/***************************************************************************** * _ _ ____ _ * Project ___| | | | _ \| | * / __| | | | |_) | | * | (__| |_| | _ <| |___ * \___|\___/|_| \_\_____| * * Copyright (C) 2000, Daniel Stenberg, , et al. * * In order to be useful for every potential user, curl and libcurl are * dual-licensed under the MPL and the MIT/X-derivate licenses. * * You may opt to use, copy, modify, merge, publish, distribute and/or sell * copies of the Software, and permit persons to whom the Software is * furnished to do so, under the terms of the MPL or the MIT/X-derivate * licenses. You may pick one of these licenses. * * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY * KIND, either express or implied. * * $Id$ *****************************************************************************/ /* -- WIN32 approved -- */ #include "setup.h" #include #include #include #include #include #include #include #include #if defined(WIN32) && !defined(__GNUC__) || defined(__MINGW32__) #include #include #include #else #ifdef HAVE_SYS_SOCKET_H #include #endif #include #include #include #ifdef HAVE_UNISTD_H #include #endif #include #ifdef HAVE_ARPA_INET_H #include #endif #ifdef HAVE_NET_IF_H #include #endif #include #include #ifdef HAVE_SYS_PARAM_H #include #endif #ifdef HAVE_SYS_SELECT_H #include #endif #ifndef HAVE_SELECT #error "We can't compile without select() support!" #endif #ifndef HAVE_SOCKET #error "We can't compile without socket() support!" #endif #endif #include "urldata.h" #include "netrc.h" #include "formdata.h" #include "base64.h" #include "ssluse.h" #include "hostip.h" #include "if2ip.h" #include "transfer.h" #include "sendf.h" #include "getpass.h" #include "progress.h" #include "cookie.h" #include "strequal.h" #include "escape.h" /* And now for the protocols */ #include "ftp.h" #include "dict.h" #include "telnet.h" #include "http.h" #include "file.h" #include "ldap.h" #include #define _MPRINTF_REPLACE /* use our functions only */ #include #ifdef KRB4 #include "security.h" #endif /* The last #include file should be: */ #ifdef MALLOCDEBUG #include "memdebug.h" #endif /* -- -- */ CURLcode _urlget(struct UrlData *data); /* does nothing, returns OK */ CURLcode curl_init(void) { return CURLE_OK; } /* does nothing */ void curl_free(void) { } void static urlfree(struct UrlData *data, bool totally) { #ifdef USE_SSLEAY if (data->ssl.use) { if(data->ssl.handle) { (void)SSL_shutdown(data->ssl.handle); SSL_set_connect_state(data->ssl.handle); SSL_free (data->ssl.handle); data->ssl.handle = NULL; } if(data->ssl.ctx) { SSL_CTX_free (data->ssl.ctx); data->ssl.ctx = NULL; } data->ssl.use = FALSE; /* get back to ordinary socket usage */ } #endif /* USE_SSLEAY */ /* close possibly still open sockets */ if(-1 != data->secondarysocket) { sclose(data->secondarysocket); data->secondarysocket = -1; } if(-1 != data->firstsocket) { sclose(data->firstsocket); data->firstsocket=-1; } if(data->bits.proxystringalloc) { data->bits.proxystringalloc=FALSE;; free(data->proxy); data->proxy=NULL; /* Since we allocated the string the previous round, it means that we "discovered" the proxy in the environment variables and thus we must switch off that knowledge again... */ data->bits.httpproxy=FALSE; } if(data->bits.rangestringalloc) { free(data->range); data->range=NULL; data->bits.rangestringalloc=0; /* free now */ } if(data->ptr_proxyuserpwd) { free(data->ptr_proxyuserpwd); data->ptr_proxyuserpwd=NULL; } if(data->ptr_uagent) { free(data->ptr_uagent); data->ptr_uagent=NULL; } if(data->ptr_userpwd) { free(data->ptr_userpwd); data->ptr_userpwd=NULL; } if(data->ptr_rangeline) { free(data->ptr_rangeline); data->ptr_rangeline=NULL; } if(data->ptr_ref) { free(data->ptr_ref); data->ptr_ref=NULL; } if(data->ptr_cookie) { free(data->ptr_cookie); data->ptr_cookie=NULL; } if(data->ptr_host) { free(data->ptr_host); data->ptr_host=NULL; } if(totally) { /* we let the switch decide whether we're doing a part or total cleanup */ /* check for allocated [URL] memory to free: */ if(data->freethis) free(data->freethis); if(data->headerbuff) free(data->headerbuff); if(data->free_referer) free(data->referer); if(data->bits.urlstringalloc) /* the URL is allocated, free it! */ free(data->url); Curl_cookie_cleanup(data->cookies); free(data); /* global cleanup */ curl_free(); } } CURLcode curl_close(CURL *curl) { struct UrlData *data=(struct UrlData *)curl; void *protocol = data->proto.generic; /* total session cleanup (frees 'data' as well!)