aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2020-04-29tests: look for preprocessed tests in build directoryKamil Dudka
... which is not always the same directory as source directory Closes #5310
2020-04-28headers: copyright range fixDaniel Stenberg
2020-04-28doh: Constify some input pointersRikard Falkeborn
Closes #5306
2020-04-25runtests: check for the disabled tests relative srcdirDaniel Stenberg
To make it work correctly for out-of-tree builds. Follow-up to 75e8feb6fb08b Bug: https://github.com/curl/curl/pull/5288#issuecomment-619346389 Reported-by: Marcel Raad Closes #5297
2020-04-25runtests: revert commenting out a line I did for debuggingDaniel Stenberg
Follow-up to 11091cd4d. It was not meant to be pushed!
2020-04-25runtests: when <killserver> mentions http, kill http/2 tooDaniel Stenberg
Since the http2 test server is a mere proxy that needs to know about the dynamic port the HTTP server is using, it too needs to get restarted when the http server is killed. A regression caused by 80d6515. Fixes #5289 Closes #5291
2020-04-24tests/git: ignore mqttd and port filesEmil Engler
Closes #5290
2020-04-24tests: make runtests check that disabled tests existsDaniel Stenberg
... and error out if so. Removed '536' from DISABLED as there is no such test file. Closes #5288
2020-04-24test1154: set a proper nameDaniel Stenberg
2020-04-22transfer: Switch PUT to GET/HEAD on 303 redirectJay Satiro
Prior to this change if there was a 303 reply to a PUT request then the subsequent request to respond to that redirect would also be a PUT. It was determined that was most likely incorrect based on the language of the RFCs. Basically 303 means "see other" resource, which implies it is most likely not the same resource, therefore we should not try to PUT to that different resource. Refer to the discussions in #5237 and #5248 for more information. Fixes https://github.com/curl/curl/issues/5237 Closes https://github.com/curl/curl/pull/5248
2020-04-20tests: run the RTSP test server on a dynamic port numberDaniel Stenberg
To avoid port collisions. Closes #5272
2020-04-20tests: add %NOLISTENPORT and use itDaniel Stenberg
The purpose with this variable is to provide a port number that is reasonably likely to not have a listener on the local host so that tests can try connect failures against it. It uses port 47 - "reserved" according to IANA. Updated six tests to use it instead of the previous different ports. Assisted-by: Emil Engler Closes #5270
2020-04-20server/tftpd: fix compiler warningDaniel Stenberg
Follow-up from 369ce38ac1d Reported-by: Marc Hörsken
2020-04-20tests: run the SOCKS test server on a dynamic port numberDaniel Stenberg
Closes #5266
2020-04-20tests: run the TFTP test server on a dynamic port numberDaniel Stenberg
Picking a dynamic unused port is better than a fixed to avoid the collision risk. Closes #5265
2020-04-20mqtt: improve the state machineDaniel Stenberg
To handle PUBLISH before SUBACK and more. Updated the existing tests and added three new ones. Reported-by: Christoph Krey Bug: https://curl.haxx.se/mail/lib-2020-04/0021.html Closes #5246
2020-04-20runtests: always put test number in servercmd fileDaniel Stenberg
2020-04-20ensure all references to ports are replaced by varsxquery
2020-04-20add more alt-svc test coveragexquery
2020-04-20test1247: use http server to get the port number setDaniel Stenberg
Follow-up to 0f5db7b263f
2020-04-19runtests: use a unix domain socket path with the pid in the nameDaniel Stenberg
To make it impossible for test cases to access the file name without using the proper variable for the purpose. Closes #5264
2020-04-19src: Remove C99 constructs to ensure C89 complianceTom
This fixes the error: 'for' loop initial declaration used outside C99 mode by declaring the loop increment variable in the beginning of the block instead of inside the for loop. Fixes #5254 Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
2020-04-19runtests: dummy init the ports variables to avoid warningsDaniel Stenberg
... and generate something that can help debug test cases.
2020-04-19mime: properly check Content-Type even if it has parametersPatrick Monnerat
New test 669 checks this fix is effective. Fixes #5256 Closes #5258 Reported-by: thanhchungbtc on github
2020-04-19tests/FILEFORMAT: converted to markdown and extendedDaniel Stenberg
Closes #5261
2020-04-18test1245: make it work with dynamic FTP server portDaniel Stenberg
2020-04-18test1055: make it work with dynamic FTP portDaniel Stenberg
2020-04-18test1028: make it run on dynamic FTP server portDaniel Stenberg
2020-04-18tests: move pingpong server to dynamic listening portDaniel Stenberg
FTP, IMAP, POP3, SMTP and their IPv6 versions are now all on dynamic ports Test 842-845 are unfortunately a bit hard to move over to this concept right now and require "default port" still...
