From 662727ca3e2737889e2ab59e98acfae7aab873cf Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Tue, 10 Mar 2009 10:00:06 +0000 Subject: Moved 7.19.2 and older entries from CHANGES to CHANGES.0 (the latter is not shipped in release archives but is only in CVS) --- CHANGES.0 | 1713 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 1712 insertions(+), 1 deletion(-) (limited to 'CHANGES.0') diff --git a/CHANGES.0 b/CHANGES.0 index e2b769714..93134485c 100644 --- a/CHANGES.0 +++ b/CHANGES.0 @@ -6,9 +6,1720 @@ Old Changelog -Changes done to curl and libcurl from 1997 to 2006. The most recent changes are +Changes done to curl and libcurl from 1997 to 2008. The most recent changes are always kept in the CHANGES file. +Version 7.19.2 (13 November 2008) + +Michal Marek (13 Nov 2008) +- Fixed a potential data loss in Curl_client_write() when the transfer is + paused. + +Daniel Stenberg (11 Nov 2008) +- Rainer Canavan filed bug #2255627 + (http://curl.haxx.se/bug/view.cgi?id=2255627) which pointed out that a + program using libcurl's multi interface to download a HTTPS page with a + libcurl built powered by OpenSSL, would easily get silly and instead hand + over SSL details as data instead of the actual HTTP headers and body. This + happened because libcurl would consider the connection handshake done too + early. This problem was introduced at September 22nd 2008 with my fix of the + bug #2107377 + + The correct fix is now instead done within the GnuTLS-handling code, as both + the OpenSSL and the NSS code already deal with this situation in similar + fashion. I added test case 560 in an attempt to verify this fix, but + unfortunately it didn't trigger it even before this fix! + +Yang Tse (11 Nov 2008) +- Related with bug #2230535 (http://curl.haxx.se/bug/view.cgi?id=2230535) + Daniel Fandrich noticed that curl_addrinfo was also missing in the build + process of other four non-configure platforms. Added now. + +Daniel Fandrich (7 Nov 2008) +- The getifaddrs() version of Curl_if2ip() crashed when used on a Linux + system with a TEQL load-balancing device configured, which doesn't + have an address. Thanks to Adam Sampson for spotting this (bug #2234923). + +Yang Tse (6 Nov 2008) +- Merged existing IPv4 and IPv6 Curl_ip2addr functions into a single one + which now also takes a protocol address family argument. + +- Bug #2230535 (http://curl.haxx.se/bug/view.cgi?id=2230535) pointed out a + problem with MSVC 6 makefile that caused a build failure. It was noted that + the curl_addrinfo.obj reference was missing. I took the opportunity to sort + the list in which this was missing. Issue submitted by John Wilkinson. + +Version 7.19.1 (5 November 2008) + +Daniel Stenberg (4 Nov 2008) +- CURLINFO_FILETIME now works for file:// transfers as well + +Daniel Stenberg (3 Nov 2008) +- Bug #2218480 (http://curl.haxx.se/bug/view.cgi?id=2218480) pointed out a + problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL + pointer read. I also took the opportunity to clean up this logic (storing of + the connection's IP address) somewhat as we had it stored in two different + places and ways previously and they are now unified. + +Yang Tse (3 Nov 2008) +- Fix undersized IPv6 address internal buffer. IPv6 address strings longer + than 35 characters would be truncated. + +Daniel Stenberg (2 Nov 2008) +- Daniel Johnson reported and fixed: + + When c-ares isn't enabled, libcurl by default calls getaddrinfo with family + set to PF_UNSPEC which causes getaddrinfo to return all available addresses, + both IPv4 and IPv6. Libcurl then tries each one until it can connect. If the + net connection doesn't support IPv6, libcurl can still fall back to IPv4. + + However, since c-ares doesn't support PF_UNSPEC, when it's used it defaults + to using family=PF_INET6 and therefore only returns IPv6 addresses when AAAA + records are available, even if IPv4 addresses are also available. The effect + is that since my ISP doesn't do IPv6, libcurl can't connect at all to a site + that has AAAA records. It will work if I explicitly use CURL_IPRESOLVE_V4 or + --ipv4 with the curl tool. I discovered this when curl would fail to connect + to seemingly random sites. It turns out they weren't random, they were sites + with AAAA records. + + So now libcurl defaults to PF_INET... until c-ares has been tought to offer + both. + +Yang Tse (31 Oct 2008) +- Tests 558 and 559 are stabilized. These two tests were initially introduced + to aid in the location of a seg-fault which was only triggered on non-debug + builds done with the icc 9.1 Intel compiler. Test 558 does not trigger the + problem, but test 559 does trigger it. As of today, it isn't yet absolutely + clear if it is a compiler optimizer issue or a memory corruption one. + +Yang Tse (30 Oct 2008) +- Use our Curl_addrinfo structure definition to handle address info data even + when a system addrinfo struct is available. Provide and use a wrapper around + systems getaddrinfo function, Curl_getaddrinfo_ex which returns a pointer to + a list of dynamically allocated Curl_addrinfo structs. + + Configure will check freeaddrinfo and getaddrinfo functions and define + preprocessor symbols HAVE_FREEADDRINFO and HAVE_GETADDRINFO when appropriate. + +Daniel Fandrich (29 Oct 2008) +- Fixed a bug that caused a few bytes of garbage to be sent after a + curl_easy_pause() during a chunky upload. Reported by Steve Roskowski. + +Daniel Fandrich (28 Oct 2008) +- Changed the "resolve" test precheck program to verify that an IPv6 socket + can be created before resolving the IPv6 name. In the context of running + a test, it doesn't make sense to run an IPv6 test when a host is resolvable + but IPv6 isn't usable. This should fix failures of test 1085 on hosts with + library and DNS support for IPv6 but where actual use of IPv6 has been + administratively disabled. + +Daniel Fandrich (24 Oct 2008) +- Added experimental support for zlib and OpenSSL on Symbian OS. + +Daniel Fandrich (21 Oct 2008) +- Fixed some problems with SFTP range support to fix test cases 634 through + 637. + +Daniel Fandrich (17 Oct 2008) +- Fixed a compile error reported by Albert Chin on AIX and IRIX when using + GTLS. + +Daniel Stenberg (16 Oct 2008) +- Igor Novoseltsev added CURLOPT_PROXYUSER and CURLOPT_PROXYPASSWORD that then + make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding + these new options is that they have no problems with the colon separator + that the CURLOPT_PROXYUSERPWD option does. + +Daniel Stenberg (15 Oct 2008) +- Pascal Terjan filed bug #2154627 + (http://curl.haxx.se/bug/view.cgi?id=2154627) which pointed out that libcurl + uses strcasecmp() in multiple places where it causes failures when the + Turkish locale is used. This is because 'i' and 'I' isn't the same letter so + strcasecmp() on those letters are different in Turkish than in English (or + just about all other languages). I thus introduced a totally new internal + function in libcurl (called Curl_raw_equal) for doing case insentive + comparisons for english-(ascii?) style strings that thus will make "file" + and "FILE" match even if the Turkish locale is selected. + +Daniel Fandrich (15 Oct 2008) +- A command is considered to have failed if it returns a non-zero + return code. This way, if the precheck command can't be run at all for + whatever reason, it's treated as a precheck failure which causes the + test to be skipped. + +Daniel Stenberg (15 Oct 2008) +- John Wilkinson filed bug #2155496 + (http://curl.haxx.se/bug/view.cgi?id=2155496) pointing out an error case + without a proper human-readable error message. When a read callback returns + a too large value (like when trying to return a negative number) it would + trigger and the generic error message then makes the proplem slightly + different to track down. I've added an error message for this now. + +Daniel Fandrich (9 Oct 2008) +- Fixed the --interface option to work with IPv6 connections on glibc + systems supporting getifaddrs(). Also fixed a problem where an IPv6 + address could be chosen instead of an IPv4 one for --interface when it + involved a name lookup. + +Daniel Fandrich (8 Oct 2008) +- Added tests 1082 through 1085 to test symbolic --interface parameters + +- Added tests 633 through 637 to test the new file range support for SFTP. + All but the first test cause an infinite loop or other failure and so + are added to DISABLED. + +Daniel Stenberg (8 Oct 2008) +- John Wilkinson filed bug #2152270 + (http://curl.haxx.se/bug/view.cgi?id=2152270) which identified and fixed a + CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing: + + Any subsequent transfer with a redirect leaks memory, eventually crashing + the process potentially. + + Any subsequent transfer WITHOUT a redirect causes the most recent redirect + that DID occur on some previous transfer to still be reported. + +- Igor Novoseltsev filed bug #2111613 + (http://curl.haxx.se/bug/view.cgi?id=2111613) that eventually identified a + flaw in how the multi_socket interface in some cases missed to call the + timeout callback when easy interfaces are removed and added within the same + millisecond. + +- Igor Novoseltsev brought a patch that introduced two new options to + curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of + deprecates the good old CURLOPT_USERPWD since they allow applications to set + the user name and password independently and perhaps more importantly allow + both to contain colon(s) which CURLOPT_USERPWD doesn't fully support. + +Daniel Fandrich (7 Oct 2008) +- Changed the handling of read/write errors in Curl_perform() to allow a + a fresh connection to be made in such cases and the request retransmitted. + This should fix test case 160. Added test case 1079 in an attempt to + test a similar connection dropping scenario, but as a race condition, it's + hard to test reliably. + +- Created test cases 1080 and 1081 to reproduce a problem of + CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when + two URLs are requested. Reported by vmpdemo in bug #2152270 + +Daniel Stenberg (7 Oct 2008) +- Fixed