Age | Commit message (Collapse) | Author |
|
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes #2431
Closes #3669
|
|
Reproduced bug #3649
Closes #3659
|
|
This reverts commit 3773de378d48b06c09931e44dca4d274d0bfdce0.
Regression shipped in 7.64.0
Fixes #3649
|
|
To not "collide" or use up the regular curl_ name space. Also makes them
easier to detect in helper scripts.
Closes #3656
|
|
|
|
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
|
|
Test 659 verifies
Also fixed the test 658 name
Closes #3641
|
|
|
|
|
|
|
|
Follow-up to 8eddb8f4259.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes #3621
|
|
Follow-up to 180501cb02
Reported-by: Marcel Raad
Fixes #3609
Closes #3620
|
|
|
|
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes #3587
|
|
and make CONNECT_ONLY conections never reuse any existing ones either.
Reported-by: Pavel Löbl
Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html
Closes #3586
|
|
|
|
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes #3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
I missed to check this in with commit
71786c0505926aaf7e9b2477b2fb7ee16a915ec6, which only disabled the test.
This fixes the actual linker error.
Closes https://github.com/curl/curl/pull/3568
|
|
Heimdal includes on FreeBSD spewed out lots of them. Less so now.
Closes #3566
|
|
This test doesn't link without FTP support after
fc7ab4835b5fd09d0a6f57000633bb6bb6edfda1, which made Curl_fnmatch
unavailable without FTP support.
Closes https://github.com/curl/curl/pull/3565
|
|
The code is more or less copied from the stdout comparison code, maybe
some better reuse is possible.
test 1457 is adjusted to make the output actually match (by using --silent)
test 506 used <stderr> without actually needing it, so that <stderr> block is removed
Closes #3536
|
|
Option -F generates an intermediate representation of the mime structure
that is used later to create the libcurl mime structure and generate
the --libcurl statements.
Reported-by: Daniel Stenberg
Fixes #3532
Closes #3546
|
|
urlapi: turn three local-only functions into statics
conncache: make conncache_find_first_connection static
multi: make detach_connnection static
connect: make getaddressinfo static
curl_ntlm_core: make hmac_md5 static
http2: make two functions static
http: make http_setup_conn static
connect: make tcpnodelay static
tests: make UNITTEST a thing to mark functions with, so they can be static for
normal builds and non-static for unit test builds
... and mark Curl_shuffle_addr accordingly.
url: make up_free static
setopt: make vsetopt static
curl_endian: make write32_le static
rtsp: make rtsp_connisdead static
warnless: remove unused functions
memdebug: remove one unused function, made another static
|
|
- Use explicit include opt for perl calls.
Prior to this change some scripts couldn't find their dependencies.
At the top, perl is called using with the "-Isrcdir" option, and it
works:
https://github.com/curl/curl/blob/curl-7_63_0/tests/runtests.pl#L183
But on line 3868, that option is omitted. This caused problems for me,
as the symbol-scan.pl script in particular couldn't find its
dependencies properly:
https://github.com/curl/curl/blob/curl-7_63_0/tests/runtests.pl#L3868
This patch fixes that oversight by making calls to perl sub-shells
uniform.
Closes https://github.com/curl/curl/pull/3496
|
|
|
|
Since they're used purely for testing purposes, I think they should
rather be stored there.
Closes #3470
|
|
We use "conn" everywhere to be a pointer to the connection.
Introduces two functions that "attaches" and "detaches" the connection
to and from the transfer.
Going forward, we should favour using "data->conn" (since a transfer
always only has a single connection or none at all) to "conn->data"
(since a connection can have none, one or many transfers associated with
it and updating conn->data to be correct is error prone and a frequent
reason for internal issues).
Closes #3442
|
|
Attempt to reproduce issue #3444.
Closes #3447
|
|
Both user and password are cleared uncondtitionally.
Added unit test 1621 to verify.
Fixes #3423
Closes #3433
|
|
Added test 1562 to verify.
Reported-by: Jeroen Ooms
Fixes #3445
Closes #3450
|
|
[skip ci]
|
|
Closes #3417
|
|
similar to commit f508d29f3902104018
Closes #3443
|
|
Added Curl_resolver_kill() for all three resolver modes, which only
blocks when necessary, along with test 1592 to confirm
curl_multi_remove_handle() doesn't block unless it must.
Closes #3428
Fixes #3371
|
|
Closes #3426
|
|
... since it doesn't link with libcurl.
Reverts the commit dcd6f81025 changes from this file.
Bug: https://curl.haxx.se/mail/lib-2019-01/0000.html
Reported-by: Shlomi Fish
Reviewed-by: Daniel Gustafsson
Reviewed-by: Kamil Dudka
Closes #3434
|
|
MinGW-w64 defaults to targeting Windows 7 now, so GetTickCount64 is
used and the milliseconds are represented as unsigned long long,
leading to a compiler warning when implicitly converting them to long.
|
|
NTLM2 did not work i.e. no NTLMv2 response was created. Changing the
check seems to work.
Ref: https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-NLMP/[MS-NLMP].pdf
Fixes https://github.com/curl/curl/issues/3286
Closes https://github.com/curl/curl/pull/3287
Closes https://github.com/curl/curl/pull/3415
|
|
The previous fix for parsing IPv6 URLs with a zone index was a paddle
short for URLs without an explicit port. This patch fixes that case
and adds a unit test case.
This bug was highlighted by issue #3408, and while it's not the full
fix for the problem there it is an isolated bug that should be fixed
regardless.
Closes #3411
Reported-by: GitYuanQu on github
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are
try-last so any non-wildcard entry is resolved first. If specified,
any host not matched by another CURLOPT_RESOLVE config will use this
as fallback.
Example send a.com to 10.0.0.1 and everything else to 10.0.0.2:
curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \
https://a.com https://b.com
This is probably quite similar to using:
--connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443
Closes #3406
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose.
For now, both the tool and library allow HTTP/0.9 by default.
docs/DEPRECATE.md lays out the plan for when to reverse that default: 6
months after the 7.64.0 release. The options are added already now so
that applications/scripts can start using them already now.
Fixes #2873
Closes #3383
|
|
Ensure to perform the checks we have to enforce a sane domain in
the cookie request. The check for non-PSL enabled builds is quite
basic but it's better than nothing.
Closes #2964
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
|
|
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION
options that allow a callback based approach to sending trailing headers
with chunked transfers.
The test server (sws) was updated to take into account the detection of the
end of transfer in the case of trailing headers presence.
Test 1591 checks that trailing headers can be sent using libcurl.
Closes #3350
|
|
This verify that the `?' in the selector is kept as is.
Verifies the fix in #3370
|
|
Only allow secure origins to be able to write cookies with the
'secure' flag set. This reduces the risk of non-secure origins
to influence the state of secure origins. This implements IETF
Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates
RFC6265.
Closes #2956
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
A URL with a single colon without a portnumber should use the default
port, discarding the colon. Fix, add a testcase and also do little bit
of comment wordsmithing.
Closes #3365
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
|
|
... when not actually following the redirect. Otherwise we return error
for this and an application can't extract the value.
Test 1518 added to verify.
Reported-by: Pavel Pavlov
Fixes #3340
Closes #3364
|
|
This adds a new unittest intended to cover the internal functions in
the urlapi code, starting with parse_port(). In order to avoid name
collisions in debug builds, parse_port() is renamed Curl_parse_port()
since it will be exported.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
|