2020-04-18test1056: work with dynamic HTTP ipv6 portDaniel Stenberg
2020-04-18test1448: work with dynamic HTTP server portDaniel Stenberg
2020-04-18tests: introduce preprocessed test casesDaniel Stenberg
The runtests script now always performs variable replacement on the entire test source file before the test gets executed, and saves the updated version in a temporary file (log/test[num]) so that all test case readers/servers can use that version (if present) and thus enjoy the powers of test case variable substitution. This is necessary to allow complete port number freedom. Test 309 is updated to work with a non-fixed port number thanks to this.
2020-04-18tests: make 2006-2010 handle different port number lengthsDaniel Stenberg
2020-04-18tests: run the sws server on "any port"Daniel Stenberg
Makes the test servers for HTTP and Gopher pop up on a currently unused port and runtests adapts to that! Closes #5247
2020-04-18sockfilt: tidy variable naming and data structure in select_wsMarc Hoersken
This commit does not introduce any logical changes to the code. Reviewed-by: Jay Satiro and Marcel Raad Closes #5238
2020-04-16mqttd: s/errno/SOCKERRNODaniel Stenberg
To behave proper on Windows Reported-by: Gisle Vanem Bug: https://github.com/curl/curl/commit/5e855bbd18f84a02c951be7cac6188276818cdac#r38507132 Closes #5241
2020-04-15copyright: bump the copyright year rangeDaniel Stenberg
2020-04-14test2043: use revoked.badssl.com instead of revoked.grc.comMarc Hoersken
The certificate of revoked.grc.com has expired on 2020-04-13. Reviewed-by: Jay Satiro Closes #5233
2020-04-14sockfilt: fix broken pipe on Windows to be ready in select_wsMarc Hoersken
Closes #5228
2020-04-14tests: add four MQTT tests 1190 - 1193Daniel Stenberg
2020-04-14tests: add the mqtt test server mqttdDaniel Stenberg
2020-04-14tests: support hex encoded data and mqtt serverDaniel Stenberg
The mqtt server is started using a "random" port.
2020-04-13test1908: avoid using fixed port number in test dataDaniel Stenberg
Closes #5225
2020-04-12tests/server: add hidden window to gracefully handle WM_CLOSEMarc Hoersken
Forward Window events as signals to existing signal event handler.
2020-04-12tests/server: add CTRL event handler for Win32 consolesMarc Hoersken
Forward CTRL events as signals to existing signal event handler.
2020-04-12tests/server: move all signal handling routines to util.[ch]Marc Hoersken
Avoid code duplication to prepare for portability enhancements.
2020-04-11tests/server/util.c: use curl_off_t instead of long for pidMarc Hoersken
Avoid potential overflow of huge PIDs on Windows. Related to #5188 Assisted-by: Marcel Raad
2020-04-11tests: use Cygwin/msys PIDs for stunnel and sshd on WindowsMarc Hoersken
Since the Windows versions of both programs would write Windows PIDs to their pidfiles which we cannot handle, we need to use our known perl.exe Cygwin/msys PID together with exec() in order to tie the spawned processes to the existance of our perl.exe The perl.exe that is executing secureserver.pl and sshserver.pl has a Cygwin/msys PID, because it is started inside Cygwin/msys. Related to #5188
2020-04-11tests: add Windows compatible pidwait like pidkill and pidtermMarc Hoersken
Related to #5188
2020-04-11tests: fix conflict between Cygwin/msys and Windows PIDsMarc Hoersken
Add 65536 to Windows PIDs to allow Windows specific treatment by having disjunct ranges for Cygwin/msys and Windows PIDs. See also: - https://cygwin.com/git/?p=newlib-cygwin.git;a=commit; ↵ h=b5e1003722cb14235c4f166be72c09acdffc62ea - https://cygwin.com/git/?p=newlib-cygwin.git;a=commit; ↵ h=448cf5aa4b429d5a9cebf92a0da4ab4b5b6d23fe Replaces #5178 Closes #5188
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 04:26:29 +0000