From 9124bfba450d4e5909cd55aa1f45362fd54a6299 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Tue, 10 Aug 2010 14:12:05 +0200 Subject: multi: use timeouts properly for MAX_RECV/SEND_SPEED When detecting that the send or recv speed, the multi interface changes state to TOOFAST and previously there was no timeout set that would force a recheck but it would rely on the application to somehow call libcurl anyway. This now sets a timeout for a suitable future time to check again if the average transfer speed is then below the threshold again. --- lib/multi.c | 163 +++++++++++++++++++++++++++++++++--------------------------- 1 file changed, 91 insertions(+), 72 deletions(-) diff --git a/lib/multi.c b/lib/multi.c index 69b80f0ee..778bc4128 100644 --- a/lib/multi.c +++ b/lib/multi.c @@ -934,10 +934,13 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, bool done = FALSE; CURLMcode result = CURLM_OK; struct SingleRequest *k; + struct SessionHandle *data; if(!GOOD_EASY_HANDLE(easy->easy_handle)) return CURLM_BAD_EASY_HANDLE; + data = easy->easy_handle; + do { /* this is a do-while loop just to allow a break to skip to the end of it */ @@ -945,9 +948,9 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, /* Handle the case when the pipe breaks, i.e., the connection we're using gets cleaned up and we're left with nothing. */ - if(easy->easy_handle->state.pipe_broke) { - infof(easy->easy_handle, "Pipe broke: handle 0x%p, url = %s\n", - easy, easy->easy_handle->state.path); + if(data->state.pipe_broke) { + infof(data, "Pipe broke: handle 0x%p, url = %s\n", + easy, data->state.path); if(easy->state != CURLM_STATE_COMPLETED) { /* Head back to the CONNECT state */ @@ -956,7 +959,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, easy->result = CURLE_OK; } - easy->easy_handle->state.pipe_broke = FALSE; + data->state.pipe_broke = FALSE; easy->easy_conn = NULL; break; } @@ -964,31 +967,31 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(easy->easy_conn && easy->state > CURLM_STATE_CONNECT && easy->state < CURLM_STATE_COMPLETED) /* Make sure we set the connection's current owner */ - easy->easy_conn->data = easy->easy_handle; + easy->easy_conn->data = data; switch(easy->state) { case CURLM_STATE_INIT: /* init this transfer. */ - easy->result=Curl_pretransfer(easy->easy_handle); + easy->result=Curl_pretransfer(data); if(CURLE_OK == easy->result) { /* after init, go CONNECT */ multistate(easy, CURLM_STATE_CONNECT); result = CURLM_CALL_MULTI_PERFORM; - easy->easy_handle->state.used_interface = Curl_if_multi; + data->state.used_interface = Curl_if_multi; } break; case CURLM_STATE_CONNECT: /* Connect. We get a connection identifier filled in. */ - Curl_pgrsTime(easy->easy_handle, TIMER_STARTSINGLE); - easy->result = Curl_connect(easy->easy_handle, &easy->easy_conn, + Curl_pgrsTime(data, TIMER_STARTSINGLE); + easy->result = Curl_connect(data, &easy->easy_conn, &async, &protocol_connect); if(CURLE_OK == easy->result) { /* Add this handle to the send or pend pipeline */ - easy->result = addHandleToSendOrPendPipeline(easy->easy_handle, + easy->result = addHandleToSendOrPendPipeline(data, easy->easy_conn); if(CURLE_OK == easy->result) { if(async) @@ -1071,9 +1074,9 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(easy->easy_conn->bits.proxy_connect_closed) { /* reset the error buffer */ - if(easy->easy_handle->set.errorbuffer) - easy->easy_handle->set.errorbuffer[0] = '\0'; - easy->easy_handle->state.errorbuf = FALSE; + if(data->set.errorbuffer) + data->set.errorbuffer[0] = '\0'; + data->state.errorbuf = FALSE; easy->result = CURLE_OK; result = CURLM_CALL_MULTI_PERFORM; @@ -1145,7 +1148,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } else if(easy->result) { /* failure detected */ - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); Curl_done(&easy->easy_conn, easy->result, FALSE); disconnect_conn = TRUE; } @@ -1154,15 +1157,15 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, case CURLM_STATE_WAITDO: /* Wait for our turn to DO when we're pipelining requests */ #ifdef DEBUGBUILD - infof(easy->easy_handle, "Conn %ld send pipe %zu inuse %d athead %d\n", + infof(data, "Conn %ld send pipe %zu inuse %d athead %d\n", easy->easy_conn->connectindex, easy->easy_conn->send_pipe->size, easy->easy_conn->writechannel_inuse?1:0, - isHandleAtHead(easy->easy_handle, + isHandleAtHead(data, easy->easy_conn->send_pipe)?1:0); #endif if(!easy->easy_conn->writechannel_inuse && - isHandleAtHead(easy->easy_handle, + isHandleAtHead(data, easy->easy_conn->send_pipe)) { /* Grab the channel */ easy->easy_conn->writechannel_inuse = TRUE; @@ -1172,7 +1175,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, break; case CURLM_STATE_DO: - if(easy->easy_handle->set.connect_only) { + if(data->set.connect_only) { /* keep connection open for application to use the socket */ easy->easy_conn->bits.close = FALSE; multistate(easy, CURLM_STATE_DONE); @@ -1187,8 +1190,8 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(CURLE_OK == easy->result) { if(!dophase_done) { /* some steps needed for wildcard matching */ - if(easy->easy_handle->set.wildcardmatch) { - struct WildcardData *wc = &easy->easy_handle->wildcard; + if(data->set.wildcardmatch) { + struct WildcardData *wc = &data->wildcard; if(wc->state == CURLWC_DONE || wc->state == CURLWC_SKIP) { /* skip some states if it is important */ Curl_done(&easy->easy_conn, CURLE_OK, FALSE); @@ -1237,7 +1240,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, else retry = (bool)(newurl?TRUE:FALSE); - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); drc = Curl_done(&easy->easy_conn, easy->result, FALSE); /* When set to retry the connection, we must to go back to @@ -1245,7 +1248,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(retry) { if ((drc == CURLE_OK) || (drc == CURLE_SEND_ERROR)) { follow = FOLLOW_RETRY; - drc = Curl_follow(easy->easy_handle, newurl, follow); + drc = Curl_follow(data, newurl, follow); if(drc == CURLE_OK) { multistate(easy, CURLM_STATE_CONNECT); result = CURLM_CALL_MULTI_PERFORM; @@ -1270,7 +1273,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } else { /* failure detected */ - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); Curl_done(&easy->easy_conn, easy->result, FALSE); disconnect_conn = TRUE; } @@ -1299,7 +1302,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } else { /* failure detected */ - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); Curl_done(&easy->easy_conn, easy->result, FALSE); disconnect_conn = TRUE; } @@ -1325,7 +1328,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } else { /* failure detected */ - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); Curl_done(&easy->easy_conn, easy->result, FALSE); disconnect_conn = TRUE; } @@ -1334,7 +1337,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, case CURLM_STATE_DO_DONE: /* Move ourselves from the send to recv pipeline */ - moveHandleFromSendToRecvPipeline(easy->easy_handle, easy->easy_conn); + moveHandleFromSendToRecvPipeline(data, easy->easy_conn); /* Check if we can move pending requests to send pipe */ checkPendPipeline(easy->easy_conn); multistate(easy, CURLM_STATE_WAITPERFORM); @@ -1344,7 +1347,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, case CURLM_STATE_WAITPERFORM: /* Wait for our turn to PERFORM */ if(!easy->easy_conn->readchannel_inuse && - isHandleAtHead(easy->easy_handle, + isHandleAtHead(data, easy->easy_conn->recv_pipe)) { /* Grab the channel */ easy->easy_conn->readchannel_inuse = TRUE; @@ -1353,11 +1356,11 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } #ifdef