/*************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) 1998 - 2008, Daniel Stenberg, , et al. * * This software is licensed as described in the file COPYING, which * you should have received as part of this distribution. The terms * are also available at http://curl.haxx.se/docs/copyright.html. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the COPYING file. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * * $Id$ ***************************************************************************/ #include "setup.h" #include #ifdef NEED_MALLOC_H #include #endif #ifdef HAVE_SYS_SOCKET_H #include #endif #ifdef HAVE_NETINET_IN_H #include #endif #ifdef HAVE_NETDB_H #include #endif #ifdef HAVE_ARPA_INET_H #include #endif #ifdef HAVE_STDLIB_H #include /* required for free() prototypes */ #endif #ifdef HAVE_UNISTD_H #include /* for the close() proto */ #endif #ifdef VMS #include #include #include #endif #ifdef HAVE_SETJMP_H #include #endif #ifdef HAVE_SIGNAL_H #include #endif #ifdef HAVE_PROCESS_H #include #endif #include "urldata.h" #include "sendf.h" #include "hostip.h" #include "hash.h" #include "share.h" #include "strerror.h" #include "url.h" #include "inet_ntop.h" #define _MPRINTF_REPLACE /* use our functions only */ #include #include "memory.h" /* The last #include file should be: */ #include "memdebug.h" #if defined(HAVE_ALARM) && defined(SIGALRM) && defined(HAVE_SIGSETJMP) \ && !defined(USE_ARES) /* alarm-based timeouts can only be used with all the dependencies satisfied */ #define USE_ALARM_TIMEOUT #endif /* * hostip.c explained * ================== * * The main COMPILE-TIME DEFINES to keep in mind when reading the host*.c * source file are these: * * CURLRES_IPV6 - this host has getaddrinfo() and family, and thus we use * that. The host may not be able to resolve IPv6, but we don't really have to * take that into account. Hosts that aren't IPv6-enabled have CURLRES_IPV4 * defined. * * CURLRES_ARES - is defined if libcurl is built to use c-ares for * asynchronous name resolves. This can be Windows or *nix. * * CURLRES_THREADED - is defined if libcurl is built to run under (native) * Windows, and then the name resolve will be done in a new thread, and the * supported API will be the same as for ares-builds. * * If any of the two previous are defined, CURLRES_ASYNCH is defined too. If * libcurl is not built to use an asynchronous resolver, CURLRES_SYNCH is * defined. * * The host*.c sources files are split up like this: * * hostip.c - method-independent resolver functions and utility functions * hostasyn.c - functions for asynchronous name resolves * hostsyn.c - functions for synchronous name resolves * hostares.c - functions for ares-using name resolves * hostthre.c - functions for threaded name resolves * hostip4.c - ipv4-specific functions * hostip6.c - ipv6-specific functions * * The hostip.h is the united header file for all this. It defines the * CURLRES_* defines based on the config*.h and setup.h defines. */ /* These two symbols are for the global DNS cache */ static struct curl_hash hostname_cache; static int host_cache_initialized; static void freednsentry(void *freethis); /* * Curl_global_host_cache_init() initializes and sets up a global DNS cache. * Global DNS cache is general badness. Do not use. This will be removed in * a future version. Use the share interface instead! * * Returns a struct curl_hash pointer on success, NULL on failure. */ struct curl_hash *Curl_global_host_cache_init(void) { int rc = 0; if(!host_cache_initialized) { rc = Curl_hash_init(&hostname_cache, 7, Curl_hash_str, Curl_str_key_compare, freednsentry); if(!rc) host_cache_initialized = 1; } return rc?NULL:&hostname_cache; } /* * Destroy and cleanup the global DNS cache */ void Curl_global_host_cache_dtor(void) { if(host_cache_initialized) { Curl_hash_clean(&hostname_cache); host_cache_initialized = 