From 53143910a1c2088a7a1fc71756ca84417cbe0d50 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Sat, 22 Jan 2005 22:43:04 +0000 Subject: \fI marked \fP more function calls etc. --- docs/libcurl/libcurl-tutorial.3 | 176 ++++++++++++++++++++-------------------- 1 file changed, 89 insertions(+), 87 deletions(-) diff --git a/docs/libcurl/libcurl-tutorial.3 b/docs/libcurl/libcurl-tutorial.3 index 00ca9dfc0..32766fc3c 100644 --- a/docs/libcurl/libcurl-tutorial.3 +++ b/docs/libcurl/libcurl-tutorial.3 @@ -5,7 +5,7 @@ .\" * | (__| |_| | _ <| |___ .\" * \___|\___/|_| \_\_____| .\" * -.\" * Copyright (C) 1998 - 2004, Daniel Stenberg, , et al. +.\" * Copyright (C) 1998 - 2005, Daniel Stenberg, , et al. .\" * .\" * This software is licensed as described in the file COPYING, which .\" * you should have received as part of this distribution. The terms @@ -21,7 +21,7 @@ .\" * $Id$ .\" ************************************************************************** .\" -.TH libcurl-tutorial 3 "18 Jun 2004" "libcurl" "libcurl programming" +.TH libcurl-tutorial 3 "22 Jan 2005" "libcurl" "libcurl programming" .SH NAME libcurl-tutorial \- libcurl programming tutorial .SH "Objective" @@ -94,9 +94,9 @@ use the library. Once for your program's entire life time. This is done using curl_global_init() and it takes one parameter which is a bit pattern that tells libcurl what to -initialize. Using CURL_GLOBAL_ALL will make it initialize all known internal -sub modules, and might be a good default option. The current two bits that -are specified are: +initialize. Using \fICURL_GLOBAL_ALL\fP will make it initialize all known +internal sub modules, and might be a good default option. The current two bits +that are specified are: .RS .IP "CURL_GLOBAL_WIN32" which only does anything on Windows machines. When used on @@ -113,17 +113,19 @@ application so if your program or another library already does this, this bit should not be needed. .RE -libcurl has a default protection mechanism that detects if curl_global_init() -hasn't been called by the time curl_easy_perform() is called and if that is -the case, libcurl runs the function itself with a guessed bit pattern. Please -note that depending solely on this is not considered nice nor very good. +libcurl has a default protection mechanism that detects if +\fIcurl_global_init(3)\fP hasn't been called by the time +\fIcurl_easy_perform(3)\fP is called and if that is the case, libcurl runs the +function itself with a guessed bit pattern. Please note that depending solely +on this is not considered nice nor very good. -When the program no longer uses libcurl, it should call curl_global_cleanup(), -which is the opposite of the init call. It will then do the reversed -operations to cleanup the resources the curl_global_init() call initialized. +When the program no longer uses libcurl, it should call +\fIcurl_global_cleanup(3)\fP, which is the opposite of the init call. It will +then do the reversed operations to cleanup the resources the +\fIcurl_global_init(3)\fP call initialized. -Repeated calls to curl_global_init() and curl_global_cleanup() should be -avoided. They should only be called once each. +Repeated calls to \fIcurl_global_init(3)\fP and \fIcurl_global_cleanup(3)\fP +should be avoided. They should only be called once each. .SH "Features libcurl Provides" It is considered best-practice to determine libcurl features run-time rather @@ -153,17 +155,18 @@ It returns an easy handle. Using that you proceed to the next step: setting up your preferred actions. A handle is just a logic entity for the upcoming transfer or series of transfers. -You set properties and options for this handle using curl_easy_setopt(). They -control how the subsequent transfer or transfers will be made. Options remain -set in the handle until set again to something different. Alas, multiple -requests using the same handle will use the same options. +You set properties and options for this handle using +\fIcurl_easy_setopt(3)\fP. They control how the subsequent transfer or +transfers will be made. Options remain set in the handle until set again to +something different. Alas, multiple requests using the same handle will use +the same options. Many of the options you set in libcurl are "strings", pointers to data terminated with a zero byte. Keep in mind that when you set strings with -curl_easy_setopt(), libcurl will not copy the data. It will merely point to -the data. You MUST make sure that the data remains available for libcurl to -use until finished or until you use the same option again to point to -something else. +\fIcurl_easy_setopt(3)\fP, libcurl will not copy the data. It will merely +point to the data. You MUST make sure that the data remains available for +libcurl to use until finished or until you use the same option again to point +to something else. One of the most basic properties to set in the handle is the URL. You set your preferred URL to transfer with CURLOPT_URL in a manner similar to: @@ -188,11 +191,11 @@ similar to this: You can control what data your function get in the forth argument by setting another property: - curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct); + curl_easy_setopt(easyhandle, CURLOPT_WRITEDATA, &internal_struct); Using that property, you can easily pass local data between your application and the function that gets invoked by libcurl. libcurl itself won't touch the -data you pass with CURLOPT_WRITEDATA. +data you pass with \fICURLOPT_WRITEDATA\fP. libcurl offers its own default internal callback that'll take care of the data if you don't set the callback with \fICURLOPT_WRITEFUNCTION\fP. It will then @@ -219,14 +222,13 @@ of them later. Let's instead continue to the actual transfer: success = curl_easy_perform(easyhandle); -The \fIcurl_easy_perform(3)\fP will connect to the