From 8b6314ccfbe48bba2cd560812dd1841425f3bd79 Mon Sep 17 00:00:00 2001 From: Daniel Stenberg Date: Thu, 3 Jan 2002 15:01:22 +0000 Subject: merged the multi-dev branch back into MAIN again --- lib/Makefile.am | 3 +- lib/multi.c | 58 ++- lib/multi.h | 3 +- lib/transfer.c | 1462 +++++++++++++++++++++++++++++-------------------------- lib/transfer.h | 13 +- lib/url.c | 57 ++- lib/url.h | 10 +- lib/urldata.h | 61 ++- 8 files changed, 925 insertions(+), 742 deletions(-) (limited to 'lib') diff --git a/lib/Makefile.am b/lib/Makefile.am index 63bf02cec..4af61410a 100644 --- a/lib/Makefile.am +++ b/lib/Makefile.am @@ -57,7 +57,8 @@ escape.h getpass.c netrc.c telnet.h \ getinfo.c getinfo.h transfer.c strequal.c strequal.h easy.c \ security.h security.c krb4.c krb4.h memdebug.c memdebug.h inet_ntoa_r.h \ http_chunks.c http_chunks.h strtok.c strtok.h connect.c connect.h \ -llist.c llist.h hash.c hash.h +llist.c llist.h hash.c hash.h multi.c multi.h + noinst_HEADERS = setup.h transfer.h diff --git a/lib/multi.c b/lib/multi.c index ff9e91fea..b7ab209f5 100644 --- a/lib/multi.c +++ b/lib/multi.c @@ -22,10 +22,16 @@ *****************************************************************************/ #include "setup.h" +#include +#include #include #include "multi.h" /* will become soon */ +#include "urldata.h" +#include "transfer.h" +#include "url.h" + struct Curl_message { /* the 'CURLMsg' is the part that is visible to the external user */ struct CURLMsg extmsg; @@ -48,7 +54,9 @@ struct Curl_one_easy { struct Curl_one_easy *next; struct Curl_one_easy *prev; - CURL *easy_handle; /* this is the easy handle for this unit */ + struct SessionHandle *easy_handle; /* the easy handle for this unit */ + struct connectdata *easy_conn; /* the "unit's" connection */ + CURLMstate state; /* the handle's state */ CURLcode result; /* previous result */ }; @@ -134,7 +142,7 @@ CURLMcode curl_multi_add_handle(CURLM *multi_handle, /* increase the node-counter */ multi->num_easy++; - return CURLM_OK; + return CURLM_CALL_MULTI_PERFORM; } CURLMcode curl_multi_remove_handle(CURLM *multi_handle, @@ -190,23 +198,30 @@ CURLMcode curl_multi_fdset(CURLM *multi_handle, and then we must make sure that is done. */ struct Curl_multi *multi=(struct Curl_multi *)multi_handle; struct Curl_one_easy *easy; + int this_max_fd=-1; if(!GOOD_MULTI_HANDLE(multi)) return CURLM_BAD_HANDLE; + *max_fd = -1; /* so far none! */ + easy=multi->easy.next; while(easy) { switch(easy->state) { - case CURLM_STATE_INIT: - case CURLM_STATE_CONNECT: - case CURLM_STATE_DO: - case CURLM_STATE_DONE: - /* we want curl_multi_perform() to get called, but we don't have any - file descriptors to set */ + default: break; case CURLM_STATE_PERFORM: /* This should have a set of file descriptors for us to set. */ /* after the transfer is done, go DONE */ + + Curl_single_fdset(easy->easy_conn, + read_fd_set, write_fd_set, + exc_fd_set, &this_max_fd); + + /* remember the maximum file descriptor */ + if(this_max_fd > *max_fd) + *max_fd = this_max_fd; + break; } easy = easy->next; /* check next handle */ @@ -222,6 +237,8 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) bool done; CURLMcode result=CURLM_OK; + *running_handles = 0; /* bump this once for every living handle */ + if(!GOOD_MULTI_HANDLE(multi)) return CURLM_BAD_HANDLE; @@ -239,8 +256,9 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) } break; case CURLM_STATE_CONNECT: - /* connect */ - easy->result = Curl_connect(easy->easy_handle); + /* Connect. We get a connection identifier filled in. */ + easy->result = Curl_connect(easy->easy_handle, &easy->easy_conn); + /* after connect, go DO */ if(CURLE_OK == easy->result) { easy->state = CURLM_STATE_DO; @@ -249,15 +267,18 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) break; case CURLM_STATE_DO: /* Do the fetch or put request */ - easy->result = Curl_do(easy->easy_handle); + easy->result = Curl_do(&easy->easy_conn); /* after do, go PERFORM */ if(CURLE_OK == easy->result) { - easy->state = CURLM_STATE_PERFORM; + if(CURLE_OK == Curl_readwrite_init(easy->easy_conn)) { + easy->state = CURLM_STATE_PERFORM; + result = CURLM_CALL_MULTI_PERFORM; + } } break; case CURLM_STATE_PERFORM: /* read/write data if it is ready to do so */ - easy->result = Curl_readwrite(easy->easy_handle, &done); + easy->result = Curl_readwrite(easy->easy_conn, &done); /* hm, when we follow redirects, we may need to go back to the CONNECT state */ /* after the transfer is done, go DONE */ @@ -265,11 +286,12 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) /* call this even if the readwrite function returned error */ easy->result = Curl_posttransfer(easy->easy_handle); easy->state = CURLM_STATE_DONE; + result = CURLM_CALL_MULTI_PERFORM; } break; case CURLM_STATE_DONE: /* post-transfer command */ - easy->result = Curl_done(easy->easy_handle); + easy->result = Curl_done(easy->easy_conn); /* after we have DONE what we're supposed to do, go COMPLETED */ if(CURLE_OK == easy->result) easy->state = CURLM_STATE_COMPLETED; @@ -280,7 +302,10 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) /* This node should be delinked from the list now and we should post an information message that we are complete. */ break; + default: + return CURLM_INTERNAL_ERROR; } + if((CURLM_STATE_COMPLETED != easy->state) && (CURLE_OK != easy->result)) { /* @@ -289,10 +314,13 @@ CURLMcode curl_multi_perform(CURLM *multi_handle, int *running_handles) */ easy->state = CURLM_STATE_COMPLETED; } + else if(CURLM_STATE_COMPLETED != easy->state) + /* this one still lives! */ + (*running_handles)++; easy = easy->next; /* operate on next handle */ } - return CURLM_OK; + return result; } CURLMcode curl_multi_cleanup(CURLM *multi_handle) diff --git a/lib/multi.h b/lib/multi.h index 1fdce73f0..40010d500 100644 --- a/lib/multi.h +++ b/lib/multi.h @@ -50,7 +50,7 @@ #ifdef HAVE_SYS_SOCKET_H #include #endif -#include +#include typedef void CURLM; @@ -60,6 +60,7 @@ typedef enum { CURLM_BAD_HANDLE, /* the passed-in handle is not a valid CURLM handle */ CURLM_BAD_EASY_HANDLE, /* an easy handle was not good/valid */ CURLM_OUT_OF_MEMORY, /* if you ever get this, you're in deep sh*t */ + CURLM_INTERNAL_ERROR, /* this is a libcurl bug */ CURLM_LAST } CURLMcode; diff --git a/lib/transfer.c b/lib/transfer.c index 7c73c11b0..159151f59 100644 --- a/lib/transfer.c +++ b/lib/transfer.c @@ -106,6 +106,13 @@ #define min(a, b) ((a) < (b) ? (a) : (b)) #endif +enum { + KEEP_NONE, + KEEP_READ, + KEEP_WRITE +}; + + /* * compareheader() * @@ -161,752 +168,796 @@ compareheader(char *headerline, /* line to check */ return FALSE; /* no match */ } -/* - * Transfer() - * - * This function is what performs the actual transfer. It is capable of - * doing both ways simultaneously. - * The transfer must already have been setup by a call to Curl_Transfer(). - * - * Note that headers are created in a preallocated buffer of a default size. - * That buffer can be enlarged on demand, but it is never shrinken again. - * - * Parts of this function was once written by the friendly Mark Butler - * . - */ - -static CURLcode -Transfer(struct connectdata *c_conn) +CURLcode Curl_readwrite(struct connectdata *conn, + bool *done) { - ssize_t nread; /* number of bytes read */ - int bytecount = 0; /* total number of bytes read */ - int writebytecount = 0; /* number of bytes written */ - long contentlength=0; /* size of incoming data */ - struct timeval start = Curl_tvnow(); - struct timeval now = start; /* current time */ - bool header = TRUE; /* incoming data has HTTP header */ - int headerline = 0; /* counts header lines to better track the - first one */ - char *hbufp; /* points at *end* of header line */ - int hbuflen = 0; - char *str; /* within buf */ - char *str_start; /* within buf */ - char *end_ptr; /* within buf */ - char *p; /* within headerbuff */ - bool content_range = FALSE; /* set TRUE if Content-Range: was found */ - int offset = 0; /* possible resume offset read from the - Content-Range: header */ - int httpcode = 0; /* error code from the 'HTTP/1.? XXX' line */ - int httpversion = -1; /* the HTTP version*10 */ - bool write_after_100_header = FALSE; /* should we enable the write after - we received a 100-continue/timeout - or directly */ - - /* for the low speed checks: */ - CURLcode urg; - time_t timeofdoc=0; - long bodywrites=0; - int writetype; - - /* the highest fd we use + 1 */ - struct SessionHandle *data; - struct connectdata *conn = (struct connectdata *)c_conn; - char *buf; - int maxfd; + struct Curl_transfer_keeper *k = &conn->keep; + struct SessionHandle *data = conn->data; + CURLcode result; + ssize_t nread; /* number of bytes read */ + int didwhat=0; - data = conn->data; /* there's the root struct */ - buf = data->state.buffer; - maxfd = (conn->sockfd>conn->writesockfd?conn->sockfd:conn->writesockfd)+1; - - hbufp = data->state.headerbuff; + do { + if((k->keepon & KEEP_READ) && + FD_ISSET(conn->sockfd, &k->readfd)) { - now = Curl_tvnow(); - start = now; + if ((k->bytecount == 0) && (k->writebytecount == 0)) + Curl_pgrsTime(data, TIMER_STARTTRANSFER); -#define KEEP_READ 1 -#define KEEP_WRITE 2 + didwhat |= KEEP_READ; - Curl_pgrsTime(data, TIMER_PRETRANSFER); - Curl_speedinit(data); - - if((conn->sockfd == -1) && - (conn->writesockfd == -1)) { - /* nothing to read, nothing to write, we're already OK! */ - return CURLE_OK; - } + /* read! */ + result = Curl_read(conn, conn->sockfd, k->buf, + BUFSIZE -1, &nread); - if (!conn->getheader) { - header = FALSE; - if(conn->size > 0) - Curl_pgrsSetDownloadSize(data, conn->size); - } - /* we want header and/or body, if neither then don't do this! */ - if(conn->getheader || - !data->set.no_body) { - fd_set readfd; - fd_set writefd; - fd_set rkeepfd; - fd_set wkeepfd; - struct timeval interval; - int keepon=0; - - /* timeout every X second - - makes a better progress meter (i.e even when no data is read, the - meter can be updated and reflect reality) - - allows removal of the alarm() crap - - variable timeout is easier - */ + if(result) + return result; - FD_ZERO (&readfd); /* clear it */ - if(conn->sockfd != -1) { - FD_SET (conn->sockfd, &readfd); /* read socket */ - keepon |= KEEP_READ; - } + /* NULL terminate, allowing string ops to be used */ + if (0 < (signed int) nread) + k->buf[nread] = 0; - FD_ZERO (&writefd); /* clear it */ - if(conn->writesockfd != -1) { - if (data->set.expect100header) - /* wait with write until we either got 100-continue or a timeout */ - write_after_100_header = TRUE; - else { - FD_SET (conn->writesockfd, &writefd); /* write socket */ - keepon |= KEEP_WRITE; + /* if we receive 0 or less here, the server closed the connection and + we bail out from this! */ + else if (0 >= (signed int) nread) { + k->keepon &= ~KEEP_READ; + FD_ZERO(&k->rkeepfd); + break; } - } - /* get these in backup variables to be able to restore them on each lap in - the select() loop */ - rkeepfd = readfd; - wkeepfd = writefd; + /* Default buffer to use when we write the buffer, it may be changed + in the flow below before the actual storing is done. */ + k->str = k->buf; - while (keepon) { - readfd = rkeepfd; /* set those every lap in the loop */ - writefd = wkeepfd; - interval.tv_sec = 1; - interval.tv_usec = 0; + /* Since this is a two-state thing, we check if we are parsing + headers at the moment or not. */ + if (k->header) { + /* we are in parse-the-header-mode */ - switch (select (maxfd, &readfd, &writefd, NULL, &interval)) { - case -1: /* select() error, stop reading */ -#ifdef EINTR - /* The EINTR is not serious, and it seems you might get this more - ofen when using the lib in a multi-threaded environment! */ - if(errno == EINTR) - ; - else -#endif - keepon = 0; /* no more read or write */ - continue; - case 0: /* timeout */ - if (write_after_100_header) { - write_after_100_header = FALSE; - FD_SET (conn->writesockfd, &writefd); /* write socket */ - keepon |= KEEP_WRITE; - wkeepfd = writefd; - } - break; - default: - if ((bytecount == 0) && (writebytecount == 0)) - Curl_pgrsTime(data, TIMER_STARTTRANSFER); - if((keepon & KEEP_READ) && FD_ISSET(conn->sockfd, &readfd)) { - /* read! */ - urg = Curl_read(conn, conn->sockfd, buf, BUFSIZE -1, &nread); - - /* NULL terminate, allowing string ops to be used */ - if (0 < (signed int) nread) - buf[nread] = 0; - - /* if we receive 0 or less here, the server closed the connection and - we bail out from this! */ - else if (0 >= (signed int) nread) { - keepon &= ~KEEP_READ; - FD_ZERO(&rkeepfd); - break; + /* header line within buffer loop */ + do { + int hbufp_index; + + /* str_start is start of line within buf */ + k->str_start = k->str; + + k->end_ptr = strchr (k->str_start, '\n'); + + if (!k->end_ptr) { + /* no more complete header lines within buffer */ + /* copy what is remaining into headerbuff */ + int str_length = (int)strlen(k->str); + + /* + * We enlarge the header buffer if it seems to be too + * smallish + */ + if (k->hbuflen + (int)str_length >= + data->state.headersize) { + char *newbuff; + long newsize=MAX((k->hbuflen+str_length)*3/2, + data->state.headersize*2); + hbufp_index = k->hbufp - data->state.headerbuff; + newbuff = (char *)realloc(data->state.headerbuff, newsize); + if(!newbuff) { + failf (data, "Failed to alloc memory for big header!"); + return CURLE_READ_ERROR; + } + data->state.headersize=newsize; + data->state.headerbuff = newbuff; + k->hbufp = data->state.headerbuff + hbufp_index; + } + strcpy (k->hbufp, k->str); + k->hbufp += strlen (k->str); + k->hbuflen += strlen (k->str); + break; /* read more and try again */ } - str = buf; /* Default buffer to use when we write the - buffer, it may be changed in the flow below - before the actual storing is done. */ + k->str = k->end_ptr + 1; /* move past new line */ - /* Since this is a two-state thing, we check if we are parsing - headers at the moment or not. */ - - if (header) { - /* we are in parse-the-header-mode */ + /* + * We're about to copy a chunk of data to the end of the + * already received header. We make sure that the full string + * fit in the allocated header buffer, or else we enlarge + * it. + */ + if (k->hbuflen + (k->str - k->str_start) >= + data->state.headersize) { + char *newbuff; + long newsize=MAX((k->hbuflen+ + (k->str-k->str_start))*3/2, + data->state.headersize*2); + hbufp_index = k->hbufp - data->state.headerbuff; + newbuff = (char *)realloc(data->state.headerbuff, newsize); + if(!newbuff) { + failf (data, "Failed to alloc memory for big header!"); + return CURLE_READ_ERROR; + } + data->state.headersize= newsize; + data->state.headerbuff = newbuff; + k->hbufp = data->state.headerbuff + hbufp_index; + } - /* header line within buffer loop */ - do { - int hbufp_index; + /* copy to end of line */ + strncpy (k->hbufp, k->str_start, k->str - k->str_start); + k->hbufp += k->str - k->str_start; + k->hbuflen += k->str - k->str_start; + *k->hbufp = 0; - str_start = str; /* str_start is start of line within buf */ + k->p = data->state.headerbuff; - end_ptr = strchr (str_start, '\n'); - - if (!end_ptr) { - /* no more complete header lines within buffer */ - /* copy what is remaining into headerbuff */ - int str_length = (int)strlen(str); - - /* - * We enlarge the header buffer if it seems to be too - * smallish - */ - if (hbuflen + (int)str_length >= data->state.headersize) { - char *newbuff; - long newsize=MAX((hbuflen+str_length)*3/2, - data->state.headersize*2); - hbufp_index = hbufp - data->state.headerbuff; - newbuff = (char *)realloc(data->state.headerbuff, newsize); - if(!newbuff) { - failf (data, "Failed to alloc memory for big header!"); - return CURLE_READ_ERROR; - } - data->state.headersize=newsize; - data->state.headerbuff = newbuff; - hbufp = data->state.headerbuff + hbufp_index; - } - strcpy (hbufp, str); - hbufp += strlen (str); - hbuflen += strlen (str); - break; /* read more and try again */ - } + /**** + * We now have a FULL header line that p points to + *****/ - str = end_ptr + 1; /* move