aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2012-06-21test 2005: add verification of hash checking outcomeYang Tse
2012-06-21getpart.pm: remove misleading commentYang Tse
2012-06-21tests: Added Metalink test case # 2005Tatsuhiro Tsujikawa
2012-06-20runtests.pl: make it support metalink featureTatsuhiro Tsujikawa
2012-06-20getpart.pm: make test definition section/part parser more robustYang Tse
Test definition section parts which needed to include xml-lingo as contents of that part required that the xml-blurb was written as a single line. Now the xml-data inside the part can be written multiline making it more readable. Tested with <client><file> part which is written to disk before <command> runs.
2012-06-15Fixed typo.Guenter Knauf
2012-06-11tests: fix test definitions # 1355, 1363, 1385 and 1393Yang Tse
-i without HTTP protocol shall not include headers in the output
2012-06-09Fixes allowing 26 more test cases in 1334 to 1393 range to succeedYang Tse
2012-06-09tests: fix test definitions # 1370 and 1371Yang Tse
-J without -O shall not honor C-D filename
2012-06-07lib554.c: use curl_formadd() properlyDaniel Stenberg
The length/size options take longs so make sure to pass on such types. Reported by: Neil Bowers Bug: http://curl.haxx.se/mail/lib-2012-06/0001.html
2012-06-07Fixes allowing HTTP test cases 1338, 1339, 1368 and 1369 to succeedYang Tse
2012-06-07tests 1364 to 1393: several -o filename -J -i -D combinations for HTTP and FTPYang Tse
2012-06-07tests 1348 to 1363: test definition polishingYang Tse
Verify that the "Saved to filename 'blabla'" message is only displayed when the 'blabla' filename being used _actually_ has been specified by the server in the Content-Disposition header. Use relative path for unintended file creation postcheck.
2012-06-06Disable non-HTTP header related testsYang Tse
These now detect incompleate header data and fail
2012-06-06tests 1348 to 1363: compleate header data part of test definitionYang Tse
2012-06-05tests 1334 to 1363 revisited.Yang Tse
Add a postcheck section to verify unintended file creation. Remove needless <file> checks in verify section. Renumbering where appropriate.
2012-06-05tests: adjust file part behavior in test verify section.Yang Tse
When a <file> part is now specified with no contents at all, this will actually verify that the specified file has no contents at all. Previously file contents would be ignored.
2012-06-05tests 1348 to 1363: add a comma in test descriptionYang Tse
2012-06-04pop3 tests: CAPA instead of AUTHDaniel Stenberg
After Steve's commit e336bc7c42c7340 test 1319 and 1407 need to check for CAPA instead of AUTH.
2012-06-04tests 1356 to 1363: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1356 to 1362 succeed but a write failure is logged in traceNNNN. Currently 1363 fails, so disabled for now.
2012-06-04tests: Updated pop3 tests for change in auth mechanism detectionSteve Holme
2012-06-04tests 1348 to 1355: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1348 to 1354 succeed but a write failure is logged in traceNNNN. Currently 1355 fails, so disabled for now.
2012-06-04tests 1346 to 1347: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-01tests 1334 to 1345: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-01tests: support test definitions with up to 5 file checks in <verify> sectionYang Tse
This is done introducing tags <file1> to <file4> besides existing <file> one, as well as corresponding <stripfile1> to <stripfile4> ones, that can be used in the <verify> section in the same way as the non-numbered ones.
2012-05-30pop3 test server: allow pop3 test server verification to succeed againYang Tse
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further pop3 test server expansion for tests that require CAPA or AUTH support, although this will need some extra work to make it fully functional.
2012-05-27test1013.pl: filter out MetalinkDaniel Stenberg
Since it isn't a feature supported by curl-config we can't compare that with the --version output
2012-05-27pop3: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the AUTH command. There are two ways of detecting them, either by using the AUTH command, that will return -ERR if not supported or by using the CAPA command which will return SASL and the list of mechanisms if supported, not include SASL if SASL authentication is not supported or -ERR if the CAPA command is not supported. As such it seems simpler to use the AUTH command and fallback to normal clear text authentication if the the command is not supported. Additionally updated the test cases to return -ERR when the AUTH command is encountered. Additional test cases will be added when support for the individual authentication mechanisms is added.
