aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2020-05-14checksrc: enhance the ASTERISKSPACE and update code accordinglyDaniel Stenberg
Fine: "struct hello *world" Not fine: "struct hello* world" (and variations) Closes #5386
2020-05-13docs/options-in-versions: which version added each cmdline optionDaniel Stenberg
Added test 971 to verify that the list is in sync with the files in cmdline-opts. The check also verifies that .d-files that uses Added: specify the same version number as the options-in-versions file does. Closes #5381
2020-05-12tool: Add option --retry-all-errors to retry on any errorJay Satiro
The "sledgehammer" of retrying. Closes https://github.com/curl/curl/pull/5185
2020-05-12CMake: fix runtests.pl with CMake, add new test targetsPeter Wu
* runtests.pl: - Fix out-of-tree build under CMake when srcdir is not set. Default srcdir to the location of runtests.pl. - Add a hack to allow CMake to use the TFLAGS option as documented in tests/README and used in scripts/travis/script.sh. * Bump CMake version to 3.2 for USES_TERMINAL, dropping Debian Jessie support (no one should care, it is already EOL.). * Remove CTest since it defines its own 'test' target with no tests since all unittests are already broken and not built by default. * Add new test targets based on the options from Makefile.am. Since new test targets are rarely added, I opted for duplicating the runtests.pl options as opposed to creating a new Makefile.inc file. Use top-level target names (test-x) instead of x-test since that is used by CI and others. Closes #5358
2020-05-12CMake: do not build test programs by defaultPeter Wu
The default target should only build libcurl and curl. Add a dedicated 'testdeps' target which will be used later when running tests. Note that unittests are currently broken in CMake and already excluded. Closes #5368
2020-05-12FILEFORMAT: moved up the variables section and further polishedDaniel Stenberg
2020-05-12runtests: remove ftp2 support, not usedDaniel Stenberg
We once supported two separate ftp instances in the test suite. Has not been used the last decade. Closes #5375
2020-05-11test1238: avoid tftpd being busy for tests shortly followingMarc Hoersken
The tftpd server may still be busy if the total timeout of 25 seconds has not been reached or no sread error was received during or after the execution of the timeout test 1238. Once the next TFTP test comes around (eg. 1242 or 1243), those will fail because the tftpd server is still waiting on data from curl due to the UDP protocol being stateless and having no connection close. On Linux this error may not happen, because ICMP errors generated due to a swrite error can also be returned async on the next sread call instead. Therefore we will now just kill the tftpd server after test 1238 to make sure that the following tests are not affected. This enables us to no longer ignore tests 1242, 1243, 2002 and 2003 on the CI platforms CirrusCI and AppVeyor. Assisted-by: Peter Wu Closes #5364
2020-05-10tests/server/tftpd.c: fix include and enhance debug loggingMarc Hoersken
setjmp.h should only be included if HAVE_SETJMP_H is defined. Add additional log statements to see wether reads and writes are blocking or finishing before an alarm signal is received. Assisted-by: Peter Wu Part of #5364
2020-05-08urlapi: accept :: as a valid IPv6 addressDaniel Stenberg
Text 1560 is extended to verify. Reported-by: Pavel Volgarev Fixes #5344 Closes #5351
2020-05-07runtests: show elapsed test time with higher precision (ms)Daniel Stenberg
2020-05-06test613.pl: make tests 613 and 614 work with OpenSSH for WindowsMarc Hoersken
OpenSSH for Windows shows group and other/world permissions as *, because those concepts do not exist on Windows. It also does not show the current or parent directory, so we just ignore those. Reviewed-by: Daniel Stenberg Closes #5328
2020-05-06runtests: set +x mode againDaniel Stenberg
2020-05-04dynbuf: introduce internal generic dynamic buffer functionsDaniel Stenberg
A common set of functions instead of many separate implementations for creating buffers that can grow when appending data to them. Existing functionality has been ported over. In my early basic testing, the total number of allocations seem at roughly the same amount as before, possibly a few less. See docs/DYNBUF.md for a description of the API. Closes #5300
2020-05-03runtests: remove sleep callsDaniel Stenberg
Remove many one second sleeps that were done *after* each newly started test server already has been verified. They should not have any purpose there. Closes #5323
2020-05-02sockfilt: make select_ws stop waiting on exit signal eventMarc Hoersken
This makes sure that select_ws behaves similar to real select which stops waiting on a signal handler being triggered. This makes it possible to gracefully stop sockfilt.exe on Windows with taskkill /IM sockfilt.exe (without /F force flag). Reviewed-by: Jay Satiro Part of #5260
2020-05-02tests/server/util.[ch]: add exit event to stop waiting on WindowsMarc Hoersken
This commit adds a global exit event to the test servers that Windows-specific wait routines can use to get triggered if the program was signaled to be terminated, eg. select_ws in sockfilt.c The exit event will be managed by the signal handling code and is set to not reset automatically to support multiple wait routines. Reviewed-by: Jay Satiro Closes #5260
2020-05-02tests/server/util.c: fix thread handle not being closedMarc Hoersken
Reviewed-by: Jay Satiro Part of #5260
2020-05-02tests/server/util.c: use raise instead of calling signal handlerMarc Hoersken
Use raise to trigger signal handler instead of calling it directly and causing potential unexpected control flow. Reviewed-by: Jay Satiro Part of #5260
2020-05-02tests: add support for SSH server variant specific transfer pathsMarc Hoersken
OpenSSH for Windows requires paths in the format of /C:/ instead of the pseudo-POSIX paths /cygdrive/c/ or just /c/ Reviewed-by: Daniel Stenberg Closes #5298
2020-05-02runtests: make the logmsg from the ssh server only show in verboseDaniel Stenberg
2020-05-02tests: make test 1248 + 1249 use %NOLISTENPORTDaniel Stenberg
... instead of a port of a non-running server so that it works stand-alone. Closes #5318
2020-04-30runtests: fix typo in the existence of disabled tests checkerEmil Engler
Closes #5316
2020-04-30test75: Remove precheck testDan Fandrich
This has not been needed since commit 9fa42bed and often prevents it from running at all with dynamic test ports.
