aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-04-29CURL_MAX_INPUT_LENGTH: largest acceptable string input sizeDaniel Stenberg
This limits all accepted input strings passed to libcurl to be less than CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls: curl_easy_setopt() and curl_url_set(). The 8000000 number is arbitrary picked and is meant to detect mistakes or abuse, not to limit actual practical use cases. By limiting the acceptable string lengths we also reduce the risk of integer overflows all over. NOTE: This does not apply to `CURLOPT_POSTFIELDS`. Test 1559 verifies. Closes #3805
2019-04-22sasl: Don't send authcid as authzid for the PLAIN mechanism as per RFC 4616Steve Holme
RFC 4616 specifies the authzid is optional in the client authentication message and that the server will derive the authorisation identity (authzid) from the authentication identity (authcid) when not specified by the client.
2019-04-21test 196,197,198: add 'retry' keyword [skip ci]Daniel Stenberg
2019-04-20test1002: correct the name [skip ci]Daniel Stenberg
2019-04-20test660: verify CONNECT_ONLY with IMAPDaniel Stenberg
which basically just makes sure LOGOUT is *not* issued on disconnect
2019-04-15tests: Run global cleanup at end of testsDaniel Gustafsson
Make sure to run curl_global_cleanup() when shutting down the test suite to release any resources allocated in the SSL setup. This is clearly visible when running tests with PolarSSL where the thread lock calloc() memory which isn't released when not running cleanup. Below is an excerpt from the autobuild logs: ==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2 ==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752) ==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205) ==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup (polarssl_threadlock.c:54) ==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865) ==12368== by 0x14129D: Curl_ssl_init (vtls.c:171) ==12368== by 0x118B4C: global_init (easy.c:158) ==12368== by 0x118BF5: curl_global_init (easy.c:221) ==12368== by 0x118D0B: curl_easy_init (easy.c:299) ==12368== by 0x114E96: test (lib1906.c:32) ==12368== by 0x115495: main (first.c:174) Closes #3783 Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com> Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-04-15runtests: start socksd like other serversDaniel Stenberg
... without a $srcdir prefix. Triggered by the failures in several autobuilds. Closes #3781
2019-04-14socksd: Fix typosDaniel Gustafsson
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-04-14socksd: Properly decorate static variablesDaniel Gustafsson
Mark global variables static to avoid compiler warning in Clang when using -Wmissing-variable-declarations. Closes #3778 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-04-13test: make tests and test scripts use socksd for SOCKSDaniel Stenberg
Make all SOCKS tests use socksd instead of ssh.
2019-04-13socksd: new SOCKS 4+5 server for testsDaniel Stenberg
Closes #3752
2019-04-13urlapi: stricter CURLUPART_PORT parsingDaniel Stenberg
Only allow well formed decimal numbers in the input. Document that the number MUST be between 1 and 65535. Add tests to test 1560 to verify the above. Ref: https://github.com/curl/curl/issues/3753 Closes #3762
2019-04-11test1906: verify CURLOPT_CURLU + CURLOPT_PORT usageDaniel Stenberg
Based-on-code-by: Poul T Lomholt
2019-04-11CURLOPT_DNS_USE_GLOBAL_CACHE: removeDaniel Stenberg
Remove the code too. The functionality has been disabled in code since 7.62.0. Setting this option will from now on simply be ignored and have no function. Closes #3654
2019-04-11build: fix Codacy/CppCheck warningsMarcel Raad
- remove unused variables - declare conditionally used variables conditionally - suppress unused variable warnings in the CMake tests - remove dead variable stores - consistently use WIN32 macro to detect Windows Closes https://github.com/curl/curl/pull/3739
2019-04-11lib557: initialize variablesMarcel Raad
These variables are only conditionally initialized. Closes https://github.com/curl/curl/pull/3739
2019-04-11lib509: add missing include for strdupMarcel Raad
Closes https://github.com/curl/curl/pull/3739