CURLINFO_PRIMARY_IP: When libcurl created a connection to host A then + the app re-used the handle to do a connection to host B and then again + re-used the handle to host A, it would not update the info with host A's IP + address (due to the connection being re-used) but it would instead report + the info from host B. + +Yang Tse (7 Oct 2008) +- Added --enable-optimize configure option to enable and disable compiler + optimizations to allow decoupled setting from --enable-debug. + +Yang Tse (2 Oct 2008) +- Added --enable-warnings configure option to enable and disable strict + compiler warnings to allow decoupled setting from --enable-debug. + + runtests.pl will now run with picky compiler warnings enabled unless + explicitly disabled. + +Daniel Fandrich (1 Oct 2008) +- "make clean" now cleans out the docs and tests directories, too. + +Daniel Stenberg (30 Sep 2008) +- The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE + gets a 550 response back for the cases where a download (or NOBODY) is + wanted. It still allows a 550 as response if the SIZE is used as part of an + upload process (like if resuming an upload is requested and the file isn't + there before the upload). I also modified the FTP test server and a few test + cases accordingly to match this modified behavior. + +Daniel Stenberg (29 Sep 2008) +- Daniel Egger provided a patch that allows you to disable proxy support in + libcurl to somewhat reduce the size of the binary. Run configure + --disable-proxy. + +Daniel Fandrich (29 Sep 2008) +- Moved all signal-based name resolution timeout handling into a single new + Curl_resolv_timeout function to reduce coupling. + +Daniel Stenberg (29 Sep 2008) +- Ian Lynagh provided a patch that now makes CURLOPT_RANGE work fine for SFTP + downloads! + +- Maxim Ivanov filed bug report #2107803 + (http://curl.haxx.se/bug/view.cgi?id=2107803) "no CURLINFO_REDIRECT_URL in + multi mode" together with a patch that fixed the problem. + +Daniel Stenberg (25 Sep 2008) +- Emanuele Bovisio submitted bug report #2126435. We fixed the HTTP Digest + auth code to not behave badly when getting a blank realm with + realm="". http://curl.haxx.se/bug/view.cgi?id=2126435 + +Daniel Fandrich (23 Sep 2008) +- Make sure not to dereference the wrong UrlState proto union member when + switching from one protocol to another in a single request (e.g. + redirecting from HTTP to FTP as in test 1055) by resetting + state.expect100header before every request. + +Daniel Stenberg (23 Sep 2008) +- Introducing Jamie Lokier's function for date to epoch conversion used in the + date parser function. This makes our function less dependent on system- + provided functions and instead we do all the magic ourselves. We also no + longer depend on the TZ environment variable. Switching to our own converter + has some side-effect and they are noted here for future reference (taken + from a mail by mr Lokier): + + time_t is not measured in seconds in the ANSI C standard - or even counted + uniformly - weird platforms can use other numeric representations of dates + in time_t - hence the difftime() function. + + On POSIX time_t is measured in UTC seconds, which means not including leap + seconds. But it's mentioned in a few places that some old POSIX-ish + environments include leap seconds in their time_t counts... + + I'm pretty sure [the new implementation is] correct on anything truly POSIX. + And it's obviously a lot less dependent on platform quirks and corner cases + in many ways than the mktime() version. + +- Rob Crittenden brought a patch to "add some locking for thread-safety to NSS + implementation". + +Daniel Stenberg (22 Sep 2008) +- Made the SOCKS code use the new Curl_read_plain() function to fix the bug + Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html + +- recv() errors other than those equal to EAGAIN now cause proper + CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now + disabled it until we can figure out another way to exercise that logic. + +- Michael Goffioul filed bug report #2107377 "Problem with multi + GnuTLS + + proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi + interface using program didn't work when built with GnuTLS and a CONNECT + request was done over a proxy (basically test 502 over a proxy to a HTTPS + site). It turned out the ssl connect function would get called twice which + caused the second call to fail. + +Daniel Fandrich (22 Sep 2008) +- Fixed test 539 to handle an out of memory condition that shows up now + that memdebug.h is included in the test programs. + +Yang Tse (20 Sep 2008) +- Fix regression in configure script which affected OpenSSL builds on MSYS. + +Yang Tse (19 Sep 2008) +- configure script now checks availability of the alarm() function. + +Daniel Fandrich (18 Sep 2008) +- Don't bother to install a SIGALRM handler unless alarm() is available. + Also, leave the existing SIGALRM handler alone if the timeout is too small + to handle. + +Daniel Fandrich (17 Sep 2008) +- Removed reference to curl-ca-bundle.crt in the host verification failure + error message. + +Yang Tse (17 Sep 2008) +- Improve configure detection of gethostname(), localtime_r(), strstr(), + getservbyport_r(), gethostbyaddr_r() and gethostbyname_r(). + +Yang Tse (14 Sep 2008) +- Improve configure detection of strcasecmp(), strcasestr(), strcmpi(), + stricmp(), strlcat(), strncasecmp(), strncmpi() and strnicmp(). + +Yang Tse (13 Sep 2008) +- Disable tracking of fdopen() calls in the low-level memory leak tracking + code when fdopen() is not available, to avoid compiler error. + +Yang Tse (12 Sep 2008) +- Further adjust detection of strerror_r() in the configure process, and + ensure that errno is not modified inside Curl_strerror(). + +Yang Tse (10 Sep 2008) +- Improve detection of gmtime_r(), strtoll(), sigaction(), strtok_r(), + strdup() and ftruncate() in the configure process. + +Daniel Fandrich (9 Sep 2008) +- Mike Revi discovered some swapped speed switches documented in the curl man + page. + +- Checked in some documentation and code improvements and fixes that I + discovered in the FreeBSD ports system. + +Daniel Stenberg (8 Sep 2008) +- Dmitry Kurochkin patched a problem: I have found bug in pipelining through + proxy. I have a transparent proxy. When running with http_proxy environment + variable not set my test completes fine (it goes through transparent + proxy). When I set http_proxy variable my test hangs after the first + downloaded is complete. Looks like the second handle never gets out from + WAITDO state. + + The fix: It makes checkPendPipeline move 1 handler from pend pipe to send + pipe if pipelining is not supported by server but there are no handles in + send and recv pipes. + +- Stefan Krause pointed out that libcurl would wrongly send away cookies to + sites in cases where the cookie clearly has a very old expiry date. The + condition was simply that libcurl's date parser would fail to convert the + date and it would then count as a (timed-based) match. Starting now, a + missed date due to an unsupported date format or date range will now cause + the cookie to not match. + +Daniel Fandrich (5 Sep 2008) +- Improved the logic that decides whether to use HTTP 1.1 features or not in a + request. Setting a specific version with CURLOPT_HTTP_VERSION overrides + all other checks, but otherwise, a 1.0 request will be made if the server + is known to support only 1.0 because it previously responded so and the + connection was kept alive, or a response to a previous request on this handle + came back as 1.0. The latter could take place in cases like redirection or + authentication where several requests have to be made before the operation + is complete. If any one of the servers in a redirection chain supports only + 1.0, then remaining requests will be sent in 1.0 mode. + +- Detect cases where an upload must be sent chunked and the server supports + only HTTP 1.0 and return CURLE_UPLOAD_FAILED. + +Daniel Stenberg (5 Sep 2008) +- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames + CURLOPT_POST301 (but adds a define for backwards compatibility for you who + don't define CURL_NO_OLDIES). This option allows you to now also change the + libcurl behavior for a HTTP response 302 after a POST to not use GET in the + subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the + patch somewhat before commit. The curl tool got a matching --post302 + option. Test case 1076 was added to verify this. + +- Introducing CURLOPT_CERTINFO and the corresponding CURLINFO_CERTINFO. By + enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS + or FTPS), libcurl will gather lots of server certificate info and that info + can then get extracted by a client after the request has completed with + curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing + helped me test and smoothen out this feature. + + Unfortunately, this feature currently only works with libcurl built to use + OpenSSL. + + This feature was sponsored by networking4all.com - thanks! + +- Dmitriy Sergeyev pointed out that curl_easy_pause() didn't unpause properly + during certain conditions. I also changed this code to use realloc() based + on Daniel Fandrich's suggestion. + +Guenter Knauf (4 Sep 2008) +- MingW32 non-configure builds are now largefile feature enabled by default. + NetWare LIBC builds are also now largefile feature enabled by default. + +Yang Tse (4 Sep 2008) +- Several fixes related with print formatting string directives. + +Daniel Fandrich (3 Sep 2008) +- Search for the FreeBSD CA cert file /usr/local/share/certs/ca-root.crt + +Daniel Fandrich (2 Sep 2008) +- Fixed an out of memory problem that caused torture test failures in tests + 706 and 707. + +Daniel Stenberg (2 Sep 2008) +- Keith Mok added supported_protocols and supported_features to the pkg-config + file for libcurl, and while doing that fix he unified with curl-config.in + how the supported protocols and features are extracted and used, so both those + tools should now always be synced. + +Version 7.19.0 (1 September 2008) + +Daniel Fandrich (29 Aug 