aboutsummaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2020-02-26smtp: Support UTF-8 based host names in the RCPT TO commandSteve Holme
2020-02-26smtp: Support UTF-8 based host names in the MAIL commandSteve Holme
Non-ASCII host names will be ACE encoded if IDN is supported.
2020-02-25smtp: Added UTF-8 mailbox tests to verify existing behaviourSteve Holme
2020-02-24ftpserver: Updated VRFY_smtp() so the response isn't necessary in the test caseSteve Holme
2020-02-24ftpserver: Corrected the e-mail address regex in MAIL_smtp() and RCTP_smtp()Steve Holme
The dot character between the host and the tld was not being escaped, which meant it specified a match of 'any' character rather than an explicit dot separator. Additionally removed the dot character from the host name as it allowed the following to be specified as a valid address in our test cases: <bad@example......com> Both are typos from 98f7ca7 and 8880f84 :( I can't remember whether my intention was to allow sub-domains to be specified in the host or not with these additional dots, but by placing it outside of the host means it can only be specified once per domain and by placing a + after the new grouping support for sub-domains is kept. Closes #4912
2020-02-24hmac: Added a unit test for the HMAC hash generationSteve Holme
Closes #4973
2020-02-23tests: Added a unit test for MD4 digest generationSteve Holme
Closes #4970
2020-02-23test1610: Fixed the link to the unit testSteve Holme
Typo from 81c37124.
2020-02-23md5/sha256: Updated the functions to allow non-string data to be hashedSteve Holme
2020-02-22tests: Added a unit test for SHA256 digest generationSteve Holme
Follow up to 2b5b37c. Closes #4968
2020-02-18altsvc: make saving the cache an atomic operationDaniel Stenberg
... by writing the file to temp name then rename to the final when done. Assisted-by: Jay Satiro Fixes #4936 Closes #4942
2020-02-09altsvc: keep a copy of the file name to survive handle resetDaniel Stenberg
The alt-svc cache survives a call to curl_easy_reset fine, but the file name to use for saving the cache was cleared. Now the alt-svc cache has a copy of the file name to survive handle resets. Added test 1908 to verify. Reported-by: Craig Andrews Fixes #4898 Closes #4902
2020-02-07digest: Do not quote algorithm in HTTP authorisationPierre-Yves Bigourdan
RFC 7616 section 3.4 (The Authorization Header Field) states that "For historical reasons, a sender MUST NOT generate the quoted string syntax for the following parameters: algorithm, qop, and nc". This removes the quoting for the algorithm parameter. Reviewed-by: Steve Holme Closes #4890
2020-02-07ftp: remove superfluous checking for crlf in user or pwdDaniel Stenberg
... as this is already done much earlier in the URL parser. Also add test case 894 that verifies that pop3 with an encodedd CR in the user name is rejected. Closes #4887
2020-02-02cleanup: fix typos and wording in docs and commentsPedro Monreal
Closes #4869 Reviewed-by: Emil Engler and Daniel Gustafsson
2020-01-28urlapi: guess scheme correct even with credentials givenDaniel Stenberg
In the "scheme-less" parsing case, we need to strip off credentials first before we guess scheme based on the host name! Assisted-by: Jay Satiro Fixes #4856 Closes #4857
2020-01-28global_init: move the IPv6 works status bool to multi handleDaniel Stenberg
Previously it was stored in a global state which contributed to curl_global_init's thread unsafety. This boolean is now instead figured out in curl_multi_init() and stored in the multi handle. Less effective, but thread safe. Closes #4851
2020-01-24llist: removed unused Curl_llist_move()Daniel Stenberg
(and the corresponding unit test) Closes #4842
2020-01-21smtp: Allow RCPT TO command to fail for some recipientsPavel Volgarev
Introduces CURLOPT_MAIL_RCPT_ALLLOWFAILS. Verified with the new tests 3002-3007 Closes #4816
2020-01-21curl: Let -D merge headers in one file againEmil Engler
Closes #4762 Fixes #4753
2020-01-20HTTP: increase EXPECT_100_THRESHOLD to 1Mb加藤郁之
Mentioned: https://curl.haxx.se/mail/lib-2020-01/0050.html Closes #4814
2020-01-13curl: make #0 not output the full URLDaniel Stenberg
It was not intended nor documented! Added test 1176 to verify. Reported-by: vshmuk on hackerone Closes #4812
2020-01-11ngtcp2: Add an error code for QUIC connection errorsEmil Engler
- Add new error code CURLE_QUIC_CONNECT_ERROR for QUIC connection errors. Prior to this change CURLE_FAILED_INIT was used, but that was not correct. Closes https://github.com/curl/curl/pull/4754
2020-01-11multi: Change curl_multi_wait/poll to error on negative timeoutJay Satiro
- Add new error CURLM_BAD_FUNCTION_ARGUMENT and return that error when curl_multi_wait/poll is passed timeout param < 0. Prior to this change passing a negative value to curl_multi_wait/poll such as -1 could cause the function to wait forever. Reported-by: hamstergene@users.noreply.github.com Fixes https://github.com/curl/curl/issues/4763 Closes https://github.com/curl/curl/pull/4765
2020-01-09test1167: verify global symbols in public headers are curl prefixedDaniel Stenberg
... using the new badsymbols.pl perl script Fixes #4793 Closes #4794
2020-01-09libtest/mk-lib1521: adapt to new public header layoutDaniel Stenberg
2020-01-09runtests: make random seed fixed for a monthDaniel Stenberg
