#!/usr/bin/env perl #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) 1998 - 2006, Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at http://curl.haxx.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # $Id$ ########################################################################### # This is the FTP server designed for the curl test suite. # # It is meant to exercise curl, it is not meant to be a fully working # or even very standard compliant server. # # You may optionally specify port on the command line, otherwise it'll # default to port 8921. # # All socket/network/TCP related stuff is done by the 'sockfilt' program. # use strict; use IPC::Open2; #use Time::HiRes qw( gettimeofday ); # not available in perl 5.6 require "getpart.pm"; require "ftp.pm"; my $ftpdnum=""; # open and close each time to allow removal at any time sub logmsg { # if later than perl 5.6 is used # my ($seconds, $microseconds) = gettimeofday; my $seconds = time(); my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) = localtime($seconds); open(FTPLOG, ">>log/ftpd$ftpdnum.log"); printf FTPLOG ("%02d:%02d:%02d ", $hour, $min, $sec); print FTPLOG @_; close(FTPLOG); } sub ftpmsg { # append to the server.input file open(INPUT, ">>log/server$ftpdnum.input") || logmsg "failed to open log/server$ftpdnum.input\n"; print INPUT @_; close(INPUT); # use this, open->print->close system only to make the file # open as little as possible, to make the test suite run # better on windows/cygwin } my $verbose=0; # set to 1 for debugging my $pasvbadip=0; my $retrweirdo=0; my $retrnosize=0; my $srcdir="."; my $nosave=0; my $controldelay=0; # set to 1 to delay the control connect data sending to # test that curl deals with that nicely my $slavepid; # for the DATA connection sockfilt slave process my $ipv6; my $ext; # append to log/pid file names my $grok_eprt; my $port = 8921; # just a default my $pidfile = ".ftpd.pid"; # a default, use --pidfile do { if($ARGV[0] eq "-v") { $verbose=1; } elsif($ARGV[0] eq "-s") { $srcdir=$ARGV[1]; shift @ARGV; } elsif($ARGV[0] eq "--id") { $ftpdnum=$ARGV[1]; shift @ARGV; } elsif($ARGV[0] eq "--pidfile") { $pidfile=$ARGV[1]; shift @ARGV; } elsif($ARGV[0] eq "--ipv6") { $ipv6="--ipv6"; $ext="ipv6"; $grok_eprt = 1; } elsif($ARGV[0] eq "--port") { $port = $ARGV[1]; shift @ARGV; } } while(shift @ARGV); sub catch_zap { my $signame = shift; print STDERR "ftpserver.pl received SIG$signame, exiting\n"; ftpkillslaves(1); die "Somebody sent me a SIG$signame"; } $SIG{INT} = \&catch_zap; $SIG{KILL} = \&catch_zap; my $sfpid; local(*SFREAD, *SFWRITE); sub startsf { my $cmd="./server/sockfilt --port $port --logfile log/sockctrl$ftpdnum$ext.log --pidfile .sockfilt$ftpdnum$ext.pid $ipv6"; $sfpid = open2(*SFREAD, *SFWRITE, $cmd); print STDERR "$cmd\n" if($verbose); print SFWRITE "PING\n"; my $pong; sysread SFREAD, $pong, 5; if($pong !~ /^PONG/) { logmsg "Failed sockfilt command: $cmd\n"; kill(9, $sfpid); die "Failed to start sockfilt!"; } } # remove the file here so that if startsf() fails, it is very noticable unlink($pidfile); startsf(); logmsg sprintf("FTP server listens on port IPv%d/$port\n", $ipv6?6:4); open(PID, ">$pidfile"); print PID $$."\n"; close(PID); logmsg("logged pid $$ in $pidfile\n"); sub sockfilt { my $l; foreach $l (@_) { printf SFWRITE "DATA\n%04x\n", length($l); print SFWRITE $l; } } # Send data to the client on the control stream, which happens to be plain # stdout. sub sendcontrol { if(!