0; } } /* * Return # of adresses in a Curl_addrinfo struct */ int Curl_num_addresses(const Curl_addrinfo *addr) { int i; for (i = 0; addr; addr = addr->ai_next, i++) ; /* empty loop */ return i; } /* * Curl_printable_address() returns a printable version of the 1st address * given in the 'ip' argument. The result will be stored in the buf that is * bufsize bytes big. * * If the conversion fails, it returns NULL. */ const char *Curl_printable_address(const Curl_addrinfo *ip, char *buf, size_t bufsize) { const void *ip4 = &((const struct sockaddr_in*)ip->ai_addr)->sin_addr; int af = ip->ai_family; #ifdef CURLRES_IPV6 const void *ip6 = &((const struct sockaddr_in6*)ip->ai_addr)->sin6_addr; #else const void *ip6 = NULL; #endif return Curl_inet_ntop(af, af == AF_INET ? ip4 : ip6, buf, bufsize); } /* * Return a hostcache id string for the providing host + port, to be used by * the DNS caching. */ static char * create_hostcache_id(const char *server, int port) { /* create and return the new allocated entry */ return aprintf("%s:%d", server, port); } struct hostcache_prune_data { long cache_timeout; time_t now; }; /* * This function is set as a callback to be called for every entry in the DNS * cache when we want to prune old unused entries. * * Returning non-zero means remove the entry, return 0 to keep it in the * cache. */ static int hostcache_timestamp_remove(void *datap, void *hc) { struct hostcache_prune_data *data = (struct hostcache_prune_data *) datap; struct Curl_dns_entry *c = (struct Curl_dns_entry *) hc; if((data->now - c->timestamp < data->cache_timeout) || c->inuse) { /* please don't remove */ return 0; } /* fine, remove */ return 1; } /* * Prune the DNS cache. This assumes that a lock has already been taken. */ static void hostcache_prune(struct curl_hash *hostcache, long cache_timeout, time_t now) { struct hostcache_prune_data user; user.cache_timeout = cache_timeout; user.now = now; Curl_hash_clean_with_criterium(hostcache, (void *) &user, hostcache_timestamp_remove); } /* * Library-wide function for pruning the DNS cache. This function takes and * returns the appropriate locks. */ void Curl_hostcache_prune(struct SessionHandle *data) { time_t now; if((data->set.dns_cache_timeout == -1) || !data->dns.hostcache) /* cache forever means never prune, and NULL hostcache means we can't do it */ return; if(data->share) Curl_share_lock(data, CURL_LOCK_DATA_DNS, CURL_LOCK_ACCESS_SINGLE); time(&now); /* Remove outdated and unused entries from the hostcache */ hostcache_prune(data->dns.hostcache, data->set.dns_cache_timeout, now); if(data->share) Curl_share_unlock(data, CURL_LOCK_DATA_DNS); } /* * Check if the entry should be pruned. Assumes a locked cache. */ static int remove_entry_if_stale(struct SessionHandle *data, struct Curl_dns_entry *dns) { struct hostcache_prune_data user; if( !dns || (data->set.dns_cache_timeout == -1) || !data->dns.hostcache) /* cache forever means never prune, and NULL hostcache means we can't do it */ return 0; time(&user.now); user.cache_timeout = data->set.dns_cache_timeout; if( !hostcache_timestamp_remove(&user,dns) ) return 0; Curl_hash_clean_with_criterium(data->dns.hostcache, (void *) &user, hostcache_timestamp_remove); return 1; } #ifdef HAVE_SIGSETJMP /* Beware this is a global and unique instance. This is used to store the return address that we can jump back to from inside a signal handler. This is not thread-safe stuff. */ sigjmp_buf curl_jmpenv; #endif /* * Curl_cache_addr() stores a 'Curl_addrinfo' struct in the DNS cache. * * When calling Curl_resolv() has resulted in a response with a returned * address, we call this function to store the information in the dns * cache etc * * Returns the Curl_dns_entry entry pointer or NULL if the storage failed. */ struct Curl_dns_entry * Curl_cache_addr(struct SessionHandle *data, Curl_addrinfo *addr, const char *hostname, int