Age | Commit message (Collapse) | Author |
|
Follow up to 9819984 and 3dce984
Reviewed-By: Daniel Stenberg
Closes #5064
|
|
|
|
This fix adds a defensive check for the case where the char *name in
struct libssh2_knownhost is NULL
Fixes #5041
Closes #5062
|
|
Recent gcc warns when byte count of strncpy() equals the destination
buffer size. Since the destination buffer is previously cleared and
the source string is always shorter, reducing the byte count by one
silents the warning without affecting the result.
Closes #5059
|
|
When using maximum code optimization level (-O3), valgrind wrongly
detects uses of uninitialized values in strcmp().
Preset buffers with all zeroes to avoid that.
|
|
This test does A LOT of *wakeup() calls and then calls curl_multi_poll()
twice. The first *poll() is then expected to return early and the second
not - as the first is supposed to drain the socketpair pipe.
It turns out however that when given "excessive" amounts of writes to
the pipe, some operating systems (the Solaris based are known) will
return EAGAIN before the pipe is drained, which in our test case causes
the second *poll() call to also abort early.
This change attempts to avoid the OS-specific behaviors in the test by
reducing the amount of wakeup calls from 1234567 to 10.
Reported-by: Andy Fiddaman
Fixes #5037
Closes #5058
|
|
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes #4860
Closes #4833
Reported-by: RuurdBeerstra on github
|
|
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 667 checks mimepost using single-byte read callback with encoder.
New test 668 checks the end of part data early detection.
Fixes #4826
Reported-by: MrdUkk on github
|
|
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes #4813
Reported-by: MrdUkk on github
|
|
|
|
Reviewed-By: Daniel Stenberg
Closes #5054
|
|
|
|
Prior to this change a match would never be successful because it
was mistakenly coded to compare binary data from libssh to a
user-specified hex string (ie CURLOPT_SSH_HOST_PUBLIC_KEY_MD5).
Reported-by: fds242@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/4971
Closes https://github.com/curl/curl/pull/4974
|
|
Follow up to 3f74e5e6 to fix:
- A typo in Makefile.inc where unit1611 was used instead
- Some compilation issues in unit1612.c
Closes #5024
|
|
Assisted-by: Jay Satiro
Follow-up to 6357a19ff29dac04
Closes #5036
|
|
|
|
|
|
select does not support just waiting on Windows:
https://perldoc.perl.org/perlport.html#select
Reviewed-By: Daniel Stenberg
Closes #5035
|
|
Also mention the new tilde-prefixed way to ignore test results.
Reviewed-By: Marc Hoersken
Closes #5033
|
|
Follow up to ada581f and c0d8b96
Closes #5031
|
|
This enables the development of a solution for the failing tests by
running them on CI while ignoring their result for the overall status.
Closes #4994
|
|
This avoids using our test servers as proxy to the AppVeyor API.
Closes #5022
|
|
Closes #5021
|
|
Bug: https://github.com/curl/curl/commit/ada581f2cc32f48c1629b729707ac19208435b27#commitcomment-37601589
Reported-by: Marcel Raad
|
|
These tests are also doing UTF-8 SMTP.
Follow-up to df207d2dd93b9e73
|
|
Fixes #4988
Closes #4992
|
|
This reverts commit 87869e38d7afdec3ef1bb4965711458b088e254f.
Fixes #5014
Closes #5015
Reopens #4833
|
|
This reverts commit ed0f357f7d25566110d4302f33759f4ffb5a6f83.
|
|
This reverts commit b2caaa0681f329eed317ffb6ae6927f4a539f0c1.
|
|
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes #4860
Reported-by: RuurdBeerstra on github
|
|
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes #4826
Reported-by: MrdUkk on github
|
|
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes #4813
Reported-by: MrdUkk on github
Closes #4833
|
|
371:17: warning: conversion to 'unsigned char' from 'int' may alter its
value [-Wconversion]
Closes #5008
|
|
|
|
For security reasons the access token is not available to PR builds.
Therefore we should not try to use the DevOps API with an empty token.
|
|
- Record only the command of the most recently ran test in the command
log.
This is a follow-up to 02988b7 from several weeks ago which fixed
writing to the command log, however it saved all commands for all tests
instead of just the most recently ran test as we would now expect.
Fixes https://github.com/curl/curl/commit/02988b7#commitcomment-37546876
Closes https://github.com/curl/curl/pull/5001
|
|
|
|
|
|
The log file with all command lines for the invoked command lines is now
called logs/commands.log
Fixes #4911
Closes #4989
|
|
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes #4939
Closes #4940
|
|
It is still possible to override the executable to run during the test,
using the <tool> tag, but this patch removes the requirement that the
tag must be present for unit tests.
It also removes the possibility of human error when existing test cases
are used as the basis for new tests, as recently witnessed in 81c37124.
Reviewed-by: Daniel Stenberg
Closes #4976
|
|
|
|
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes #4949
Closes #4964
|
|
Simply notify the server we support the SMTPUTF8 extension if it does.
|
|
|
|
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
|
|
Support the SMTPUTF8 extension when sending mailbox information in the
MAIL command (FROM and AUTH parameters). Non-ASCII domain names will
be ACE encoded, if IDN is supported, whilst non-ASCII characters in
the local address part are passed to the server.
Reported-by: ygthien on github
Fixes #4828
|
|
|
|
|
|
Non-ASCII host names will be ACE encoded if IDN is supported.
|