2008) +- Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1 + to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072 + and 1073 are similar to test 1069 in that they involve the impossible + scenario of sending chunked data to a HTTP 1.0 server. All these fail + and are added to DISABLED. + +- Added test 1075 to test --anyauth with Basic authentication. + +Daniel Stenberg (29 Aug 2008) +- When libcurl was doing a HTTP POST and the server would respond with + "Connection: close" and actually close the connection after the + response-body, libcurl could still have outstanding data to send and it + would not properly notice this and stop sending. This caused weirdness and + sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222 + + Note that there are still reasons to consider libcurl's behavior when + getting a >= 400 response code while sending data, as Craig Perras' note + "http upload: how to stop on error" specifies: + http://curl.haxx.se/mail/archive-2008-08/0138.html + +Daniel Stenberg (28 Aug 2008) +- Dengminwen reported that libcurl would lock a (cookie) share twice (without + an unlock in between) for a certain case and that in fact works when using + regular windows mutexes but not with pthreads'! Locks should of course not + get locked again so this is now fixed. + http://curl.haxx.se/mail/lib-2008-08/0422.html + +- I'm abandoning the system with the web site mirrors (but keeping download + files bing mirrored) and thus I've changed the URL in the cookiejar header + to no longer use curlm.haxx.se but instead use the main site curl.haxx.se + +Daniel Fandrich (27 Aug 2008) +- Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to set + the HTTP method to GET (or HEAD) when given a value of 0. + +- Added test cases 1068 and 1069 to test a simple HTTP PUT from stdin. Test + case 1069 fails in a similar manner to test 1065 so is added to DISABLED. + +Yang Tse (27 Aug 2008) +- Fix generation of MS VC6 .dsp file to make it support compilation of either + dynamic (DLL) or static (LIB) libcurl libraries in debug and release modes. + +Daniel Fandrich (26 Aug 2008) +- Fixed out of memory problems that caused torture test failures in tests + 1021 and 1067. + +Yang Tse (26 Aug 2008) +- Added check and symbol definition for WIN32 file API usage in configure, + supporting configure's --disable-largefile option for WIN32 targets also. + +- Non-configure systems which do not use config-win32.h configuration file, + and want to use the WIN32 file API, must define USE_WIN32_LARGE_FILES or + USE_WIN32_SMALL_FILES as appropriate in their own configuration files. + +Daniel Stenberg (23 Aug 2008) +- Running 'make ca-firefox' in the root build dir will now run the new + firefox-db2pem.sh conversion script that converts a local Firefox db of ca + certs into PEM format, suitable for use with a OpenSSL or GnuTLS built + libcurl. + +- Constantine Sapuntzakis fixed a bug when doing proxy CONNECT with the multi + interface, and the proxy would send Connection: close during the + authentication phase. http://curl.haxx.se/bug/view.cgi?id=2069047 + +Daniel Fandrich (22 Aug 2008) +- Fixed a problem when --dump-header - was given with more than one URL, + which caused an error when the second header was dumped due to stdout + being closed. Added test case 1066 to verify. Also fixed a potential + problem where a closed file descriptor might be used for an upload + when more than one URL is given. + +Yang Tse (22 Aug 2008) +- Improved libcurl's internal curl_m*printf() functions integral data type + size and signedness handling. + +- Internal adjustments to better select/differentiate when large/small file + support is provided using WIN32 functions directly. + +Daniel Fandrich (20 Aug 2008) +- Added an edited version of Vincent Le Normand's documentation of SFTP quote + commands to the man pages. + +Daniel Stenberg (20 Aug 2008) +- Phil Pellouchoud pointed out that the windows version of libcurl had a + memory leak because it never called the OpenSSL function + CRYPTO_cleanup_all_ex_data() as it was supposed to. This was because of a + missing define in config-win32.h! + +Gisle Vanem (18 Aug 2008) +- Updated lib/Makefile.Watcom with the option to use c-ares (USE_ARES=1). + +Yang Tse (18 Aug 2008) +- Added test case 557 to verify libcurl's internal curl_m*printf() functions + formatting functionality when handling signed and unsigned longs, as well as + our curl_off_t data type. + +Yang Tse (17 Aug 2008) +- OpenSSl enabled NetWare builds are changed to use the 'openssl' subdirectory + when including the OpenSSL header files. This is the recommended setting, this + prevents the undesired inclusion of header files with the same name as those + of OpenSSL but which do not belong to the OpenSSL package. The visible change + from previously released libcurl versions is that now OpenSSl enabled NetWare + builds also define USE_OPENSSL in config files, and that OpenSSL header files + must be located in a subdirectory named 'openssl'. + +Yang Tse (16 Aug 2008) +- Library internal only C preprocessor macros FORMAT_OFF_T and FORMAT_OFF_TU + remain in use as internal curl_off_t print formatting strings for the internal + *printf functions which still cannot handle print formatting string directives + such as "I64d", "I64u", and others available on MSVC, MinGW, Intel's ICC, and + other DOS/Windows compilers. + +Daniel Fandrich (15 Aug 2008) +- Added test case 1063 to test invalid long file ranges with file: URLs and + 1064 to test multiple http PUTs. + +- Added test case 1065 to test a PUT with a single file but two URLs. This + was discovered to be problematic while investigating an incident reported by + Von back in May. curl in this case doesn't include a Content-Length: or + Transfer-Encoding: chunked header which is illegal. This test case is + added to DISABLED until a solution is found. + +Yang Tse (15 Aug 2008) +- C preprocessor macros used internally and equally available externally which + aid in the use of the curl_off_t data type are named: CURL_FORMAT_CURL_OFF_T, + CURL_FORMAT_CURL_OFF_TU, CURL_SIZEOF_CURL_OFF_T, CURL_SUFFIX_CURL_OFF_T, + CURL_SUFFIX_CURL_OFF_TU, CURL_OFF_T_C and CURL_OFF_TU_C. + +Yang Tse (13 Aug 2008) +- The size of long is a build time characteristic and as such it is now recorded + in curlbuild.h as CURL_SIZEOF_LONG. Definition now done from configure process + and in CVS curlbuild.h.dist for non-configure systems. + +Daniel Fandrich (12 Aug 2008) +- Fixed a buffer overflow problem in Curl_proxyCONNECT that could occur + when a server responded with long headers and data. Luckily, the buffer + overflowed into another unused buffer, so no actual harm was done. + Added test cases 1060 and 1061 to verify. + +Daniel Stenberg (12 Aug 2008) +- Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel + _directory_ if that happened to appear in the path! + +Yang Tse (12 Aug 2008) +- Added macros for minimum-width signed and unsigned curl_off_t integer + constants CURL_OFF_T_C and CURL_OFF_TU_C. The clever double helper macro + used internally to provide its functionality is thanks to Lars Nilsson. + +Daniel Fandrich (11 Aug 2008) +- Fixed a boundary condition error in ftp_readresp() whereby a non-terminal + line of a multiline FTP response whose last byte landed exactly at the end + of the BUFSIZE-length buffer would be treated as the terminal response + line. The following response code read in would then actually be the + end of the previous response line, and all responses from then on would + correspond to the wrong command. Test case 1062 verifies this. + +- Stop closing a never-opened ftp socket. + +Daniel Stenberg (11 Aug 2008) +- Constantine Sapuntzakis filed bug report #2042430 + (http://curl.haxx.se/bug/view.cgi?id=2042430) with a patch. "NTLM Windows + SSPI code is not thread safe". This was due to libcurl using static + variables to tell wether to load the necessary SSPI DLL, but now the loading + has been moved to the more suitable curl_global_init() call. + +- Constantine Sapuntzakis filed bug report #2042440 + (http://curl.haxx.se/bug/view.cgi?id=2042440) with a patch. He identified a + problem when using NTLM over a proxy but the end-point does Basic, and then + libcurl would do wrong when the host sent "Connection: close" as the proxy's + NTLM state was erroneously cleared. + +Yang Tse (11 Aug 2008) +- Added missing signed and unsigned curl_off_t integer constant suffixes for + internal and external use. CURL_SUFFIX_CURL_OFF_T, CURL_SUFFIX_CURL_OFF_TU. + +Daniel Fandrich (7 Aug 2008) +- Fixed an uninitialized variable in multi_runsingle() that could cause a + request to prematurely end. + +- Added test1059 to test the FTP proxy tunnel problem fixed July 11. + +Yang Tse (7 Aug 2008) +- Added curlbuild.h and curlrules.h header files to libcurl's public headers. + File curlbuild.h is a generated file on configure-capable systems. This is + a first step towards configure-based info in public headers. Currently only + used to provide support for a curl_off_t data type which is not gated to + off_t. Further details are documented inside these mentioned header files. + +- Fix CURL_CHECK_DEF so that when the expansion of the preprocessor symbol + results in a set of double-quoted strings, this macro will now return an + expansion which consists of a single double-quoted string as the result of + concatenating all of them. + +- Skip data type check in DO_CURL_OFF_T_CHECK macro when argument is empty. + +- Adjusted testcurl.pl to copy checked out curlbuild.h.dist as curlbuild.h + for non-configure targets when the host system doesn't run buildconf.bat. + +- Prevent buildconf from removing 'Makefile' and 'missing' files. This would + blow away our CVS checked files 'missing' and 'hiper/Makefile'. + +- Remove adjustment done to testcurl.pl to verify if change introduced by + Guenter Knauf in lib/Makefile.netware is enough to get the netware autobuilds + going again. + +Yang Tse (5 Aug 2008) +- Changes done to buildconf script. Validate that autom4te and autoconf, as + well as aclocal and automake, versions match. Improve removal of previous + run generated files. Remove verbose debug logging of aclocal on Solaris. + +Daniel Stenberg (5 Aug 2008) +- Yehoshua Hershberg found a problem that would make libcurl re-use a + connection with the multi interface even if a previous use of it caused a + CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed + SSL connections properly close the connections. + +Daniel Stenberg (4 Aug 2008) +- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and + proved how PUT and POST with a redirect could lead to a "hang" due to the + data stream not being rewound properly when it had to in order to get sent + properly (again) to the subsequent URL. This is now fixed and these test + cases are no longer disabled. + +Yang Tse (4 Aug 2008) +- Autoconf 2.62 has changed the behaviour of the AC_AIX macro which we use. + Prior versions of autoconf defined _ALL_SOURCE if _AIX was defined. 