2020-04-30tests: Stop referring to server ports when they're not usedDan Fandrich
Several tests referred to specific server ports even when the test didn't actually use that server or specify that it's needed. In such cases, the test harness substitutes the text "[not running]" as the port number which causes many such tests to fail due to the inability to parse the URL. These tests are changed to use %NOLISTENPORT which will always be substituted correctly.
2020-04-30conncache: various concept cleanupsDaniel Stenberg
More connection cache accesses are protected by locks. CONNCACHE_* is a beter prefix for the connection cache lock macros. Curl_attach_connnection: now called as soon as there's a connection struct available and before the connection is added to the connection cache. Curl_disconnect: now assumes that the connection is already removed from the connection cache. Ref: #4915 Closes #5009
2020-04-30tests: tests: run stunnel for HTTPS and FTPS on dynamic portsDaniel Stenberg
As stunnel is an external tool and it has no specific option to export the actually used port number when asked to listen to 0, runtests instead iterates over ten randomly picked high number ports and sticks to the first one stunnel can listen to. Closes #5267
2020-04-30tests: pick a random port number for SSHDaniel Stenberg
Since sshd doesn't have such an option by itself, we iterate over a series of random ports until one works. Closes #5273
2020-04-30libtest/cmake: Remove commented codeRikard Falkeborn
These were commented out in e9dd0998706a when Makefile.inc was included instead. 11 years have passed since then and the commented code is of course very outdated. Remove it to avoid confusion. Closes #5311
2020-04-29test1177: look for curl.h in source directoryKamil Dudka
If we use a separate build directory, there is no copy of the header. Closes #5310
2020-04-29tests: look for preprocessed tests in build directoryKamil Dudka
... which is not always the same directory as source directory Closes #5310
2020-04-28headers: copyright range fixDaniel Stenberg
2020-04-28doh: Constify some input pointersRikard Falkeborn
Closes #5306
2020-04-25runtests: check for the disabled tests relative srcdirDaniel Stenberg
To make it work correctly for out-of-tree builds. Follow-up to 75e8feb6fb08b Bug: https://github.com/curl/curl/pull/5288#issuecomment-619346389 Reported-by: Marcel Raad Closes #5297
2020-04-25runtests: revert commenting out a line I did for debuggingDaniel Stenberg
Follow-up to 11091cd4d. It was not meant to be pushed!
2020-04-25runtests: when <killserver> mentions http, kill http/2 tooDaniel Stenberg
Since the http2 test server is a mere proxy that needs to know about the dynamic port the HTTP server is using, it too needs to get restarted when the http server is killed. A regression caused by 80d6515. Fixes #5289 Closes #5291
2020-04-24tests/git: ignore mqttd and port filesEmil Engler
Closes #5290
2020-04-24tests: make runtests check that disabled tests existsDaniel Stenberg
... and error out if so. Removed '536' from DISABLED as there is no such test file. Closes #5288
2020-04-24test1154: set a proper nameDaniel Stenberg
2020-04-22transfer: Switch PUT to GET/HEAD on 303 redirectJay Satiro
Prior to this change if there was a 303 reply to a PUT request then the subsequent request to respond to that redirect would also be a PUT. It was determined that was most likely incorrect based on the language of the RFCs. Basically 303 means "see other" resource, which implies it is most likely not the same resource, therefore we should not try to PUT to that different resource. Refer to the discussions in #5237 and #5248 for more information. Fixes https://github.com/curl/curl/issues/5237 Closes https://github.com/curl/curl/pull/5248
2020-04-20tests: run the RTSP test server on a dynamic port numberDaniel Stenberg
To avoid port collisions. Closes #5272
2020-04-20tests: add %NOLISTENPORT and use itDaniel Stenberg
The purpose with this variable is to provide a port number that is reasonably likely to not have a listener on the local host so that tests can try connect failures against it. It uses port 47 - "reserved" according to IANA. Updated six tests to use it instead of the previous different ports. Assisted-by: Emil Engler Closes #5270
2020-04-20server/tftpd: fix compiler warningDaniel Stenberg
Follow-up from 369ce38ac1d Reported-by: Marc Hörsken
2020-04-20tests: run the SOCKS test server on a dynamic port numberDaniel Stenberg
Closes #5266
2020-04-20tests: run the TFTP test server on a dynamic port numberDaniel Stenberg
Picking a dynamic unused port is better than a fixed to avoid the collision risk. Closes #5265
2020-04-20mqtt: improve the state machineDaniel Stenberg
To handle PUBLISH before SUBACK and more. Updated the existing tests and added three new ones. Reported-by: Christoph Krey Bug: https://curl.haxx.se/mail/lib-2020-04/0021.html Closes #5246
2020-04-20runtests: always put test number in servercmd fileDaniel Stenberg
2020-04-20ensure all references to ports are replaced by varsxquery
2020-04-20add more alt-svc test coveragexquery
2020-04-20test1247: use http server to get the port number setDaniel Stenberg
Follow-up to 0f5db7b263f
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:42:11 +0000