just past new line */ + if (('\n' == *k->p) || ('\r' == *k->p)) { + /* Zero-length header line means end of headers! */ + if ('\r' == *k->p) + k->p++; /* pass the \r byte */ + if ('\n' == *k->p) + k->p++; /* pass the \n byte */ + + if(100 == k->httpcode) { /* - * We're about to copy a chunk of data to the end of the - * already received header. We make sure that the full string - * fit in the allocated header buffer, or else we enlarge - * it. + * we have made a HTTP PUT or POST and this is 1.1-lingo + * that tells us that the server is OK with this and ready + * to receive our stuff. + * However, we'll get more headers now so we must get + * back into the header-parsing state! */ - if (hbuflen + (str - str_start) >= data->state.headersize) { - char *newbuff; - long newsize=MAX((hbuflen+(str-str_start))*3/2, - data->state.headersize*2); - hbufp_index = hbufp - data->state.headerbuff; - newbuff = (char *)realloc(data->state.headerbuff, newsize); - if(!newbuff) { - failf (data, "Failed to alloc memory for big header!"); - return CURLE_READ_ERROR; - } - data->state.headersize= newsize; - data->state.headerbuff = newbuff; - hbufp = data->state.headerbuff + hbufp_index; + k->header = TRUE; + k->headerline = 0; /* restart the header line counter */ + /* if we did wait for this do enable write now! */ + if (k->write_after_100_header) { + k->write_after_100_header = FALSE; + FD_SET (conn->writesockfd, &k->writefd); /* write */ + k->keepon |= KEEP_WRITE; + k->wkeepfd = k->writefd; } + } + else + k->header = FALSE; /* no more header to parse! */ - /* copy to end of line */ - strncpy (hbufp, str_start, str - str_start); - hbufp += str - str_start; - hbuflen += str - str_start; - *hbufp = 0; - - p = data->state.headerbuff; - - /**** - * We now have a FULL header line that p points to - *****/ - - if (('\n' == *p) || ('\r' == *p)) { - /* Zero-length header line means end of headers! */ - - if ('\r' == *p) - p++; /* pass the \r byte */ - if ('\n' == *p) - p++; /* pass the \n byte */ - - if(100 == httpcode) { - /* - * we have made a HTTP PUT or POST and this is 1.1-lingo - * that tells us that the server is OK with this and ready - * to receive our stuff. - * However, we'll get more headers now so we must get - * back into the header-parsing state! - */ - header = TRUE; - headerline = 0; /* we restart the header line counter */ - /* if we did wait for this do enable write now! */ - if (write_after_100_header) { - write_after_100_header = FALSE; - FD_SET (conn->writesockfd, &writefd); /* write socket */ - keepon |= KEEP_WRITE; - wkeepfd = writefd; - } - } - else - header = FALSE; /* no more header to parse! */ - - if (417 == httpcode) { - /* - * we got: "417 Expectation Failed" this means: - * we have made a HTTP call and our Expect Header - * seems to cause a problem => abort the write operations - * (or prevent them from starting - */ - write_after_100_header = FALSE; - keepon &= ~KEEP_WRITE; - FD_ZERO(&wkeepfd); - } - - /* now, only output this if the header AND body are requested: - */ - writetype = CLIENTWRITE_HEADER; - if (data->set.http_include_header) - writetype |= CLIENTWRITE_BODY; - - urg = Curl_client_write(data, writetype, - data->state.headerbuff, - p - data->state.headerbuff); - if(urg) - return urg; - - data->info.header_size += p - data->state.headerbuff; - conn->headerbytecount += p - data->state.headerbuff; - - if(!header) { - /* - * really end-of-headers. - * - * If we requested a "no body", this is a good time to get - * out and return home. - */ - if(data->set.no_body) - return CURLE_OK; + if (417 == k->httpcode) { + /* + * we got: "417 Expectation Failed" this means: + * we have made a HTTP call and our Expect Header + * seems to cause a problem => abort the write operations + * (or prevent them from starting + */ + k->write_after_100_header = FALSE; + k->keepon &= ~KEEP_WRITE; + FD_ZERO(&k->wkeepfd); + } - if(!conn->bits.close) { - /* If this is not the last request before a close, we must - set the maximum download size to the size of the - expected document or else, we won't know when to stop - reading! */ - if(-1 != conn->size) - conn->maxdownload = conn->size; - - /* If max download size is *zero* (nothing) we already - have nothing and can safely return ok now! */ - if(0 == conn->maxdownload) - return CURLE_OK; - - /* What to do if the size is *not* known? */ - } - break; /* exit header line loop */ - } - - /* We continue reading headers, so reset the line-based - header parsing variables hbufp && hbuflen */ - hbufp = data->state.headerbuff; - hbuflen = 0; - continue; - } + /* now, only output this if the header AND body are requested: + */ + k->writetype = CLIENTWRITE_HEADER; + if (data->set.http_include_header) + k->writetype |= CLIENTWRITE_BODY; + + result = Curl_client_write(data, k->writetype, + data->state.headerbuff, + k->p - data->state.headerbuff); + if(result) + return result; + + data->info.header_size += k->p - data->state.headerbuff; + conn->headerbytecount += k->p - data->state.headerbuff; + if(!k->header) { /* - * Checks for special headers coming up. + * really end-of-headers. + * + * If we requested a "no body", this is a good time to get + * out and return home. */ + if(data->set.no_body) + return CURLE_OK; + + if(!conn->bits.close) { + /* If this is not the last request before a close, we must + set the maximum download size to the size of the + expected document or else, we won't know when to stop + reading! */ + if(-1 != conn->size) + conn->maxdownload = conn->size; + + /* If max download size is *zero* (nothing) we already + have nothing and can safely return ok now! */ + if(0 == conn->maxdownload) + return CURLE_OK; + + /* What to do if the size is *not* known? */ + } + break; /* exit header line loop */ + } + + /* We continue reading headers, so reset the line-based + header parsing variables hbufp && hbuflen */ + k->hbufp = data->state.headerbuff; + k->hbuflen = 0; + continue; + } + + /* + * Checks for special headers coming up. + */ - if (!headerline++) { - /* This is the first header, it MUST be the error code line - or else we consiser this to be the body right away! */ - int httpversion_major; - int nc=sscanf (p, " HTTP/%d.%d %3d", - &httpversion_major ,&httpversion, &httpcode); - if (nc==3) { - httpversion+=10*httpversion_major; - } - else { - /* this is the real world, not a Nirvana - NCSA 1.5.x returns this crap when asked for HTTP/1.1 - */ - nc=sscanf (p, " HTTP %3d", &httpcode); - httpversion = 10; - } - - if (nc) { - data->info.httpcode = httpcode; - data->info.httpversion = httpversion; - - /* 404 -> URL not found! */ - if (data->set.http_fail_on_error && - (httpcode >= 400)) { - /* If we have been told to fail hard on HTTP-errors, - here is the check for that: */ - /* serious error, go home! */ - failf (data, "The requested file was not found"); - return CURLE_HTTP_NOT_FOUND; - } + if (!k->headerline++) { + /* This is the first header, it MUST be the error code line + or else we consiser this to be the body right away! */ + int httpversion_major; + int nc=sscanf (k->p, " HTTP/%d.