*/ urlfree(data, TRUE); if(protocol) free(protocol); return CURLE_OK; } static int my_getpass(void *clientp, char *prompt, char* buffer, int buflen ) { char *retbuf; retbuf = getpass_r(prompt, buffer, buflen); if(NULL == retbuf) return 1; else return 0; /* success */ } CURLcode curl_open(CURL **curl, char *url) { /* We don't yet support specifying the URL at this point */ struct UrlData *data; /* Very simple start-up: alloc the struct, init it with zeroes and return */ data = (struct UrlData *)malloc(sizeof(struct UrlData)); if(data) { memset(data, 0, sizeof(struct UrlData)); data->handle = STRUCT_OPEN; data->interf = CURLI_NORMAL; /* normal interface by default */ /* We do some initial setup here, all those fields that can't be just 0 */ data-> headerbuff=(char*)malloc(HEADERSIZE); if(!data->headerbuff) { free(data); /* free the memory again */ return CURLE_OUT_OF_MEMORY; } data-> headersize=HEADERSIZE; data->out = stdout; /* default output to stdout */ data->in = stdin; /* default input from stdin */ data->err = stderr; /* default stderr to stderr */ data->firstsocket = -1; /* no file descriptor */ data->secondarysocket = -1; /* no file descriptor */ /* use fwrite as default function to store output */ data->fwrite = (size_t (*)(char *, size_t, size_t, FILE *))fwrite; /* use fread as default function to read input */ data->fread = (size_t (*)(char *, size_t, size_t, FILE *))fread; /* set the default passwd function */ data->fpasswd = my_getpass; data->infilesize = -1; /* we don't know any size */ data->current_speed = -1; /* init to negative == impossible */ data->httpreq = HTTPREQ_GET; /* Default HTTP request */ *curl = data; return CURLE_OK; } /* this is a very serious error */ return CURLE_OUT_OF_MEMORY; } CURLcode curl_setopt(CURL *curl, CURLoption option, ...) { struct UrlData *data = curl; va_list param; char *cookiefile; va_start(param, option); switch(option) { case CURLOPT_VERBOSE: data->bits.verbose = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_HEADER: data->bits.http_include_header = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_NOPROGRESS: data->bits.hide_progress = va_arg(param, long)?TRUE:FALSE; if(data->bits.hide_progress) data->progress.flags |= PGRS_HIDE; break; case CURLOPT_NOBODY: data->bits.no_body = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_FAILONERROR: data->bits.http_fail_on_error = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_UPLOAD: data->bits.upload = va_arg(param, long)?TRUE:FALSE; if(data->bits.upload) /* If this is HTTP, PUT is what's needed to "upload" */ data->httpreq = HTTPREQ_PUT; break; case CURLOPT_POST: data->bits.http_post = va_arg(param, long)?TRUE:FALSE; if(data->bits.http_post) data->httpreq = HTTPREQ_POST; break; case CURLOPT_FILETIME: data->bits.get_filetime = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_FTPLISTONLY: data->bits.ftp_list_only = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_FTPAPPEND: data->bits.ftp_append = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_NETRC: data->bits.use_netrc = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_FOLLOWLOCATION: data->bits.http_follow_location = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_FTPASCII: data->bits.ftp_ascii = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_PUT: data->bits.http_put = va_arg(param, long)?TRUE:FALSE; if(data->bits.http_put) data->httpreq = HTTPREQ_PUT; break; case CURLOPT_MUTE: data->bits.mute = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_TIMECONDITION: data->timecondition = va_arg(param, long); break; case CURLOPT_TIMEVALUE: data->timevalue = va_arg(param, long); break; case CURLOPT_SSLVERSION: data->ssl.version = va_arg(param, long); break; case CURLOPT_COOKIEFILE: cookiefile = (char *)va_arg(param, void *); if(cookiefile) { data->cookies = Curl_cookie_init(cookiefile); } break; case CURLOPT_WRITEHEADER: data->writeheader = (FILE *)va_arg(param, FILE *); break; case CURLOPT_COOKIE: data->cookie = va_arg(param, char *); break; case CURLOPT_ERRORBUFFER: data->errorbuffer = va_arg(param, char *); break; case CURLOPT_FILE: data->out = va_arg(param, FILE *); break; case CURLOPT_FTPPORT: data->ftpport = va_arg(param, char *); data->bits.ftp_use_port = data->ftpport?1:0; break; case CURLOPT_HTTPHEADER: data->headers = va_arg(param, struct curl_slist *); break; case CURLOPT_CUSTOMREQUEST: data->customrequest = va_arg(param, char *); if(data->customrequest) data->httpreq = HTTPREQ_CUSTOM; break; case CURLOPT_HTTPPOST: data->httppost = va_arg(param, struct HttpPost *); data->bits.http_formpost = data->httppost?1:0; if(data->bits.http_formpost) data->httpreq = HTTPREQ_POST_FORM; break; case CURLOPT_INFILE: data->in = va_arg(param, FILE *); break; case CURLOPT_INFILESIZE: data->infilesize = va_arg(param, long); break; case CURLOPT_LOW_SPEED_LIMIT: data->low_speed_limit=va_arg(param, long); break; case CURLOPT_LOW_SPEED_TIME: data->low_speed_time=va_arg(param, long); break; case CURLOPT_URL: data->url = va_arg(param, char *); break; case CURLOPT_PORT: data->port = va_arg(param, long); break; case CURLOPT_POSTFIELDS: data->postfields = va_arg(param, char *); break; case CURLOPT_POSTFIELDSIZE: data->postfieldsize = va_arg(param, long); break; case CURLOPT_REFERER: data->referer = va_arg(param, char *); data->bits.http_set_referer = (data->referer && *data->referer)?1:0; break; case CURLOPT_AUTOREFERER: data->bits.http_auto_referer = va_arg(param, long)?1:0; break; case CURLOPT_PROXY: data->proxy = va_arg(param, char *); data->bits.httpproxy = data->proxy?1:0; break; case CURLOPT_HTTPPROXYTUNNEL: data->bits.tunnel_thru_httpproxy = va_arg(param, long)?TRUE:FALSE; break; case CURLOPT_PROXYPORT: data->proxyport = va_arg(param, long); break; case CURLOPT_TIMEOUT: data->timeout = va_arg(param, long); break; case CURLOPT_MAXREDIRS: data->maxredirs = va_arg(param, long); break; case CURLOPT_USERAGENT: data->useragent = va_arg(param, char *); break; case CURLOPT_USERPWD: data->userpwd = va_arg(param, char *); data->bits.user_passwd = data->userpwd?1:0; break; case CURLOPT_POSTQUOTE: data->postquote = va_arg(param, struct curl_slist *); break; case CURLOPT_PROGRESSFUNCTION: data->fprogress = va_arg(param, curl_progress_callback); data->progress.callback = TRUE; /* no longer internal */ break; case CURLOPT_PROGRESSDATA: data->progress_client = va_arg(param, void *); break; case CURLOPT_PASSWDFUNCTION: data->fpasswd = va_arg(param, curl_passwd_callback); break; case CURLOPT_PASSWDDATA: data->passwd_client = va_arg(param, void *); break; case CURLOPT_PROXYUSERPWD: data->proxyuserpwd = va_arg(param, char *); data->bits.proxy_user_passwd = data->proxyuserpwd?1:0; break; case CURLOPT_RANGE: data->range = va_arg(param, char *); data->bits.set_range = data->range?1:0; break; case CURLOPT_RESUME_FROM: data->resume_from = va_arg(param, long); break; case CURLOPT_STDERR: data->err = va_arg(param, FILE *); break; case CURLOPT_WRITEFUNCTION: data->fwrite = va_arg(param, curl_write_callback); break; case CURLOPT_READFUNCTION: data->fread = va_arg(param, curl_read_callback); break; case CURLOPT_SSLCERT: data->cert = va_arg(param, char *); break; case CURLOPT_SSLCERTPASSWD: data->cert_passwd = va_arg(param, char *); break; case CURLOPT_CRLF: data->crlf = va_arg(param, long); break; case CURLOPT_QUOTE: data->quote = va_arg(param, struct curl_slist *); break; case CURLOPT_INTERFACE: data->device = va_arg(param, char *); break; case CURLOPT_KRB4LEVEL: data->krb4_level = va_arg(param, char *); data->bits.krb4=data->krb4_level?TRUE:FALSE; break; case CURLOPT_SSL_VERIFYPEER: data->ssl.verifypeer = va_arg(param, long); break; case CURLOPT_CAINFO: data->ssl.CAfile = va_arg(param, char *); data->ssl.CApath = NULL; /*This does not work on windows.*/ break; default: /* unknown tag and its companion, just ignore: */ return CURLE_READ_ERROR; /* correct this */ } return CURLE_OK; } #if !defined(WIN32)||defined(__CYGWIN32__) #ifndef RETSIGTYPE #define RETSIGTYPE void #endif static RETSIGTYPE alarmfunc(int signal) { /* this is for "-ansi -Wall -pedantic" to stop complaining! (rabe) */ (void)signal; return; } #endif CURLcode curl_disconnect(CURLconnect *c_connect) { struct connectdata *conn = c_connect; struct UrlData *data = conn->data; #ifdef ENABLE_IPV6 if(conn->res) /* host name info */ freeaddrinfo(conn->res); #else if(conn->hostent_buf) /* host name info */ free(conn->hostent_buf); #endif if(conn->path) /* the URL path part */ free(conn->path); free(conn); /* free the connection oriented data */ /* clean up the sockets and SSL stuff from the previous "round" */ urlfree(data, FALSE); return CURLE_OK; } static CURLcode _connect(CURL *curl, CURLconnect **in_connect) { char *tmp; char *buf; CURLcode result; char resumerange[40]=""; struct UrlData *data = curl; struct connectdata *conn; char endbracket; #ifdef HAVE_SIGACTION struct sigaction sigact; #endif int urllen; #ifdef ENABLE_IPV6 struct addrinfo *ai; #endif /************************************************************* * Check input data *************************************************************/ if(!data || (data->handle != STRUCT_OPEN)) return CURLE_BAD_FUNCTION_ARGUMENT; /* TBD: make error codes */ if(!data->url) return CURLE_URL_MALFORMAT; /************************************************************* * Allocate and initiate a connection struct *************************************************************/ conn = (struct connectdata *)malloc(sizeof(struct connectdata)); if(!conn) { *in_connect = NULL; /* clear the pointer */ return CURLE_OUT_OF_MEMORY; } *in_connect = conn; memset(conn, 0, sizeof(struct connectdata)); conn->handle = STRUCT_CONNECT; conn->data = data; /* remember our daddy */ conn->state = CONN_INIT; conn->upload_bufsize = UPLOAD_BUFSIZE; /* the smallest upload buffer size we use */ buf = data->buffer; /* this is our buffer */ /************************************************************* * Set signal handler *************************************************************/ #ifdef HAVE_SIGACTION sigaction(SIGALRM, NULL, &sigact); sigact.sa_handler = alarmfunc; #ifdef SA_RESTART /* HPUX doesn't have SA_RESTART but defaults to that behaviour! */ sigact.sa_flags &= ~SA_RESTART; #endif sigaction(SIGALRM, &sigact, NULL); #else /* no sigaction(), revert to the much lamer signal() */ #ifdef HAVE_SIGNAL signal(SIGALRM, alarmfunc); #endif #endif /*********************************************************** * We need to allocate memory to store the path in. We get the size of the * full URL to be sure, and we need to make it at least 256 bytes since * other parts of the code will rely on this fact ***********************************************************/ #define LEAST_PATH_ALLOC 256 urllen=strlen(data->url); if(urllen < LEAST_PATH_ALLOC) urllen=LEAST_PATH_ALLOC; conn->path=(char *)malloc(urllen); if(NULL == conn->path) return CURLE_OUT_OF_MEMORY; /* really bad error */ /************************************************************* * Parse the URL. * * We need to parse the url even when using the proxy, because we will need * the hostname and port in case we are trying to SSL connect through the * proxy -- and we don't know if we will need to use SSL until we parse the * url ... ************************************************************/ if((2 == sscanf(data->url, "%64[^:]://%[^\n]", conn->proto, conn->path)) && strequal(conn->proto, "file")) { /* * we deal with file:/// differently since it supports no * hostname other than "localhost" and "127.0.0.1", which is unique among * the URL protocols specified in RFC 1738 */ if (strnequal(conn->path, "localhost/", 10) || strnequal(conn->path, "127.0.0.1/", 10)) /* If there's another host name than the one we support, / is * quietly ommitted */ strcpy(conn->path, &conn->path[10]); strcpy(conn->proto, "file"); /* store protocol string lowercase */ } else { /* Set default host and default path */ strcpy(conn->gname, "curl.haxx.se"); strcpy(conn->path, "/"); if (2 > sscanf(data->url, "%64[^\n:]://%256[^\n/]%[^\n]", conn->proto, conn->gname, conn->path)) { /* * The URL was badly formatted, let's try the browser-style _without_ * protocol specified like 'http://'. */ if((1 > sscanf(data->url, "%256[^\n/]%[^\n]", conn->gname, conn->path)) ) { /* * We couldn't even get this format. */ failf(data, " malformed"); return CURLE_URL_MALFORMAT; } /* * Since there was no protocol part specified, we guess what protocol it * is based on the first letters of the server name. */ if(strnequal(conn->gname, "FTP", 3)) { strcpy(conn->proto, "ftp"); } else if(strnequal(conn->gname, "GOPHER", 6)) strcpy(conn->proto, "gopher"); #ifdef USE_SSLEAY else if(strnequal(conn->gname, "HTTPS", 5)) strcpy(conn->proto, "https"); #endif /* USE_SSLEAY */ else if(strnequal(conn->gname, "TELNET", 6)) strcpy(conn->proto, "telnet"); else if (strnequal(conn->gname, "DICT", sizeof("DICT")-1)) strcpy(conn->proto, "DICT"); else if (strnequal(conn->gname, "LDAP", sizeof("LDAP")-1)) strcpy(conn->proto, "LDAP"); else { strcpy(conn->proto, "http"); } conn->protocol |= PROT_MISSING; /* not given in URL */ } } /************************************************************* * Take care of user and password authentication stuff *************************************************************/ if(data->bits.user_passwd && !data->bits.use_netrc) { data->user[0] =0; data->passwd[0]=0; if(*data->userpwd != ':') { /* the name is given, get user+password */ sscanf(data->userpwd, "%127[^:]:%127[^\n]", data->user, data->passwd); } else /* no name given, get the password only */ sscanf(data->userpwd+1, "%127[^\n]", data->passwd); /* check for password, if no ask for one */ if( !data->passwd[0] ) { if(!data->fpasswd || data->fpasswd(data->passwd_client, "password:", data->passwd, sizeof(data->passwd))) return CURLE_BAD_PASSWORD_ENTERED; } } /************************************************************* * Take care of proxy authentication stuff *************************************************************/ if(data->bits.proxy_user_passwd) { data->proxyuser[0] =0; data->proxypasswd[0]=0; if(*data->proxyuserpwd != ':') { /* the name is given, get user+password */ sscanf(data->proxyuserpwd, "%127[^:]:%127[^\n]", data->proxyuser, data->proxypasswd); } else /* no name given, get the password only */ sscanf(data->proxyuserpwd+1, "%127[^\n]", data->proxypasswd); /* check for password, if no ask for one */ if( !data->proxypasswd[0] ) { if(!data->fpasswd || data->fpasswd( data->passwd_client, "proxy password:", data->proxypasswd, sizeof(data->proxypasswd))) return CURLE_BAD_PASSWORD_ENTERED; } } /************************************************************* * Set a few convenience pointers *************************************************************/ conn->name = conn->gname; conn->ppath = conn->path; data->hostname = conn->name; /************************************************************* * Detect what (if any) proxy to use *************************************************************/ if(!data->bits.httpproxy) { /* If proxy was not specified, we check for default proxy environment * variables, to enable i.e Lynx compliance: * * http_proxy=http://some.server.dom:port/ * https_proxy=http://some.server.dom:port/ * ftp_proxy=http://some.server.dom:port/ * gopher_proxy=http://some.server.dom:port/ * no_proxy=domain1.dom,host.domain2.dom * (a comma-separated list of hosts which should * not be proxied, or an asterisk to override * all proxy variables) * all_proxy=http://some.server.dom:port/ * (seems to exist for the CERN www lib. Probably * the first to check for.) * * For compatibility, the all-uppercase versions of these variables are * checked if the lowercase versions don't exist. */ char *no_proxy=NULL; char *proxy=NULL; char proxy_env[128]; no_proxy=curl_getenv("no_proxy"); if(!no_proxy) no_proxy=curl_getenv("NO_PROXY"); if(!no_proxy || !strequal("*", no_proxy)) { /* NO_PROXY wasn't specified or it wasn't just an asterisk */ char *nope; nope=no_proxy?strtok(no_proxy, ", "):NULL; while(nope) { if(strlen(nope) <= strlen(conn->name)) { char *checkn= conn->name + strlen(conn->name) - strlen(nope); if(strnequal(nope, checkn, strlen(nope))) { /* no proxy for this host! */ break; } } nope=strtok(NULL, ", "); } if(!nope) { /* It was not listed as without proxy */ char *protop = conn->proto; char *envp = proxy_env; char *prox; /* Now, build _proxy and check for such a one to use */ while(*protop) *envp++ = tolower(*protop++); /* append _proxy */ strcpy(envp, "_proxy"); /* read the protocol proxy: */ prox=curl_getenv(proxy_env); if(!prox) { /* There was no lowercase variable, try the uppercase version: */ for(envp = proxy_env; *envp; envp++) *envp = toupper(*envp); prox=curl_getenv(proxy_env); } if(prox && *prox) { /* don't count "" strings */ proxy = prox; /* use this */ } else { proxy = curl_getenv("all_proxy"); /* default proxy to use */ if(!proxy) proxy=curl_getenv("ALL_PROXY"); } if(proxy && *proxy) { /* we have a proxy here to set */ data->proxy = proxy; data->bits.proxystringalloc=1; /* this needs to be freed later */ data->bits.httpproxy=1; } } /* if (!nope) - it wasn't specified non-proxy */ } /* NO_PROXY wasn't specified or '*' */ if(no_proxy) free(no_proxy); } /* if not using proxy */ /************************************************************* * No protocol but proxy usage needs attention *************************************************************/ if((conn->protocol&PROT_MISSING) && data->bits.httpproxy ) { /* We're guessing prefixes here and since we're told to use a proxy, we need to add the protocol prefix to the URL string before we continue! */ char *reurl; reurl = aprintf("%s://%s", conn->proto, data->url); if(!reurl) return CURLE_OUT_OF_MEMORY; data->url = reurl; if(data->freethis) free(data->freethis); data->freethis = reurl; conn->protocol &= ~PROT_MISSING; /* switch that one off again */ } /************************************************************ * RESUME on a HTTP page is a tricky business. First, let's just check that * 'range' isn't used, then set the range parameter and leave the resume as * it is to inform about this situation for later use. We will then * "attempt" to resume, and if we're talking to a HTTP/1.1 (or later) * server, we will get the document resumed. If we talk to a HTTP/1.0 * server, we just fail since we can't rewind the file writing from within * this function. ***********************************************************/ if(data->resume_from) { if(!data->bits.set_range) { /* if it already was in use, we just skip this */ snprintf(resumerange, sizeof(resumerange), "%d-", data->resume_from); data->range=strdup(resumerange); /* tell ourselves to fetch this range */ data->bits.rangestringalloc = TRUE; /* mark as allocated */ data->bits.set_range = 1; /* switch on range usage */ } } /************************************************************* * Set timeout if that is being used *************************************************************/ if(data->timeout) { /* We set the timeout on the connection/resolving phase first, separately * from the download/upload part to allow a maximum time on everything */ myalarm(data->timeout); /* this sends a signal when the timeout fires off, and that will abort system calls */ } /************************************************************* * Setup internals depending on protocol *************************************************************/ if (strequal(conn->proto, "HTTP")) { if(!data->port) data->port = PORT_HTTP; data->remote_port = PORT_HTTP; conn->protocol |= PROT_HTTP; conn->curl_do = Curl_http; conn->curl_done = Curl_http_done; conn->curl_close = Curl_http_close; } else if (strequal(conn->proto, "HTTPS")) { #ifdef USE_SSLEAY if(!data->port) data->port = PORT_HTTPS; data->remote_port = PORT_HTTPS; conn->protocol |= PROT_HTTP; conn->protocol |= PROT_HTTPS; conn->curl_do = Curl_http; conn->curl_done = Curl_http_done; conn->curl_connect = Curl_http_connect; conn->curl_close = Curl_http_close; #else /* USE_SSLEAY */ failf(data, "libcurl was built with SSL disabled, https: not supported!"); return CURLE_UNSUPPORTED_PROTOCOL; #endif /* !USE_SSLEAY */ } else if (strequal(conn->proto, "GOPHER")) { if(!data->port) data->port = PORT_GOPHER; data->remote_port = PORT_GOPHER; /* Skip // in path if present */ if (isdigit((int)conn->path[1])) { conn->ppath = strchr(&conn->path[1], '/'); if (conn->ppath == NULL) conn->ppath = conn->path; } conn->protocol |= PROT_GOPHER; conn->curl_do = Curl_http; conn->curl_done = Curl_http_done; conn->curl_close = Curl_http_close; } else if(strequal(conn->proto, "FTP")) { char *type; if(!data->port) data->port = PORT_FTP; data->remote_port = PORT_FTP; conn->protocol |= PROT_FTP; if(data->bits.httpproxy && !data->bits.tunnel_thru_httpproxy) { /* Unless we have asked to tunnel ftp operations through the proxy, we switch and use HTTP operations only */ conn->curl_do = Curl_http; conn->curl_done = Curl_http_done; conn->curl_close = Curl_http_close; } else { conn->curl_do = Curl_ftp; conn->curl_done = Curl_ftp_done; conn->curl_connect = Curl_ftp_connect; } conn->ppath++; /* don't include the initial slash */ /* FTP URLs support an extension like ";type=" that * we'll try to get now! */ type=strstr(conn->ppath, ";type="); if(!type) { type=strstr(conn->gname, ";type="); } if(type) { char command; *type=0; command = toupper(type[6]); switch(command) { case 'A': /* ASCII mode */ data->bits.ftp_ascii = 1; break; case 'D': /* directory mode */ data->bits.ftp_list_only = 1; break; case 'I': /* binary mode */ default: /* switch off ASCII */ data->bits.ftp_ascii = 0; break; } } } else if(strequal(conn->proto, "TELNET")) { /* telnet testing factory */ conn->protocol |= PROT_TELNET; if(!data->port) data->port = PORT_TELNET; data->remote_port = PORT_TELNET; conn->curl_do = Curl_telnet; conn->curl_done = Curl_telnet_done; } else if (strequal(conn->proto, "DICT")) { conn->protocol |= PROT_DICT; if(!data->port) data->port = PORT_DICT; data->remote_port = PORT_DICT; conn->curl_do = Curl_dict; conn->curl_done = Curl_dict_done; } else if (strequal(conn->proto, "LDAP")) { conn->protocol |= PROT_LDAP; if(!data->port) data->port = PORT_LDAP; data->remote_port = PORT_LDAP; conn->curl_do = Curl_ldap; conn->curl_done = Curl_ldap_done; } else if (strequal(conn->proto, "FILE")) { conn->protocol |= PROT_FILE; conn->curl_do = file; /* no done() function */ result = Curl_Transfer(conn, -1, -1, FALSE, NULL, /* no download */ -1, NULL); /* no upload */ return CURLE_OK; } else { /* We fell through all checks and thus we don't support the specified protocol */ failf(data, "Unsupported protocol: %s", conn->proto); return CURLE_UNSUPPORTED_PROTOCOL; } /************************************************************* * .netrc scanning coming up *************************************************************/ if(data->bits.use_netrc) { if(Curl_parsenetrc(data->hostname, data->user, data->passwd)) { infof(data, "Couldn't find host %s in the .netrc file, using defaults", data->hostname); } /* weather we failed or not, we don't know which fields that were filled in anyway */ if(!data->user[0]) strcpy(data->user, CURL_DEFAULT_USER); if(!data->passwd[0]) strcpy(data->passwd, CURL_DEFAULT_PASSWORD); if(conn->protocol&PROT_HTTP) { data->bits.user_passwd = 1; /* enable user+password */ } } else if(!(data->bits.user_passwd) && (conn->protocol & (PROT_FTP|PROT_HTTP)) ) { /* This is a FTP or HTTP URL, and we haven't got the user+password in * the extra parameter, we will now try to extract the possible * user+password pair in a string like: * ftp://user:password@ftp.my.site:8021/README */ char *ptr=NULL; /* assign to remove possible warnings */ if((ptr=strchr(conn->name, '@'))) { /* there's a user+password given here, to the left of the @ */ data->user[0] =0; data->passwd[0]=0; if(*conn->name != ':') { /* the name is given, get user+password */ sscanf(conn->name, "%127[^:@]:%127[^@]", data->user, data->passwd); } else /* no name given, get the password only */ sscanf(conn->name+1, "%127[^@]", data->passwd); if(data->user[0]) { char *newname=curl_unescape(data->user, 0); if(strlen(newname) < sizeof(data->user)) { strcpy(data->user, newname); } /* if the new name is longer than accepted, then just use the unconverted name, it'll be wrong but what the heck */ free(newname); } /* check for password, if no ask for one */ if( !data->passwd[0] ) { if(!data->fpasswd || data->fpasswd(data->passwd_client, "password:",data->passwd,sizeof(data->passwd))) return CURLE_BAD_PASSWORD_ENTERED; } else { /* we have a password found in the URL, decode it! */ char *newpasswd=curl_unescape(data->passwd, 0); if(strlen(newpasswd) < sizeof(data->passwd)) { strcpy(data->passwd, newpasswd); } free(newpasswd); } conn->name = ++ptr; data->bits.user_passwd=1; /* enable user+password */ } else { strcpy(data->user, CURL_DEFAULT_USER); strcpy(data->passwd, CURL_DEFAULT_PASSWORD); } } /************************************************************* * Figure out the remote port number * * No matter if we use a proxy or not, we have to figure out the remote * port number of various reasons. * * To be able to detect port number flawlessly, we must not confuse them * IPv6-specified addresses in the [0::1] style. *************************************************************/ if((1 == sscanf(conn->name, "[%*39[0-9a-fA-F:]%c", &endbracket)) && (']' == endbracket)) { /* this is a IPv6-style specified IP-address */ #ifndef ENABLE_IPV6 failf(data, "You haven't enabled IPv6 support"); return CURLE_URL_MALFORMAT; #else tmp = strchr(conn->name, ']'); tmp++; /* pass the ending bracket */ if(':' != *tmp) tmp = NULL; /* no port number available */ #endif } else { /* traditional IPv4-style port-extracting */ tmp = strchr(conn->name, ':'); } if (tmp) { *tmp++ = '\0'; /* cut off the name there */ data->remote_port = atoi(tmp); } /************************************************************* * Resolve the name of the server or proxy *************************************************************/ if(!data->bits.httpproxy) { /* If not connecting via a proxy, extract the port from the URL, if it is * there, thus overriding any defaults that might have been set above. */ data->port = data->remote_port; /* it is the same port */ /* Connect to target host right on */ #ifdef ENABLE_IPV6 conn->res = Curl_getaddrinfo(data, conn->name, data->port); if(!conn->res) #else conn->hp = Curl_gethost(data, conn->name, &conn->hostent_buf); if(!conn->hp) #endif { failf(data, "Couldn't resolve host '%s'", conn->name); return CURLE_COULDNT_RESOLVE_HOST; } } else { #ifdef ENABLE_IPV6 failf(data, "proxy yet to be supported"); return CURLE_OUT_OF_MEMORY; #else char *prox_portno; char *endofprot; /* We need to make a duplicate of the proxy so that we can modify the string safely. */ char *proxydup=strdup(data->proxy); /* We use 'proxyptr' to point to the proxy name from now on... */ char *proxyptr=proxydup; if(NULL == proxydup) { failf(data, "memory shortage"); return CURLE_OUT_OF_MEMORY; } /* Daniel Dec 10, 1998: We do the proxy host string parsing here. We want the host name and the port name. Accept a protocol:// prefix, even though it should just be ignored. */ /* 1. skip the protocol part if present */ endofprot=strstr(proxyptr, "://"); if(endofprot) { proxyptr = endofprot+3; } /* allow user to specify proxy.server.com:1080 if desired */ prox_portno = strchr (proxyptr, ':'); if (prox_portno) { *prox_portno = 0x0; /* cut off number from host name */ prox_portno ++; /* now set the local port number */ data->port = atoi(prox_portno); } else if(data->proxyport) { /* None given in the proxy string, then get the default one if it is given */ data->port = data->proxyport; } /* connect to proxy */ conn->hp = Curl_gethost(data, proxyptr, &conn->hostent_buf); if(!conn->hp) { failf(data, "Couldn't resolve proxy '%s'", proxyptr); return CURLE_COULDNT_RESOLVE_PROXY; } free(proxydup); /* free the duplicate pointer and not the modified */ #endif } Curl_pgrsTime(data, TIMER_NAMELOOKUP); #ifndef ENABLE_IPV6 data->firstsocket = socket(AF_INET, SOCK_STREAM, 0); memset((char *) &conn->serv_addr, '\0', sizeof(conn->serv_addr)); memcpy((char *)&(conn->serv_addr.sin_addr), conn->hp->h_addr, conn->hp->h_length); conn->serv_addr.sin_family = conn->hp->h_addrtype; conn->serv_addr.sin_port = htons(data->port); #endif #if !defined(WIN32)||defined(__CYGWIN32__) /* We don't generally like checking for OS-versions, we should make this HAVE_XXXX based, although at the moment I don't have a decent test for this! */ #ifdef HAVE_INET_NTOA #ifndef INADDR_NONE #define INADDR_NONE (unsigned long) ~0 #endif #ifndef ENABLE_IPV6 /************************************************************* * Select device to bind socket to *************************************************************/ if (data->device && (strlen(data->device)<255)) { struct sockaddr_in sa; struct hostent *h=NULL; char *hostdataptr=NULL; size_t size; char myhost[256] = ""; unsigned long in; if(Curl_if2ip(data->device, myhost, sizeof(myhost))) { h = Curl_gethost(data, myhost, &hostdataptr); } else { if(strlen(data->device)>1) { h = Curl_gethost(data, data->device, &hostdataptr); } if(h) { /* we know data->device is shorter than the myhost array */ strcpy(myhost, data->device); } } if(! *myhost) { /* need to fix this h=Curl_gethost(data, getmyhost(*myhost,sizeof(myhost)), hostent_buf, sizeof(hostent_buf)); */ printf("in here\n"); } infof(data, "We connect from %s\n", myhost); if ( (in=inet_addr(myhost)) != INADDR_NONE ) { if ( h ) { memset((char *)&sa, 0, sizeof(sa)); memcpy((char *)&sa.sin_addr, h->h_addr, h->h_length); sa.sin_family = AF_INET; sa.sin_addr.s_addr = in; sa.sin_port = 0; /* get any port */ if( bind(data->firstsocket, (struct sockaddr *)&sa, sizeof(sa)) >= 0) { /* we succeeded to bind */ struct sockaddr_in add; size = sizeof(add); if(getsockname(data->firstsocket, (struct sockaddr *) &add, (int *)&size)<0) { failf(data, "getsockname() failed"); return CURLE_HTTP_PORT_FAILED; } } else { switch(errno) { case EBADF: failf(data, "Invalid descriptor: %d", errno); break; case EINVAL: failf(data, "Invalid request: %d", errno); break; case EACCES: failf(data, "Address is protected, user not superuser: %d", errno); break; case ENOTSOCK: failf(data, "Argument is a descriptor for a file, not a socket: %d", errno); break; case EFAULT: failf(data, "Inaccessable memory error: %d", errno); break; case ENAMETOOLONG: failf(data, "Address too long: %d", errno); break; case ENOMEM: failf(data, "Insufficient kernel memory was available: %d", errno); break; default: failf(data,"errno %d\n"); } /* end of switch */ return CURLE_HTTP_PORT_FAILED; } /* end of else */ } /* end of if h */ else { failf(data,"could't find my own IP address (%s)", myhost); return CURLE_HTTP_PORT_FAILED; } } /* end of inet_addr */ else { failf(data, "could't find my own IP address (%s)", myhost); return CURLE_HTTP_PORT_FAILED; } if(hostdataptr) free(hostdataptr); /* allocated by Curl_gethost() */ } /* end of device selection support */ #endif /* end of HAVE_INET_NTOA */ #endif /* end of not WIN32 */ #endif /*ENABLE_IPV6*/ /************************************************************* * Connect to server/proxy *************************************************************/ #ifdef ENABLE_IPV6 data->firstsocket = -1; for (ai = conn->res; ai; ai = ai->ai_next) { data->firstsocket = socket(ai->ai_family, ai->ai_socktype, ai->ai_protocol); if (data->firstsocket < 0) continue; if (connect(data->firstsocket, ai->ai_addr, ai->ai_addrlen) < 0) { close(data->firstsocket); data->firstsocket = -1; continue; } break; } if (data->firstsocket < 0) { failf(data, strerror(errno)); return CURLE_COULDNT_CONNECT; } #else if (connect(data->firstsocket, (struct sockaddr *) &(conn->serv_addr), sizeof(conn->serv_addr) ) < 0) { switch(errno) { #ifdef ECONNREFUSED /* this should be made nicer */ case ECONNREFUSED: failf(data, "Connection refused"); break; case EFAULT: failf(data, "Invalid socket address: %d",errno); break; case EISCONN: failf(data, "Socket already connected: %d",errno); break; case ETIMEDOUT: failf(data, "Timeout while accepting connection, server busy: %d",errno); break; case