2019-04-11tests/server/util: fix Windows Unicode buildMarcel Raad
Always use the ANSI version of FormatMessage as we don't have the curl_multibyte gear available here. Closes https://github.com/curl/curl/pull/3758
2019-04-11xattr: skip unittest on unsupported platformsDaniel Gustafsson
The stripcredentials unittest fails to compile on platforms without xattr support, for example the Solaris member in the buildfarm which fails with the following: CC unit1621-unit1621.o CC ../libtest/unit1621-first.o CCLD unit1621 Undefined first referenced symbol in file stripcredentials unit1621-unit1621.o goto problem 2 ld: fatal: symbol referencing errors. No output written to .libs/unit1621 collect2: error: ld returned 1 exit status gmake[2]: *** [Makefile:996: unit1621] Error 1 Fix by excluding the test on such platforms by using the reverse logic from where stripcredentials() is defined. Closes #3759 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-04-07test: urlapi: urlencode characters above 0x7f correctlyJakub Zakrzewski
2019-04-06pipelining: removedDaniel Stenberg
As previously planned and documented in DEPRECATE.md, all pipelining code is removed. Closes #3651
2019-04-06tests: make Impacket (SMB server) Python 3 compatiblecclauss
Closes #3731 Fixes #3289
2019-04-02vauth/oauth2: Fix OAUTHBEARER token generationMert Yazıcıoğlu
OAUTHBEARER tokens were incorrectly generated in a format similar to XOAUTH2 tokens. These changes make OAUTHBEARER tokens conform to the RFC7628. Fixes: #2487 Reported-by: Paolo Mossino Closes https://github.com/curl/curl/pull/3377
2019-03-24tests: Fixed XML validation errors in some test files.Dan Fandrich
2019-03-24tests: Fix some incorrect precheck error messages.Dan Fandrich
[ci skip]
2019-03-18test1541: threaded connection sharingDaniel Stenberg
The threaded-shared-conn.c example turned into test case. Only works if pthread was detected. An attempt to detect future regressions such as e3a53e3efb942a5 Closes #3687
2019-03-14makefile: make checksrc and hugefile commands "silent"Daniel Stenberg
... to match the style already used for compiling, linking etc. Acknowledges 'make V=1' to enable verbose. Closes #3681
2019-03-14fuzzer: Only clone the latest fuzzer code, for speed.Dan Fandrich
2019-03-14Negotiate: fix for HTTP POST with NegotiateDominik Hölzl
* Adjusted unit tests 2056, 2057 * do not generally close connections with CURLAUTH_NEGOTIATE after every request * moved negotiatedata from UrlState to connectdata * Added stream rewind logic for CURLAUTH_NEGOTIATE * introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC * Consider authproblem state for CURLAUTH_NEGOTIATE * Consider reuse_forbid for CURLAUTH_NEGOTIATE * moved and adjusted negotiate authentication state handling from output_auth_headers into Curl_output_negotiate * Curl_output_negotiate: ensure auth done is always set * Curl_output_negotiate: Set auth done also if result code is GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may also indicate the last challenge request (only works with disabled Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1) * Consider "Persistent-Auth" header, detect if not present; Reset/Cleanup negotiate after authentication if no persistent authentication * apply changes introduced with #2546 for negotiate rewind logic Fixes #1261 Closes #1975
2019-03-13http: send payload when (proxy) authentication is doneMarc Schlatter
The check that prevents payload from sending in case of authentication doesn't check properly if the authentication is done or not. They're cases where the proxy respond "200 OK" before sending authentication challenge. This change takes care of that. Fixes #2431 Closes #3669
2019-03-09test331: verify set-cookie for dotless host nameDaniel Stenberg
Reproduced bug #3649 Closes #3659
2019-03-09Revert "cookies: extend domain checks to non psl builds"Daniel Stenberg
This reverts commit 3773de378d48b06c09931e44dca4d274d0bfdce0. Regression shipped in 7.64.0 Fixes #3649
2019-03-08memdebug: make debug-specific functions use curl_dbg_ prefixDaniel Stenberg
To not "collide" or use up the regular curl_ name space. Also makes them easier to detect in helper scripts. Closes #3656