2.62 + version of AC_AIX defines _ALL_SOURCE and other four preprocessor symbols + no matter if the system is AIX or not. To keep the traditional behaviour, + and an uniform one across autoconf versions AC_AIX is replaced with our + own internal macro CURL_CHECK_AIX_ALL_SOURCE. + +Daniel Stenberg (4 Aug 2008) +- Test case 1041 (added by Daniel Fandrich July 14th) proved a bug where PUT + with -C - sent garbage in the Content-Range: header. I fixed this problem by + making sure libcurl always sets the size of the _entire_ upload if an app + attemps to do resumed uploads since libcurl simply cannot know the size of + what is currently at the server end. Test 1041 is no longer disabled. + +Yang Tse (2 Aug 2008) +- No longer test availability of the gdi32 library, nor use it for linking, even + when we have been doing this since revision 1.47 of configure.ac 4 years and + 5 months ago when cross-compiling a Windows target. We actually don't use any + function from the Windows GDI (Graphics Device Interface) related with drawing + or graphics-related operations. + +Daniel Fandrich (1 Aug 2008) +- Added support for --append on SFTP uploads. Unfortunately, OpenSSH doesn't + support this so it goes untested. + +Yang Tse (1 Aug 2008) +- Configure process now checks if the preprocessor _REENTRANT symbol is already + defined. If it isn't currently defined a set of checks are performed to test + if its definition is required to make visible to the compiler a set of *_r + functions. Finally, if _REENTRANT is already defined or needed it takes care + of making adjustments necessary to ensure that it is defined equally for the + configure process tests and generated config file. + +- Removed definition of CURL_CHECK_WORKING_RESOLVER from acinclude.m4 it has + not been in use since revision 1.81 of configure.in 6 years, 9 months ago. + +Daniel Fandrich (31 Jul 2008) +- Fixed parsing of an IPv6 proxy address to support a scope identifier, + as well as IPv4 addresses in IPv6 format. Also, better handle the case + of a malformatted IPv6 address (avoid empty and NULL strings). + +- Fixed a problem with any FTP URL or any URLs containing an IPv6 address + being mangled when passed to proxies when CURLOPT_PORT is also set + (reported by Pramod Sharma). + +- User names embedded in proxy URLs without a password were parsed + incorrectly--the host name is treated as part of the user name and the + port number becomes the password. This can be observed in test 279 + (was KNOWN_ISSUE #54). + +Daniel Stenberg (30 Jul 2008) +- Phil Blundell added the CURLOPT_ADDRESS_SCOPE option, as well as adjusted + the URL parser to allow numerical IPv6-addresses to be specified with the + scope given, as per RFC4007 - with a percent letter that itself needs to be + URL escaped. For example, for an address of fe80::1234%1 the HTTP URL is: + "http://[fe80::1234%251]/" + +- PHP's bug report #43158 (http://bugs.php.net/bug.php?id=43158) identifies a + true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or + less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that + would set it to something non-zero would return before the assign in almost + all error cases. The internal variable is now set to non-zero from the start + of the function only to get cleared later on if things work out fine. + +- Made the curl tool's -w option support the %{ssl_verify_result} variable + +Daniel Fandrich (30 Jul 2008) +- Added test cases 1052 through 1055 to test uploading data from files + during redirects. Test cases 1052 and 1055 show problems (maybe the same + root cause as 1051) and are disabled. + +- Fixed a couple of buffer overflows in the MS-DOS port of the curl tool. + +Daniel Fandrich (29 Jul 2008) +- Fixed --use-ascii to properly convert text files on Symbian OS, MS-DOS + and OS/2. + +- Added test case 1051 to test Location: following with PUT, as reported + by Ben Sutcliffe. The test when run manually shows a problem in curl + so it's disabled. + +Daniel Fandrich (28 Jul 2008) +- Fixed display of the interface bind address in the trace output when it's + an IPv6 address. + +- Added test cases 1045 through 1049 as simple tests of --interface using the + localhost interface. + +- Added test case 1050 to test --ftp-port with an IPv6 address + +Daniel Stenberg (26 Jul 2008) +- David Bau filed bug report #2026240 "CURL_READFUNC_PAUSE leads to buffer + overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two + problems, and providing the fix for them: + + - CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is + designed for but paused _receiving_ of data! + + - libcurl didn't internally set the read counter to zero when this return + code was detected, which would potentially lead to junk getting sent to + the server. + +Daniel Fandrich (26 Jul 2008) +- Added test 1044 to test large file support in ftp with -I. + +- Eliminate a unnecessary socket creation in Curl_getaddrinfo for an IPv4 + address in an IPv6 capable libcurl. + +- Added feature in runtests.pl to select tests based on key word. + +Daniel Fandrich (23 Jul 2008) +- Changed the long logfile elision code in runtests.pl to properly handle + lines ending in \r. + +- Changed references to TRUE and FALSE in the curl_easy_setopt man page to + 1 and zero, respectively, since TRUE and FALSE aren't part of the + libcurl API. + +Daniel Stenberg (23 Jul 2008) +- I went over the curl_easy_setopt man page and replaced most references to + non-zero with the fixed value of 1. We should strive at making options + support '1' for enabling them mentioned explicitly, as that then will allow + us for to extend them in the future without breaking older programs. + + Possibly we should even introduce a fancy define to use instead of '1' all + over... + +Yang Tse (21 Jul 2008) +- Use the sreadfrom() wrapper to replace recvfrom() in our code. + +Yang Tse (20 Jul 2008) +- when recvfrom prototype uses a void pointer for arguments 2, 5 or 6 this will + now cause the definition, as appropriate, of RECVFROM_TYPE_ARG2_IS_VOID, + RECVFROM_TYPE_ARG5_IS_VOID or RECVFROM_TYPE_ARG6_IS_VOID. + +Yang Tse (17 Jul 2008) +- RECVFROM_TYPE_ARG2, RECVFROM_TYPE_ARG5 and RECVFROM_TYPE_ARG6 are now defined + to the data type pointed by its respective argument and not the pointer type. + +Yang Tse (16 Jul 2008) +- Configure process now checks availability of recvfrom() socket function and + finds out its return type and the types of its arguments. Added definitions + for non-configure systems config files, and introduced macro sreadfrom which + will be used on udp sockets as a recvfrom() wrapper. + +Yang Tse (15 Jul 2008) +- Added description/comment to include paths used in several Makefile.am files. + Added automake option nostdinc to test servers makefile and modified libcurl + external headers include path for libtest programs. + +Daniel Fandrich (14 Jul 2008) +- Added test1040 through test1043 to test -C - on HTTP. Test 1041 failed so + it's added to DISABLED. + +Yang Tse (14 Jul 2008) +- HTTP_ONLY definition check in lib/setup.h is now done once that configuration + file has been included. In this way if symbol is defined in the config file + it will no longer be ignored. Removed inclusion of remaining system header + files from configuration files. Moved _REENTRANT definition up/earlier in + lib/setup.h + +Yang Tse (11 Jul 2008) +- Added missing multiple header inclusion prevention definition for header + file content_encoding.h + +Daniel Fandrich (11 Jul 2008) +- Fixed test 553 to pass the torture test. + +Daniel Stenberg (11 Jul 2008) +- Daniel Fandrich found out we didn't pass on the user-agent properly when + doing "proxy-tunnels" with non-HTTP prototols and that was simply because + the code assumed the user-agent was only needed for HTTP. + +Daniel Fandrich (10 Jul 2008) +- Changed slightly the SFTP quote commands chmod, chown and chgrp to only + set the attribute that has changed instead of all possible ones. Hopefully, + this will solve the "Permission denied" problem that Nagarajan Sreenivasan + reported when setting some modes, but regardless, it saves a protocol + round trip in the chmod case. + +- Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp + uploads with -C - didn't resume properly, but the tests pass. + +Yang Tse (10 Jul 2008) +- Peter Lamberg filed bug report #2015126: "poll gives WSAEINVAL when POLLPRI + is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126) which + exactly pinpointed the problem only triggered on Windows Vista, provided + reference to docs and also a fix. There is much work behind Peter Lamberg's + excellent bug report. Thank You! + +Daniel Fandrich (9 Jul 2008) +- Added tests 1036 and 1037 to verify resumed ftp downloads with -C - + +Daniel Stenberg (9 Jul 2008) +- Andreas Schuldei improved Phil Blundell's patch for IPv6 using c-ares, and I + edited it slightly. Now you should be able to use IPv6 addresses fine even + with libcurl built to use c-ares. + +Daniel Fandrich (9 Jul 2008) +- Fixed an OOM handling problem that cause test 11 to fail the torture test. + +Daniel Fandrich (8 Jul 2008) +- Fixed test 554 to pass the torture test. + +Daniel Fandrich (7 Jul 2008) +- Added test cases 1034 & 1035 to test IDN name conversion failures. + +Daniel Stenberg (7 Jul 2008) +- Scott Barrett provided a test case for a segfault in the FTP code and the + fix for it. It occured when you did a FTP transfer using + CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but + switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being + cleared properly. Scott's test case is now known as test 539 and it + verifies the fix. + +Daniel Stenberg (3 Jul 2008) +- Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx + response codes. Previously libcurl would hang on such occurances. I added + test case 1033 to verify. + +- Introcuding a new timestamp for curl_easy_getinfo(): + CURLINFO_APPCONNECT_TIME. This is set with the "application layer" + handshake/connection is completed. Which typically is SSL, TLS or SSH and by + using this you can figure out the application layer's own connect time. You + can extract the time stamp using curl's -w option and the new variable named + 'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar. + +Daniel Fandrich (2 Jul 2008) +- Support Open Watcom C on Linux (as well as Windows). + +Yang Tse (2 Jul 2008) +- The previously committed fix for bug report #1999181 prevented using the + monotonic clock on any system without an always supported POSIX compliant + implementation. Now the POSIX compliant configuration check is removed and + will fallback to gettimeofday when the monotonic clock is unavailable at + run-time. + +- The configure process will now halt when sed, grep, egrep or ar programs + can not be found among the directories in PATH variable. + +Daniel Stenberg (1 Jul 2008) +- Rolland Dudemaine provided fixes to get libcurl to build for the INTEGRITY + operating system. + +Daniel Stenberg (30 Jun 2008) +- Made the internal printf() support %llu properly to print unsigned long longs. + +- Stephen Collyer and Tor Arntsen helped identify a flaw in the range code + which output the range using a signed variable where it should rather use + unsigned. + +Yang Tse (29 Jun 2008) +- John Lightsey filed bug report #1999181: "CLOCK_MONOTONIC always fails on + some systems" (http://curl.haxx.se/bug/view.cgi?id=1999181). The problem was + that the configure script did not use the _POSIX_MONOTONIC_CLOCK feature test + macro when checking monotonic clock availability. This is now fixed and the + monotonic clock will not be used unless the feature test macro is defined + with a value greater than zero indicating always supported. + +Daniel Fandrich (25 Jun 2008) +- Honour --stderr with the -v option. + +- Fixed a file handle leak in the command line client if more than one + --stderr option was given. + +Daniel Stenberg (22 Jun 2008) +- Eduard Bloch filed the debian bug report #487567 + (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that + libcurl used Content-Range: instead of Range when doing a range request with + --head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to + verify. + +Daniel Fandrich (21 Jun 2008) +- Stopped using ranges in scanf character sequences (e.g. %[a-z]) since that + is not ANSI C, just a common extension. This caused problems on + at least Open Watcom C. + +Yang Tse (20 Jun 2008) +- Modified configuration script to actually verify if the compiler is good + enough at detecting compilation errors or at least it has been properly + configured to do so. Configuration heavily depends on this capability, so + if this compiler sanity check fails the configuration process will now fail. + +Daniel Stenberg (20 Jun 2008) +- Phil Pellouchoud found a case where libcurl built with NSS failed to + handshake with a SSLv2 server, and it turned out to be because it didn't + recognize the cipher named "rc4-md5". In our list that cipher was named + plainly "rc4". I've now added rc4-md5 to work as an alias as Phil reported + that it made things work for him again. + +- Hans-Jurgen May pointed out that trying SCP or SFTP over a SOCKS proxy + crashed libcurl. This is now addressed by making sure we use "plain send" + internally when doing the socks handshake instead of the Curl_write() + function which is designed to use the "target" protocol. That's then SCP or + SFTP in this case. I also took the opportunity and cleaned up some ssh- + related #ifdefs in the code for readability. + +Daniel Stenberg (19 Jun 2008) +- Christopher Palow fixed a curl_multi_socket() issue which previously caused + libcurl to not tell the app properly when a socket was closed (when the name + resolve done by c-ares is completed) and then immediately re-created and put + to use again (for the actual connection). Since the closure will make the + "watch status" get lost in several event-based systems libcurl will need to + tell the app about this close/re-create case. + +- Dengminwen found a bug in the connection re-use function when using the + multi interface with pipelining enabled as it would wrongly check for, + detect and close "dead connections" even though that connection was already + in use! + +Daniel Fandrich (18 Jun 2008) +- Added SSH failure test cases 628-632 + +- Fixed a memory leak in the command-line tool that caused a valgrind error. + +Daniel Stenberg (18 Jun 2008) +- Rob Crittenden brought a fix for the NSS layer that makes libcurl no longer + always fire up a new connection rather than using the existing one when the + multi interface is used. Original bug report: + https://bugzilla.redhat.com/show_bug.cgi?id=450140 + +Yang Tse (18 Jun 2008) +- Internal configure script improvement. No longer break out of shell "for" + statements from inside AC_FOO_IFELSE macros, otherwise temporary macro files + are not properly removed. + +Daniel Fandrich (12 Jun 2008) +- Fixed curl-config --ca which wasn't being exported by configure. + +Daniel Stenberg (11 Jun 2008) +- I did a cleanup of the internal generic SSL layer and how the various SSL + libraries are supported. Starting now, each underlying SSL library support + code does a set of defines for the 16 functions the generic layer (sslgen.c) + uses (all these new function defines use the prefix "curlssl_"). This + greatly simplified the generic layer in readability by involving much less + #ifdefs and other preprocessor stuff and should make it easier for people to + make libcurl work with new SSL libraries. + + Hopefully I can later on document these 16 functions somewhat as well. + + I also made most of the internal SSL-dependent functions (using Curl_ssl_ + prefix) #defined to nothing when no SSL support is requested - previously + they would unnecessarily call mostly empty functions. + + I've built libcurl with OpenSSL and GnuTLS and without SSL to test this and + I've also tried building with NSS but the NSS support is a mystery to me and + I failed to build libcurl with the NSS libraries I have installed. We really + should A) improve our configure script to detect unsuitable NSS versions + already at configure time and B) document our requirements better for the + SSL libraries. + +Daniel Stenberg (10 Jun 2008) +- I made the OpenSSL code build again with OpenSSL 0.9.6. The CRLFILE + functionality killed it due to its unconditional use of + X509_STORE_set_flags... + +Daniel Stenberg (8 Jun 2008) +- Due to the three new libcurl changes and the massive command line option + change I decided we'll mark it by bumping the next release number to 7.19.0! + +- curl the tool now deals with its command line options somewhat differently! + All boolean options (such as -O, -I, -v etc), both short and long versions, + now always switch on/enable the option named. Using the same option multiple + times thus make no difference. To switch off one of those options, you need + to use the long version of the option and type --no-OPTION. Like to disable + verbose mode you use --no-verbose! + +- Added --remote-name-all to curl, which if used changes the default for all + given URLs to be dealt with as if -O is used. So if you want to disable that + for a specific URL after --remote-name-all has been used, you muse use -o - + or --no-remote-name. + +Daniel Stenberg (6 Jun 2008) +- Axel Tillequin and Arnaud Ebalard added support for CURLOPT_ISSUERCERT, for + OpenSSL, NSS and GnuTLS-built libcurls. + +- Axel Tillequin and Arnaud Ebalard added support for CURLOPT_CRLFILE, for + OpenSSL, NSS and GnuTLS-built libcurls. + +- Added CURLINFO_PRIMARY_IP as a new information retrievable with + curl_easy_getinfo. It returns a pointer to a string with the most recently + used IP address. Modified test case 500 to also verify this feature. The + implementing of this feature was sponsored by Lenny Rachitsky at NeuStar. + +Version 7.18.2 (4 June 2008) + +Daniel Fandrich (3 Jun 2008) +- Fixed a problem where telnet data would be lost if an EWOULDBLOCK + condition were encountered. + +Marty Kuhrt (1 Jun 2008) +- Updated main.c to return CURLE_OK if PARAM_HELP_REQUESTED was returned + from getparameter instead of CURLE_FAILED_INIT. No point in returning + an error if --help or --version were requested. + +Daniel Stenberg (28 May 2008) +- Emil Romanus found a problem and helped me repeat it. It occured when using + the curl_multi_socket() API with HTTP pipelining enabled and could lead to + the pipeline basically stalling for a very long period of time until it took + off again. + +- Jeff Weber reported memory leaks with aborted SCP and SFTP transfers and + provided excellent repeat recipes. I fixed the cases I managed to reproduce + but Jeff still got some (SCP) problems even after these fixes: + http://curl.haxx.se/mail/lib-2008-05/0342.html + +Daniel Stenberg (26 May 2008) +- Bug report #1973352 (http://curl.haxx.se/bug/view.cgi?id=1973352) identified + how the HTTP redirect following code didn't properly follow to a new URL if + the new url was but a query string such as "Location: ?moo=foo". Test case + 1031 was added to verify this fix. + +- Andreas Faerber and Scott McCreary made (lib)curl build for the Haiku OS. + +Yang Tse (26 May 2008) +- David Rosenstrauch reported that header files spnegohelp.h and + openssl/objects.h were needed to compile SPNEGO