$controldelay) { # spit it all out at once sockfilt @_; } else { my $a = join("", @_); my @a = split("", $a); for(@a) { sockfilt $_; select(undef, undef, undef, 0.01); } } my $log; foreach $log (@_) { my $l = $log; $l =~ s/[\r\n]//g; logmsg "> \"$l\"\n"; } } # Send data to the client on the data stream sub senddata { my $l; foreach $l (@_) { printf DWRITE "DATA\n%04x\n", length($l); print DWRITE $l; } } # USER is ok in fresh state my %commandok = ( 'USER' => 'fresh|passwd', 'PASS' => 'passwd', 'PASV' => 'loggedin|twosock', 'EPSV' => 'loggedin|twosock', 'PORT' => 'loggedin|twosock', 'EPRT' => 'loggedin|twosock', 'TYPE' => 'loggedin|twosock', 'LIST' => 'twosock', 'NLST' => 'twosock', 'RETR' => 'twosock', 'STOR' => 'twosock', 'APPE' => 'twosock', 'REST' => 'twosock', 'ACCT' => 'loggedin', 'CWD' => 'loggedin|twosock', 'SYST' => 'loggedin', 'SIZE' => 'loggedin|twosock', 'PWD' => 'loggedin|twosock', 'MKD' => 'loggedin|twosock', 'QUIT' => 'loggedin|twosock', 'RNFR' => 'loggedin|twosock', 'RNTO' => 'loggedin|twosock', 'DELE' => 'loggedin|twosock', 'MDTM' => 'loggedin|twosock', 'NOOP' => 'loggedin|twosock', ); # initially, we're in 'fresh' state my %statechange = ( 'USER' => 'passwd', # USER goes to passwd state 'PASS' => 'loggedin', # PASS goes to loggedin state 'PORT' => 'twosock', # PORT goes to twosock 'EPRT' => 'twosock', # EPRT goes to twosock 'PASV' => 'twosock', # PASV goes to twosock 'EPSV' => 'twosock', # EPSV goes to twosock ); # this text is shown before the function specified below is run my %displaytext = ('USER' => '331 We are happy you popped in!', 'PASS' => '230 Welcome you silly person', 'PORT' => '200 You said PORT - I say FINE', 'TYPE' => '200 I modify TYPE as you wanted', 'LIST' => '150 here comes a directory', 'NLST' => '150 here comes a directory', 'CWD' => '250 CWD command successful.', 'SYST' => '215 UNIX Type: L8', # just fake something 'QUIT' => '221 bye bye baby', # just reply something 'PWD' => '257 "/nowhere/anywhere" is current directory', 'MKD' => '257 Created your requested directory', 'REST' => '350 Yeah yeah we set it there for you', 'DELE' => '200 OK OK OK whatever you say', 'RNFR' => '350 Received your order. Please provide more', 'RNTO' => '250 Ok, thanks. File renaming completed.', 'NOOP' => '200 Yes, I\'m very good at doing nothing.', ); # callback functions for certain commands my %commandfunc = ( 'PORT' => \&PORT_command, 'EPRT' => \&PORT_command, 'LIST' => \&LIST_command, 'NLST' => \&NLST_command, 'PASV' => \&PASV_command, 'EPSV' => \&PASV_command, 'RETR' => \&RETR_command, 'SIZE' => \&SIZE_command, 'REST' => \&REST_command, 'STOR' => \&STOR_command, 'APPE' => \&STOR_command, # append looks like upload 'MDTM' => \&MDTM_command, ); sub close_dataconn { my ($closed)=@_; # non-zero if already disconnected if(!$closed) { logmsg "* disconnect data connection\n"; print DWRITE "DISC\n"; my $i; sysread DREAD, $i, 5; } else { logmsg "data connection already disconnected\n"; } logmsg "=====> Closed data connection\n"; logmsg "* quit sockfilt for data (pid $slavepid)\n"; print DWRITE "QUIT\n"; waitpid $slavepid, 0; $slavepid=0; } my $rest=0; sub REST_command { $rest = $_[0]; logmsg "Set REST position to $rest\n" } sub LIST_command { # print "150 ASCII data connection for /bin/ls (193.15.23.1,59196) (0 bytes)\r\n"; # this is a built-in fake-dir ;-) my @ftpdir=("total 20\r\n", "drwxr-xr-x 8 98 98 512 Oct 22 13:06 .\r\n", "drwxr-xr-x 8 98 98 512 Oct 22 13:06 ..