aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2020-01-03tests: Fix bounce requests with truncated writesMarc Aldorasi
Prior to this change the swsbounce check in service_connection could fail because prevtestno and prevpartno were not set, which would cause the wrong response data to be sent to some tests and cause them to fail. Ref: https://github.com/curl/curl/pull/4717#issuecomment-570240785
2019-12-31tests: Change NTLM tests to require SSLJay Satiro
Prior to this change tests that required NTLM feature did not require SSL feature. There are pending changes to cmake builds that will allow enabling NTLM in non-SSL builds in Windows. In that case the NTLM auth strings created are different from what is expected by the NTLM tests and they fail: "The issue with NTLM is that previous non-SSL builds would not enable NTLM and so the NTLM tests would be skipped." Assisted-by: marc-groundctl@users.noreply.github.com Ref: https://github.com/curl/curl/pull/4717#issuecomment-566218729 Closes https://github.com/curl/curl/pull/4768
2019-12-19sws: search for "Testno:" header uncondtionally if no testnoDaniel Stenberg
Even if the initial request line wasn't found. With the fix to 1455, the test number is now detected correctly. (Problem found when running tests in random order.) Closes #4744
2019-12-19tests: set LC_ALL in more testsDaniel Stenberg
Follow-up to 23208e330ac0c21 Closes #4743
2019-12-19test165: set LC_ALL=en_US.UTF-8 tooDaniel Stenberg
On my current Debian Unstable with libidn2 2.2.0, I get an error if LC_ALL is set to blank. Then curl errors out with: curl: (3) Failed to convert www.åäö.se to ACE; could not convert string to UTF-8 Closes #4738
2019-12-19test1456: remove the use of a fixed local portDaniel Stenberg
Fixup the test to instead not compare the port number. It sometimes caused problems like this: "curl: (45) bind failed with errno 98: Address already in use" Closes #4733
2019-12-18test1270: a basic -w redirect_url testDaniel Stenberg
Closes #4728
2019-12-16tests: make sure checksrc runs on header files tooDaniel Stenberg
2019-12-15lib1591: free memory properly on OOM, in the trailers callbackDaniel Stenberg
Detected by torture tests. Closes #4720
2019-12-15runtests: --repeat=[num] to repeat testsDaniel Stenberg
Closes #4715
2019-12-13tests: use DoH feature for DoH testsMarcel Raad
Previously, http/2 was used instead. Assisted-by: Jay Satiro Closes https://github.com/curl/curl/pull/4692
2019-12-13tests: fix build with `CURL_DISABLE_DOH`Marcel Raad
Closes https://github.com/curl/curl/pull/4692
2019-12-13unit1620: fix bad free in OOMDaniel Stenberg
Closes #4709
2019-12-13unit1609: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13unit1607: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13lib1559: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13lib1557: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-11runtests: introduce --shallow to reduce huge torture testsDaniel Stenberg
When set, shallow mode limits runtests -t to make no more than NUM fails per test case. If more are found, it will randomly discard entries until the number is right. The random seed can also be set. This is particularly useful when running MANY tests as then most torture failures will already fail the same functions over and over and make the total operation painfully tedious. Closes #4699
2019-12-09tests: make it possible to set executable extensionsMarc Hoersken
This enables the use of Windows Subsystem for Linux (WSL) to run the testsuite against Windows binaries while using Linux servers. This commit introduces the following environment variables: - CURL_TEST_EXE_EXT: set the executable extension for all components - CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only - CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only Later testcurl.pl could be adjusted to make use of those variables. - CURL_TEST_EXE_EXT_SRV: set it for the test servers only (This is one of several commits to support use of WSL for the tests.) Closes https://github.com/curl/curl/pull/3899
2019-12-09tests: fix permissions of ssh keys in WSLMarc Hoersken
Keys created on Windows Subsystem for Linux (WSL) require it for some reason. (This is one of several commits to support use of WSL for the tests.) Ref: https://github.com/curl/curl/pull/3899
