aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2020-03-07lib1564: reduce number of mid-wait wakeup callsDaniel Stenberg
This test does A LOT of *wakeup() calls and then calls curl_multi_poll() twice. The first *poll() is then expected to return early and the second not - as the first is supposed to drain the socketpair pipe. It turns out however that when given "excessive" amounts of writes to the pipe, some operating systems (the Solaris based are known) will return EAGAIN before the pipe is drained, which in our test case causes the second *poll() call to also abort early. This change attempts to avoid the OS-specific behaviors in the test by reducing the amount of wakeup calls from 1234567 to 10. Reported-by: Andy Fiddaman Fixes #5037 Closes #5058
2020-03-07mime: fix the binary encoder to handle large data properlyPatrick Monnerat
New test 666 checks this is effective. As upload buffer size is significant in this kind of tests, shorten it in similar test 652. Fixes #4860 Closes #4833 Reported-by: RuurdBeerstra on github
2020-03-07mime: do not perform more than one read in a rowPatrick Monnerat
Input buffer filling may delay the data sending if data reads are slow. To overcome this problem, file and callback data reads do not accumulate in buffer anymore. All other data (memory data and mime framing) are considered as fast and still concatenated in buffer. As this may highly impact performance in terms of data overhead, an early end of part data check is added to spare a read call. When encoding a part's data, an encoder may require more bytes than made available by a single read. In this case, the above rule does not apply and reads are performed until the encoder is able to deliver some data. Tests 643, 644, 645, 650 and 654 have been adapted to the output data changes, with test data size reduced to avoid the boredom of long lists of 1-byte chunks in verification data. New test 667 checks mimepost using single-byte read callback with encoder. New test 668 checks the end of part data early detection. Fixes #4826 Reported-by: MrdUkk on github
2020-03-07mime: latch last read callback status.Patrick Monnerat
In case a read callback returns a status (pause, abort, eof, error) instead of a byte count, drain the bytes read so far but remember this status for further processing. Takes care of not losing data when pausing, and properly resume a paused mime structure when requested. New tests 670-673 check unpausing cases, with easy or multi interface and mime or form api. Fixes #4813 Reported-by: MrdUkk on github
2020-03-07runtests: fix missing use of exe_ext helper functionMarc Hoersken
2020-03-07tests: use native Sleep function as fallback on WindowsMarc Hoersken
Reviewed-By: Daniel Stenberg Closes #5054
2020-03-07perl: align order and completeness of Windows OS checksMarc Hoersken
2020-03-07libssh: Fix matching user-specified MD5 hex keyJay Satiro
Prior to this change a match would never be successful because it was mistakenly coded to compare binary data from libssh to a user-specified hex string (ie CURLOPT_SSH_HOST_PUBLIC_KEY_MD5). Reported-by: fds242@users.noreply.github.com Fixes https://github.com/curl/curl/issues/4971 Closes https://github.com/curl/curl/pull/4974
2020-03-06unit1612: fixed the inclusion and compilation of the HMAC unit testSteve Holme
Follow up to 3f74e5e6 to fix: - A typo in Makefile.inc where unit1611 was used instead - Some compilation issues in unit1612.c Closes #5024
2020-03-05polarssl: remove more references and mentionsDaniel Stenberg
Assisted-by: Jay Satiro Follow-up to 6357a19ff29dac04 Closes #5036
2020-03-04tests: wrap ignored test failures in bracesMarc Hoersken
2020-03-04tests: align some Windows sleep defines with each otherMarc Hoersken
2020-03-04tests: try to make sleeping portable by avoiding selectMarc Hoersken
select does not support just waiting on Windows: https://perldoc.perl.org/perlport.html#select Reviewed-By: Daniel Stenberg Closes #5035