\r\n", "drwxr-xr-x 2 98 98 512 May 2 1996 .NeXT\r\n", "-r--r--r-- 1 0 1 35 Jul 16 1996 README\r\n", "lrwxrwxrwx 1 0 1 7 Dec 9 1999 bin -> usr/bin\r\n", "dr-xr-xr-x 2 0 1 512 Oct 1 1997 dev\r\n", "drwxrwxrwx 2 98 98 512 May 29 16:04 download.html\r\n", "dr-xr-xr-x 2 0 1 512 Nov 30 1995 etc\r\n", "drwxrwxrwx 2 98 1 512 Oct 30 14:33 pub\r\n", "dr-xr-xr-x 5 0 1 512 Oct 1 1997 usr\r\n"); logmsg "pass LIST data on data connection\n"; for(@ftpdir) { senddata $_; } close_dataconn(0); sendcontrol "226 ASCII transfer complete\r\n"; return 0; } sub NLST_command { my @ftpdir=("file", "with space", "fake", "..", " ..", "funny", "README"); logmsg "pass NLST data on data connection\n"; for(@ftpdir) { senddata "$_\r\n"; } close_dataconn(0); sendcontrol "226 ASCII transfer complete\r\n"; return 0; } sub MDTM_command { my $testno = $_[0]; loadtest("$srcdir/data/test$testno"); my @data = getpart("reply", "mdtm"); my $reply = $data[0]; chomp $reply; if($reply <0) { sendcontrol "550 $testno: no such file.\r\n"; } elsif($reply) { sendcontrol "$reply\r\n"; } else { sendcontrol "500 MDTM: no such command.\r\n"; } return 0; } sub SIZE_command { my $testno = $_[0]; loadtest("$srcdir/data/test$testno"); if($testno eq "verifiedserver") { my $response = "WE ROOLZ: $$\r\n"; my $size = length($response); sendcontrol "213 $size\r\n"; return 0; } my @data = getpart("reply", "size"); my $size = $data[0]; if($size) { if($size > -1) { sendcontrol "213 $size\r\n"; } else { sendcontrol "550 $testno: No such file or directory.\r\n"; } } else { $size=0; @data = getpart("reply", "data"); for(@data) { $size += length($_); } if($size) { sendcontrol "213 $size\r\n"; } else { sendcontrol "550 $testno: No such file or directory.\r\n"; } } return 0; } sub RETR_command { my ($testno) = @_; if($testno =~ /^verifiedserver$/) { # this is the secret command that verifies that this actually is # the curl test server my $response = "WE ROOLZ: $$\r\n"; my $len = length($response); sendcontrol "150 Binary junk ($len bytes).\r\n"; senddata "WE ROOLZ: $$\r\n"; close_dataconn(0); sendcontrol "226 File transfer complete\r\n"; if($verbose) { print STDERR "FTPD: We returned proof we are the test server\n"; } return 0; } $testno =~ s/^([^0-9]*)//; loadtest("$srcdir/data/test$testno"); my @data = getpart("reply", "data"); my $size=0; for(@data) { $size += length($_); } my %hash = getpartattr("reply", "data"); if($size || $hash{'sendzero'}) { if($rest) { # move read pointer forward $size -= $rest; logmsg "REST $rest was removed from size, makes $size left\n"; $rest = 0; # reset REST offset again } if($retrweirdo) { sendcontrol "150 Binary data connection for $testno () ($size bytes).\r\n", "226 File transfer complete\r\n"; for(@data) { my $send = $_; senddata $send; } close_dataconn(0); $retrweirdo=0; # switch off the weirdo again! } else { my $sz = "($size bytes)"; if($retrnosize) { $sz = "size?"; } sendcontrol "150 Binary data connection for $testno () $sz.\r\n"; for(@data) { my $send = $_; senddata $send; } close_dataconn(0); sendcontrol "226 File transfer complete\r\n"; } } else { sendcontrol "550 $testno: No such file or directory.\r\n"; } return 0; } sub STOR_command { my $testno=$_[0]; my $filename = "log/upload.$testno"; logmsg "STOR test number $testno in $filename\n"; sendcontrol "125 Gimme gimme gimme!\r\n"; open(FILE, ">$filename") || return 0; # failed to open output my $line; my $ulsize=0; my $disc=0; while (5 == (sysread DREAD, $line, 5)) { if($line eq "DATA\n") { my $i; sysread DREAD, $i, 5; #print STDERR " GOT: $i"; my $size = hex($i); sysread DREAD, $line, $size; #print STDERR " GOT: $size bytes\n"; $ulsize += $size; print FILE $line if(!