From 27f8c93dafc2d3db7938b990efb5e039cfa75251 Mon Sep 17 00:00:00 2001 From: John Malmberg Date: Thu, 8 Aug 2013 13:11:29 +0200 Subject: packages/vms: update VMS build files VMS modified files either missing from a previous commit and changes to remove references to CVS repositories. --- packages/vms/build_vms.com | 49 ++++++++ packages/vms/clean_gnv_curl.com | 9 ++ packages/vms/compare_curl_source.com | 12 +- packages/vms/curl_gnv_build_steps.txt | 77 +++++++++--- packages/vms/gnv_link_curl.com | 3 +- packages/vms/make_pcsi_curl_kit_name.com | 2 +- packages/vms/readme | 198 +++++++++++++++++++++++++++---- packages/vms/setup_gnv_curl_build.com | 24 +--- 8 files changed, 307 insertions(+), 67 deletions(-) diff --git a/packages/vms/build_vms.com b/packages/vms/build_vms.com index bfead6cf0..4ec7635e2 100644 --- a/packages/vms/build_vms.com +++ b/packages/vms/build_vms.com @@ -340,18 +340,64 @@ $ file = "[]config_vms.h" $ if f$search(file) .nes. "" then delete/log 'file';* $ file = "[]config.h" $ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[]curl-config." +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[]libcurl.pc" +$ if f$search(file) .nes. "" then delete/log 'file';* $ file = "[.lib.cxx_repository]cxx$demangler_db." $ if f$search(file) .nes. "" then delete/log 'file';* $ file = "[.src.cxx_repository]cxx$demangler_db." $ if f$search(file) .nes. "" then delete/log 'file';* $ file = "[.lib]config_vms.h" $ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]curl_crtl_init" +$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;* +$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;* +$ file = "[...]gnv$curlmsg" +$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;* +$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;* +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ file = "[...]curlmsg" +$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;* +$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;* +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ file = "[...]report_openssl_version" +$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;* +$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;* +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ file = "[...]hp_ssl_release_info.txt" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]gnv_libcurl_xfer.mar_exact" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]gnv_libcurl_xfer" +$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;* +$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;* +$ if f$search("''file'.opt") .nes. "" then delete/log 'file'.opt;* +$ file = "[...]curl-*_original_src.bck" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]curl-*_vms_src.bck" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]curl-*.release_notes" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]*curl*.pcsi$desc" +$ if f$search(file) .nes. "" then delete/log 'file';* +$ file = "[...]*curl*.pcsi$text" +$ if f$search(file) .nes. "" then delete/log 'file';* +$! $ if clean_all .eq. 0 then goto Common_Exit $ endif $! $! $ if clean_all .ne. 0 $ then +$ file = "[...]gnv$libcurl" +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;* +$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;* +$ file = "[.src]curl" +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;* +$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;* $ prods = proc_dev_dir - delim + ".ALPHA" + delim + "*.