2020-03-04runtests.1: rephrase how to specify what tests to runDaniel Stenberg
Also mention the new tilde-prefixed way to ignore test results. Reviewed-By: Marc Hoersken Closes #5033
2020-03-03ci/tests: fix escaping of testnames and disable proxy for CI APIsMarc Hoersken
Follow up to ada581f and c0d8b96 Closes #5031
2020-03-03ci/tests: Make it possible to still run but ignore failing testsMarc Hoersken
This enables the development of a solution for the failing tests by running them on CI while ignoring their result for the overall status. Closes #4994
2020-03-03ci/tests: Move CI test result creation above environment setupMarc Hoersken
This avoids using our test servers as proxy to the AppVeyor API. Closes #5022
2020-03-03ci/tests: Send test results to AppVeyor for status overviewMarc Hoersken
Closes #5021
2020-03-03dist: include tests/azure.pm in the tarballDaniel Stenberg
Bug: https://github.com/curl/curl/commit/ada581f2cc32f48c1629b729707ac19208435b27#commitcomment-37601589 Reported-by: Marcel Raad
2020-03-02tests: disable 962, 963 and 964 on WindowsDaniel Stenberg
These tests are also doing UTF-8 SMTP. Follow-up to df207d2dd93b9e73
2020-03-02tests: disable SMTP UTF-8 tests on WindowsSteve Holme
Fixes #4988 Closes #4992
2020-03-02Revert "mime: latch last read callback status."Daniel Stenberg
This reverts commit 87869e38d7afdec3ef1bb4965711458b088e254f. Fixes #5014 Closes #5015 Reopens #4833
2020-03-02Revert "mime: do not perform more than one read in a row"Daniel Stenberg
This reverts commit ed0f357f7d25566110d4302f33759f4ffb5a6f83.
2020-03-02Revert "mime: fix the binary encoder to handle large data properly"Daniel Stenberg
This reverts commit b2caaa0681f329eed317ffb6ae6927f4a539f0c1.
2020-03-02mime: fix the binary encoder to handle large data properlyPatrick Monnerat
New test 666 checks this is effective. As upload buffer size is significant in this kind of tests, shorten it in similar test 652. Fixes #4860 Reported-by: RuurdBeerstra on github
2020-03-02mime: do not perform more than one read in a rowPatrick Monnerat
Input buffer filling may delay the data sending if data reads are slow. To overcome this problem, file and callback data reads do not accumulate in buffer anymore. All other data (memory data and mime framing) are considered as fast and still concatenated in buffer. As this may highly impact performance in terms of data overhead, an early end of part data check is added to spare a read call. When encoding a part's data, an encoder may require more bytes than made available by a single read. In this case, the above rule does not apply and reads are performed until the encoder is able to deliver some data. Tests 643, 644, 645, 650 and 654 have been adapted to the output data changes, with test data size reduced to avoid the boredom of long lists of 1-byte chunks in verification data. New test 664 checks mimepost using single-byte read callback with encoder. New test 665 checks the end of part data early detection. Fixes #4826 Reported-by: MrdUkk on github
2020-03-02mime: latch last read callback status.Patrick Monnerat
In case a read callback returns a status (pause, abort, eof, error) instead of a byte count, drain the bytes read so far but remember this status for further processing. Takes care of not losing data when pausing, and properly resume a paused mime structure when requested. New tests 670-673 check unpausing cases, with easy or multi interface and mime or form api. Fixes #4813 Reported-by: MrdUkk on github Closes #4833
2020-03-01unit1651: Fixed conversion compilation warningSteve Holme
371:17: warning: conversion to 'unsigned char' from 'int' may alter its value [-Wconversion] Closes #5008
2020-03-01ci/tests: Fix typo in previous commit 597cf2Marc Hoersken
2020-03-01ci/tests: Make sure that the AZURE_ACCESS_TOKEN is availableMarc Hoersken
For security reasons the access token is not available to PR builds. Therefore we should not try to use the DevOps API with an empty token.