support. + +Daniel Fandrich (22 May 2008) +- Made sure to pass longs in to curl_easy_setopt where necessary in the + example programs and libtest code. + +Daniel Stenberg (19 May 2008) +- When trying to repeat a multi interface problem I fell over a few multi + interface problems: + + o with pipelining disabled, the state should never be set to WAITDO but + rather go straight to DO + + o we had multiple states for which the internal function returned no socket + at all to wait for, with the effect that libcurl calls the socket callback + (when curl_multi_socket() is used) with REMOVE prematurely (as it would be + added again within very shortly) + + o when in DO and DOING states, the HTTP and HTTPS protocol handler functions + didn't return that the socket should be waited for writing, but instead it + was treated as if no socket was needing monitoring so again REMOVE was + called prematurely. + +Daniel Stenberg (13 May 2008) +- Added test case 556 that uses curl_easy_send() and curl_easy_recv() + +Daniel Stenberg (9 May 2008) +- Introducing curl_easy_send() and curl_easy_recv(). They can be used to send + and receive data over a connection previously setup with curl_easy_perform() + and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to + show how they can be used. + +Yang Tse (9 May 2008) +- Internal time differences now use monotonic time source if available. + This also implies the removal of the winmm.lib dependency for WIN32. + +Daniel Stenberg (9 May 2008) +- Stefan Krause reported a busy-looping case when using the multi interface + and doing CONNECT to a proxy. The app would then busy-loop until the proxy + completed its response. + +Michal Marek (9 May 2008) +- Make Curl_write and it's callees accept a const pointer, in preparation + of tetetest's patch for curl_easy_send() + +Daniel Stenberg (7 May 2008) +- Liam Healy filed the debian bug report #480044 + (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=480044) identifying a + segfault when using krb5 ftp, but the krb4 code had the same problem. + +Yang Tse (7 May 2008) +- Christopher Palow provided the patch (edited by me) that introduces the + use of microsecond resolution keys for internal splay trees. + +Daniel Stenberg (4 May 2008) +- Yuriy Sosov pointed out a configure fix for detecting c-ares when that is + built debug-enabled. + +Daniel Stenberg (3 May 2008) +- Ben Van Hof filed bug report #1945240: "libcurl sometimes sends body twice + when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240). + The problem was that when libcurl rewound a stream meant for upload when it + would prepare for a second request, it could accidentally continue the + sending of the rewound data on the first request instead of on the second. + Ben also provided test case 1030 that verifies this fix. + +Daniel Stenberg (3 May 2008) +- Jean-Francois Bertrand reported a libcurl crash with CURLOPT_TCP_NODELAY + since libcurl used getprotobyname() and that isn't thread-safe. We now + switched to use IPPROTO_TCP unconditionally, but perhaps the proper fix is + to detect the thread-safe version of the function and use that. + http://curl.haxx.se/mail/lib-2008-05/0011.html + +Daniel Stenberg (1 May 2008) +- Bart Whiteley provided a patch that made libcurl work properly when an app + uses the CURLOPT_OPENSOCKETFUNCTION callback to create a unix domain socket + to a http server. + +Daniel Stenberg (29 Apr 2008) +- To make it easier for applications that want lots of magic stuff done on + redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now + introduce the new CURLINFO_REDIRECT_URL option that lets applications + extract the URL libcurl would've redirected to if it had been told to. This + then enables the application to continue to that URL as it thinks is + suitable, without having to re-implement the magic of creating the new URL + from the Location: header etc. Test 1029 verifies it. + +Yang Tse (29 Apr 2008) +- Improved easy interface resolving timeout handling in c-ares enabled builds + +Daniel Fandrich (28 Apr 2008) +- Added test 1028 to test an HTTP redirect to a FTP URL. + +Daniel Stenberg (28 Apr 2008) +- Norbert Frese filed bug report #1951588: "Problem with curlftpfs and + libcurl" (http://curl.haxx.se/bug/view.cgi?id=1951588) which seems to be an + identical report to what Denis Golovan reported in + http://curl.haxx.se/mail/lib-2008-02/0108.html The FTP code didn't reset the + user/password pointers properly even though there might've been a new + struct/cconnection getting used. + +Daniel Stenberg (26 Apr 2008) +- Reverted back to use automake 1.9.6 in the next release (from automake + 1.10.1) since it *still* suffers from Solaris-related bugs. Our previous + automake 1.10 problem was reported in bug #1701360 + (http://curl.haxx.se/bug/view.cgi?id=1701360) and this recent problem was + bug #1944825 (http://curl.haxx.se/bug/view.cgi?id=1944825). I have not + personally approached the automake team about either one of these but I + figure we need a Solaris 10 guy to do it! + +Yang Tse (25 Apr 2008) +- Added 'timeout' and 'delay' attributes support for the test harness + subsection. + +Daniel Fandrich (24 Apr 2008) +- Made --stderr able to redirect all stderr messages. + +Yang Tse (23 Apr 2008) +- Improve synchronization between test harness runtests.pl script + and test harness servers to minimize risk of false test failures. + +Daniel Fandrich (22 Apr 2008) +- Added support for running on Symbian OS. + +Daniel Fandrich (18 Apr 2008) +- Added test cases 1026 and 1027 to do some rudimentary tests on the --manual + and --help options. + +Michal Marek (14 Apr 2008) +- allow disabling the typechecker by defining CURL_DISABLE_TYPECHECK, as + discussed in http://curl.haxx.se/mail/lib-2008-04/0291.html + +Daniel Stenberg (14 Apr 2008) +- Stefan Krause reported a case where the OpenSSL handshake phase wasn't + properly acknowledging the timeout values, like if you pulled the network + plug in the midst of it. + +- Andre Guibert de Bruet fixed a second case of not checking the malloc() + return code in the Negotiate code. + +- Sandor Feldi reported bug #1942022 + (http://curl.haxx.se/bug/view.cgi?id=1942022) pointing out a mistake in the + lib/Makefile.vc[68] makefiles' release-ssl-dll target. + +- Brock Noland reported that curl behaved differently depending on which order + you used -i and -I. + +Daniel Stenberg (12 Apr 2008) +- Andre Guibert de Bruet found and fixed a case where malloc() was called but + was not checked for a NULL return, in the Negotiate code. + +Daniel Fandrich (9 Apr 2008) +- Added test cases 1024 & 1025 to test a scenario similar to the one reported + by Ben Combee where libcurl would send the wrong cookie to a redirected + server. libcurl was doing the right thing in these test cases. + +Michal Marek (7 Apr 2008) +- Fix the MIT / Heimdal check for good: + Define HAVE_GSSMIT if are + available, otherwise define HAVE_GSSHEIMDAL if is available. + + Only define GSS_C_NT_HOSTBASED_SERVICE to gss_nt_service_name if + GSS_C_NT_HOSTBASED_SERVICE isn't declared by the gssapi headers. This should + avoid breakage in case we wrongly recognize Heimdal as MIT again. + +Daniel Stenberg (5 Apr 2008) +- Alexey Simak fixed curl_easy_reset() to reset the max redirect limit properly + +- Based on the Debian bug report #474224 that complained about the FTP error + message when libcurl doesn't get a 220 back immediately on connect, I now + changed it to be more specific on what the problem is. Also worth noticing: + while the bug report contains an example where the response is: + + 421 There are too many connected users, please try again later + + we cannot assume that the error message will always be this readable nor + that it fits within a particular boundary etc. + +Daniel Fandrich (3 Apr 2008) +- Added test627 to test SFTP with CURLOPT_NOBODY + +Daniel Stenberg (3 Apr 2008) +- Setting CURLOPT_NOBODY to FALSE will now switch the HTTP request method to + GET simply because previously when you set CURLOPT_NOBODY to TRUE first and + then FALSE you'd end up in a broken state where a HTTP request would do a + HEAD by still act a lot like for a GET and hang waiting for the content etc. + +- Scott Barrett added support for CURLOPT_NOBODY over SFTP + +Daniel Fandrich (3 Apr 2008) +- Made sure that curl_global_init is called in all the multithreaded + example programs. + +Michal Marek (31 Mar 2008) +- Removed the generated ca-bundle.h file. The verbatim value of $ca and + $capath is known to configure, so it can be defined in config.h instead. + +Daniel Stenberg (31 Mar 2008) +- Added CURLFORM_STREAM as a supported option to curl_formadd() to allow an + application to provide data for a multipart with the read callback. Note + that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the + stream option is used. This feature is verified by the new test case + 554. This feature was sponsored by Xponaut. + +Daniel Fandrich (30 Mar 2008) +- Changed the makefile so the doc/examples/ programs are never built in a + normal build/install (only with the 'make check' target), so that a + build failure in the examples isn't fatal. + +Version 7.18.1 (30 March 2008) + +Daniel Stenberg (28 Mar 2008) +- Stephen Collyer pointed out that configure --with-libssh2 without a given + path didn't work properly. + +Daniel Stenberg (27 Mar 2008) +- As found out and reported by Dan Petitt, libcurl didn't show progress/call + the progress callback for the first (potentially huge) piece of body data + sent together with the POST request headers in the initial send(). + +Daniel Stenberg (25 Mar 2008) +- Made setting the CURLOPT_SSL_CTX_FUNCTION option return a failure in case + libcurl wasn't built to use OpenSSL as that is a prerequisite for this + option to function! + +Daniel Stenberg (22 Mar 2008) +- Fixed the problem with doing a zero byte SCP transfer, verified with test + case 617 (which was added by Daniel Fandrich 5 Mar 2008). + +Daniel Fandrich (20 Mar 2008) +- Fixed a problem where curl-config --protocols could erroneously show LDAPS + support when curl didn't