2012-05-25Made -D option work with -O and -J.Tatsuhiro Tsujikawa
To achieve this, first new structure HeaderData is defined to hold necessary data to perform header-related work. Then tool_header_cb now receives HeaderData pointer as userdata. All header-related work (currently, dumping header and Content-Disposition inspection) are done in this callback function. HeaderData.outs->config is used to determine whether each work is done. Unit tests were also updated because after this change, curl code always sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA. Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
2012-04-20HTTP: empty chunked POST ended up in two zero size chunksDaniel Stenberg
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the size of the POST was zero length, it made libcurl first send a zero chunk and then the terminating one. This could confuse a receiver and it should rather just send the terminating chunk as it does with this fix. Test case 1333 is added to verify. Bug: http://curl.haxx.se/mail/archive-2012-04/0060.html Reported by: Arnaud Compan
2012-04-18Some explicit conversion to 'long' of curl_easy_setopt() third argumentYang Tse
Explicit conversion to 'long' of curl_easy_setopt() third argument for options CURLOPT_HTTPAUTH and CURLOPT_PROXYAUTH given that this is how its bitmasks are docummented to be used.
2012-04-17build adjustments: commit 9e24b9c7 follow-upYang Tse
2012-04-16tests/valgrind.pm: suppress memleaks of NSS_InitContext()Kamil Dudka
Bug: https://bugzilla.mozilla.org/show_bug.cgi?id=745224
2012-04-14headers: require GCC 2.7 or newer in order to allow attribute GCC'isms usageYang Tse
Usage in other code paths already protected and requiring even newer versions.
2012-04-13testcurl.pl: build example programs for Android cross-compilesYang Tse
2012-04-12testcurl.pl: build example programs for MinGW cross-compilesYang Tse
2012-04-12testcurl.pl: log more environment vars that modify configure and build behaviorYang Tse
2012-04-12configure: NATIVE_WINDOWS no longer defined in config filesYang Tse
2012-04-11build adjustments: CURL_HIDDEN_SYMBOLS no longer defined in config filesYang Tse
configure script now provides conditional definitions for Makefile.am that result in CURL_HIDDEN_SYMBOLS being defined by resulting makefiles when appropriate. Additionally, configure script option for symbol hiding control is now named --enable-symbol-hiding --disable-symbol-hiding. While still valid, old option name --enable-hidden-symbols --disable-hidden-symbols will be deprecated in some future release.
2012-04-11build adjustments: functionally revert commits 4d3fb91f and bbfe1182Yang Tse
Undefining CURL_HIDDEN_SYMBOLS in source files isn't the proper fix.
2012-04-10test servers: build adjustmentYang Tse
Undefine CURL_HIDDEN_SYMBOLS libcurl private preprocessor macro that might leak from lib/setup.h into source files where this should not be defined.
2012-04-10libtests: build adjustmentYang Tse
Undefine CURL_HIDDEN_SYMBOLS libcurl private preprocessor macro that might leak from lib/setup.h into source files where this should not be defined.
2012-04-09configure: Windows cross-compilation fixesYang Tse
BUILDING_LIBCURL and CURL_STATICLIB are no longer defined in curl_config.h, configure will generate appropriate conditionals so that mentioned symbols get defined and used in Makefiles at compilation time
2012-04-05test: added test 1332 that tests --post303Daniel Stenberg
2012-04-05test1331: cookies on a 407 responseDaniel Stenberg
Verify that cookies are sent back even after a 407 response has been received
2012-04-04lib599.c: fix compiler warningYang Tse
2012-04-04runtests: yassl and polarssl are not opensslDaniel Stenberg
Don't set the "has_openssl" variable if yassl or polarssl is found as they will simply not work as 100% drop-in replacements for some of the stuff the "OpenSSL" feature is used for. I spotted this problem when doing test runs with PolarSSL builds.
2012-04-01HTTP: reset expected DL/UL sizes on redirectsDaniel Stenberg
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the download size was known (like with a Content-Length header), but the subsequent URL (transfered after the 3xx page) was chunked encoded, then the previous "known download size" would linger and cause the progress meter to get incorrect information, ie the former value would remain being sent in. This could easily result in downloads that were WAY larger than "expected" and would cause >100% outputs with the curl command line tool. Test case 599 was created and it was used to repeat the bug and then verify the fix. Bug: http://curl.haxx.se/bug/view.cgi?id=3510057 Reported by: Michael Wallner
2012-03-26test #1405: support HTTP disabled buildsYang Tse
2012-03-26test #809: Updated error code to match recent pop3 changesSteve Holme
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 08:33:24 +0000