2020-02-29runtests: fix output to command logJay Satiro
- Record only the command of the most recently ran test in the command log. This is a follow-up to 02988b7 from several weeks ago which fixed writing to the command log, however it saved all commands for all tests instead of just the most recently ran test as we would now expect. Fixes https://github.com/curl/curl/commit/02988b7#commitcomment-37546876 Closes https://github.com/curl/curl/pull/5001
2020-02-29ci/tests: Send test results to Azure DevOps for reportingMarc Hoersken
2020-02-27tests: fix Python 3 compatibility of smbserver.pyMarc Hoersken
2020-02-27runtests: restore the command logDaniel Stenberg
The log file with all command lines for the invoked command lines is now called logs/commands.log Fixes #4911 Closes #4989
2020-02-27http2: make pausing/unpausing set/clear local stream windowDaniel Stenberg
This reduces the HTTP/2 window size to 32 MB since libcurl might have to buffer up to this amount of data in memory and yet we don't want it set lower to potentially impact tranfer performance on high speed networks. Requires nghttp2 commit b3f85e2daa629 (https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end up in the next release after 1.40.0. Fixes #4939 Closes #4940
2020-02-27tests: Automatically deduce the tool name from the test case for unit testsSteve Holme
It is still possible to override the executable to run during the test, using the <tool> tag, but this patch removes the requirement that the tag must be present for unit tests. It also removes the possibility of human error when existing test cases are used as the basis for new tests, as recently witnessed in 81c37124. Reviewed-by: Daniel Stenberg Closes #4976
2020-02-27test1323: Added the missing 'unit test' feature requirement in the test caseSteve Holme
2020-02-26http: added 417 response treatmentDaniel Stenberg
When doing a request with a body + Expect: 100-continue and the server responds with a 417, the same request will be retried immediately without the Expect: header. Added test 357 to verify. Also added a control instruction to tell the sws test server to not read the request body if Expect: is present, which the new test 357 uses. Reported-by: bramus on github Fixes #4949 Closes #4964
2020-02-26smtp: Support the SMTPUTF8 extension for the EXPN commandSteve Holme
Simply notify the server we support the SMTPUTF8 extension if it does.
2020-02-26smtp: Support the SMTPUTF8 extension in the VRFY commandSteve Holme
2020-02-26smtp: Support the SMTPUTF8 extension in the RCPT TO commandSteve Holme
Note: The RCPT TO command isn't required to advertise to the server that it contains UTF-8 characters, instead the server is told that a mail may contain UTF-8 in any envelope command via the MAIL command.
2020-02-26smtp: Support the SMTPUTF8 extension in the MAIL commandSteve Holme
Support the SMTPUTF8 extension when sending mailbox information in the MAIL command (FROM and AUTH parameters). Non-ASCII domain names will be ACE encoded, if IDN is supported, whilst non-ASCII characters in the local address part are passed to the server. Reported-by: ygthien on github Fixes #4828
2020-02-26smtp: Support UTF-8 based host names in the VRFY commandSteve Holme
2020-02-26smtp: Support UTF-8 based host names in the RCPT TO commandSteve Holme
2020-02-26smtp: Support UTF-8 based host names in the MAIL commandSteve Holme
Non-ASCII host names will be ACE encoded if IDN is supported.
2020-02-25smtp: Added UTF-8 mailbox tests to verify existing behaviourSteve Holme
2020-02-24ftpserver: Updated VRFY_smtp() so the response isn't necessary in the test caseSteve Holme
2020-02-24ftpserver: Corrected the e-mail address regex in MAIL_smtp() and RCTP_smtp()Steve Holme
The dot character between the host and the tld was not being escaped, which meant it specified a match of 'any' character rather than an explicit dot separator. Additionally removed the dot character from the host name as it allowed the following to be specified as a valid address in our test cases: <bad@example......com> Both are typos from 98f7ca7 and 8880f84 :( I can't remember whether my intention was to allow sub-domains to be specified in the host or not with these additional dots, but by placing it outside of the host means it can only be specified once per domain and by placing a + after the new grouping support for sub-domains is kept. Closes #4912
2020-02-24hmac: Added a unit test for the HMAC hash generationSteve Holme
Closes #4973
2020-02-23tests: Added a unit test for MD4 digest generationSteve Holme
Closes #4970
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 01:30:35 +0000