$nosave); logmsg "> Appending $size bytes to file\n"; } elsif($line eq "DISC\n") { # disconnect! $disc=1; last; } else { logmsg "No support for: $line"; last; } } if($nosave) { print FILE "$ulsize bytes would've been stored here\n"; } close(FILE); close_dataconn($disc); logmsg "received $ulsize bytes upload\n"; sendcontrol "226 File transfer complete\r\n"; return 0; } sub PASV_command { my ($arg, $cmd)=@_; my $pasvport; # We fire up a new sockfilt to do the data tranfer for us. $slavepid = open2(\*DREAD, \*DWRITE, "./server/sockfilt --port 0 --logfile log/sockdata$ftpdnum$ext.log --pidfile .sockdata$ftpdnum$ext.pid $ipv6"); print DWRITE "PING\n"; my $pong; sysread(DREAD, $pong, 5) || die; if($pong !~ /^PONG/) { kill(9, $slavepid); sendcontrol "500 no free ports!\r\n"; logmsg "failed to run sockfilt for data connection\n"; return 0; } logmsg "Run sockfilt for data on pid $slavepid\n"; # Find out what port we listen on my $i; print DWRITE "PORT\n"; # READ the response code sysread(DREAD, $i, 5) || die; # READ the response size sysread(DREAD, $i, 5) || die; my $size = hex($i); # READ the response data sysread(DREAD, $i, $size) || die; # The data is in the format # IPvX/NNN if($i =~ /IPv(\d)\/(\d+)/) { # FIX: deal with IP protocol version $pasvport = $2; } if($cmd ne "EPSV") { # PASV reply my $p="127,0,0,1"; if($pasvbadip) { $p="1,2,3,4"; } sendcontrol sprintf("227 Entering Passive Mode ($p,%d,%d)\n", ($pasvport/256), ($pasvport%256)); } else { # EPSV reply sendcontrol sprintf("229 Entering Passive Mode (|||%d|)\n", $pasvport); } eval { local $SIG{ALRM} = sub { die "alarm\n" }; # assume swift operations unless explicitly slow alarm ($controldelay?20:5); # Wait for 'CNCT' my $input; while(sysread(DREAD, $input, 5)) { if($input !~ /^CNCT/) { # we wait for a connected client logmsg "Odd, we got $input from client\n"; next; } logmsg "====> Client DATA connect\n"; last; } alarm 0; }; if ($@) { # timed out print DWRITE "QUIT\n"; waitpid $slavepid, 0; logmsg "accept failed\n"; $slavepid=0; return; } else { logmsg "data connection setup on port $pasvport\n"; } return; } # Support both PORT and EPRT here. Consider LPRT too. sub PORT_command { my ($arg, $cmd) = @_; my $port; # We always ignore the given IP and use localhost. if($cmd eq "PORT") { if($arg !~ /(\d+),(\d+),(\d+),(\d+),(\d+),(\d+)/) { logmsg "bad PORT-line: $arg\n"; sendcontrol "500 silly you, go away\r\n"; return 0; } $port = ($5<<8)+$6; } # EPRT |2|::1|49706| elsif(($cmd eq "EPRT") && ($grok_eprt)) { if($arg !~ /(\d+)\|([^\|]+)\|(\d+)/) { sendcontrol "500 silly you, go away\r\n"; return 0; } sendcontrol "200 Thanks for dropping by. We contact you later\r\n"; $port = $3; } else { sendcontrol "500 we don't like $cmd now\r\n"; return 0; } if(!$port || $port > 65535) { print STDERR "very illegal PORT number: $port\n"; return 1; } # We fire up a new sockfilt to do the data tranfer for us. # FIX: make it use IPv6 if need be $slavepid = open2(\*DREAD, \*DWRITE, "./server/sockfilt --connect $port --logfile log/sockdata$ftpdnum$ext.log --pidfile .sockdata$ftpdnum$ext.pid $ipv6"); print DWRITE "PING\n"; my $pong; sysread DREAD, $pong, 5; if($pong !~ /^PONG/) { logmsg "Failed sockfilt for data connection\n"; kill(9, $slavepid); } logmsg "====> Client DATA connect to port $port\n"; return; } my %customreply; my %customcount; my %delayreply; sub customize { undef %customreply; $nosave = 0; # default is to save as normal $controldelay = 0; # default is no delaying the responses open(CUSTOM, ") { if($_ =~ /REPLY ([A-Z]+) (.