aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2013-05-02tests: Corrected typo in test909Steve Holme
Introduced in commit: 514817669e9e
2013-05-02tests: Corrected test909 to be RFC2821 compliantSteve Holme
2013-05-02tests: Updated test references to 909 from 1411Steve Holme
...and removed references to libcurl and test1406.
2013-05-02tests: Renamed test1411 to test909 as this is a main SMTP testSteve Holme
2013-04-29ftpserver: silence warningsDaniel Stenberg
Fix regressions in commit b56e3d43e5d. Make @data local and filter off non-numerical digits from $testno in STATUS_imap.
2013-04-29ftpserver.pl: Corrected the imap LOGIN responseSteve Holme
...to be more realistic and consistent with the other imap responses.
2013-04-29tests: Added imap STATUS command testSteve Holme
2013-04-28tests: Corrected the SMTP tests to be RFC2821 compliantSteve Holme
The emails that are sent to the server during these tests were incorrectly formatted as they contained one or more LF terminated lines rather than being CRLF terminated as per Section 2.3.7 of RFC-2821. This wasn't a problem for the test suite as the <stdin> data matched the <upload> data but anyone using these tests as reference would be sending incorrect data to a server.
2013-04-27tests: Corrected command line arguments in test907 and test908Steve Holme
2013-04-27tests: Added SMTP AUTH with initial response testsSteve Holme
2013-04-27tests: Updated SMTP tests to decouple client initial responseSteve Holme
Updated test903 and test904 following the addition of CURLOPT_SASL_IR as the default behaviour of SMTP AUTH responses is now to not include the initial response. New tests with --sasl-ir support to follow.
2013-04-26ftpserver.pl: Fixed imap logout confirmation dataSteve Holme
An IMAP server should response with the BYE continuation response before confirming the LOGOUT command was successful.
2013-04-26ftp_state_pasv_resp: connect through proxy also when set by envDaniel Stenberg
When connecting back to an FTP server after having sent PASV/EPSV, libcurl sometimes didn't use the proxy properly even though the proxy was used for the initial connect. The function wrongly checked for the CURLOPT_PROXY variable to be set, which made it act wrongly if the proxy information was set with an environment variable. Added test case 711 to verify (based on 707 which uses --socks5). Also added test712 to verify another variation of setting the proxy: with --proxy socks5:// Bug: http://curl.haxx.se/bug/view.cgi?id=1218 Reported-by: Zekun Ni
2013-04-25test709: clarify the test in the nameDaniel Stenberg
2013-04-25sshserver: disable StrictHostKeyCheckingDaniel Stenberg
I couldn't figure out why the host key logic isn't working, but having it set to yes prevents my SSH-based test cases to run. I also don't see a strong need to use strict host key checking on this test server. So I disabled it.
2013-04-25runtests: log more commands in verbose modeDaniel Stenberg
... to aid tracking down failures
2013-04-22tests: add test1511 to check timecond clean-upAlessandro Ghedini
Verifies the timecond fix in commit c49ed0b6c0f
2013-04-18Add tests/http_pipe.py to the tarball buildLinus Nielsen Feltzing
2013-04-15Add extra libs for lib1900 and lib2033 test programsPaul Howarth
These are needed in cases where clock_gettime is used, from librt.
2013-04-12FTP: handle a 230 welcome responseDaniel Stenberg
...instead of the 220 we otherwise expect. Made the ftpserver.pl support sending a custom "welcome" and then created test 1219 to verify this fix with such a 230 welcome. Bug: http://curl.haxx.se/mail/lib-2013-02/0102.html Reported by: Anders Havn
2013-04-12FTP: access files in root dir correctlyDaniel Stenberg
Accessing a file with an absolute path in the root dir but with no directory specified was not handled correctly. This fix comes with four new test cases that verify it. Bug: http://curl.haxx.se/mail/lib-2013-04/0142.html Reported by: Sam Deane
2013-04-12tests: prevent test206, test1060, and test1061 from failingKamil Dudka
... in case runtests.pl is invoked with non-default -b option Fixes a regression caused by 1e29d275c643ef6aab7948f0f55a7a9397e56b42.
2013-04-11test1218: another cookie tailmatch testDaniel Stenberg
... and make 1216 also verify it with a file input These tests verify commit 3604fde3d3c9b0d, the fix for the "cookie domain tailmatch" vulnerability. See http://curl.haxx.se/docs/adv_20130412.html
2013-04-09test1217: verify parsing 257 responses with "rubbish" before pathDaniel Stenberg
Test 1217 verifies commit e0fb2d86c9f78, and without that change this test fails.
2013-04-09test1216: test tailmatching cookie domainsDaniel Stenberg
This test is an attempt to repeat the problem YAMADA Yasuharu reported at http://curl.haxx.se/mail/lib-2013-04/0108.html
2013-04-08proxy: make ConnectionExists() check credential of proxyconnections tooFabian Keil
Previously it only compared credentials if the requested needle connection wasn't using a proxy. This caused NTLM authentication failures when using proxies as the authentication code wasn't send on the connection where the challenge arrived. Added test 1215 to verify: NTLM server authentication through a proxy (This is a modified copy of test 67)
2013-04-07Revert "getpart.pm: Strip carriage returns to fix Windows support"Marc Hoersken
This reverts commit e51b23c925a2721cf7c29b2b376d3d8903cfb067. As discussed on the mailinglist, this was not the correct approach.