remote site, do the -necessary commands and receive the transfer. Whenever it receives data, it -calls the callback function we previously set. The function may get one byte -at a time, or it may get many kilobytes at once. libcurl delivers as much as -possible as often as possible. Your callback function should return the number -of bytes it "took care of". If that is not the exact same amount of bytes that -was passed to it, libcurl will abort the operation and return with an error -code. +\fIcurl_easy_perform(3)\fP will connect to the remote site, do the necessary +commands and receive the transfer. Whenever it receives data, it calls the +callback function we previously set. The function may get one byte at a time, +or it may get many kilobytes at once. libcurl delivers as much as possible as +often as possible. Your callback function should return the number of bytes it +\&"took care of". If that is not the exact same amount of bytes that was +passed to it, libcurl will abort the operation and return with an error code. When the transfer is complete, the function returns a return code that informs you if it succeeded in its mission or not. If a return code isn't enough for @@ -240,12 +242,12 @@ previous .SH "Multi-threading Issues" libcurl is completely thread safe, except for two issues: signals and alarm -handlers. Signals are needed for a SIGPIPE handler, and the alarm() Bacall -is used to catch timeouts (mostly during ENS lookup). +handlers. Signals are needed for a SIGPIPE handler, and the alarm() call is +used to deal with timeouts (during DNS lookup). If you are accessing HTTPS or FTPS URLs in a multi-threaded manner, you are then of course using OpenSSL multi-threaded and it has itself a few -requirements on this. Basilio, you need to provide one or two functions to +requirements on this. Basically, you need to provide one or two functions to allow it to function properly. For all details, see this: http://www.openssl.org/docs/crypto/threads.html#DESCRIPTION @@ -326,12 +328,12 @@ CURLOPT_INFILESIZE_LARGE for all known file sizes like this[1]: curl_easy_setopt(easyhandle, CURLOPT_INFILESIZE_LARGE, file_size); .fi -When you call curl_easy_perform() this time, it'll perform all the necessary -operations and when it has invoked the upload it'll call your supplied -callback to get the data to upload. The program should return as much data as -possible in every invoke, as that is likely to make the upload perform as -fast as possible. The callback should return the number of bytes it wrote in -the buffer. Returning 0 will signal the end of the upload. +When you call \fIcurl_easy_perform(3)\fP this time, it'll perform all the +necessary operations and when it has invoked the upload it'll call your +supplied callback to get the data to upload. The program should return as much +data as possible in every invoke, as that is likely to make the upload perform +as fast as possible. The callback should return the number of bytes it wrote +in the buffer. Returning 0 will signal the end of the upload. .SH "Passwords" Many protocols use or even require that user name and password are provided @@ -470,15 +472,14 @@ then passing that list to libcurl. While the simple examples above cover the majority of all cases where HTTP POST operations are required, they don't do multi-part formposts. Multi-part -formposts were introduced as a better way to post (possibly large) binary -data and was first documented in the RFC1867. They're called multi-part -because they're built by a chain of parts, each being a single unit. Each -part has its own name and contents. You can in fact create and post a -multi-part formpost with the regular libcurl POST support described above, but -that would require that you build a formpost yourself and provide to -libcurl. To make that easier, libcurl provides curl_formadd(). Using this -function, you add parts to the form. When you're done adding parts, you post -the whole form. +formposts were introduced as a better way to post (possibly large) binary data +and was first documented in the RFC1867. They're called multi-part because +they're built by a chain of parts, each being a single unit. Each part has its +own name and contents. You can in fact create and post a multi-part formpost +with the regular libcurl POST support described above, but that would require +that you build a formpost yourself and provide to libcurl. To make that +easier, libcurl provides \fIcurl_formadd(3)\fP. Using this function, you add +parts to the form. When you're done adding parts, you post the whole form. The following example sets two simple text parts with plain textual contents, and then a file with binary contents and upload the whole thing. @@ -531,10 +532,10 @@ post handle: .fi Since all options on an easyhandle are "sticky", they remain the same until -changed even if you do call curl_easy_perform(), you may need to tell curl to -go back to a plain GET request if you intend to do such a one as your next -request. You force an easyhandle to back to GET by using the CURLOPT_HTTPGET -option: +changed even if you do call \fIcurl_easy_perform(3)\fP, you may need to tell +curl to go back to a plain GET request if you intend to do such a one as your +next request. You force an easyhandle to back to GET by using the +CURLOPT_HTTPGET option: curl_easy_setopt(easyhandle, CURLOPT_HTTPGET, TRUE); @@ -723,7 +724,7 @@ Mozilla javascript engine in the past. Re-cycling the same easy handle several times when doing multiple requests is the way to go. -After each single curl_easy_perform() operation, libcurl will keep the +After each single \fIcurl_easy_perform(3)\fP operation, libcurl will keep the connection alive and open. A subsequent request using the same easy handle to the same host might just be able to use the already open