*;*" $ if (f$search(prods) .nes. "") then delete /log 'prods' $ prods = proc_dev_dir + "ALPHA" + ".DIR;1" @@ -367,6 +413,9 @@ $ if (f$search(prods) .nes. "") then delete /log 'prods' $ prods = proc_dev_dir + "VAX"+ ".DIR;1" $ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods' $ if (f$search(prods) .nes. "") then delete /log 'prods' +$ file = "[...]macro32_exactcase" +$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;* +$ if f$search("''file'.jnl") .nes. "" then delete/log 'file'.jnl;* $ goto Common_Exit $ endif $! diff --git a/packages/vms/clean_gnv_curl.com b/packages/vms/clean_gnv_curl.com index 25af784cc..0bef42c1b 100644 --- a/packages/vms/clean_gnv_curl.com +++ b/packages/vms/clean_gnv_curl.com @@ -211,6 +211,15 @@ $! $ file = "lcl_root:[.packages.vms]macro32_exactcase.exe" $ if f$search(file) .nes. "" then delete 'file';* $! +$ file = "lcl_root:[.packages.vms]report_openssl_version.exe" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.packages.vms]hp_ssl_release_info.txt" +$ if f$search(file) .nes. "" then delete 'file';* +$! +$ file = "lcl_root:[.src]curl.exe" +$ if f$search(file) .nes. "" then delete 'file';* +$! $all_exit: $! $! Put the default back. diff --git a/packages/vms/compare_curl_source.com b/packages/vms/compare_curl_source.com index 7df4bedef..eeaec31dc 100644 --- a/packages/vms/compare_curl_source.com +++ b/packages/vms/compare_curl_source.com @@ -43,7 +43,7 @@ $! The copy directory is vms_root:[project_name] $! The UPDATE parameter is ignored. $! $! This setting is used to make sure that the working vms directory -$! and the CVS checkout directory have the same contents. +$! and the repository checkout directory have the same contents. $! $! If P1 is "SRCBCK" then this $! The source directory tree is: src_root:[project_name] @@ -55,7 +55,7 @@ $! $! This is to make sure that the backup save set for the unmodified $! source is up to date. $! -$! If your CVS checkout is not on an NFS mounted volume, you do not +$! If your repository checkout is not on an NFS mounted volume, you do not $! need to use this option or have the logical name src_root1 defined. $! $! If P1 is "VMSBCK" then this changes the two directories: @@ -195,8 +195,6 @@ $ ref_name = f$parse(ref_spec,,,"NAME") $ ref_type = f$parse(ref_spec,,,"TYPE") $! $! -$ if f$locate(".CVS]", ref_dir) .lt. f$length(ref_dir) then goto loop -$ $ rel_path = ref_dir - "[" - ref_base_dir $! rel_path_len = f$length(rel_path) - 1 $! delim = f$extract(rel_path_len, 1, rel_path) @@ -336,12 +334,6 @@ $! $ wrk_skip = 0 $ ref_utype = f$edit(ref_type,"UPCASE") $ ref_ufname = f$edit(ref_fname,"UPCASE") -$ if ref_ufname .eqs. "CVS.DIR" then wrk_skip = 1 -$ if ref_fname .eqs. ".cvsignore" then wrk_skip = 1 -$ if ref_fname .eqs. "Entries." then wrk_skip = 1 -$ if ref_fname .eqs. "Repository." then wrk_skip = 1 -$ if ref_fname .eqs. "Root." then wrk_skip = 1 -$! $! $ if wrk_skip .eq. 0 $ then diff --git a/packages/vms/curl_gnv_build_steps.txt b/packages/vms/curl_gnv_build_steps.txt index 6be139b10..e21b37d07 100644 --- a/packages/vms/curl_gnv_build_steps.txt +++ b/packages/vms/curl_gnv_build_steps.txt @@ -1,7 +1,5 @@ From File: curl_gnv_build_steps.txt -$Id$ - Copyright 2009, John Malmberg Permission to use, copy, modify, and/or distribute this software for any @@ -23,7 +21,7 @@ Unix builds use. Building CURL on OpenVMS using GNV requires GNV V2.1-2 or the updated images that are available via anonymous FTP at encompasserve.org in the gnv directory. It also requires the GNV Bash 4.2.45 kit as an update from the -same location. +same location or from the sourceforge.net GNV project. The HP C 7.x compiler was used for building the GNV version. @@ -51,14 +49,15 @@ VMS_ROOT: is for the source files that are specific to OpenVMS. LCL_ROOT: is manually created to have the same base and sub-directories as SRC_ROOT: and VMS_ROOT: -The logical name REF_ROOT: is defined to be a logical name that is a search -list for VMS_ROOT:,SRC_ROOT: +The logical name REF_ROOT: may be defined to be a search list for +VMS_ROOT:,SRC_ROOT: -The logical name PRJ_ROOT: is defined to be a logical name that is a search -list for LCL_ROOT:,REF_ROOT: +The logical name PRJ_ROOT: is defined to be a search list for +LCL_ROOT:,VMS_ROOT:,SRC_ROOT: For the make install process to work, it must have write access to the directories referenced by the GNU: logical name. + In future releases of GNV, and with GNV Bash 4.2.45 installed, this name should be GNV$GNU: @@ -71,9 +70,15 @@ OLD_GNU: can be set up