port) { char *entry_id; size_t entry_len; struct Curl_dns_entry *dns; struct Curl_dns_entry *dns2; time_t now; /* Create an entry id, based upon the hostname and port */ entry_id = create_hostcache_id(hostname, port); /* If we can't create the entry id, fail */ if(!entry_id) return NULL; entry_len = strlen(entry_id); /* Create a new cache entry */ dns = calloc(sizeof(struct Curl_dns_entry), 1); if(!dns) { free(entry_id); return NULL; } dns->inuse = 0; /* init to not used */ dns->addr = addr; /* this is the address(es) */ /* Store the resolved data in our DNS cache. This function may return a pointer to an existing struct already present in the hash, and it may return the same argument we pass in. Make no assumptions. */ dns2 = Curl_hash_add(data->dns.hostcache, entry_id, entry_len+1, (void *)dns); if(!dns2) { /* Major badness, run away. */ free(dns); free(entry_id); return NULL; } time(&now); dns = dns2; dns->timestamp = now; /* used now */ dns->inuse++; /* mark entry as in-use */ /* free the allocated entry_id again */ free(entry_id); return dns; } /* * Curl_resolv() is the main name resolve function within libcurl. It resolves * a name and returns a pointer to the entry in the 'entry' argument (if one * is provided). This function might return immediately if we're using asynch * resolves. See the return codes. * * The cache entry we return will get its 'inuse' counter increased when this * function is used. You MUST call Curl_resolv_unlock() later (when you're * done using this struct) to decrease the counter again. * * Return codes: * * CURLRESOLV_ERROR (-1) = error, no pointer * CURLRESOLV_RESOLVED (0) = OK, pointer provided * CURLRESOLV_PENDING (1) = waiting for response, no pointer */ int Curl_resolv(struct connectdata *conn, const char *hostname, int port, struct Curl_dns_entry **entry) { char *entry_id = NULL; struct Curl_dns_entry *dns = NULL; size_t entry_len; struct SessionHandle *data = conn->data; CURLcode result; int rc = CURLRESOLV_ERROR; /* default to failure */ *entry = NULL; /* Create an entry id, based upon the hostname and port */ entry_id = create_hostcache_id(hostname, port); /* If we can't create the entry id, fail */ if(!entry_id) return rc; entry_len = strlen(entry_id); if(data->share) Curl_share_lock(data, CURL_LOCK_DATA_DNS, CURL_LOCK_ACCESS_SINGLE); /* See if its already in our dns cache */ dns = Curl_hash_pick(data->dns.hostcache, entry_id, entry_len+1); /* See whether the returned entry is stale. Done before we release lock */ if( remove_entry_if_stale(data, dns) ) dns = NULL; /* the memory deallocation is being handled by the hash */ if(dns) { dns->inuse++; /* we use it! */ rc = CURLRESOLV_RESOLVED; } if(data->share) Curl_share_unlock(data, CURL_LOCK_DATA_DNS); /* free the allocated entry_id again */ free(entry_id); if(!dns) { /* The entry was not in the cache. Resolve it to IP address */ Curl_addrinfo *addr; int respwait; /* Check what IP specifics the app has requested and if we can provide it. * If not, bail out. */ if(!Curl_ipvalid(data)) return CURLRESOLV_ERROR; /* If Curl_getaddrinfo() returns NULL, 'respwait' might be set to a non-zero value indicating that we need to wait for the response to the resolve call */ addr = Curl_getaddrinfo(conn, hostname, port, &respwait); if(!addr) { if(respwait) { /* the response to our resolve call will come asynchronously at a later time, good or bad */ /* First, check that we haven't received the info by now */ result = Curl_is_resolved(conn, &dns); if(result) /* error detected */ return CURLRESOLV_ERROR; if(dns) rc = CURLRESOLV_RESOLVED; /* pointer provided */ else rc = CURLRESOLV_PENDING; /* no info yet */ } } else { if(data->share) Curl_share_lock(data, CURL_LOCK_DATA_DNS, CURL_LOCK_ACCESS_SINGLE); /* we got a response, store it in the cache */ dns = Curl_cache_addr(data, addr, hostname, port); if(data->share) Curl_share_unlock(data, CURL_LOCK_DATA_DNS); if(!dns) /* returned