%d %3d", + &httpversion_major, + &k->httpversion, + &k->httpcode); + if (nc==3) { + k->httpversion += 10 * httpversion_major; + } + else { + /* this is the real world, not a Nirvana + NCSA 1.5.x returns this crap when asked for HTTP/1.1 + */ + nc=sscanf (k->p, " HTTP %3d", &k->httpcode); + k->httpversion = 10; + } - if(httpversion == 10) - /* Default action for HTTP/1.0 must be to close, unless - we get one of those fancy headers that tell us the - server keeps it open for us! */ - conn->bits.close = TRUE; - - if (httpcode == 304) - /* (quote from RFC2616, section 10.3.5): - * The 304 response MUST NOT contain a - * message-body, and thus is always - * terminated by the first empty line - * after the header fields. - */ - conn->size=0; - } - else { - header = FALSE; /* this is not a header line */ - break; - } - } - /* check for Content-Length: header lines to get size */ - if (strnequal("Content-Length:", p, 15) && - sscanf (p+15, " %ld", &contentlength)) { - conn->size = contentlength; - Curl_pgrsSetDownloadSize(data, contentlength); + if (nc) { + data->info.httpcode = k->httpcode; + data->info.httpversion = k->httpversion; + + /* 404 -> URL not found! */ + if (data->set.http_fail_on_error && + (k->httpcode >= 400)) { + /* If we have been told to fail hard on HTTP-errors, + here is the check for that: */ + /* serious error, go home! */ + failf (data, "The requested file was not found"); + return CURLE_HTTP_NOT_FOUND; } - else if((httpversion == 10) && - conn->bits.httpproxy && - compareheader(p, "Proxy-Connection:", "keep-alive")) { - /* - * When a HTTP/1.0 reply comes when using a proxy, the - * 'Proxy-Connection: keep-alive' line tells us the - * connection will be kept alive for our pleasure. - * Default action for 1.0 is to close. - */ - conn->bits.close = FALSE; /* don't close when done */ - infof(data, "HTTP/1.0 proxy connection set to keep alive!\n"); - } - else if((httpversion == 10) && - compareheader(p, "Connection:", "keep-alive")) { - /* - * A HTTP/1.0 reply with the 'Connection: keep-alive' line - * tells us the connection will be kept alive for our - * pleasure. Default action for 1.0 is to close. - * - * [RFC2068, section 19.7.1] */ - conn->bits.close = FALSE; /* don't close when done */ - infof(data, "HTTP/1.0 connection set to keep alive!\n"); - } - else if (compareheader(p, "Connection:", "close")) { - /* - * [RFC 2616, section 8.1.2.1] - * "Connection: close" is HTTP/1.1 language and means that - * the connection will close when this request has been - * served. + + if(k->httpversion == 10) + /* Default action for HTTP/1.0 must be to close, unless + we get one of those fancy headers that tell us the + server keeps it open for us! */ + conn->bits.close = TRUE; + + if (k->httpcode == 304) + /* (quote from RFC2616, section 10.3.5): + * The 304 response MUST NOT contain a + * message-body, and thus is always + * terminated by the first empty line + * after the header fields. */ - conn->bits.close = TRUE; /* close when done */ - } - else if (compareheader(p, "Transfer-Encoding:", "chunked")) { - /* - * [RFC 2616, section 3.6.1] A 'chunked' transfer encoding - * means that the server will send a series of "chunks". Each - * chunk starts with line with info (including size of the - * coming block) (terminated with CRLF), then a block of data - * with the previously mentioned size. There can be any amount - * of chunks, and a chunk-data set to zero signals the - * end-of-chunks. */ - conn->bits.chunk = TRUE; /* chunks coming our way */ - - /* init our chunky engine */ - Curl_httpchunk_init(conn); - } - else if (strnequal("Content-Range:", p, 14)) { - if (sscanf (p+14, " bytes %d-", &offset) || - sscanf (p+14, " bytes: %d-", &offset)) { - /* This second format was added August 1st 2000 by Igor - Khristophorov since Sun's webserver JavaWebServer/1.1.1 - obviously sends the header this way! :-( */ - if (conn->resume_from == offset) { - /* we asked for a resume and we got it */ - content_range = TRUE; - } - } - } - else if(data->cookies && - strnequal("Set-Cookie:", p, 11)) { - Curl_cookie_add(data->cookies, TRUE, &p[12], conn->name); - } - else if(strnequal("Last-Modified:", p, - strlen("Last-Modified:")) && - (data->set.timecondition || data->set.get_filetime) ) { - time_t secs=time(NULL); - timeofdoc = curl_getdate(p+strlen("Last-Modified:"), &secs); - if(data->set.get_filetime>=0) - data->info.filetime = timeofdoc; - } - else if ((httpcode >= 300 && httpcode < 400) && - (data->set.http_follow_location) && - strnequal("Location:", p, 9)) { - /* this is the URL that the server advices us to get instead */ - char *ptr; - char *start=p; - char backup; - - start += 9; /* pass "Location:" */ - - /* Skip spaces and tabs. We do this to support multiple - white spaces after the "Location:" keyword. */ - while(*start && isspace((int)*start )) - start++; - ptr = start; /* start scanning here */ - - /* scan through the string to find the end */ - while(*ptr && !isspace((int)*ptr)) - ptr++; - backup = *ptr; /* store the ending letter */ - *ptr = '\0'; /* zero terminate */ - conn->newurl = strdup(start); /* clone string */ - *ptr = backup; /* restore ending letter */ + conn->size=0; + } + else { + k->header = FALSE; /* this is not a header line */ + break; + } + } + /* check for Content-Length: header lines to get size */ + if (strnequal("Content-Length:", k->p, 15) && + sscanf (k->p+15, " %ld", &k->contentlength)) { + conn->size = k->contentlength; + Curl_pgrsSetDownloadSize(data, k->contentlength); + } + else if((k->httpversion == 10) && + conn->bits.httpproxy && + compareheader(k->p, "Proxy-Connection:", "keep-alive")) { + /* + * When a HTTP/1.0 reply comes when using a proxy, the + * 'Proxy-Connection: keep-alive' line tells us the + * connection will be kept alive for our pleasure. + * Default action for 1.0 is to close. + */ + conn->bits.close = FALSE; /* don't close when done */ + infof(data, "HTTP/1.0 proxy connection set to keep alive!\n"); + } + else if((k->httpversion == 10) && + compareheader(k->p, "Connection:", "keep-alive")) { + /* + * A HTTP/1.0 reply with the 'Connection: keep-alive' line + * tells us the connection will be kept alive for our + * pleasure. Default action for 1.0 is to close. + * + * [RFC2068, section 19.7.1] */ + conn->bits.close = FALSE; /* don't close when done */ + infof(data, "HTTP/1.0 connection set to keep alive!\n"); + } + else if (compareheader(k->p, "Connection:", "close")) { + /* + * [RFC 2616, section 8.1.2.1] + * "Connection: close" is HTTP/1.1 language and means that + * the connection will close when this request has been + * served. + */ + conn->bits.close = TRUE; /* close when done */ + } + else if (compareheader(k->p, "Transfer-Encoding:", "chunked")) { + /* + * [RFC 2616, section 3.6.1] A 'chunked' transfer encoding + * means that the server will send a series of "chunks". Each + * chunk starts with line with info (including size of the + * coming block) (terminated with CRLF), then a block of data + * with the previously mentioned size. There can be any amount + * of chunks, and a chunk-data set to zero signals the + * end-of-chunks. */ + conn->bits.chunk = TRUE; /* chunks coming our way */ + + /* init our chunky engine */ + Curl_httpchunk_init(conn); + } + else if (strnequal("Content-Range:", k->p, 14)) { + if (sscanf (k->p+14, " bytes %d-", &k->offset) || + sscanf (k->p+14, " bytes: %d-", &k->offset)) { + /* This second format was added August 1st 2000 by Igor + Khristophorov since Sun's webserver JavaWebServer/1.1.1 + obviously sends the header this way! :-( */ + if (conn->resume_from == k->offset) { + /* we asked for a resume and we got it */ + k->content_range = TRUE; } + } + } + else if(data->cookies && + strnequal("Set-Cookie:", k->p, 11)) { + Curl_cookie_add(data->cookies, TRUE, k->p+12, conn->name); + } + else if(strnequal("Last-Modified:", k->p, + strlen("Last-Modified:")) && + (data->set.timecondition || data->set.get_filetime) ) { + time_t secs=time(NULL); + k->timeofdoc = curl_getdate(k->p+strlen("Last-Modified:"), + &secs); + if(data->set.get_filetime>=0) + data->info.filetime = k->timeofdoc; + } + else if ((k->httpcode >= 300 && k->httpcode < 400) && + (data->set.http_follow_location) && + strnequal("Location:", k->p, 9)) { + /* this is the URL that the server advices us to get instead */ + char *ptr; + char *start=k->p; + char backup; + + start += 9; /* pass "Location:" */ + + /* Skip spaces and tabs. We do this to support multiple + white spaces after the "Location:" keyword. */ + while(*start && isspace((int)*start )) + start++; + ptr = start; /* start scanning here */ + + /* scan through the string to find the end */ + while(*ptr && !isspace((int)*ptr)) + ptr++; + backup = *ptr; /* store the ending letter */ + *ptr = '\0'; /* zero terminate */ + conn->newurl = strdup(start); /* clone string */ + *ptr = backup; /* restore