aboutsummaryrefslogtreecommitdiff
path: root/tests/runtests.pl
AgeCommit message (Collapse)Author
2014-11-28runtests.pl: fix startup of IPv6 serversPeter Wu
Commit curl-7_23_1-143-g8218064 changed the parameter of responsive_http_server to accept types other than IPv6 (converting from a boolean to a string), but only considered the lower-case "ipv6" and not the "IPv6" variant. This caused all servers to start in IPv4 mode instead. This patch converts the remaining cases to "ipv6". While not strictly necessary for the run*server variants, these got also converted for consistency and to prevent future errors. Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-28runtests.pl: fix warning message, remove duplicate valuePeter Wu
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-22runtests.pl: Re-aligned feature support commentsSteve Holme
2014-11-22runtests.pl: Use Kerberos and SPNEGO as proxies for the crypto featureSteve Holme
In addition to NTLM, use Kerberos and SPNEGO as proxies to the crypto feature. ...and converted tab characters, from commit 4b4e8a5853, to spaces.
2014-11-22runtests.pl: Added support for SPNEGOSteve Holme
2014-11-22runtests.pl: Added Kerberos detectionSteve Holme
2014-11-22runtests.pl: Added GSS-API detectionSteve Holme
2014-11-20test1800: first plain-text http2 test caseDaniel Stenberg
Verifies the upgrade request, but gets a plain 1.1 response
2014-11-04tests: add new feature 'SSLpinning'Daniel Stenberg
... and make test 2034 and 2035 require it, and have it set when built with OpenSSL or GnuTLS.
2014-08-07runtests.pl: Pad test case numbers with up to three zeroesFabian Keil
Test case numbers with four digits have been available for a while now.
2014-07-26runtests.pl: Remove filteroff() which hasn't been used since 2001Fabian Keil
2014-07-26runtests.pl: Don't expect $TESTDIR/DISABLED to existFabian Keil
If a non-standard $TESTDIR is used the file may not be necessary. Previously a "missing" file resulted in the warning: readline() on closed filehandle D at ./runtests.pl line 4940.
2014-07-12gnutls: explicitly added SRP to the priority stringDan Fandrich
This seems to have become necessary for SRP support to work starting with GnuTLS ver. 2.99.0. Since support for SRP was added to GnuTLS before the function that takes this priority string, there should be no issue with backward compatibility.
2014-07-11tests: adjust for capitalization differences in newer gnutls-servDan Fandrich
2014-06-11NTLM: set a fake entropy for debug builds with CURL_ENTROPY setDaniel Stenberg
Curl_rand() will return a dummy and repatable random value for this case. Makes it possible to write test cases that verify output. Also, fake timestamp with CURL_FORCETIME set. Only when built debug enabled of course. Curl_ssl_random() was not used anymore so it has been removed. Curl_rand() is enough. create_digest_md5_message: generate base64 instead of hex string curl_sasl: also fix memory leaks in some OOM situations
2014-06-11Curl_rand: Use a fake entropy for debug builds when CURL_ENTROPY setSteve Holme
2014-04-29runtests.pl: Improved the check for a crash during torture testsDan Fandrich
2014-04-03runtests: insist on a <keywords> sectionDaniel Stenberg
Since all present tests now have <keywords> listed, this script will now refuse to run a given test case if no such section is provided. Hopefully this will help us make sure new test cases get keywords added at start.
2014-03-30runtests: check protocol before dataDaniel Stenberg
When the protocol part fails, the data usually does too but the protocol part is often more fundamental and often provide the clues you need to fix the test case.
2014-03-19runtests.pl: verify specified test casesDaniel Stenberg
To better allow arguments like "1 to 9999" without flooding the terminal with error messages, the given test cases range is now checked and only test numbers with existing files are actually run.
2014-02-17tests: Made the crypto test feature usableDan Fandrich
This feature specifies the availability of cryptographic authentication, which can be disabled at compile-time
2014-02-08runtests: allow <strippart> to remove linesDaniel Stenberg
For verify file, if the strippart condition removes the line completely it is now removed from the array.
2014-02-07runtests: Disable valgrind when debuggingDan Fandrich
This was already mostly being done, except that analysis after the test still assumed that the valgrind log files would be available. An alternative way to handle the valgrind + gdb combination could be to enable one of the valgrind debugger hooks.
2014-02-05runtests: add suppression generator helpDaniel Stenberg
Leave the valgrind --gen-suppressions option in there, commented, to make it easier for next update.
2014-02-05runtests: detect 'ares' betterDaniel Stenberg
... caused false detections of the threaded resolver otherwise
2014-01-31runtests.pl: added support for text-mode within datacheck sectionMarc Hoersken
2014-01-31runtests.pl: reverse line-ending conversion on WindowsMarc Hoersken
It makes more sense to convert the expected output to [CR][LF] on Windows than to force the actual, probably correct, output to [LF]. This way it is actually possible to see if curl outputs the correct line-ending excepted by a text-aware test case.