connection! This reduces network impact a lot. @@ -907,8 +908,8 @@ A little example that deletes a given file before an operation: .fi If you would instead want this operation (or chain of operations) to happen -_after_ the data transfer took place the option to curl_easy_setopt() would -instead be called CURLOPT_POSTQUOTE and used the exact same way. +_after_ the data transfer took place the option to \fIcurl_easy_setopt(3)\fP +would instead be called CURLOPT_POSTQUOTE and used the exact same way. The custom FTP command will be issued to the server in the same order they are added to the list, and if a command gets an error code returned back from the @@ -977,9 +978,9 @@ The perhaps most advanced cookie operation libcurl offers, is saving the entire internal cookie state back into a Netscape/Mozilla formatted cookie file. We call that the cookie-jar. When you set a file name with CURLOPT_COOKIEJAR, that file name will be created and all received cookies -will be stored in it when curl_easy_cleanup() is called. This enabled cookies -to get passed on properly between multiple handles without any information -getting lost. +will be stored in it when \fIcurl_easy_cleanup(3)\fP is called. This enabled +cookies to get passed on properly between multiple handles without any +information getting lost. .SH "FTP Peculiarities We Need" @@ -1107,46 +1108,47 @@ of how to use the easy interface. The multi interface is simply a way to make multiple transfers at the same time, by adding up multiple easy handles in to a "multi stack". -You create the easy handles you want and you set all the options just like -you have been told above, and then you create a multi handle with -curl_multi_init() and add all those easy handles to that multi handle with -curl_multi_add_handle(). +You create the easy handles you want and you set all the options just like you +have been told above, and then you create a multi handle with +\fIcurl_multi_init(3)\fP and add all those easy handles to that multi handle +with \fIcurl_multi_add_handle(3)\fP. When you've added the handles you have for the moment (you can still add new -ones at any time), you start the transfers by call curl_multi_perform(). +ones at any time), you start the transfers by call +\fIcurl_multi_perform(3)\fP. -curl_multi_perform() is asynchronous. It will only execute as little as -possible and then return back control to your program. It is designed to -never block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again -soon, as that is a signal that it still has local data to send or remote data -to receive. +\fIcurl_multi_perform(3)\fP is asynchronous. It will only execute as little as +possible and then return back control to your program. It is designed to never +block. If it returns CURLM_CALL_MULTI_PERFORM you better call it again soon, +as that is a signal that it still has local data to send or remote data to +receive. The best usage of this interface is when you do a select() on all possible file descriptors or sockets to know when to call libcurl again. This also -makes it easy for you to wait and respond to actions on your own -application's sockets/handles. You figure out what to select() for by using -curl_multi_fdset(), that fills in a set of fd_set variables for you with the -particular file descriptors libcurl uses for the moment. +makes it easy for you to wait and respond to actions on your own application's +sockets/handles. You figure out what to select() for by using +\fIcurl_multi_fdset(3)\fP, that fills in a set of fd_set variables for you +with the particular file descriptors libcurl uses for the moment. When you then call select(), it'll return when one of the file handles signal -action and you then call curl_multi_perform() to allow libcurl to do what it -wants to do. Take note that libcurl does also feature some time-out code so -we advice you to never use very long timeouts on select() before you call -curl_multi_perform(), which thus should be called unconditionally every now -and then even if none of its file descriptors have signaled ready. Another -precaution you should use: always call curl_multi_fdset() immediately before -the select() call since the current set of file descriptors may change when -calling a curl function. +action and you then call \fIcurl_multi_perform(3)\fP to allow libcurl to do +what it wants to do. Take note that libcurl does also feature some time-out +code so we advice you to never use very long timeouts on select() before you +call \fIcurl_multi_perform(3)\fP, which thus should be called unconditionally +every now and then even if none of its file descriptors have signaled +ready. Another precaution you should use: always call +\fIcurl_multi_fdset(3)\fP immediately before the select() call since the +current set of file descriptors may change when calling a curl function. If you want to stop the transfer of one of the easy handles in the stack, you -can use curl_multi_remove_handle() to remove individual easy -handles. Remember that easy handles should be curl_easy_cleanup()ed. +can use \fIcurl_multi_remove_handle(3)\fP to remove individual easy +handles. Remember that easy handles should be \fIcurl_easy_cleanup(3)\fPed. When a transfer within the multi stack has finished, the counter of running -transfers (as filled in by curl_multi_perform()) will decrease. When the -number reaches zero, all transfers are done. +transfers (as filled in by \fIcurl_multi_perform(3)\fP) will decrease. When +the number reaches zero, all transfers are done. -curl_multi_info_read() can be used to get information about completed +\fIcurl_multi_info_read(3)\fP can be used to get information about completed transfers. It then returns the CURLcode for each easy transfer, to allow you to figure out success on each individual transfer. -- cgit v1.2.3