*)/) { $customreply{$1}=$2; logmsg "FTPD: set custom reply for $1\n"; } if($_ =~ /COUNT ([A-Z]+) (.*)/) { # we blank the customreply for this command when having # been used this number of times $customcount{$1}=$2; logmsg "FTPD: blank custom reply for $1 after $2 uses\n"; } elsif($_ =~ /DELAY ([A-Z]+) (\d*)/) { $delayreply{$1}=$2; logmsg "FTPD: delay reply for $1 with $2 seconds\n"; } elsif($_ =~ /SLOWDOWN/) { $controldelay=1; logmsg "FTPD: send response with 0.1 sec delay between each byte\n"; } elsif($_ =~ /RETRWEIRDO/) { logmsg "FTPD: instructed to use RETRWEIRDO\n"; $retrweirdo=1; } elsif($_ =~ /RETRNOSIZE/) { logmsg "FTPD: instructed to use RETRNOSIZE\n"; $retrnosize=1; } elsif($_ =~ /PASVBADIP/) { logmsg "FTPD: instructed to use PASVBADIP\n"; $pasvbadip=1; } elsif($_ =~ /NOSAVE/) { # don't actually store the file we upload - to be used when # uploading insanely huge amounts $nosave = 1; logmsg "FTPD: NOSAVE prevents saving of uploaded data\n"; } } close(CUSTOM); } my @welcome=( '220- _ _ ____ _ '."\r\n", '220- ___| | | | _ \| | '."\r\n", '220- / __| | | | |_) | | '."\r\n", '220- | (__| |_| | _ <| |___ '."\r\n", '220 \___|\___/|_| \_\_____|'."\r\n"); while(1) { # # We read 'sockfilt' commands. # my $input; logmsg "Awaiting input\n"; sysread(SFREAD, $input, 5) || die "ftp$ftpdnum$ext read zero"; if($input !~ /^CNCT/) { # we wait for a connected client logmsg "sockfilt said: $input"; next; } logmsg "====> Client connect\n"; # flush data: $| = 1; kill(9, $slavepid) if($slavepid); $slavepid=0; &customize(); # read test control instructions sendcontrol @welcome; if($verbose) { for(@welcome) { print STDERR "OUT: $_"; } } my $state="fresh"; while(1) { my $i; # Now we expect to read DATA\n[hex size]\n[prot], where the [prot] # part only is FTP lingo. # COMMAND sysread(SFREAD, $i, 5) || die "ftp$ftpdnum$ext read zero"; if($i !~ /^DATA/) { logmsg "sockfilt said $i"; if($i =~ /^DISC/) { # disconnect last; } next; } # SIZE of data sysread(SFREAD, $i, 5) || die; my $size = hex($i); # data sysread SFREAD, $_, $size; ftpmsg $_; # Remove trailing CRLF. s/[\n\r]+$//; unless (m/^([A-Z]{3,4})\s?(.*)/i) { sendcontrol "500 '$_': command not understood.\r\n"; last; } my $FTPCMD=$1; my $FTPARG=$2; my $full=$_; logmsg "< \"$full\"\n"; if($verbose) { print STDERR "IN: $full\n"; } my $ok = $commandok{$FTPCMD}; if($ok !~ /$state/) { sendcontrol "500 $FTPCMD not OK in state: $state!\r\n"; next; } my $newstate=$statechange{$FTPCMD}; if($newstate eq "") { # remain in the same state } else { if($state != $newstate) { logmsg "switch to state $state\n"; } $state = $newstate; } my $delay = $delayreply{$FTPCMD}; if($delay) { # just go sleep this many seconds! sleep($delay); } my $text; $text = $customreply{$FTPCMD}; my $fake = $text; if($text eq "") { $text = $displaytext{$FTPCMD}; } else { if($customcount{$FTPCMD} && (!--$customcount{$FTPCMD})) { # used enough number of times, now blank the customreply $customreply{$FTPCMD}=""; } } if($text) { sendcontrol "$text\r\n"; } if($fake eq "") { # only perform this if we're not faking a reply # see if the new state is a function caller. my $func = $commandfunc{$FTPCMD}; if($func) { # it is! &$func($FTPARG, $FTPCMD); } } } # while(1) logmsg "====> Client disconnected\n"; } print SFWRITE "QUIT\n"; waitpid $sfpid, 0; exit;