2019-12-09tests: use \r\n for log messages in WSLMarc Hoersken
Bash in Windows Subsystem for Linux (WSL) requires it for some reason. (This is one of several commits to support use of WSL for the tests.) Ref: https://github.com/curl/curl/pull/3899
2019-12-09conncache: fix multi-thread use of shared connection cacheDaniel Stenberg
It could accidentally let the connection get used by more than one thread, leading to double-free and more. Reported-by: Christopher Reid Fixes #4544 Closes #4557
2019-12-05etag: allow both --etag-compare and --etag-save in same cmdlineDaniel Stenberg
Fixes #4669 Closes #4678
2019-12-05test342: make it return a 304 as the tag matchesDaniel Stenberg
2019-12-03curl_setup: disable IPv6 resolver without `getaddrinfo`Marcel Raad
Also, use `CURLRES_IPV6` only for actual DNS resolution, not for IPv6 address support. This makes it possible to connect to IPv6 literals by setting `ENABLE_IPV6` even without `getaddrinfo` support. It also fixes the CMake build when using the synchronous resolver without `getaddrinfo` support. Closes https://github.com/curl/curl/pull/4662
2019-12-01build: Disable Visual Studio warning "conditional expression is constant"Jay Satiro
- Disable warning C4127 "conditional expression is constant" globally in curl_setup.h for when building with Microsoft's compiler. This mainly affects building with the Visual Studio project files found in the projects dir. Prior to this change the cmake and winbuild build systems already disabled 4127 globally for when building with Microsoft's compiler. Also, 4127 was already disabled for all build systems in the limited circumstance of the WHILE_FALSE macro which disabled the warning specifically for while(0). This commit removes the WHILE_FALSE macro and all other cruft in favor of disabling globally in curl_setup. Background: We have various macros that cause 0 or 1 to be evaluated, which would cause warning C4127 in Visual Studio. For example this causes it: #define Curl_resolver_asynch() 1 Full behavior is not clearly defined and inconsistent across versions. However it is documented that since VS 2015 Update 3 Microsoft has addressed this somewhat but not entirely, not warning on while(true) for example. Prior to this change some C4127 warnings occurred when I built with Visual Studio using the generated projects in the projects dir. Closes https://github.com/curl/curl/pull/4658
2019-11-28curl: two new command line options for etagsMaros Priputen
--etag-compare and --etag-save Suggested-by: Paul Hoffman Fixes #4277 Closes #4543
2019-11-26dist: add error-codes.plMarcel Raad
Follow-up to commit 74f441c6d31. This should fix test 1175 when run via the daily source tarballs. Closes https://github.com/curl/curl/pull/4638
2019-11-25multi: add curl_multi_wakeup()Gergely Nagy
This commit adds curl_multi_wakeup() which was previously in the TODO list under the curl_multi_unblock name. On some platforms and with some configurations this feature might not be available or can fail, in these cases a new error code (CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup(). Fixes #4418 Closes #4608
2019-11-22test1175: verify symbols-in-versions and libcurl-errors.3 in syncDaniel Stenberg
Closes #4628
2019-11-21include: make CURLE_HTTP3 use a new error codeDaniel Stenberg
To avoid potential issues with error code reuse. Reported-by: Christoph M. Becker Assisted-by: Dan Fandrich Fixes #4601 Closes #4627
2019-11-16doh: improced both encoding and decodingNiall
Improved estimation of expected_len and updated related comments; increased strictness of QNAME-encoding, adding error detection for empty labels and names longer than the overall limit; avoided treating DNAME as unexpected; updated unit test 1655 with more thorough set of proofs and tests Closes #4598
2019-11-14curl: fix -T globbingDaniel Stenberg
Regression from e59371a4936f8 (7.67.0) Added test 490, 491 and 492 to verify the functionality. Reported-by: Kamil Dudka Reported-by: Anderson Sasaki Fixes #4588 Closes #4591
2019-11-12quiche: reject headers in the wrong orderDaniel Stenberg
Pseudo header MUST come before regular headers or cause an error. Reported-by: Cynthia Coan Fixes #4571 Closes #4584