to reference the real GNV directory tree. Then a local copy of the GNU/GNV$GNU logical names can be set up as a search list such as NEW_GNU:,OLD_GNU: -The directory NEW_GNU:[usr] should be created. The make install phase will +The directory NEW_GNU:[usr] should be created. The make install phase should create all the other directories. +The make install process may abort if curl is already because it can not +uninstall the older version of curl because it does not have permission. + +The file stage_curl_install.com is used set up a new_gnu: directory tree +for testing. The PCSI kitting procedure uses these files as input. + These files do not create the directories in the VMS_ROOT and LCL_ROOT directory trees. You can create them with commands similar to: @@ -131,13 +136,13 @@ This command procedure does the following: $ @gnv_link_curl.com - $ purge new_gnu:[*...]/log + $ @stage_curl_install.com + $ purge new_gnu:[*...]/log To clean up after a build to start over, the following commands are used: $ bash - bash$ export GNV_DISABLE_DCL_FALLBACK=1 bash$ cd ../.. bash$ make clean bash$ exit @@ -161,6 +166,10 @@ files from new_gnu: to old_gnu: at your convenience. Building a PCSI kit for an archictecture takes the following steps after making sure that you have a working build environment. +Note that it requires manually creating two logical names as described +below. It is intentional that they be manually set. This is for +branding the PCSI kit based on who is making the kit. + 1. Make sure that you have a staging directory that can be referenced by the path STAGE_ROOT:[KIT] @@ -174,9 +183,9 @@ making sure that you have a working build environment. 4. Define the logical name GNV_PCSI_PRODUCER_FULL_NAME to be your full name or full name of your company. - 5. If you are producing an update kit, then define the logical name - GNV_PCSI_PATCHLEVEL to the letter E followed by a number. Do not - use a patch level for kits built from the daily CVS snapshot. + 5. If you are producing an update kit, then update the file + vms_eco_level.h by changing the value for the VMS_ECO_LEVEL macro. + This file is currently only used in building the PCSI kit. 6. Edit the file PCSI_GNV_CURL_FILE_LIST.TXT if there are new files added to the kit. These files should all be ODS-2 legal filenames and @@ -196,15 +205,49 @@ making sure that you have a working build environment. step, the PCSI kit built by these steps does a rename to the correct case as a post install step. - 7. Build the PCSI kit with @pcsi_product_gnv_curl.com + 7. Edit the build_curl_pcsi_desc.com and build_curl_pcsi_text.com if you + have changed the version of ZLIB that curl is built against. + + 8. Prepare to backup the files for building the kit. + + Note that if src_root: or vms_root: are NFS mounted disks, the + step of backing up the source files will probably hang or fail. + + You need to copy the source files to VMS mounted disks and create + logical names SRC_ROOT1 and VMS_ROOT1 to work around this to to + reference local disks. Make sure src_root1:[000000] and + vms_root1:[000000] exist and can be written to. + + The command procedure compare_curl_source can be used to check + those directories and keep them up to date. + + @compare_curl_source.com SRCBCK UPDATE + + This compares the reference project source with the backup + staging directory for it and updates with any changes. + + @compare_curl_source.com VMSBCK UPDATE + + This compares the VMS specific source with the backup + staging directory for it and updates with any changes. + + Leave off "UPDATE" to just check without doing any changes. + + If you are not using NFS mounted disks and do not want to have a + separate directory for staging the sources for backup make sure + that src_root1: and vms_root1: do not exist. + + 9. Build the PCSI kit with @pcsi_product_gnv_curl.com The following message is normal: %PCSI-I-CANNOTVAL, cannot validate - EAGLE$DQA0:[stage_root.][kit]JEM-AXPVMS-CURL-D0719-6-1.PCSI;1 + EAGLE$DQA0:[stage_root.][kit]VMSPORTS-AXPVMS-CURL-V0731-0-1.PCSI;1 -PCSI-I-NOTSIGNED, product kit is not signed and therefore has no manifest file - This will result in both compressed and uncompressed kits for the target - platform. + This will result in an uncompressed kit for the target platform. + On Alpha and Integrity, the pcsi_product_gnv_curl.com can be used with + the "COMPRESSED" parameter to build both a compressed and uncompressed + kits. Good Luck. diff --git a/packages/vms/gnv_link_curl.com b/packages/vms/gnv_link_curl.com index 3e6eba091..fadbbcceb 100644 --- a/packages/vms/gnv_link_curl.com +++ b/packages/vms/gnv_link_curl.com @@ -278,7 +278,8 @@ and before installing Curl. $PRODUCT EXTRACT FILE - /select=(ssl$libcrypto_shr32.exe,ssl$libssl_shr32.exe)- /source=device:[dir] - - /destination=device:[vms$common.gnv.lib] + /options=noconfirm - + /destination=device:[vms$common.gnv.lib] SSL The [vms$common.sys$startup}curl_startup.com procedure will then configure libcurl to use these shared images instead of the system ones. diff --git a/packages/vms/make_pcsi_curl_kit_name.com b/packages/vms/make_pcsi_curl_kit_name.com index d896da281..f644fe3ec 100644 --- a/packages/vms/make_pcsi_curl_kit_name.com +++ b/packages/vms/make_pcsi_curl_kit_name.com @@ -136,7 +136,7 @@ $! We encode the snapshot date into the version as an ECO since a daily $! can never have an ECO. $! $! version_type = 'V' for a production release, and 'D' for a build from a -$! daiy CVS snapshot. +$! daiy snapshot of the curl source. $ majorver = f$element(0, ".", raw_version) $ minorver = f$element(1, ".", raw_version) $ raw_update = f$element(2, ".", raw_version) diff --git a/packages/vms/readme b/packages/vms/readme index 22fde88e2..1b2458053 100644 --- a/packages/vms/readme +++ b/packages/vms/readme @@ -11,6 +11,11 @@ History: 15-MAR-2004, MSK, Updated to reflect the new files in this directory. 14-FEB-2005, MSK, removed config-vms.h_with* file comments 10-FEB-2010, SMS. General update. +14-Jul-2013, JEM, General Update, add GNV build information. + + +The release notes installed by the PCSI kit consist of this file and the +curl_gnv_build_steps.txt and other useful information. Prerequisites: @@ -20,37 +25,161 @@ OpenSSL or hp SSL, if you want SSL support What is Here: -This directory contains the following files: +This directory contains the following files for a DCL based build. + +backup_gnv_curl_src.com This procedure backs up the source modules for + creating a PCSI kit. + +build_curl-config_script.com + Procedure to create the curl-config script. + +build_gnv_curl.com This procedure does a build of curl using the + GNV utilities and then uses DCL tools to build + the libcurl shared image. The setup_gnv_curl_build.com + procedure must be run first. + +build_gnv_curl_pcsi_desc.com + This procedure builds the pcsi$desc file for + creating a PCSI based package. + +build_gnv_curl_pcsi_text.com + This procedure builds the pcsi$text file for + creating a PCSI based package. + +build_gnv_curl_release_notes.com + This procedure creates the release notes for + a PCSI kit based on curl_release_note_start.txt, + this readme file, and the curl_gnv_build_steps.txt + +build_libcurl_pc.com Procedure to create a libcurl.pc file. + +build_vms.com DCL based build procedure. + +clean_gnv_curl.com This procedure cleans up the files generated by + a GNV based build. + +config_h.com DCL based procedure used by build_vms.com + to run generate the curl_config.h file. + This is a generic procedure that does most + of the work for generating config.h files. + +compare_curl_source.com Procedure to compare the working directory + with a repository directory or a backup staging + directory. + +curl_crtl_init.c A special pre-initialization routine to for + programs to behave more Unix like when run + under GNV. + +curl_gnv_build_steps.txt + Detailed instructions on how to built curl using + GNV and how to build the libcurl shared