even have regular LDAP support. It looks like + this could happen when the --enable-ldaps configure switch is given but + configure couldn't find the LDAP headers or libraries. + +Michal Marek (20 Mar 2008) +- Added --with-ca-path=DIRECTORY configure option to use an openSSL CApath by + default instead of a ca bundle. The configure script will also look for a + ca path if no ca bundle is found and no option given. + +- Fixed detection of previously installed curl-ca-bundle.crt + +Daniel Fandrich (18 Mar 2008) +- Added test 626 to reproduce an infinite loop when given an invalid + SFTP quote command reported by Vincent Le Normand, and fixed it. + +Michal Marek (18 Mar 2008) +- Added curl_easy_getinfo typechecker. + +- Added macros for curl_share_setopt and curl_multi_setopt to check at least + the correct number of arguments. + +Daniel Fandrich (13 Mar 2008) +- Added tests 622-625 to test SFTP/SCP uploads. Test 625 was an attempt to + reproduce the --ftp-create-dirs problem reported by Brian Ulm, but that + seems to need a call curl_easy_reset() which this test case doesn't do. + +Daniel Stenberg (13 Mar 2008) +- Brian Ulm figured out that if you did an SFTP upload with + CURLOPT_FTP_CREATE_MISSING_DIRS to create a directory, and then re-used the + handle and uploaded another file to another directory that needed to be + created, the second upload would fail. Another case of a state variable that + wasn't properly reset between requests. + +- I rewrote the 100-continue code to use a single state variable instead of + the previous two ones. I think it made the logic somewhat clearer. + +Daniel Stenberg (11 Mar 2008) +- Dmitry Popov filed bug report #1911069 + (http://curl.haxx.se/bug/view.cgi?id=1911069) that identified a race + condition in the name resolver code when the DNS cache is shared between + multiple easy handles, each running in simultaneous threads that could cause + crashes. + +- Added a macro for curl_easy_setopt() that accepts three arguments and simply + does nothing with them, just to make sure libcurl users always use three + arguments to this function. Due to its use of ... for the third argument, it + is otherwise hard to detect abuse. + +Michal Marek (11 Mar 2008) +- Added a type checking macro for curl_easy_setopt(), needs gcc-4.3 and only + works in C mode atm (http://curl.haxx.se/mail/lib-2008-02/0267.html , + http://curl.haxx.se/mail/lib-2008-02/0292.html ) + +Daniel Fandrich (10 Mar 2008) +- Added tests 618-621 to test SFTP/SCP transfers of more than one file + (test 620 tests the just-fixed problem reported by Brian Ulm). + +Daniel Stenberg (9 Mar 2008) +- Brian Ulm reported a crash when doing a second SFTP transfer on a re-used + easy handle if curl_easy_reset() was used between them. I fixed it and Brian + verified that it cured his problem. + +- Brian Ulm reported that if you first tried to download a non-existing SFTP + file and then fetched an existing one and re-used the handle, libcurl would + still report the second one as non-existing as well! I fixed it and Brian + verified that it cured his problem. + +Michal Marek (6 Mar 2008) +- Fix the gssapi configure check to detect newer MIT Kerberos (patch by + Michael Calmer) + +Yang Tse (6 Mar 2008) +- Fix regression on Curl_socket_ready() and Curl_poll() so that these will + again fail on select/poll errors different than EINTR. + +Daniel Fandrich (5 Mar 2008) +- Fixed the test harness so it will write out zero-length data files. + +- Added tests 616 and 617 to see how SFTP and SCP cope with zero-length + files, as questioned by Mike Protts. SFTP does for me but SCP doesn't + so test 617 is disabled for now. + +Daniel S (4 Mar 2008) +- Mike Protts brought a patch that makes resumed transfers work with SFTP. + +Daniel S (1 Mar 2008) +- Anatoli Tubman found and fixed a crash with Negotiate authentication used on + a re-used connection where both requests used Negotiate. + +Guenter Knauf (26 Feb 2008) +- Kaspar Brand provided a patch to support server name indication (RFC 4366). + +Daniel S (25 Feb 2008) +- Kaspar Brand made GnuTLS-built libcurl properly acknowledge the option that + forces it to prefer SSLv3. + +Daniel S (23 Feb 2008) +- Sam Listopad provided a patch in feature-request #1900014 + http://curl.haxx.se/bug/feature.cgi?id=1900014 that makes libcurl (built to + use OpenSSL) support a full chain of certificates in a given PKCS12 + certificate. + +Daniel S (22 Feb 2008) +- Georg Lippitsch made the src/Makefile.vc6 makefile use the same memory model + options as the lib/Makefile.vc6 already did. + +Daniel S (21 Feb 2008) +- Zmey Petroff found a crash when libcurl accessed a NULL pointer, which + happened if you set the connection cache size to 1 and for example failed to + login to an FTP site. Bug report #1896698 + (http://curl.haxx.se/bug/view.cgi?id=1896698) + +Daniel S (20 Feb 2008) +- Fixed test case 405 to not fail when libcurl is built with GnuTLS + +- Based on initial work done by Gautam Kachroo to address a bug, we now keep + better control at the exact state of the connection's SSL status so that we + know exactly when it has completed the SSL negotiation or not so that there + won't be accidental re-uses of connections that are wrongly believed to be + in SSL-completed-negotiate state. + +- We no longer support setting the CURLOPT_URL option from inside a callback + such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location: + following. The patch that introduced this feature was done for 7.11.0, but + this code and functionality has been broken since about 7.15.4 (March 2006) + with the introduction of non-blocking OpenSSL "connects". + + It was a hack to begin with and since it doesn't work and hasn't worked + correctly for a long time and nobody has even noticed, I consider it a very + suitable subject for plain removal. And so it was done. + +Guenter Knauf (19 Feb 2008) +- We do no longer support SSLv2 by default since it has known flaws. + Kaspar Brand provided a patch for all supported SSL toolkits. + +Daniel Fandrich (19 Feb 2008) +- Added test309 to test HTTP redirect to HTTPS URL + +Daniel S (18 Feb 2008) +- We're no longer providing a very old ca-bundle in the curl tarball. You can + get a fresh one downloaded and created with 'make ca-bundle' or you can get + one from here => http://curl.haxx.se/docs/caextract.html if you want a fresh + new one extracted from Mozilla's recent list of ca certs. + + The configure option --with-ca-bundle now lets you specify what file to use + as default ca bundle for your build. If not specified, the configure script + will check a few known standard places for a global ca cert to use. + +Daniel S (17 Feb 2008) +- Jerome Muffat-Meridol helped me fix Curl_done() to close the current + connection by force when it was called before the entire request is + completed, simply because we can't know if the connection really can be + re-used safely at that point. + +- Based on the same debugging logic, I've also made Curl_http_done() not + return CURLE_GOT_NOTHING if called "prematurely". This should have no real + effect to anything but the code makes more sense like this. + +Daniel S (15 Feb 2008) +- Made the gnutls code path not even try to get the server cert if no peer + verification is requested. Previously it would even return failure if gnutls + failed to get the server cert even though no verification was asked for. + Public server showing the problem: https://www.net222.caisse-epargne.fr + +- Fix my Curl_timeleft() leftover mistake in the gnutls code + +- Pooyan McSporran found and fixed a flaw where you first would do a normal + http request and then you'd reuse the handle and replace the Accept: header, + as then libcurl would send two Accept: headers! + +Daniel S (11 Feb 2008) +- Yang Tse pointed out a few remaining quirks from my timeout refactoring from + Feb 7 that didn't abort properly on timeouts. These are actually old + problems but now they should be fixed. + +Yang Tse (10 Feb 2008) +- Bug report #1888932 (http://curl.haxx.se/bug/view.cgi?id=1888932) points out + and provides test program that demonstrates that libcurl might not set error + description message for error CURLE_COULDNT_RESOLVE_HOST for Windows threaded + name resolver builds. Fixed now. + +Daniel Fandrich (8 Feb 2008) +- Added key words to all SSL-using tests so they can be skipped if necessary. + Removed a few unnecessary requires SSL statements. + +Daniel S (8 Feb 2008) +- Mike Hommey filed and fixed bug report #1889856 + (http://curl.haxx.se/bug/view.cgi?id=1889856): When using the gnutls ssl + layer, cleaning-up and reinitializing curl ends up with https requests + failing with "ASN1 parser: Element was not found" errors. Obviously a + regression added in 7.16.3. + +Yang Tse (8 Feb 2008) +- Improved test harness SCP/SFTP start up server verification, doing a real + connection to the sftp server, authenticating and running a simple sftp + pwd command using the test harness generated configuration and key files. + +Daniel S (8 Feb 2008) +- Günter Knauf added lib/mk-ca-bundle.pl which gets the Firefox ca bundle and + creates a suitable ca-bundle.crt file in PEM format for use with curl. The + recommended way to run it is to use 'make ca-bundle' in the build tree root. + +Daniel Fandrich (7 Feb 2008) +- Added tests 1022 and 1023 to validate output of curl-config --version and + --vernum + +Daniel S (7 Feb 2008) +- Refactored a lot of timeout code into a few functions in an attempt to make + them all use the same (hopefully correct) logic to make it less error-prone + and easier to introduce library-wide where it should be used. + +Yang Tse (6 Feb 2008) +- Fix an issue in strdup replacement function when dealing with absolutely + huge strings. Only systems without a standard strdup would be affected. + +Daniel S (3 Feb 2008) +- Dmitry Kurochkin cleaned up the pipelining code and removed the need for and + use of the "is_in_pipeline" struct field. + +- I wrote up and added the threaded-ssl.c example source code that shows how + to do multi-threaded downloads of HTTPS files with a libcurl