2014-01-24runtests: Don't log command every torture iteration in verboseDan Fandrich
2014-01-08runtests: disable memory tracking with threaded resolverDaniel Stenberg
The built-in memory debug system doesn't work with multi-threaded use so instead of causing annoying false positives, disable the memory tracking if the threaded resolver is used.
2014-01-05runtests.pl: Updated copyright year after edit from d718abd968aeb4Steve Holme
2014-01-05runtests.pl: check for tstunnel command on WindowsMarc Hoersken
The Windows console version of stunnel is called "tstunnel", while running "stunnel" on Windows spawns a new console window which cannot be handled by the testsuite.
2013-12-28runtests.pl: Fixed slightly incorrect regex in commit 28dd47d4d41900Steve Holme
2013-12-28runtests.pl: Optimised feature present checking codeSteve Holme
...to exclude not present features.
2013-12-28runtests.pl: Added the ability to run tests when a feature is not presentSteve Holme
2013-12-27ftpserver.pl: Reworked SMTP verified server detectionSteve Holme
Following the addition of informational commands to the SMTP protocol, the test server is no longer required to return the verified server information in responses that curl only outputs in verbose mode. Instead, a similar detection mechanism to that used by FTP, IMAP and POP3 can now be used.
2013-11-12runtests.pl: Added SSPI detectionSteve Holme
2013-09-18runtests.pl: Fixed syntax error in commit c873375123343eSteve Holme
Possible unintended interpolation in string at line 796
2013-09-18runtests.pl: Fixed smtp mail from addressSteve Holme
Following changes to ftpserver.pl fixed the mail from address to be a correctly formatted address otherwise the server response will be 501 Invalid address.
2013-08-26runtests.pl: allow -vc point to a separate curl binary to verify withDaniel Stenberg
The specified curl binary will then be used to verify the running server(s) instead of the development version. This is very useful in some cases when the development version fails to verify correctly as then the test case may not run at all. The actual test will still be run with the "normal" curl executable (unless the test case specifies something differently).
2013-08-20curl_easy_perform_ev: debug/test functionDaniel Stenberg
This function is meant to work *exactly* as curl_easy_perform() but will use the event-based libcurl API internally instead of curl_multi_perform(). To avoid relying on an actual event-based library and to not use non-portable functions (like epoll or similar), there's a rather inefficient emulation layer implemented on top of Curl_poll() instead. There's currently some convenience logging done in curl_easy_perform_ev which helps when tracking down problems. They may be suitable to remove or change once things seem to be fine enough. curl has a new --test-event option when built with debug enabled that then uses curl_easy_perform_ev() instead of curl_easy_perform(). If built without debug, using --test-event will only output a warning message. NOTE: curl_easy_perform_ev() is not part if the public API on purpose. It is only present in debug builds of libcurl and MUST NOT be considered stable even then. Use it for libcurl-testing purposes only. runtests.pl now features an -e command line option that makes it use --test-event for all curl command line tests. The man page is updated.
2013-05-07runtests.pl: support nonewline="yes" in client/stdin sectionsDaniel Stenberg
2013-04-25runtests: log more commands in verbose modeDaniel Stenberg
... to aid tracking down failures
2013-04-06runtests.pl: Fixed --verbose parameter passed to http_pipe.pyMarc Hoersken
2013-04-06runtests.pl: Modularization of MinGW/Msys compatibility functionsMarc Hoersken
2013-03-15tests: add #96 #558 and #1330Yang Tse
These verfy that the 'memory tracking' subsystem is actually doing its job when using curl tool (#96), a test in libtest (#558) and also a unit test (#1330), in order to prevent regressions in this functionallity.
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-02-24darwinssl: fix undefined $ssllib warning in runtests.plNick Zitzmann
I also added --with-darwinssl to the list of SSL options in configure.
2013-01-18runtests.pl: make VPATH builds find valgrind.suppYang Tse
2013-01-17always-multi: always use non-blocking internalsDaniel Stenberg
Remove internal separated behavior of the easy vs multi intercace. curl_easy_perform() is now using the multi interface itself. Several minor multi interface quirks and bugs have been fixed in the process. Much help with debugging this has been provided by: Yang Tse
2013-01-02build and tests: curl_10char_object_name() shell functionYang Tse
lib/objnames.inc provides definition of curl_10char_object_name() shell function. The intended purpose of this function is to transliterate a (*.c) source file name that may be longer than 10 characters, or not, into a string with at most 10 characters which may be used as an OS/400 object name. Test case 1221 does unit testng of this function and also verifies that it is possible to generate distinct short object names for all curl and libcurl *.c source file names. lib/objnames-test.sh is the shell script used for test case 1221. tests/runtests.pl modified to accept shell script test cases. More details inside lib/objnames.inc and lib/objnames-test.sh