ending letter */ + } - /* - * End of header-checks. Write them to the client. - */ + /* + * End of header-checks. Write them to the client. + */ - writetype = CLIENTWRITE_HEADER; - if (data->set.http_include_header) - writetype |= CLIENTWRITE_BODY; + k->writetype = CLIENTWRITE_HEADER; + if (data->set.http_include_header) + k->writetype |= CLIENTWRITE_BODY; - urg = Curl_client_write(data, writetype, p, hbuflen); - if(urg) - return urg; + result = Curl_client_write(data, k->writetype, k->p, + k->hbuflen); + if(result) + return result; - data->info.header_size += hbuflen; + data->info.header_size += k->hbuflen; - /* reset hbufp pointer && hbuflen */ - hbufp = data->state.headerbuff; - hbuflen = 0; - } - while (*str); /* header line within buffer */ + /* reset hbufp pointer && hbuflen */ + k->hbufp = data->state.headerbuff; + k->hbuflen = 0; + } + while (*k->str); /* header line within buffer */ - /* We might have reached the end of the header part here, but - there might be a non-header part left in the end of the read - buffer. */ + /* We might have reached the end of the header part here, but + there might be a non-header part left in the end of the read + buffer. */ - if (!header) { - /* the next token and forward is not part of - the header! */ + if (!k->header) { + /* the next token and forward is not part of + the header! */ - /* we subtract the remaining header size from the buffer */ - nread -= (str - buf); - } + /* we subtract the remaining header size from the buffer */ + nread -= (k->str - k->buf); + } - } /* end if header mode */ + } /* end if header mode */ - /* This is not an 'else if' since it may be a rest from the header - parsing, where the beginning of the buffer is headers and the end - is non-headers. */ - if (str && !header && ((signed int)nread > 0)) { + /* This is not an 'else if' since it may be a rest from the header + parsing, where the beginning of the buffer is headers and the end + is non-headers. */ + if (k->str && !k->header && ((signed int)nread > 0)) { - if(0 == bodywrites) { - /* These checks are only made the first time we are about to - write a piece of the body */ - if(conn->protocol&PROT_HTTP) { - /* HTTP-only checks */ - if (conn->newurl) { - /* abort after the headers if "follow Location" is set */ - infof (data, "Follow to new URL: %s\n", conn->newurl); - return CURLE_OK; - } - else if (conn->resume_from && - !content_range && - (data->set.httpreq==HTTPREQ_GET)) { - /* we wanted to resume a download, although the server - doesn't seem to support this and we did this with a GET - (if it wasn't a GET we did a POST or PUT resume) */ - failf (data, "HTTP server doesn't seem to support " - "byte ranges. Cannot resume."); - return CURLE_HTTP_RANGE_ERROR; - } - else if(data->set.timecondition && !conn->range) { - /* A time condition has been set AND no ranges have been - requested. This seems to be what chapter 13.3.4 of - RFC 2616 defines to be the correct action for a - HTTP/1.1 client */ - if((timeofdoc > 0) && (data->set.timevalue > 0)) { - switch(data->set.timecondition) { - case TIMECOND_IFMODSINCE: - default: - if(timeofdoc < data->set.timevalue) { - infof(data, - "The requested document is not new enough\n"); - return CURLE_OK; - } - break; - case TIMECOND_IFUNMODSINCE: - if(timeofdoc > data->set.timevalue) { - infof(data, - "The requested document is not old enough\n"); - return CURLE_OK; - } - break; - } /* switch */ - } /* two valid time strings */ - } /* we have a time condition */ - - } /* this is HTTP */ - } /* this is the first time we write a body part */ - bodywrites++; - - if(conn->bits.chunk) { - /* - * Bless me father for I have sinned. Here comes a chunked - * transfer flying and we need to decode this properly. While - * the name says read, this function both reads and writes away - * the data. The returned 'nread' holds the number of actual - * data it wrote to the client. */ - CHUNKcode res = - Curl_httpchunk_read(conn, str, nread, &nread); - - if(CHUNKE_OK < res) { - failf(data, "Receeived problem in the chunky parser"); - return CURLE_READ_ERROR; - } - else if(CHUNKE_STOP == res) { - /* we're done reading chunks! */ - keepon &= ~KEEP_READ; /* read no more */ - FD_ZERO(&rkeepfd); - - /* There are now possibly N number of bytes at the end of the - str buffer that weren't written to the client, but we don't - care about them right now. */ - } - /* If it returned OK, we just keep going */ + if(0 == k->bodywrites) { + /* These checks are only made the first time we are about to + write a piece of the body */ + if(conn->protocol&PROT_HTTP) { + /* HTTP-only checks */ + if (conn->newurl) { + /* abort after the headers if "follow Location" is set */ + infof (data, "Follow to new URL: %s\n", conn->newurl); + return CURLE_OK; } + else if (conn->resume_from && + !k->content_range && + (data->set.httpreq==HTTPREQ_GET)) { + /* we wanted to resume a download, although the server + doesn't seem to support this and we did this with a GET + (if it wasn't a GET we did a POST or PUT resume) */ + failf (data, "HTTP server doesn't seem to support " + "byte ranges. Cannot resume."); + return CURLE_HTTP_RANGE_ERROR; + } + else if(data->set.timecondition && !conn->range) { + /* A time condition has been set AND no ranges have been + requested. This seems to be what chapter 13.3.4 of + RFC 2616 defines to be the correct action for a + HTTP/1.1 client */ + if((k->timeofdoc > 0) && (data->set.timevalue > 0)) { + switch(data->set.timecondition) { + case TIMECOND_IFMODSINCE: + default: + if(k->timeofdoc < data->set.timevalue) { + infof(data, + "The requested document is not new enough\n"); + return CURLE_OK; + } + break; + case TIMECOND_IFUNMODSINCE: + if(k->timeofdoc > data->set.timevalue) { + infof(data, + "The requested document is not old enough\n"); + return CURLE_OK; + } + break; + } /* switch */ + } /* two valid time strings */ + } /* we have a time condition */ - if((-1 != conn->maxdownload) && - (bytecount + nread >= conn->maxdownload)) { - nread = conn->maxdownload - bytecount; - if((signed int)nread < 0 ) /* this should be unusual */ - nread = 0; + } /* this is HTTP */ + } /* this is the first time we write a body part */ + k->bodywrites++; - keepon &= ~KEEP_READ; /* we're done reading */ - FD_ZERO(&rkeepfd); - } + if(conn->bits.chunk) { + /* + * Bless me father for I have sinned. Here comes a chunked + * transfer flying and we need to decode this properly. While + * the name says read, this function both reads and writes away + * the data. The returned 'nread' holds the number of actual + * data it wrote to the client. */ + CHUNKcode res = + Curl_httpchunk_read(conn, k->str, nread, &nread); + + if(CHUNKE_OK < res) { + failf(data, "Receeived problem in the chunky parser"); + return CURLE_READ_ERROR; + } + else if(CHUNKE_STOP == res) { + /* we're done reading chunks! */ + k->keepon &= ~KEEP_READ; /* read no more */ + FD_ZERO(&k->rkeepfd); + + /* There are now possibly N number of bytes at the end of the + str buffer that weren't written to the client, but we don't + care about them right now. */ + } + /* If it returned OK, we just keep going */ + } + + if((-1 != conn->maxdownload) && + (k->bytecount + nread >= conn->maxdownload)) { + nread = conn->maxdownload - k->bytecount; + if((signed int)nread < 0 ) /* this should be unusual */ + nread = 0; + + k->keepon &= ~KEEP_READ; /* we're done reading */ + FD_ZERO(&k->rkeepfd); + } - bytecount += nread; + k->bytecount += nread; - Curl_pgrsSetDownloadCounter(data, (double)bytecount); + Curl_pgrsSetDownloadCounter(data, (double)k->bytecount); - if(!conn->bits.chunk && nread) { - /* If this is chunky transfer, it was already written */ - urg = Curl_client_write(data, CLIENTWRITE_BODY, str, nread); - if(urg) - return urg; - } + if(!conn->bits.chunk && nread) { + /* If this is chunky transfer, it was already written */ + result = Curl_client_write(data, CLIENTWRITE_BODY, k->str, + nread); + if(result) + return result; + } - } /* if (! header and data to read ) */ - } /* if( read from socket ) */ + } /* if (! header and data to read ) */ + } /* if( read from socket ) */ - if((keepon & KEEP_WRITE) && FD_ISSET(conn->writesockfd, &writefd)) { - /* write */ + if((k->keepon & KEEP_WRITE) && + FD_ISSET(conn->writesockfd, &k->writefd)) { + /* write */ - int i, si; - size_t bytes_written; + int i, si; + size_t bytes_written; - nread = data->set.fread(buf, 1, conn->upload_bufsize, data->set.in); + if ((k->bytecount == 0) && (k->writebytecount == 0)) + Curl_pgrsTime(data, TIMER_STARTTRANSFER); - /* the signed int typecase of nread of for systems that has - unsigned size_t */ - if ((signed int)nread<=0) { - /* done */ - keepon &= ~KEEP_WRITE; /* we're done writing */ - FD_ZERO(&wkeepfd); - break; - } - writebytecount += nread; - Curl_pgrsSetUploadCounter(data, (double)writebytecount); - - /* convert LF to CRLF if so asked */ - if (data->set.crlf) { - for(i = 0, si = 0; i < (int)nread; i++, si++) { - if (buf[i] == 0x0a) { - data->state.scratch[si++] = 0x0d; - data->state.scratch[si] = 0x0a; - } - else { - data->state.scratch[si] = buf[i]; - } - } - nread = si; - buf = data->state.scratch; /* point to the new buffer */ - } + didwhat |= KEEP_WRITE; - /* write to socket */ - urg = Curl_write(conn, conn->writesockfd, buf, nread, - &bytes_written); + nread = data->set.fread(k->buf, 1, conn->upload_bufsize, + data->set.in); - if(nread != (int)bytes_written) { - failf(data, "Failed uploading data"); - return CURLE_WRITE_ERROR; + /* the signed int typecase of nread of for systems that has + unsigned size_t */ + if ((signed int)nread<=0) { + /* done */ + k->keepon &= ~KEEP_WRITE; /* we're done writing */ + FD_ZERO(&k->wkeepfd); + break; + } + k->writebytecount += nread; + Curl_pgrsSetUploadCounter(data, (double)k->writebytecount); + + /* convert LF to CRLF if so asked */ + if (data->set.crlf) { + for(i = 0, si = 0; i < (int)nread; i++, si++) { + if (k->buf[i] == 0x0a) { + data->state.scratch[si++] = 0x0d; + data->state.scratch[si] = 0x0a; + } + else { + data->state.scratch[si] = k->buf[i]; } - if(data->set.crlf) - buf = data->state.buffer; /* put it back on the buffer */ - } + nread = si; + k->buf = data->state.scratch; /* point to the new buffer */ + } - break; + /* write to socket */ + result = Curl_write(conn, conn->writesockfd, k->buf, nread, + &bytes_written); + if(result) + return result; + else if(nread != (int)bytes_written) { + failf(data, "Failed uploading data"); + return CURLE_WRITE_ERROR; } + else if(data->set.crlf) + k->buf = data->state.buffer; /* put it back on the buffer */ - /* Update read/write counters */ - if(conn->bytecountp) - *conn->bytecountp = bytecount; /* read count */ - if(conn->writebytecountp) - *conn->writebytecountp = writebytecount; /* write count */ + } - now = Curl_tvnow(); - if(Curl_pgrsUpdate(conn)) - urg = CURLE_ABORTED_BY_CALLBACK; - else - urg = Curl_speedcheck (data, now); - if (urg) - return urg; - - if(data->progress.ulspeed > conn->upload_bufsize) { - /* If we're transfering more data per second than fits in our buffer, - we increase the buffer size to adjust to the current - speed. However, we must not set it larger than BUFSIZE. We don't - adjust it downwards again since we don't see any point in that! - */ - conn->upload_bufsize=(long)min(data->progress.ulspeed, BUFSIZE); - } + } while(0); /* just to break out from! */ - if (data->set.timeout && - ((Curl_tvdiff(now, start)/1000) >= data->set.timeout)) { - failf (data, "Operation timed out with %d out of %d bytes received", - bytecount, conn->size); - return CURLE_OPERATION_TIMEOUTED; - } + if(didwhat) { + /* Update read/write counters */ + if(conn->bytecountp) + *conn->bytecountp = k->bytecount; /* read count */ + if(conn->writebytecountp) + *conn->writebytecountp = k->writebytecount; /* write count */ + } + else { + /* no read no write, this is a timeout? */ + if (k->write_after_100_header) { + /* This should allow some time for the header to arrive, but only a + very short time as otherwise it'll be too much wasted times too + often. */ + k->write_after_100_header = FALSE; + FD_SET (conn->writesockfd, &k->writefd); /* write socket */ + k->keepon |= KEEP_WRITE; + k->wkeepfd = k->writefd; + } + } + k->now = Curl_tvnow(); + if(Curl_pgrsUpdate(conn)) + result = CURLE_ABORTED_BY_CALLBACK; + else + result = Curl_speedcheck (data, k->now); + if (result) + return result; + + if(data->progress.ulspeed > conn->upload_bufsize) { + /* If we're transfering more data per second than fits in our buffer, + we increase the buffer size to adjust to the current + speed. However, we must not set it larger than BUFSIZE. We don't + adjust it downwards again since we don't see any point in that! + */ + conn->upload_bufsize=(long)min(data->progress.ulspeed, BUFSIZE); + } + + if (data->set.timeout && + ((Curl_tvdiff(k->now, k->start)/1000) >= data->set.timeout)) { + failf (data, "Operation timed out with %d out of %d bytes received", + k->bytecount, conn->size); + return CURLE_OPERATION_TIMEOUTED; + } + + if(!k->keepon) { + /* + * The transfer has been performed. Just make some general checks before + * returning. + */ + + if(!(data->set.no_body) && k->contentlength && + (k->bytecount != k->contentlength) && + !conn->newurl) { + failf(data, "transfer closed with %d bytes remaining to read", + k->contentlength-k->bytecount); + return CURLE_PARTIAL_FILE; } + else if(conn->bits.chunk && conn->proto.http->chunk.datasize) { + failf(data, "transfer closed with at least %d bytes remaining", + conn->proto.http->chunk.datasize); + return CURLE_PARTIAL_FILE; + } + if(Curl_pgrsUpdate(conn)) + return CURLE_ABORTED_BY_CALLBACK; } - /* - * The tranfer has been performed. Just make some general checks before - * returning. - */ + /* Now update the "done" boolean we return */ + *done = !k->keepon; + + return CURLE_OK; +} + +CURLcode Curl_readwrite_init(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + struct Curl_transfer_keeper *k = &conn->keep; + + memset(k, 0, sizeof(struct Curl_transfer_keeper)); + + k->start = Curl_tvnow(); /* start time */ + k->now = k->start; /* current time is now */ + k->header = TRUE; /* assume header */ + k->httpversion = -1; /* unknown at this point */ + k->conn = (struct connectdata *)conn; /* store the connection */ + + data = conn->data; /* there's the root struct */ + k->buf = data->state.buffer; + k->maxfd = (conn->sockfd>conn->writesockfd? + conn->sockfd:conn->writesockfd)+1; + k->hbufp = data->state.headerbuff; - if(!(data->set.no_body) && contentlength && - (bytecount != contentlength)) { - failf(data, "transfer closed with %d bytes remaining to read", - contentlength-bytecount); - return CURLE_PARTIAL_FILE; + Curl_pgrsTime(data, TIMER_PRETRANSFER); + Curl_speedinit(data); + + if (!conn->getheader) { + k->header = FALSE; + if(conn->size > 0) + Curl_pgrsSetDownloadSize(data, conn->size); } - else if(conn->bits.chunk && conn->proto.http->chunk.datasize) { - failf(data, "transfer closed with at least %d bytes remaining", - conn->proto.http->chunk.datasize); - return CURLE_PARTIAL_FILE; + /* we want header and/or body, if neither then don't do this! */ + if(conn->getheader || !data->set.no_body) { + + FD_ZERO (&k->readfd); /* clear it */ + if(conn->sockfd != -1) { + FD_SET (conn->sockfd, &k->readfd); /* read socket */ + k->keepon |= KEEP_READ; + } + + FD_ZERO (&k->writefd); /* clear it */ + if(conn->writesockfd != -1) { + if (data->set.expect100header) + /* wait with write until we either got 100-continue or a timeout */ + k->write_after_100_header = TRUE; + else { + FD_SET (conn->writesockfd, &k->writefd); /* write socket */ + k->keepon |= KEEP_WRITE; + } + } + + /* get these in backup variables to be able to restore them on each lap in + the select() loop */ + k->rkeepfd = k->readfd; + k->wkeepfd = k->writefd; + } - if(Curl_pgrsUpdate(conn)) - return CURLE_ABORTED_BY_CALLBACK; return CURLE_OK; } -CURLcode Curl_perform(struct SessionHandle *data) +void Curl_single_fdset(struct