failure, bail out nicely */ Curl_freeaddrinfo(addr); else rc = CURLRESOLV_RESOLVED; } } *entry = dns; return rc; } #ifdef USE_ALARM_TIMEOUT /* * This signal handler jumps back into the main libcurl code and continues * execution. This effectively causes the remainder of the application to run * within a signal handler which is nonportable and could lead to problems. */ static RETSIGTYPE alarmfunc(int sig) { /* this is for "-ansi -Wall -pedantic" to stop complaining! (rabe) */ (void)sig; siglongjmp(curl_jmpenv, 1); return; } #endif /* USE_ALARM_TIMEOUT */ /* * Curl_resolv_timeout() is the same as Curl_resolv() but specifies a * timeout. This function might return immediately if we're using asynch * resolves. See the return codes. * * The cache entry we return will get its 'inuse' counter increased when this * function is used. You MUST call Curl_resolv_unlock() later (when you're * done using this struct) to decrease the counter again. * * If built with a synchronous resolver and use of signals is not * disabled by the application, then a nonzero timeout will cause a * timeout after the specified number of milliseconds. Otherwise, timeout * is ignored. * * Return codes: * * CURLRESOLV_TIMEDOUT(-2) = warning, time too short or previous alarm expired * CURLRESOLV_ERROR (-1) = error, no pointer * CURLRESOLV_RESOLVED (0) = OK, pointer provided * CURLRESOLV_PENDING (1) = waiting for response, no pointer */ int Curl_resolv_timeout(struct connectdata *conn, const char *hostname, int port, struct Curl_dns_entry **entry, long timeoutms) { #ifdef USE_ALARM_TIMEOUT #ifdef HAVE_SIGACTION struct sigaction keep_sigact; /* store the old struct here */ bool keep_copysig=FALSE; /* did copy it? */ struct sigaction sigact; #else #ifdef HAVE_SIGNAL void (*keep_sigact)(int); /* store the old handler here */ #endif /* HAVE_SIGNAL */ #endif /* HAVE_SIGACTION */ volatile long timeout; unsigned int prev_alarm=0; struct SessionHandle *data = conn->data; #endif /* USE_ALARM_TIMEOUT */ int rc; *entry = NULL; #ifdef USE_ALARM_TIMEOUT if (data->set.no_signal) /* Ignore the timeout when signals are disabled */ timeout = 0; else timeout = timeoutms; if(timeout && timeout < 1000) /* The alarm() function only provides integer second resolution, so if we want to wait less than one second we must bail out already now. */ return CURLRESOLV_TIMEDOUT; if (timeout > 0) { /* This allows us to time-out from the name resolver, as the timeout will generate a signal and we will siglongjmp() from that here. This technique has problems (see alarmfunc). */ if(sigsetjmp(curl_jmpenv, 1)) { /* this is coming from a siglongjmp() after an alarm signal */ failf(data, "name lookup timed out"); return CURLRESOLV_ERROR; } /************************************************************* * Set signal handler to catch SIGALRM * Store the old value to be able to set it back later! *************************************************************/ #ifdef HAVE_SIGACTION sigaction(SIGALRM, NULL, &sigact); keep_sigact = sigact; keep_copysig = TRUE; /* yes, we have a copy */ sigact.sa_handler = alarmfunc; #ifdef SA_RESTART /* HPUX doesn't have SA_RESTART but defaults to that behaviour! */ sigact.sa_flags &= ~SA_RESTART; #endif /* now set the new struct */ sigaction(SIGALRM, &sigact, NULL); #else /* HAVE_SIGACTION */ /* no sigaction(), revert to the much lamer signal() */ #ifdef HAVE_SIGNAL keep_sigact = signal(SIGALRM, alarmfunc); #endif #endif /* HAVE_SIGACTION */ /* alarm() makes a signal get sent when the timeout fires off, and that will abort system calls */ prev_alarm = alarm((unsigned int) (timeout ? timeout/1000L : timeout)); } #else #ifndef CURLRES_ASYNCH if(timeout) infof(conn->data, "timeout on name lookup is not supported\n"); #else (void)timeoutms; /* timeoutms not used with an async resolver */ #endif #endif /* USE_ALARM_TIMEOUT */ /* Perform the actual name resolution. This might be interrupted by an * alarm if it takes too long. */ rc = Curl_resolv(conn, hostname, port, entry); #ifdef USE_ALARM_TIMEOUT if (timeout > 0) { #ifdef HAVE_SIGACTION if(keep_copysig) { /* we got a struct as it looked before, now put that one back nice and clean */ sigaction(SIGALRM, &keep_sigact, NULL); /* put it back */ } #else #ifdef HAVE_SIGNAL /* restore the previous SIGALRM handler */ signal(SIGALRM, keep_sigact); #endif #endif /* HAVE_SIGACTION */ /* switch back the alarm() to either zero or to what it was before minus the time we spent until now! */ if(prev_alarm) { /* there was an alarm() set before us, now put it back */ unsigned long elapsed_ms = Curl_tvdiff(Curl_tvnow(), conn->created); /* the alarm period is counted in even number of seconds */ unsigned long alarm_set = prev_alarm - elapsed_ms/1000; if(!alarm_set || ((alarm_set >= 0x80000000) && (prev_alarm < 0x80000000)) ) { /* if the alarm time-left reached zero or turned "negative" (counted with unsigned values), we should fire off a SIGALRM here, but we won't, and zero would be to switch it off so we never set it to less than 1! */ alarm(1); rc = CURLRESOLV_TIMEDOUT; failf(data, "Previous alarm fired off!"); } else alarm((unsigned int)alarm_set); } else alarm(0); /* just shut it off */ } #endif /* USE_ALARM_TIMEOUT */ return rc; } /* * Curl_resolv_unlock() unlocks the given cached DNS entry. When this has been * made, the struct may be destroyed due to pruning. It is important that only * one unlock is made for each Curl_resolv() call. */ void Curl_resolv_unlock(struct SessionHandle *data, struct Curl_dns_entry *dns) { DEBUGASSERT(dns && (dns->inuse>0)); if(data->share) Curl_share_lock(data, CURL_LOCK_DATA_DNS, CURL_LOCK_ACCESS_SINGLE); dns->inuse--; if(data->share) Curl_share_unlock(data, CURL_LOCK_DATA_DNS); } /* * File-internal: free a cache dns entry. */ static void freednsentry(void *freethis) { struct Curl_dns_entry *p = (struct Curl_dns_entry *) freethis; Curl_freeaddrinfo(p->addr); free(p); } /* * Curl_mk_dnscache() creates a new DNS cache and returns the handle for it. */ struct curl_hash *Curl_mk_dnscache(void) { return Curl_hash_alloc(7, Curl_hash_str, Curl_str_key_compare, freednsentry); } #ifdef CURLRES_ADDRINFO_COPY /* align on even 64bit boundaries */ #define MEMALIGN(x) ((x)+(8-(((unsigned long)(x))&0x7))) /* * Curl_addrinfo_copy() performs a "deep" copy of a hostent into a buffer and * returns a pointer to the malloc()ed copy. You need to call free() on the * returned buffer when you're done with it. */ Curl_addrinfo *Curl_addrinfo_copy(const void *org, int port) { const struct hostent *orig = org; return Curl_he2ai(orig, port); } #endif /* CURLRES_ADDRINFO_COPY */ /*********************************************************************** * Only for plain-ipv4 and c-ares builds (NOTE: c-ares builds can be IPv6 * enabled) **********************************************************************/ #if defined(CURLRES_IPV4) || defined(CURLRES_ARES) /* * This is a function for freeing name information in a protocol independent * way. */ void Curl_freeaddrinfo(Curl_addrinfo *ai) { Curl_addrinfo *next; /* walk over the list and free all entries */ while(ai) { next = ai->ai_next; if(ai->ai_canonname) free(ai->ai_canonname); free(ai); ai = next; } } struct namebuf { struct hostent hostentry; char *h_addr_list[2]; struct in_addr addrentry; char h_name[16]; /* 123.123.123.123 = 15 letters is maximum */ }; /* * Curl_ip2addr() takes a 32bit ipv4 internet address as input parameter * together with a pointer to the string version of the address, and it * returns a Curl_addrinfo chain filled in correctly with information for this * address/host. * * The input parameters ARE NOT checked for validity but they are expected * to have been checked already when this is called. */ Curl_addrinfo *Curl_ip2addr(in_addr_t num, const char *hostname, int port) { Curl_addrinfo *ai; #if defined(VMS) && \ defined(__INITIAL_POINTER_SIZE) && (__INITIAL_POINTER_SIZE == 64) #pragma pointer_size save #pragma pointer_size short #pragma message disable PTRMISMATCH #endif struct hostent *h; struct in_addr *addrentry; struct namebuf buffer; struct namebuf *buf = &buffer; h = &buf->hostentry; h->h_addr_list = &buf->h_addr_list[0]; addrentry = &buf->addrentry; #ifdef _CRAYC /* On UNICOS, s_addr is a bit field and for some reason assigning to it * doesn't work. There must be a better fix than this ugly hack. */ memcpy(addrentry, &num, SIZEOF_in_addr); #else addrentry->s_addr = num; #endif h->h_addr_list[0] = (char*)addrentry; h->h_addr_list[1] = NULL; h->h_addrtype = AF_INET; h->h_length = sizeof(*addrentry); h->h_name = &buf->h_name[0]; h->h_aliases = NULL; /* Now store the dotted version of the address */ snprintf(h->h_name, 16, "%s", hostname); #if defined(VMS) && \ defined(__INITIAL_POINTER_SIZE) && (__INITIAL_POINTER_SIZE == 64) #pragma pointer_size restore #pragma message enable PTRMISMATCH #endif ai = Curl_he2ai(h, port); return ai; } /* * Curl_he2ai() translates from a hostent struct to a Curl_addrinfo struct. * The Curl_addrinfo is meant to work like the addrinfo struct does for IPv6 * stacks, but for all hosts and environments. * * Curl_addrinfo defined in "lib/hostip.h" * * struct Curl_addrinfo { * int ai_flags; * int ai_family; * int ai_socktype; * int ai_protocol; * socklen_t ai_addrlen; * Follow rfc3493 struct addrinfo * * char *ai_canonname; * struct sockaddr *ai_addr; * struct Curl_addrinfo *ai_next; * }; * * hostent defined in * * struct hostent { * char *h_name; * char **h_aliases; * int h_addrtype; * int h_length; * char **h_addr_list; * }; * * for backward compatibility: * * #define h_addr h_addr_list[0] */ Curl_addrinfo *Curl_he2ai(const struct hostent *he, int port) { Curl_addrinfo *ai; Curl_addrinfo *prevai = NULL; Curl_addrinfo *firstai = NULL; struct sockaddr_in *addr; #ifdef CURLRES_IPV6 struct sockaddr_in6 *addr6; #endif /* CURLRES_IPV6 */ int i; struct in_addr *curr; if(!he) /* no input == no output! */ return NULL; for(i=0; (curr = (struct in_addr *)he->h_addr_list[i]) != NULL; i++) { int ss_size; #ifdef CURLRES_IPV6 if (he->h_addrtype == AF_INET6) ss_size = sizeof (struct sockaddr_in6); else #endif /* CURLRES_IPV6 */ ss_size = sizeof (struct sockaddr_in); ai = calloc(1, sizeof(Curl_addrinfo) + ss_size); if(!ai) break; if(!firstai) /* store the pointer we want to return from this function */ firstai = ai; if(prevai) /* make the previous entry point to this */ prevai->ai_next = ai; ai->ai_family = he->h_addrtype; /* we return all names as STREAM, so when using this address for TFTP the type must be ignored and conn->socktype be used instead! */ ai->ai_socktype = SOCK_STREAM; ai->ai_addrlen = ss_size; /* make the ai_addr point to the address immediately following this struct and use that area to store the address */ ai->ai_addr = (struct sockaddr *) ((char*)ai + sizeof(Curl_addrinfo)); /* need to free this eventually */ ai->ai_canonname = strdup(he->h_name); /* leave the rest of the struct filled with zero */ switch (ai->ai_family) { case AF_INET: addr = (struct sockaddr_in *)ai->ai_addr; /* storage area for this info */ memcpy((char *)&(addr->sin_addr), curr, sizeof(struct in_addr)); addr->sin_family = (unsigned short)(he->h_addrtype); addr->sin_port = htons((unsigned short)port); break; #ifdef CURLRES_IPV6 case AF_INET6: addr6 = (struct sockaddr_in6 *)ai->ai_addr; /* storage area for this info */ memcpy((char *)&(addr6->sin6_addr), curr, sizeof(struct in6_addr)); addr6->sin6_family = (unsigned short)(he->h_addrtype); addr6->sin6_port = htons((unsigned short)port); break; #endif /* CURLRES_IPV6 */ } prevai = ai; } return firstai; } #endif /* CURLRES_IPV4 || CURLRES_ARES */