Age | Commit message (Collapse) | Author |
|
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes #3817
Closes #3822
|
|
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes #3805
|
|
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
|
|
|
|
|
|
which basically just makes sure LOGOUT is *not* issued on disconnect
|
|
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes #3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
... without a $srcdir prefix. Triggered by the failures in several
autobuilds.
Closes #3781
|
|
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Mark global variables static to avoid compiler warning in Clang when
using -Wmissing-variable-declarations.
Closes #3778
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
Make all SOCKS tests use socksd instead of ssh.
|
|
Closes #3752
|
|
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753
Closes #3762
|
|
Based-on-code-by: Poul T Lomholt
|
|
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes #3654
|
|
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
|
|
These variables are only conditionally initialized.
Closes https://github.com/curl/curl/pull/3739
|
|
Closes https://github.com/curl/curl/pull/3739
|
|
Always use the ANSI version of FormatMessage as we don't have the
curl_multibyte gear available here.
Closes https://github.com/curl/curl/pull/3758
|
|
The stripcredentials unittest fails to compile on platforms without
xattr support, for example the Solaris member in the buildfarm which
fails with the following:
CC unit1621-unit1621.o
CC ../libtest/unit1621-first.o
CCLD unit1621
Undefined first referenced
symbol in file
stripcredentials unit1621-unit1621.o
goto problem 2
ld: fatal: symbol referencing errors. No output written to .libs/unit1621
collect2: error: ld returned 1 exit status
gmake[2]: *** [Makefile:996: unit1621] Error 1
Fix by excluding the test on such platforms by using the reverse
logic from where stripcredentials() is defined.
Closes #3759
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
|
|
As previously planned and documented in DEPRECATE.md, all pipelining
code is removed.
Closes #3651
|
|
Closes #3731
Fixes #3289
|
|
OAUTHBEARER tokens were incorrectly generated in a format similar to
XOAUTH2 tokens. These changes make OAUTHBEARER tokens conform to the
RFC7628.
Fixes: #2487
Reported-by: Paolo Mossino
Closes https://github.com/curl/curl/pull/3377
|
|
|
|
[ci skip]
|
|
The threaded-shared-conn.c example turned into test case. Only works if
pthread was detected.
An attempt to detect future regressions such as e3a53e3efb942a5
Closes #3687
|
|
... to match the style already used for compiling, linking
etc. Acknowledges 'make V=1' to enable verbose.
Closes #3681
|
|
|
|
* Adjusted unit tests 2056, 2057
* do not generally close connections with CURLAUTH_NEGOTIATE after every request
* moved negotiatedata from UrlState to connectdata
* Added stream rewind logic for CURLAUTH_NEGOTIATE
* introduced negotiatedata::GSS_AUTHDONE and negotiatedata::GSS_AUTHSUCC
* Consider authproblem state for CURLAUTH_NEGOTIATE
* Consider reuse_forbid for CURLAUTH_NEGOTIATE
* moved and adjusted negotiate authentication state handling from
output_auth_headers into Curl_output_negotiate
* Curl_output_negotiate: ensure auth done is always set
* Curl_output_negotiate: Set auth done also if result code is
GSS_S_CONTINUE_NEEDED/SEC_I_CONTINUE_NEEDED as this result code may
also indicate the last challenge request (only works with disabled
Expect: 100-continue and CURLOPT_KEEP_SENDING_ON_ERROR -> 1)
* Consider "Persistent-Auth" header, detect if not present;
Reset/Cleanup negotiate after authentication if no persistent
authentication
* apply changes introduced with #2546 for negotiate rewind logic
Fixes #1261
Closes #1975
|
|
The check that prevents payload from sending in case of authentication
doesn't check properly if the authentication is done or not.
They're cases where the proxy respond "200 OK" before sending
authentication challenge. This change takes care of that.
Fixes #2431
Closes #3669
|
|
Reproduced bug #3649
Closes #3659
|
|
This reverts commit 3773de378d48b06c09931e44dca4d274d0bfdce0.
Regression shipped in 7.64.0
Fixes #3649
|
|
To not "collide" or use up the regular curl_ name space. Also makes them
easier to detect in helper scripts.
Closes #3656
|
|
|
|
- Change closure handle to receive verbose setting from the easy handle
most recently added via curl_multi_add_handle.
The closure handle is a special easy handle used for closing cached
connections. It receives limited settings from the easy handle most
recently added to the multi handle. Prior to this change that did not
include verbose which was a problem because on connection shutdown
verbose mode was not acknowledged.
Ref: https://github.com/curl/curl/pull/3598
Co-authored-by: Daniel Stenberg
Closes https://github.com/curl/curl/pull/3618
|
|
Test 659 verifies
Also fixed the test 658 name
Closes #3641
|
|
|
|
|
|
|
|
Follow-up to 8eddb8f4259.
If the cookieinfo pointer is NULL there really is nothing to save.
Without this fix, we got a problem when a handle was using shared object
with cookies and is told to "FLUSH" it to file (which worked) and then
the share object was removed and when the easy handle was closed just
afterwards it has no cookieinfo and no cookies so it decided to save an
empty jar (overwriting the file just flushed).
Test 1905 now verifies that this works.
Assisted-by: Michael Wallner
Assisted-by: Marcel Raad
Closes #3621
|
|
Follow-up to 180501cb02
Reported-by: Marcel Raad
Fixes #3609
Closes #3620
|
|
|
|
... and remove it from the dist tarball. It has served its time, it
barely gets updated anymore and "everything curl" is now convering all
this document once tried to include, and does it more and better.
In the compressed scenario, this removes ~15K data from the binary,
which is 25% of the -M output.
It remains in the git repo for now for as long as the web site builds a
page using that as source. It renders poorly on the site (especially for
mobile users) so its not even good there.
Closes #3587
|
|
and make CONNECT_ONLY conections never reuse any existing ones either.
Reported-by: Pavel Löbl
Bug: https://curl.haxx.se/mail/lib-2019-02/0064.html
Closes #3586
|
|
|
|
The draft-ietf-httpbis-rfc6265bis-02 draft, specify a set of prefixes
and how they should affect cookie initialization, which has been
adopted by the major browsers. This adds support for the two prefixes
defined, __Host- and __Secure, and updates the testcase with the
supplied examples from the draft.
Closes #3554
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
|
|
I missed to check this in with commit
71786c0505926aaf7e9b2477b2fb7ee16a915ec6, which only disabled the test.
This fixes the actual linker error.
Closes https://github.com/curl/curl/pull/3568
|
|
Heimdal includes on FreeBSD spewed out lots of them. Less so now.
Closes #3566
|
|
This test doesn't link without FTP support after
fc7ab4835b5fd09d0a6f57000633bb6bb6edfda1, which made Curl_fnmatch
unavailable without FTP support.
Closes https://github.com/curl/curl/pull/3565
|