2013-04-06sockfilt.c: Fixed detection of client-side connection closeMarc Hoersken
WINSOCK only: Since FD_CLOSE is only signaled once, it may trigger at the same time as FD_READ. Data actually being available makes it impossible to detect that the connection was closed by checking that recv returns zero. Another recv attempt could block the connection if it was not closed. This workaround abuses exceptfds in conjunction with readfds to signal that the connection has actually closed.
2013-04-06runtests.pl: Fixed --verbose parameter passed to http_pipe.pyMarc Hoersken
2013-04-06sockfilt.c: Reduce CPU load while running under a Windows PIPEMarc Hoersken
2013-04-06tftpd.c: Apply sread timeout to the whole data transfer sessionMarc Hoersken
2013-04-06getpart.pm: Strip carriage returns to fix Windows supportMarc Hoersken
2013-04-06ftp tests: libcurl returns CURLE_FTP_ACCEPT_FAILED better nowDaniel Stenberg
Since commit 57aeabcc1a20f, it handles errors on the control connection while waiting for the data connection better. Test 591 and 592 are updated accordingly.
2013-04-06tftpd.c: Follow up cleanup and restore of previous sockoptMarc Hoersken
2013-04-06tftpd.c: Fixed sread timeout on Windows by setting it manuallyMarc Hoersken
2013-04-06ftp.pm: Added tskill to support Windows XP HomeMarc Hoersken
2013-04-06runtests.pl: Modularization of MinGW/Msys compatibility functionsMarc Hoersken
2013-04-06ftp.pm: Made Perl testsuite able to handle Windows processesMarc Hoersken
2013-04-06util.c: Revert workaround eeefcdf, 6eb56e7 and e3787e8Marc Hoersken
2013-04-06ftp.pm: Made Perl testsuite able to kill Windows processesMarc Hoersken
2013-04-06util.c: Follow up cleanup on eeefcdfMarc Hoersken
2013-04-06cpp: use #ifdef __MINGW32__ to avoid compiler complaintsDaniel Stenberg
... instead of just #if
2013-04-06util.c: Made write_pidfile write the correct PID on MinGW/MsysMarc Hoersken
This workaround fixes an issue on MinGW/Msys regarding the Perl testsuite scripts not being able to signal or control the server processes. The MinGW Perl runtime only sees the Msys processes and their corresponding PIDs, but sockfilt (and other servers) wrote the Windows PID into their PID-files. Since this PID is useless to the testsuite, the write_pidfile function was changed to search for the Msys PID and write that into the PID-file.
2013-04-05sockfilt.c: Fixed handling of multiple fds being signaledMarc Hoersken
2013-04-04sockfilt.c: Added wrapper functions to fix Windows console issuesMarc Hoersken
The new read and write wrapper functions support reading from stdin and writing to stdout/stderr on Windows by using the appropriate Windows API functions and data types.
2013-04-04lib1509.c: fix compiler warningsYang Tse
2013-04-04easy: Fix the broken CURLOPT_MAXCONNECTS optionLinus Nielsen Feltzing
Copy the CURLOPT_MAXCONNECTS option to CURLMOPT_MAXCONNECTS in curl_easy_perform(). Bug: http://curl.haxx.se/bug/view.cgi?id=1212 Reported-by: Steven Gu
2013-03-27test1509: verify proxy header response headers countDaniel Stenberg
Modified sws to support and use custom CONNECT responses instead of the previously naive hard-coded version. Made the HTTP test server able to extract test case number from the host name in a CONNECT request by finding the number after the last dot. It makes 'machine.moo.123' use test case 123. Adapted a larger amount of tests to the new <connect> style. Bug: http://curl.haxx.se/bug/view.cgi?id=1204 Reported by: Martin Jansen
2013-03-25WIN32 MemoryTracking: track wcsdup() _wcsdup() and _tcsdup() usageYang Tse
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in WIN32 specific code, so tracking of these has not been extended for other build targets. Without this fix, memory tracking system on WIN32 builds, when using these functions, would provide misleading results. In order to properly extend this support for all targets curl.h would have to define curl_wcsdup_callback prototype and consequently wchar_t should be visible before that in curl.h. IOW curl_wchar_t defined in curlbuild.h and this pulling whatever system header is required to get wchar_t definition. Additionally a new curl_global_init_mem() function that also receives user defined wcsdup() callback would be required.
2013-03-21imap-tests: Added CRLF to reply data to be compliant with RFC-822Steve Holme
Updated the reply data in tests: 800, 801, 802, 804 and 1321 to possess the CRLF as per RFC-822.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 15:20:49 +0000