connectdata *conn, + fd_set *read_fd_set, + fd_set *write_fd_set, + fd_set *exc_fd_set, + int *max_fd) { - CURLcode res; - struct connectdata *conn=NULL; - bool port=TRUE; /* allow data->set.use_port to set port to use */ - char *newurl = NULL; /* possibly a new URL to follow to! */ -#ifdef HAVE_SIGNAL - /* storage for the previous bag^H^H^HSIGPIPE signal handler :-) */ - void (*prev_signal)(int sig); + *max_fd = -1; /* init */ + if(conn->keep.keepon & KEEP_READ) { + FD_SET(conn->sockfd, read_fd_set); + *max_fd = conn->sockfd; + } + if(conn->keep.keepon & KEEP_WRITE) { + FD_SET(conn->writesockfd, write_fd_set); + if(conn->writesockfd > *max_fd) + *max_fd = conn->writesockfd; + } + /* we don't use exceptions, only touch that one to prevent compiler + warnings! */ + *exc_fd_set = *exc_fd_set; +} + + +/* + * Transfer() + * + * This function is what performs the actual transfer. It is capable of + * doing both ways simultaneously. + * The transfer must already have been setup by a call to Curl_Transfer(). + * + * Note that headers are created in a preallocated buffer of a default size. + * That buffer can be enlarged on demand, but it is never shrinken again. + * + * Parts of this function was once written by the friendly Mark Butler + * . + */ + +static CURLcode +Transfer(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + CURLcode result; + struct Curl_transfer_keeper *k = &conn->keep; + bool done=FALSE; + + Curl_readwrite_init(conn); + + if((conn->sockfd == -1) && (conn->writesockfd == -1)) + /* nothing to read, nothing to write, we're already OK! */ + return CURLE_OK; + + /* we want header and/or body, if neither then don't do this! */ + if(!conn->getheader && data->set.no_body) + return CURLE_OK; + + while (!done) { + struct timeval interval; + k->readfd = k->rkeepfd; /* set these every lap in the loop */ + k->writefd = k->wkeepfd; + interval.tv_sec = 1; + interval.tv_usec = 0; + + switch (select (k->maxfd, &k->readfd, &k->writefd, NULL, + &interval)) { + case -1: /* select() error, stop reading */ +#ifdef EINTR + /* The EINTR is not serious, and it seems you might get this more + ofen when using the lib in a multi-threaded environment! */ + if(errno == EINTR) + ; + else #endif + done = TRUE; /* no more read or write */ + continue; + case 0: /* timeout */ + result = Curl_readwrite(conn, &done); + break; + default: /* readable descriptors */ + result = Curl_readwrite(conn, &done); + break; + } + if(result) + return result; + + /* "done" signals to us if the transfer(s) are ready */ + } + return CURLE_OK; +} + +CURLcode Curl_pretransfer(struct SessionHandle *data) +{ if(!data->change.url) /* we can't do anything wihout URL */ return CURLE_URL_MALFORMAT; @@ -922,16 +973,45 @@ CURLcode Curl_perform(struct SessionHandle *data) data->state.this_is_a_follow = FALSE; /* reset this */ data->state.errorbuf = FALSE; /* no error has occurred */ + /* Allow data->set.use_port to set which port to use. This needs to be + * disabled for example when we follow Location: headers to URLs using + * different ports! */ + data->state.allow_port = TRUE; + #if defined(HAVE_SIGNAL) && defined(SIGPIPE) /************************************************************* * Tell signal handler to ignore SIGPIPE *************************************************************/ - prev_signal = signal(SIGPIPE, SIG_IGN); + data->state.prev_signal = signal(SIGPIPE, SIG_IGN); #endif Curl_initinfo(data); /* reset session-specific information "variables" */ Curl_pgrsStartNow(data); + return CURLE_OK; +} + +CURLcode Curl_posttransfer(struct SessionHandle *data) +{ +#if defined(HAVE_SIGNAL) && defined(SIGPIPE) + /* restore the signal handler for SIGPIPE before we get back */ + signal(SIGPIPE, data->state.prev_signal); +#endif + + return CURLE_OK; +} + +CURLcode Curl_perform(struct SessionHandle *data) +{ + CURLcode res; + CURLcode res2; + struct connectdata *conn=NULL; + char *newurl = NULL; /* possibly a new URL to follow to! */ + + res = Curl_pretransfer(data); + if(res) + return res; + /* * It is important that there is NO 'return' from this function any any * other place than falling down the bottom! This is because we have cleanup @@ -941,30 +1021,9 @@ CURLcode Curl_perform(struct SessionHandle *data) do { Curl_pgrsTime(data, TIMER_STARTSINGLE); - res = Curl_connect(data, &conn, port); + res = Curl_connect(data, &conn); if(res == CURLE_OK) { - res = Curl_do(conn); - - if((CURLE_WRITE_ERROR == res) && conn->bits.reuse) { - /* This was a re-use of a connection and we got a write error in the - * DO-phase. Then we DISCONNECT this connection and have another - * attempt to CONNECT and then DO again! The retry cannot possibly - * find another connection to re-use, since we only keep one possible - * connection for each. - */ - - infof(data, "The re-used connection seems dead, get a new one\n"); - - conn->bits.close = TRUE; /* enforce close of this connetion */ - res = Curl_done(conn); /* we are so done with this */ - if(CURLE_OK == res) { - /* Now, redo the connect */ - res = Curl_connect(data, &conn, port); - if(CURLE_OK == res) - /* ... finally back to actually retry the DO phase */ - res = Curl_do(conn); - } - } + res = Curl_do(&conn); if(res == CURLE_OK) { CURLcode res2; /* just a local extra result container */ @@ -1010,9 +1069,6 @@ CURLcode Curl_perform(struct SessionHandle *data) char prot[16]; /* URL protocol string storage */ char letter; /* used for a silly sscanf */ - port=TRUE; /* by default we use the user set port number even after - a Location: */ - if (data->set.maxredirs && (data->set.followlocation >= data->set.maxredirs)) { failf(data,"Maximum (%d) redirects followed", data->set.maxredirs); res=CURLE_TOO_MANY_REDIRECTS; @@ -1101,10 +1157,9 @@ CURLcode Curl_perform(struct SessionHandle *data) free(url_clone); newurl = newest; } - else { - /* This is an absolute URL, don't use the custom port number */ - port = FALSE; - } + else + /* This is an absolute URL, don't allow the custom port number */ + data->state.allow_port = FALSE; if(data->change.url_alloc) free(data->change.url); @@ -1182,10 +1237,11 @@ CURLcode Curl_perform(struct SessionHandle *data) if(newurl) free(newurl); -#if defined(HAVE_SIGNAL) && defined(SIGPIPE) - /* restore the signal handler for SIGPIPE before we get back */ - signal(SIGPIPE, prev_signal); -#endif + /* run post-transfer uncondionally, but don't clobber the return code if + we already have an error code recorder */ + res2 = Curl_posttransfer(data); + if(!res && res2) + res = res2; return res; } diff --git a/lib/transfer.h b/lib/transfer.h index c35f7c6fb..6f616c8ad 100644 --- a/lib/transfer.h +++ b/lib/transfer.h @@ -7,7 +7,7 @@ * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * - * Copyright (C) 2000, Daniel Stenberg, , et al. + * Copyright (C) 2001, Daniel Stenberg, , et al. * * In order to be useful for every potential user, curl and libcurl are * dual-licensed under the MPL and the MIT/X-derivate licenses. @@ -24,6 +24,17 @@ *****************************************************************************/ CURLcode Curl_perform(struct SessionHandle *data); +CURLcode Curl_pretransfer(struct SessionHandle *data); +CURLcode Curl_posttransfer(struct SessionHandle *data); + +CURLcode Curl_readwrite(struct connectdata *conn, bool *done); +void Curl_single_fdset(struct connectdata *conn, + fd_set *read_fd_set, + fd_set *write_fd_set, + fd_set *exc_fd_set, + int *max_fd); +CURLcode Curl_readwrite_init(struct connectdata *conn); + /* This sets up a forthcoming transfer */ CURLcode Curl_Transfer (struct connectdata *data, diff --git a/lib/url.c b/lib/url.c index 5a477a26d..3973902ef 100644 --- a/lib/url.c +++ b/lib/url.c @@ -1214,8 +1214,7 @@ static CURLcode ConnectPlease(struct connectdata *conn) } static CURLcode CreateConnection(struct SessionHandle *data, - struct connectdata **in_connect, - bool allow_port) /* allow set.use_port? */ + struct connectdata **in_connect) { char *tmp; char *buf; @@ -1614,7 +1613,8 @@ static CURLcode CreateConnection(struct SessionHandle *data, *************************************************************/ if (strequal(conn->protostr, "HTTP")) { - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_HTTP; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_HTTP; conn->remote_port = PORT_HTTP; conn->protocol |= PROT_HTTP; conn->curl_do = Curl_http; @@ -1624,7 +1624,8 @@ static CURLcode CreateConnection(struct SessionHandle *data, else if (strequal(conn->protostr, "HTTPS")) { #ifdef USE_SSLEAY - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_HTTPS; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_HTTPS; conn->remote_port = PORT_HTTPS; conn->protocol |= PROT_HTTP|PROT_HTTPS|PROT_SSL; @@ -1639,7 +1640,8 @@ static CURLcode CreateConnection(struct SessionHandle *data, #endif /* !USE_SSLEAY */ } else if (strequal(conn->protostr, "GOPHER")) { - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_GOPHER; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_GOPHER; conn->remote_port = PORT_GOPHER; /* Skip // in path if present */ if (isdigit((int)conn->path[1])) { @@ -1665,7 +1667,8 @@ static CURLcode CreateConnection(struct SessionHandle *data, #endif /* !USE_SSLEAY */ } - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_FTP; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_FTP; conn->remote_port = PORT_FTP; conn->protocol |= PROT_FTP; @@ -1720,21 +1723,24 @@ static CURLcode CreateConnection(struct SessionHandle *data, /* telnet testing factory */ conn->protocol |= PROT_TELNET; - conn->port = (data->set.use_port && allow_port)?data->set.use_port: PORT_TELNET; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port: PORT_TELNET; conn->remote_port = PORT_TELNET; conn->curl_do = Curl_telnet; conn->curl_done = Curl_telnet_done; } else if (strequal(conn->protostr, "DICT")) { conn->protocol |= PROT_DICT; - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_DICT; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_DICT; conn->remote_port = PORT_DICT; conn->curl_do = Curl_dict; conn->curl_done = NULL; /* no DICT-specific done */ } else if (strequal(conn->protostr, "LDAP")) { conn->protocol |= PROT_LDAP; - conn->port = (data->set.use_port && allow_port)?data->set.use_port:PORT_LDAP; + conn->port = (data->set.use_port && data->state.allow_port)? + data->set.use_port:PORT_LDAP; conn->remote_port = PORT_LDAP; conn->curl_do = Curl_ldap; conn->curl_done = NULL; /* no LDAP-specific done */ @@ -2228,14 +2234,13 @@ static CURLcode CreateConnection(struct SessionHandle *data, } CURLcode Curl_connect(struct SessionHandle *data, - struct connectdata **in_connect, - bool allow_port) + struct connectdata **in_connect) { CURLcode code; struct connectdata *conn; /* call the stuff that needs to be called */ - code = CreateConnection(data, in_connect, allow_port); + code = CreateConnection(data, in_connect); if(CURLE_OK != code) { /* We're not allowed to return failure with memory left allocated @@ -2291,14 +2296,38 @@ CURLcode Curl_done(struct connectdata *conn) return result; } -CURLcode Curl_do(struct connectdata *conn) +CURLcode Curl_do(struct connectdata **connp) { CURLcode result=CURLE_OK; + struct connectdata *conn = *connp; + struct SessionHandle *data=conn->data; - if(conn->curl_do) + if(conn->curl_do) { /* generic protocol-specific function pointer set in curl_connect() */ result = conn->curl_do(conn); + /* This was formerly done in transfer.c, but we better do it here */ + + if((CURLE_WRITE_ERROR == result) && conn->bits.reuse) { + /* This was a re-use of a connection and we got a write error in the + * DO-phase. Then we DISCONNECT this connection and have another attempt + * to CONNECT and then DO again! The retry cannot possibly find another + * connection to re-use, since we only keep one possible connection for + * each. */ + + infof(data, "Re-used connection seems dead, get a new one\n"); + + conn->bits.close = TRUE; /* enforce close of this connetion */ + result = Curl_done(conn); /* we are so done with this */ + if(CURLE_OK == result) { + /* Now, redo the connect and get a new connection */ + result = Curl_connect(data, connp); + if(CURLE_OK == result) + /* ... finally back to actually retry the DO phase */ + result = conn->curl_do(*connp); + } + } + } return result; } diff --git a/lib/url.h b/lib/url.h index c842a97f2..de3c02ef2 100644 --- a/lib/url.h +++ b/lib/url.h @@ -7,7 +7,7 @@ * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * - * Copyright (C) 2000, Daniel Stenberg, , et al. + * Copyright (C) 2001, Daniel Stenberg, , et al. * * In order to be useful for every potential user, curl and libcurl are * dual-licensed under the MPL and the MIT/X-derivate licenses. @@ -29,11 +29,9 @@ CURLcode Curl_open(struct SessionHandle **curl); CURLcode Curl_setopt(struct SessionHandle *data, CURLoption option, ...); -CURLcode Curl_close(struct SessionHandle *data); /* the opposite of curl_open() */ -CURLcode Curl_connect(struct SessionHandle *, - struct connectdata **, - bool allow_port); -CURLcode Curl_do(struct connectdata *); +CURLcode Curl_close(struct SessionHandle *data); /* opposite of curl_open() */ +CURLcode Curl_connect(struct SessionHandle *, struct connectdata **); +CURLcode Curl_do(struct connectdata **); CURLcode Curl_done(struct connectdata *); CURLcode Curl_disconnect(struct connectdata *); diff --git a/lib/urldata.h b/lib/urldata.h index 00ef3b355..b7f3a2f21 100644 --- a/lib/urldata.h +++ b/lib/urldata.h @@ -211,6 +211,57 @@ struct ConnectBits { complete */ }; +/* + * This struct is all the previously local variables from Curl_perform() moved + * to struct to allow the function to return and get re-invoked better without + * losing state. + */ + +struct Curl_transfer_keeper { + int bytecount; /* total number of bytes read */ + int writebytecount; /* number of bytes written */ + long contentlength; /* size of incoming data */ + struct timeval start; /* transfer started at this time */ + struct timeval now; /* current time */ + bool header; /* incoming data has HTTP header */ + int headerline; /* counts header lines to better track the + first one */ + char *hbufp; /* points at *end* of header line */ + int hbuflen; + char *str; /* within buf */ + char *str_start; /* within buf */ + char *end_ptr; /* within buf */ + char *p; /* within headerbuff */ + bool content_range; /* set TRUE if Content-Range: was found */ + int offset; /* possible resume offset read from the + Content-Range: header */ + int httpcode; /* error code from the 'HTTP/1.? XXX' line */ + int httpversion; /* the HTTP version*10 */ + bool write_after_100_header; /* should we enable the write after + we received a 100-continue/timeout + or directly */ + + /* for the low speed checks: */ + time_t timeofdoc; + long bodywrites; + int writetype; + + /* the highest fd we use + 1 */ + struct SessionHandle *data; + struct connectdata *conn; + char *buf; + int maxfd; + + /* the file descriptors to play with */ + fd_set readfd; + fd_set writefd; + fd_set rkeepfd; + fd_set wkeepfd; + int keepon; + +}; + + /* * The connectdata struct contains all fields and variables that should be * unique for an entire connection. @@ -355,6 +406,8 @@ struct connectdata { void *generic; } proto; + /* This struct is inited when needed */ + struct Curl_transfer_keeper keep; }; /* @@ -460,6 +513,13 @@ struct UrlState { bool errorbuf; /* Set to TRUE if the error buffer is already filled in. This must be set to FALSE every time _easy_perform() is called. */ + +#ifdef HAVE_SIGNAL + /* storage for the previous bag^H^H^HSIGPIPE signal handler :-) */ + void (*prev_signal)(int sig); +#endif + bool allow_port; /* Is set.use_port allowed to take effect or not. This + is always set TRUE when curl_easy_perform() is called. */ }; @@ -569,7 +629,6 @@ struct UserDefined { bool hide_progress; bool http_fail_on_error; bool http_follow_location; - bool include_header; #define http_include_header include_header /* former name */ -- cgit v1.2.3