that is built + with OpenSSL. It uses pthreads for the threading. + +Daniel S (31 Jan 2008) +- Niklas Angebrand made the cookie support in libcurl properly deal with the + "HttpOnly" feature introduced by Microsoft and apparently also supported by + Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly + is now supported when received from servers in HTTP headers, when written to + cookie jars and when read from existing cookie jars. + + I modified test case 31 and 46 to also do some basic HttpOnly testing. + +- Dmitry Kurochkin moved several struct fields from the connectdata struct to + the SingleRequest one to make pipelining better. It is a bit tricky to keep + them in the right place, to keep things related to the actual request or to + the actual connection in the right place. + +Daniel S (29 Jan 2008) +- Dmitry Kurochkin fixed Curl_done() for pipelining, as it could previously + crash! + +- Michal Marek fixed minor mistake in test case 553 that prevented it from + working on other IP-addresses or port numbers. + +Version 7.18.0 (28 January 2008) + +Daniel S (27 Jan 2008) +- Dmitry Kurochkin: In "real world" testing I found more bugs in + pipelining. Broken connection is not restored and we get into infinite + loop. It happens because of wrong is_in_pipeline values. + +Daniel S (26 Jan 2008) +- Kevin Reed filed bug report #1879375 + (http://curl.haxx.se/bug/view.cgi?id=1879375) which describes how libcurl + got lost in this scenario: proxy tunnel (or HTTPS over proxy), ask to do any + proxy authentication and the proxy replies with an auth (like NTLM) and then + closes the connection after that initial informational response. + + libcurl would not properly re-initialize the connection to the proxy and + continue the auth negotiation like supposed. It does now however, as it will + now detect if one or more authentication methods were available and asked + for, and will thus retry the connection and continue from there. + +- I made the progress callback get called properly during proxy CONNECT. + +Daniel S (23 Jan 2008) +- Igor Franchuk pointed out that CURLOPT_COOKIELIST set to "ALL" leaked + memory, and so did "SESS". Fixed now. + +Yang Tse (22 Jan 2008) +- Check poll.h at configuration time, and use it when sys/poll.h unavailable + +Daniel S (22 Jan 2008) +- Dmitry Kurochkin removed the cancelled state for pipelining, as we agreed + that it is bad anyway. Starting now, removing a handle that is in used in a + pipeline will break the pipeline - it'll be set back up again but still... + +Yang Tse (21 Jan 2008) +- Disable ldap support for cygwin builds, since it breaks whole build process. + Fixing it will affect other platforms, so it is postponed for another release. + +Daniel S (18 Jan 2008) +- Lau Hang Kin found and fixed a problem with the multi interface when doing + CONNECT over a proxy. curl_multi_fdset() didn't report back the socket + properly during that state, due to a missing case in the switch in the + multi_getsock() function. + +Yang Tse (17 Jan 2008) +- Don't abort tests 518 and 537 when unable to raise the open-file soft limit. + +Daniel S (16 Jan 2008) +- Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring + out what valgrind to run. + +Yang Tse (16 Jan 2008) +- Improved handling of out of memory in the command line tool that afected + data url encoded HTTP POSTs when reading it from a file. + +Daniel S (16 Jan 2008) +- Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support that + previously had a number of flaws, perhaps most notably when an application + fired up N transfers at once as then they wouldn't pipeline at all that + nicely as anyone would think... Test case 530 was also updated to take the + improved functionality into account. + +- Calls to Curl_failf() are not supposed to provide a trailing newline as the + function itself adds that. Fixed on 50 or something strings! + +Daniel S (15 Jan 2008) +- I made the torture test on test 530 go through. This was actually due to + silly code left from when we switched to let the multi handle "hold" the dns + cache when using the multi interface... Of course this only triggered when a + certain function call returned error at the correct moment. + +Daniel S (14 Jan 2008) +- Joe Malicki filed bug report #1871269 + (http://curl.haxx.se/bug/view.cgi?id=1871269) and we could fix his hang- + problem that occurred when doing a large HTTP POST request with the + response-body read from a callback. + +Daniel S (12 Jan 2008) +- I re-arranged the curl --help output. All the options are now sorted on + their long option names and all descriptions are one-liners. + +- Eric Landes provided the patch (edited by me) that introduces the + --keepalive-time to curl to set the keepalive probe interval. I also took + the opportunity to rename the recently added no-keep-alive option to + no-keepalive to keep a consistent naming and to avoid getting two dashes in + these option names. Eric also provided an update to the man page for the new + option. + +Daniel S (11 Jan 2008) +- Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it + already worked for FTP:// URLs. + +- I made the curl tool switch from using CURLOPT_IOCTLFUNCTION to now use the + spanking new CURLOPT_SEEKFUNCTION simply to take advantage of the improved + performance for the upload resume cases where you want to upload the last + few bytes of a very large file. To implement this decently, I had to switch + the client code for uploading from fopen()/fread() to plain open()/read() so + that we can use lseek() to do >32bit seeks (as fseek() doesn't allow that) + on systems that offer support for that. + +Daniel S (10 Jan 2008) +- Michal Marek made curl-config --libs not include /usr/lib64 in the output + (it already before skipped /usr/lib). /usr/lib64 is the default library + directory on many 64bit systems and it's unlikely that anyone would use the + path privately on systems where it's not. + +- Georg Lippitsch brought CURLOPT_SEEKFUNCTION and CURLOPT_SEEKDATA to allow + libcurl to seek in a given input stream. This is particularly important when + doing upload resumes when there's already a huge part of the file present + remotely. Before, and still if this callback isn't used, libcurl will read + and through away the entire file up to the point to where the resuming + begins (which of course can be a slow opereration depending on file size, + I/O bandwidth and more). This new function will also be preferred to get + used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when + doing multi-stage HTTP auth with POST/PUT. + +- Nikitinskit Dmitriy filed bug report #1868255 + (http://curl.haxx.se/bug/view.cgi?id=1868255) with a patch. It identifies + and fixes a problem with parsing WWW-Authenticate: headers with additional + spaces in the line that the parser wasn't written to deal with. + +Daniel S (8 Jan 2008) +- Introducing curl_easy_pause() and new magic return codes for both the read + and the write callbacks that now can make a connection's reading and/or + writing get paused. + +Daniel S (6 Jan 2008) +- Jeff Johnson filed bug report #1863171 + (http://curl.haxx.se/bug/view.cgi?id=1863171) where he pointed out that + libcurl's date parser didn't accept a +1300 time zone which actually is used + fairly often (like New Zealand's Dailight Savings Time), so I modified the + parser to now accept up to and including -1400 to +1400. + +Daniel S (5 Jan 2008) +- Based on further discussion on curl-library, I reverted yesterday's SOCKS5 + code to instead introduce support for a new proxy type called + CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy + instead of IP address and there's thus no longer any need for a new + curl_easy_setopt() option. + + The default SOCKS5 proxy is again back to sending the IP address to the + proxy. The new curl command line option for enabling sending host name to a + SOCKS5 proxy is now --socks5-hostname. + +Daniel S (4 Jan 2008) +- Based on Maxim Perenesenko's patch, we now do SOCKS5 operations and let the + proxy do the host name resolving and only if --socks5ip (or + CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and + pass on the IP address only to the proxy. + +Yang Tse (3 Jan 2008) +- Modified test harness to allow SCP, SFTP and SOCKS4 tests to run with + OpenSSH 2.9.9, SunSSH 1.0 or later versions. SOCKS5 tests need OpenSSH + 3.7, SunSSH 1.0 or later. + +Daniel S (2 Jan 2008) +- I fixed two cases of missing return code checks when handling chunked + decoding where a write error (or abort return from a callback) didn't stop + libcurl's processing. + +- I removed the socklen_t use from the public curl/curl.h header and instead + made it an unsigned int. The type was only used in the curl_sockaddr struct + definition (only used by the curl_opensocket_callback). On all platforms I + could find information about, socklen_t is 32 unsigned bits large so I don't + think this will break the API or ABI. The main reason for this change is of + course for all the platforms that don't have a socklen_t definition in their + headers to build fine again. Providing our own configure magic and custom + definition of socklen_t on those systems proved to work but was a lot of + cruft, code and extra magic needed - when this very small change of type + seems harmless and still solves the missing socklen_t problem. + +- Richard Atterer brought a patch that added support for SOCKS4a proxies, + which is an inofficial PROXY4 variant that sends the hostname to the proxy + instead of the resolved address (which is already supported by SOCKS5). + --socks4a is the curl command line option for it and CURLOPT_PROXYTYPE can + now be set to CURLPROXY_SOCKS4A as well. + +Daniel S (1 Jan 2008) +- Mohun Biswas pointed out that --libcurl generated a source code with an int + function but without a return statement. While fixing that, I also took care + about adding some better comments for the generated code. + Daniel S (27 Dec 2007) - Dmitry Kurochkin mentioned a flaw (http://curl.haxx.se/mail/lib-2007-12/0252.html) in detect_proxy() which -- cgit v1.2.3