ENETUNREACH: failf(data, "Network is unreachable: %d",errno); break; case EADDRINUSE: failf(data, "Local address already in use: %d",errno); break; case EINPROGRESS: failf(data, "Socket is nonblocking and connection can not be completed immediately: %d",errno); break; case EALREADY: failf(data, "Socket is nonblocking and a previous connection attempt not completed: %d",errno); break; case EAGAIN: failf(data, "No more free local ports: %d",errno); break; case EACCES: case EPERM: failf(data, "Attempt to connect to broadcast address without socket broadcast flag or local firewall rule violated: %d",errno); break; #endif case EINTR: failf(data, "Connection timeouted"); break; default: failf(data, "Can't connect to server: %d", errno); break; } return CURLE_COULDNT_CONNECT; } #endif /************************************************************* * Proxy authentication *************************************************************/ if(data->bits.proxy_user_passwd) { char *authorization; snprintf(data->buffer, BUFSIZE, "%s:%s", data->proxyuser, data->proxypasswd); if(Curl_base64_encode(data->buffer, strlen(data->buffer), &authorization) >= 0) { data->ptr_proxyuserpwd = aprintf("Proxy-authorization: Basic %s\015\012", authorization); free(authorization); } } /************************************************************* * Send user-agent to HTTP proxies even if the target protocol * isn't HTTP. *************************************************************/ if((conn->protocol&PROT_HTTP) || data->bits.httpproxy) { if(data->useragent) { data->ptr_uagent = aprintf("User-Agent: %s\015\012", data->useragent); } } if(conn->curl_connect) { /* is there a connect() procedure? */ /* set start time here for timeout purposes in the * connect procedure, it is later set again for the * progress meter purpose */ conn->now = Curl_tvnow(); /* Call the protocol-specific connect function */ result = conn->curl_connect(conn); if(result != CURLE_OK) return result; /* pass back errors */ } Curl_pgrsTime(data, TIMER_CONNECT); /* we're connected */ conn->now = Curl_tvnow(); /* time this *after* the connect is done */ conn->bytecount = 0; /* Figure out the ip-number and display the first host name it shows: */ #ifdef ENABLE_IPV6 { char hbuf[NI_MAXHOST]; #ifdef NI_WITHSCOPEID const int niflags = NI_NUMERICHOST | NI_WITHSCOPEID; #else const int niflags = NI_NUMERICHOST; #endif if (getnameinfo(ai->ai_addr, ai->ai_addrlen, hbuf, sizeof(hbuf), NULL, 0, niflags)) { snprintf(hbuf, sizeof(hbuf), "?"); } if (ai->ai_canonname) { infof(data, "Connected to %s (%s)\n", ai->ai_canonname, hbuf); } else { infof(data, "Connected to %s\n", hbuf); } } #else { struct in_addr in; (void) memcpy(&in.s_addr, *conn->hp->h_addr_list, sizeof (in.s_addr)); infof(data, "Connected to %s (%s)\n", conn->hp->h_name, inet_ntoa(in)); } #endif #ifdef __EMX__ /* 20000330 mgs * the check is quite a hack... * we're calling _fsetmode to fix the problem with fwrite converting newline * characters (you get mangled text files, and corrupted binary files when * you download to stdout and redirect it to a file). */ if ((data->out)->_handle == NULL) { _fsetmode(stdout, "b"); } #endif return CURLE_OK; } CURLcode curl_connect(CURL *curl, CURLconnect **in_connect) { CURLcode code; struct connectdata *conn; /* call the stuff that needs to be called */ code = _connect(curl, in_connect); if(CURLE_OK != code) { /* We're not allowed to return failure with memory left allocated in the connectdata struct, free those here */ conn = (struct connectdata *)*in_connect; if(conn) { if(conn->path) free(conn->path); #ifdef ENABLE_IPV6 if(conn->res) freeaddrinfo(conn->res); #else if(conn->hostent_buf) free(conn->hostent_buf); #endif free(conn); *in_connect=NULL; } } return code; } /* * NAME curl_connect() * * DESCRIPTION * * Connects to the peer server and performs the initial setup. This function * writes a connect handle to its second argument that is a unique handle for * this connect. This allows multiple connects from the same handle returned * by curl_open(). * * EXAMPLE * * CURLCode result; * CURL curl; * CURLconnect connect; * result = curl_connect(curl, &connect); */ CURLcode curl_done(CURLconnect *c_connect) { struct connectdata *conn = c_connect; struct UrlData *data; CURLcode result; if(!conn || (conn->handle!= STRUCT_CONNECT)) { return CURLE_BAD_FUNCTION_ARGUMENT; } if(conn->state != CONN_DO) { /* This can only be called after a curl_do() */ return CURLE_BAD_CALLING_ORDER; } data = conn->data; /* this calls the protocol-specific function pointer previously set */ if(conn->curl_done) result = conn->curl_done(conn); else result = CURLE_OK; Curl_pgrsDone(data); /* done with the operation */ conn->state = CONN_DONE; return result; } CURLcode curl_do(CURLconnect *in_conn) { struct connectdata *conn = in_conn; CURLcode result; if(!conn || (conn->handle!= STRUCT_CONNECT)) { return CURLE_BAD_FUNCTION_ARGUMENT; } if(conn->state != CONN_INIT) { return CURLE_BAD_CALLING_ORDER; } if(conn->curl_do) { /* generic protocol-specific function pointer set in curl_connect() */ result = conn->curl_do(conn); if(result) { conn->state = CONN_ERROR; return result; } } conn->state = CONN_DO; /* we have entered this state */ return CURLE_OK; }