When using randomized features of runtests (-R and --shallow) it is useful to have a fixed random seed to make sure for example extra commits in a branch or a rebase won't change the seed that would make repeated runs work differently. As it is also useful to change seed sometimes, the default seed is now determined based on the current month (and first line curl -V output). When the month changes, so will the random seed. The specific seed is also shown in the standard test suite top header and it can be set explictly with the new --seed=[num] option so that the exact order of a previous run can be achieved. Closes #4734
2020-01-06TrackMemory tests: always remove CR before LFMarcel Raad
It was removed for output containing ' =' via `s/ =.*//`. With classic MinGW, this made lines with `free()` end with CRLF, but lines with e.g. `malloc()` end with only LF. The tests expect LF only. Closes https://github.com/curl/curl/pull/4788
2020-01-06curl -w: handle a blank input file correctlyDaniel Stenberg
Previously it would end up with an uninitialized memory buffer that would lead to a crash or junk getting output. Added test 1271 to verify. Reported-by: Brian Carpenter Closes #4786
2020-01-04curl: properly free mimepost dataDaniel Stenberg
... as it could otherwise leak memory when a transfer failed. Added test 1293 to verify. Reported-by: Brian Carpenter Fixes #4781 Closes #4782
2020-01-03tests: Fix bounce requests with truncated writesMarc Aldorasi
Prior to this change the swsbounce check in service_connection could fail because prevtestno and prevpartno were not set, which would cause the wrong response data to be sent to some tests and cause them to fail. Ref: https://github.com/curl/curl/pull/4717#issuecomment-570240785
2019-12-31tests: Change NTLM tests to require SSLJay Satiro
Prior to this change tests that required NTLM feature did not require SSL feature. There are pending changes to cmake builds that will allow enabling NTLM in non-SSL builds in Windows. In that case the NTLM auth strings created are different from what is expected by the NTLM tests and they fail: "The issue with NTLM is that previous non-SSL builds would not enable NTLM and so the NTLM tests would be skipped." Assisted-by: marc-groundctl@users.noreply.github.com Ref: https://github.com/curl/curl/pull/4717#issuecomment-566218729 Closes https://github.com/curl/curl/pull/4768
2019-12-19sws: search for "Testno:" header uncondtionally if no testnoDaniel Stenberg
Even if the initial request line wasn't found. With the fix to 1455, the test number is now detected correctly. (Problem found when running tests in random order.) Closes #4744
2019-12-19tests: set LC_ALL in more testsDaniel Stenberg
Follow-up to 23208e330ac0c21 Closes #4743
2019-12-19test165: set LC_ALL=en_US.UTF-8 tooDaniel Stenberg
On my current Debian Unstable with libidn2 2.2.0, I get an error if LC_ALL is set to blank. Then curl errors out with: curl: (3) Failed to convert www.åäö.se to ACE; could not convert string to UTF-8 Closes #4738
2019-12-19test1456: remove the use of a fixed local portDaniel Stenberg
Fixup the test to instead not compare the port number. It sometimes caused problems like this: "curl: (45) bind failed with errno 98: Address already in use" Closes #4733
2019-12-18test1270: a basic -w redirect_url testDaniel Stenberg
Closes #4728
2019-12-16tests: make sure checksrc runs on header files tooDaniel Stenberg
2019-12-15lib1591: free memory properly on OOM, in the trailers callbackDaniel Stenberg
Detected by torture tests. Closes #4720
2019-12-15runtests: --repeat=[num] to repeat testsDaniel Stenberg
Closes #4715
2019-12-13tests: use DoH feature for DoH testsMarcel Raad
Previously, http/2 was used instead. Assisted-by: Jay Satiro Closes https://github.com/curl/curl/pull/4692
2019-12-13tests: fix build with `CURL_DISABLE_DOH`Marcel Raad
Closes https://github.com/curl/curl/pull/4692
2019-12-13unit1620: fix bad free in OOMDaniel Stenberg
Closes #4709
2019-12-13unit1609: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13unit1607: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13lib1559: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-13lib1557: fix mem-leak in OOMDaniel Stenberg
Closes #4709
2019-12-11runtests: introduce --shallow to reduce huge torture testsDaniel Stenberg
When set, shallow mode limits runtests -t to make no more than NUM fails per test case. If more are found, it will randomly discard entries until the number is right. The random seed can also be set. This is particularly useful when running MANY tests as then most torture failures will already fail the same functions over and over and make the total operation painfully tedious. Closes #4699
2019-12-09tests: make it possible to set executable extensionsMarc Hoersken
This enables the use of Windows Subsystem for Linux (WSL) to run the testsuite against Windows binaries while using Linux servers. This commit introduces the following environment variables: - CURL_TEST_EXE_EXT: set the executable extension for all components - CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only - CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only Later testcurl.pl could be adjusted to make use of those variables. - CURL_TEST_EXE_EXT_SRV: set it for the test servers only (This is one of several commits to support use of WSL for the tests.) Closes https://github.com/curl/curl/pull/3899
2019-12-09tests: fix permissions of ssh keys in WSLMarc Hoersken
Keys created on Windows Subsystem for Linux (WSL) require it for some reason. (This is one of several commits to support use of WSL for the tests.) Ref: https://github.com/curl/curl/pull/3899
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 16:37:09 +0000