DEBUGBUILD else { - infof(easy->easy_handle, "Conn %ld recv pipe %zu inuse %d athead %d\n", + infof(data, "Conn %ld recv pipe %zu inuse %d athead %d\n", easy->easy_conn->connectindex, easy->easy_conn->recv_pipe->size, easy->easy_conn->readchannel_inuse?1:0, - isHandleAtHead(easy->easy_handle, + isHandleAtHead(data, easy->easy_conn->recv_pipe)?1:0); } #endif @@ -1365,36 +1368,52 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, case CURLM_STATE_TOOFAST: /* limit-rate exceeded in either direction */ /* if both rates are within spec, resume transfer */ - if( ( ( easy->easy_handle->set.max_send_speed == 0 ) || - ( easy->easy_handle->progress.ulspeed < - easy->easy_handle->set.max_send_speed ) ) && - ( ( easy->easy_handle->set.max_recv_speed == 0 ) || - ( easy->easy_handle->progress.dlspeed < - easy->easy_handle->set.max_recv_speed ) ) - ) + if( ( (data->set.max_send_speed == 0) || + (data->progress.ulspeed < data->set.max_send_speed )) && + ( (data->set.max_recv_speed == 0) || + (data->progress.dlspeed < data->set.max_recv_speed) ) ) multistate(easy, CURLM_STATE_PERFORM); break; case CURLM_STATE_PERFORM: - /* check if over speed */ - if( ( ( easy->easy_handle->set.max_send_speed > 0 ) && - ( easy->easy_handle->progress.ulspeed > - easy->easy_handle->set.max_send_speed ) ) || - ( ( easy->easy_handle->set.max_recv_speed > 0 ) && - ( easy->easy_handle->progress.dlspeed > - easy->easy_handle->set.max_recv_speed ) ) - ) { - /* Transfer is over the speed limit. Change state. TODO: Call - * Curl_expire() with the time left until we're targeted to be below - * the speed limit again. */ - multistate(easy, CURLM_STATE_TOOFAST ); + /* check if over send speed */ + if( (data->set.max_send_speed > 0) && + (data->progress.ulspeed > data->set.max_send_speed) ) { + int buffersize; + long timeout_ms; + + multistate(easy, CURLM_STATE_TOOFAST); + + /* calculate upload rate-limitation timeout. */ + buffersize = (int)(data->set.buffer_size ? + data->set.buffer_size : BUFSIZE); + timeout_ms = Curl_sleep_time(data->set.max_send_speed, + data->progress.ulspeed, buffersize); + Curl_expire(data, timeout_ms); + break; + } + + /* check if over recv speed */ + if( (data->set.max_recv_speed > 0) && + (data->progress.dlspeed > data->set.max_recv_speed) ) { + int buffersize; + long timeout_ms; + + multistate(easy, CURLM_STATE_TOOFAST); + + /* Calculate download rate-limitation timeout. */ + buffersize = (int)(data->set.buffer_size ? + data->set.buffer_size : BUFSIZE); + timeout_ms = Curl_sleep_time(data->set.max_recv_speed, + data->progress.dlspeed, buffersize); + Curl_expire(data, timeout_ms); break; } /* read/write data if it is ready to do so */ easy->result = Curl_readwrite(easy->easy_conn, &done); - k = &easy->easy_handle->req; + k = &data->req; if(!(k->keepon & KEEP_RECV)) { /* We're done receiving */ @@ -1416,7 +1435,7 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(!(easy->easy_conn->protocol & PROT_DUALCHANNEL)) easy->easy_conn->bits.close = TRUE; - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); Curl_done(&easy->easy_conn, easy->result, FALSE); } else if(TRUE == done) { @@ -1429,10 +1448,10 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, retry = (bool)(newurl?TRUE:FALSE); /* call this even if the readwrite function returned error */ - Curl_posttransfer(easy->easy_handle); + Curl_posttransfer(data); /* we're no longer receving */ - moveHandleFromRecvToDonePipeline(easy->easy_handle, + moveHandleFromRecvToDonePipeline(data, easy->easy_conn); /* expire the new receiving pipeline head */ @@ -1444,19 +1463,19 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, /* When we follow redirects or is set to retry the connection, we must to go back to the CONNECT state */ - if(easy->easy_handle->req.newurl || retry) { + if(data->req.newurl || retry) { if(!retry) { /* if the URL is a follow-location and not just a retried request then figure out the URL here */ - newurl = easy->easy_handle->req.newurl; - easy->easy_handle->req.newurl = NULL; + newurl = data->req.newurl; + data->req.newurl = NULL; follow = FOLLOW_REDIR; } else follow = FOLLOW_RETRY; easy->result = Curl_done(&easy->easy_conn, CURLE_OK, FALSE); if(easy->result == CURLE_OK) - easy->result = Curl_follow(easy->easy_handle, newurl, follow); + easy->result = Curl_follow(data, newurl, follow); if(CURLE_OK == easy->result) { multistate(easy, CURLM_STATE_CONNECT); result = CURLM_CALL_MULTI_PERFORM; @@ -1471,10 +1490,10 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, /* but first check to see if we got a location info even though we're not following redirects */ - if (easy->easy_handle->req.location) { - newurl = easy->easy_handle->req.location; - easy->easy_handle->req.location = NULL; - easy->result = Curl_follow(easy->easy_handle, newurl, FOLLOW_FAKE); + if (data->req.location) { + newurl = data->req.location; + data->req.location = NULL; + easy->result = Curl_follow(data, newurl, FOLLOW_FAKE); if (easy->result) free(newurl); } @@ -1491,9 +1510,9 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, if(easy->easy_conn) { /* Remove ourselves from the receive and done pipelines. Handle should be on one of these lists, depending upon how we got here. */ - Curl_removeHandleFromPipeline(easy->easy_handle, + Curl_removeHandleFromPipeline(data, easy->easy_conn->recv_pipe); - Curl_removeHandleFromPipeline(easy->easy_handle, + Curl_removeHandleFromPipeline(data, easy->easy_conn->done_pipe); /* Check if we can move pending requests to send pipe */ checkPendPipeline(easy->easy_conn); @@ -1517,8 +1536,8 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, easy->easy_conn = NULL; } - if(easy->easy_handle->set.wildcardmatch) { - if(easy->easy_handle->wildcard.state != CURLWC_DONE) { + if(data->set.wildcardmatch) { + if(data->wildcard.state != CURLWC_DONE) { /* if a wildcard is set and we are not ending -> lets start again with CURLM_STATE_INIT */ result = CURLM_CALL_MULTI_PERFORM; @@ -1558,17 +1577,17 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, /* NOTE: no attempt to disconnect connections must be made in the case blocks above - cleanup happens only here */ - easy->easy_handle->state.pipe_broke = FALSE; + data->state.pipe_broke = FALSE; if(easy->easy_conn) { /* if this has a connection, unsubscribe from the pipelines */ easy->easy_conn->writechannel_inuse = FALSE; easy->easy_conn->readchannel_inuse = FALSE; - Curl_removeHandleFromPipeline(easy->easy_handle, + Curl_removeHandleFromPipeline(data, easy->easy_conn->send_pipe); - Curl_removeHandleFromPipeline(easy->easy_handle, + Curl_removeHandleFromPipeline(data, easy->easy_conn->recv_pipe); - Curl_removeHandleFromPipeline(easy->easy_handle, + Curl_removeHandleFromPipeline(data, easy->easy_conn->done_pipe); /* Check if we can move pending requests to send pipe */ checkPendPipeline(easy->easy_conn); @@ -1592,17 +1611,17 @@ static CURLMcode multi_runsingle(struct Curl_multi *multi, } while(0); if(CURLM_STATE_COMPLETED == easy->state) { - if(easy->easy_handle->dns.hostcachetype == HCACHE_MULTI) { + if(data->dns.hostcachetype == HCACHE_MULTI) { /* clear out the usage of the shared DNS cache */ - easy->easy_handle->dns.hostcache = NULL; - easy->easy_handle->dns.hostcachetype = HCACHE_NONE; + data->dns.hostcache = NULL; + data->dns.hostcachetype = HCACHE_NONE; } /* now fill in the Curl_message with this info */ msg = &easy->msg; msg->extmsg.msg = CURLMSG_DONE; - msg->extmsg.easy_handle = easy->easy_handle; + msg->extmsg.easy_handle = data; msg->extmsg.data.result = easy->result; result = multi_addmsg(multi, msg); -- cgit v1.2.3