with test 1592 to confirm curl_multi_remove_handle() doesn't block unless it must. Closes #3428 Fixes #3371
2019-01-04printf: fix format specifiersRikard Falkeborn
Closes #3426
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:34:33 +0000