image and + PCSI kit. + +curl_release_note_start.txt + The first part of the curl release notes. + +curl_startup.com A procedure run at VMS startup to install the + libcurl shared image and to set up the needed + logical names. -build_vms.com Build procedure. -config-vms.h VMS-specific config.h. curlmsg.h C header defining cURL status code macros. + curlmsg.msg Error message source for curlmsg.h and curlmsg.sdl. + curlmsg.sdl SDL source defining cURL status code constants. + curlmsg_vms.h Mapping of cURL status codes to VMS-form codes. -hpssl_alpha.opt LINK options file for HP SSL on Alpha. -hpssl_ia64.opt LINK options file for HP SSL on IA64. -hpssl_vax.opt LINK options file for HP SSL on VAX. -ldap.opt LINK options file for LDAP. + +generate_config_vms_h_curl.com + DCL procedure to generate the curl specific + definitions for curl_config.h that config_h.com + can not properly generate. + +generate_vax_transfer.com + DCL procedure to read an Alpha/IA64 symbol vector + linker option file and generate the VAX transfer + vector modules. + +gnv_conftest.c_first A helper file for the configure script. + +gnv_curl_configure.sh A script to run the configure script with the + options needed for VMS. + +gnv_libcurl_symbols.opt The symbol vectors needed for Alpha and IA64 + libcurl shared image. + +gnv_link_curl.com Links the libcurl shared image and then links a curl + image to use the libcurl. + +macro32_exactcase.patch The patch file needed to modify VAX Macro32 to be + case sensitive and case preserving. + Makefile.am cURL kit file list for this directory. + Makefile.in cURL kit makefile source for this directory. -openssl_alpha.opt LINK options file for OpenSSL on Alpha. -openssl_ia64.opt LINK options file for OpenSSL on IA64. -openssl_ssl_alpha.opt LINK options file for OpenSSL (SSL_ prefix) on Alpha. -openssl_ssl_ia64.opt LINK options file for OpenSSL (SSL_ prefix) on IA64. -openssl_ssl_vax.opt LINK options file for OpenSSL (SSL_ prefix) on VAX. -openssl_vax.opt LINK options file for OpenSSL on VAX. + +make_gnv_curl_install.sh + Script to do a make install using GNV after running + the configure script. + +make_pcsi_curl_kit_name.com + This generates the name of the PCSI kit based on + the version of curl being built. + +pcsi_gnv_curl_file_list.txt + This is a text file describing what files should + be included in a PCSI kit. + +pcsi_product_gnv_curl.com + This generates the PCSI kit after the libcurl + shared image has been made. + readme. This file. +report_openssl_version.c + Program to check that the openssl version is new + enough for building a shared libcurl image. + +setup_gnv_curl_build.com + This procedure sets up symbols and logical names + for a GNV build environment and also copies some + helper files. + +stage_curl_install.com This procedure sets up new_gnu: directory tree to + for testing the install and building the PCSI kit. + It takes a "remove" option to remove all the staged + files. + +vms_eco_level.h This sets the ECO level for the PCSI kit name. + How to Build: -The (brute-force) builder is [.packages.vms]build_vms.com. Comments in -this procedure describe various optional parameters which enable or -disable optional program features, or which control the build in other -ways. Product files (.EXE, .H, .LIS, .MAP, .OBJ, .OLB, ...) should be -produced in an architecture-specific subdirectory under this directory -([.ALPHA], [.IA64], [.VAX]). +The GNV based build and the DCL based build procedures are not compatible +and you must make sure that none of the build files are present before +running a different type of build. Use the "REALCLEAN" option for +BUILD_VMS.COM and the "REALCLEAN" option for clean_gnv_curl.com. + +The (brute-force) DCL based builder is [.packages.vms]build_vms.com. +Comments in this procedure describe various optional parameters which +enable or disable optional program features, or which control the build +in other ways. Product files (.EXE, .H, .LIS, .MAP, .OBJ, .OLB, ...) +should be produced in an architecture-specific subdirectory under this +directory ([.ALPHA], [.IA64], [.VAX]). + +The file curl_gnv_build_steps.txt contains information on buildling using +the GNV tool kit, building a shared libcurl, and producting a PCSI kit for +distribution. The curl_gnv_build_steps.text is included in the release +notes file of the PCSI kit. + +The building with 64 bit pointers does not currently work. + +The build procedure will detect if HP OpenSSL, LDAP, and Kerberos are +installed and default to building with them. + +The build procedure will also detect if a compatible ZLIB shared image +is installed from a PCSI kit and default to using it. Example build commands: @@ -58,13 +187,42 @@ produced in an architecture-specific subdirectory under this directory @ [.packages.vms]build_vms.com LARGE LDAP submit /noprint [.packages.vms]build_vms.com /param = (LARGE, LDAP) +The build_vms.com procedure does not build the shared image file or the PCSI +kit. If you have built a curl with ZLIB and HPSSL support as well as if +LDAP and Kerberos installed, you can use the GNV_LINK_CURL.COM file. + +The GNV_LINK_CURL.COM contains information on how to link and run with a newer +version of HP SSL than what may be install on an Alpha or IA64 based system. + +To build the PCSI kit, follow the the instructions in the file +curl_gnv_build_steps.txt. Other Notes: +This release fixes known bugs #22, and #57 in the [curl.docs]known_bugs. +file. + +The libcurl formdata.c module and Curl tools post form now have some +understanding of VMS file types. Files will be posted in STREAM_LF format. + +The Curl tool now has some understanding of VMS file types and will upload the +files in STREAM_LF fomat. + +When CURL is uploading a VARIABLE format VMS file, it is less efficient as in +order to get the file size, it will first read the entire file once, and then +read the file again for the actual upload. + +The Curl tool will now always download files into STREAM_LF format. Even if a +file by that name with a different format already exists. This is needed to +allow interrupted downloads to be continued. + + +The libcurl file module still does not understand VMS file types and requires +the input files to be in STREAM_LF to work propery. + The test suites are not supported as of 7.11.0. The curlmsg.sdl and curlmsg.h files are generated from curlmsg.msg. This is not done automatically, since the .MSG file is a hand edit of the relevant stuff from the curl.h file. If you want to do this yourself you'll need the SDL package from the freeware collection. - diff --git a/packages/vms/setup_gnv_curl_build.com b/packages/vms/setup_gnv_curl_build.com index d6a80ac2f..beec733c3 100644 --- a/packages/vms/setup_gnv_curl_build.com +++ b/packages/vms/setup_gnv_curl_build.com @@ -269,26 +269,14 @@ $ endif $! $! $! -$! Need to build the GNV common init module. +$! Need to build the common init module. $!------------------------------------------- -$ if f$search("[vms_common]vms_crtl_init_unix.obj") .nes. "" +$ init_obj = "[.packages.vms]curl_crtl_init.obj" +$ if f$search(init_obj) .eqs. "" $ then -$! Common copy, which should be more up to date than the one in the kit. -$!------------------------------------------------------------------------ -$ define/job gnv_vms_common [vms_common] -$ write sys$output "Using common vms_crtl_init_unix.obj" -$ else -$! For some reason the common files are missing so use the local copies -$!------------------------------------------------------------------------ -$ define/job gnv_vms_common 'default_dir' -$ init_obj = "gnv_vms_common:vms_crtl_init_unix.obj" -$ if f$search(init_obj) .eqs. "" -$ then -$ cc'cflags' 'default_dir'vms_crtl_init.c- - /define=GNV_UNIX_TOOL=1/obj='init_obj' -$ purge 'init_obj' -$ rename 'init_obj' ;1 -$ endif +$ cc'cflags' 'default_dir'curl_crtl_init.c/obj='init_obj' +$ purge 'init_obj' +$ rename 'init_obj' ;1 $ endif $! $all_exit: -- cgit v1.2.3