2019-11-12CURL-DISABLE: initial docs for the CURL_DISABLE_* definesDaniel Stenberg
The disable-scan script used in test 1165 is extended to also verify that the docs cover all used defines and all defines offered by configure. Reported-by: SLDiggie on github Fixes #4545 Closes #4587
2019-11-10test1558: use double slash after file:Marcel Raad
Classic MinGW / MSYS 1 doesn't support `MSYS2_ARG_CONV_EXCL`, so this test unnecessarily failed when using `file:/` instead of `file:///`. Closes https://github.com/curl/curl/pull/4554
2019-11-09strerror: Fix an error looking up some Windows error stringsJay Satiro
- Use FORMAT_MESSAGE_IGNORE_INSERTS to ignore format specifiers in Windows error strings. Since we are not in control of the error code we don't know what information may be needed by the error string's format specifiers. Prior to this change Windows API error strings which contain specifiers (think specifiers like similar to printf specifiers) would not be shown. The FormatMessage Windows API call which turns a Windows error code into a string could fail and set error ERROR_INVALID_PARAMETER if that error string contained a format specifier. FormatMessage expects a va_list for the specifiers, unless inserts are ignored in which case no substitution is attempted. Ref: https://devblogs.microsoft.com/oldnewthing/20071128-00/?p=24353
2019-11-08test1560: require IPv6 for IPv6 aware URL parsingDaniel Stenberg
The URL parser function can't reject a bad IPv6 address properly when curl was built without IPv6 support. Reported-by: Marcel Raad Fixes #4556 Closes #4572
2019-11-02certs/Server-localhost-lastSAN-sv: regenerate with sha256Marcel Raad
All other certificates were regenerated in commit ba782baac30, but this one was missed. Fixes test3001 on modern systems. Closes https://github.com/curl/curl/pull/4551
2019-11-02copyrights: update all copyright notices to 2019 on files changed this yearVilhelm Prytz
Closes #4547
2019-10-30url: make Curl_close() NULLify the pointer tooDaniel Stenberg
This is the common pattern used in the code and by a unified approach we avoid mistakes. Closes #4534
2019-10-24test1591: fix spelling of http featureMarcel Raad
The test never got run because the feature name is `http` in lowercase. Closes https://github.com/curl/curl/pull/4520
2019-10-23conn-reuse: requests wanting NTLM can reuse non-NTLM connectionsDaniel Stenberg
Added test case 338 to verify. Reported-by: Daniel Silverstone Fixes #4499 Closes #4514
2019-10-23tests: add missing proxy featuresMarcel Raad
2019-10-21tests: use %FILE_PWD for file:// URLsMarcel Raad
This way, we always have exactly one slash after the host name, making the tests pass when curl is compiled with the MSYS GCC. Closes https://github.com/curl/curl/pull/4512
2019-10-21tests: add `connect to non-listen` keywordsMarcel Raad
These tests try to connect to ports nothing is listening on. Closes https://github.com/curl/curl/pull/4511
2019-10-20runtests: get textaware info from curl instead of perlMarcel Raad
The MSYS system on Windows can run the test suite for curl built with any toolset. When built with the MSYS GCC, curl uses Unix line endings, while it uses Windows line endings when built with the MinGW GCC, and `^O` reports 'msys' in both cases. Use the curl executable itself to determine the line endings instead, which reports 'x86_64-pc-msys' when built with the MSYS GCC. Closes https://github.com/curl/curl/pull/4506
2019-10-17test1162: disable MSYS2's POSIX path conversionMarcel Raad
This avoids MSYS2 converting the backslasb in the URL to a slash, causing the test to fail.
2019-10-16url: normalize CURLINFO_EFFECTIVE_URLDaniel Stenberg
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as input in most cases, which made it not get a scheme prefixed like before if the URL was given without one, and it didn't remove dotdot sequences etc. Added test case 1907 to verify that this now works as intended and as before 7.62.0. Regression introduced in 7.62.0 Reported-by: Christophe Dervieux Fixes #4491 Closes #4493
2019-10-16tests: line ending fixes for WindowsMarcel Raad
Mark some files as text. Closes https://github.com/curl/curl/pull/4490
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 07:06:41 +0000