2019-03-05tests: fix multiple may be used uninitialized warningsDaniel Stenberg
2019-03-05multi: support verbose conncache closure handleJay Satiro
- Change closure handle to receive verbose setting from the easy handle most recently added via curl_multi_add_handle. The closure handle is a special easy handle used for closing cached connections. It receives limited settings from the easy handle most recently added to the multi handle. Prior to this change that did not include verbose which was a problem because on connection shutdown verbose mode was not acknowledged. Ref: https://github.com/curl/curl/pull/3598 Co-authored-by: Daniel Stenberg Closes https://github.com/curl/curl/pull/3618
2019-03-04CURLU: fix NULL dereference when used over proxyDaniel Stenberg
Test 659 verifies Also fixed the test 658 name Closes #3641
2019-03-03alt-svc: add test 355 and 356 to verify with command line curlDaniel Stenberg
2019-03-03alt-svc: the libcurl bitsDaniel Stenberg
2019-02-28test578: make it read data from the correct testDaniel Stenberg
2019-02-27cookies: only save the cookie file if the engine is enabledDaniel Stenberg
Follow-up to 8eddb8f4259. If the cookieinfo pointer is NULL there really is nothing to save. Without this fix, we got a problem when a handle was using shared object with cookies and is told to "FLUSH" it to file (which worked) and then the share object was removed and when the easy handle was closed just afterwards it has no cookieinfo and no cookies so it decided to save an empty jar (overwriting the file just flushed). Test 1905 now verifies that this works. Assisted-by: Michael Wallner Assisted-by: Marcel Raad Closes #3621
2019-02-26runtests: detect "schannel" as an alias for "winssl"Daniel Stenberg
Follow-up to 180501cb02 Reported-by: Marcel Raad Fixes #3609 Closes #3620
2019-02-21tests: Fixed XML validation errors in some test files.Dan Fandrich
2019-02-20curl: remove MANUAL from -M outputDaniel Stenberg
... and remove it from the dist tarball. It has served its time, it barely gets updated anymore and "everything curl" is now convering all this document once tried to include, and does it more and better. In the compressed scenario, this removes ~15K data from the binary, which is 25% of the -M output. It remains in the git repo for now for as long as the web site builds a page using that as source. It renders poorly on the site (especially for mobile users) so its not even good there. Closes #3587
2019-02-19connection: never reuse CONNECT_ONLY conectionsDaniel Stenberg
and make CONNECT_ONLY conections never reuse any existing ones either. Reported-by: Pavel Löbl Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html Closes #3586
2019-02-19unit1651: survive curl_easy_init() failsDaniel Stenberg
2019-02-17cookie: Add support for cookie prefixesDaniel Gustafsson
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes and how they should affect cookie initialization, which has been adopted by the major browsers. This adds support for the two prefixes defined, __Host- and __Secure, and updates the testcase with the supplied examples from the draft. Closes #3554 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-02-15unit1307: just fail without FTP supportMarcel Raad
I missed to check this in with commit 71786c0505926aaf7e9b2477b2fb7ee16a915ec6, which only disabled the test. This fixes the actual linker error. Closes https://github.com/curl/curl/pull/3568
2019-02-14gssapi: fix deprecated header warningsDaniel Stenberg
Heimdal includes on FreeBSD spewed out lots of them. Less so now. Closes #3566
2019-02-13unit1307: require FTP supportMarcel Raad
This test doesn't link without FTP support after fc7ab4835b5fd09d0a6f57000633bb6bb6edfda1, which made Curl_fnmatch unavailable without FTP support. Closes https://github.com/curl/curl/pull/3565
2019-02-11tests: add stderr comparison to the test suiteFrank Gevaerts
The code is more or less copied from the stdout comparison code, maybe some better reuse is possible. test 1457 is adjusted to make the output actually match (by using --silent) test 506 used <stderr> without actually needing it, so that <stderr> block is removed Closes #3536
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 07:14:28 +0000