#!/usr/bin/perl #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) 1998 - 2004, Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at http://curl.haxx.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # $Id$ ########################################################################### # This is the FTP server designed for the curl test suite. # # It is meant to exercise curl, it is not meant to be a fully working # or even very standard compliant server. # # You may optionally specify port on the command line, otherwise it'll # default to port 8921. # use Socket; use FileHandle; use strict; require "getpart.pm"; open(FTPLOG, ">log/ftpd.log") || print STDERR "failed to open log file, runs without logging\n"; sub logmsg { print FTPLOG "$$: "; print FTPLOG @_; } sub ftpmsg { # append to the server.input file open(INPUT, ">>log/server.input") || logmsg "failed to open log/server.input\n"; INPUT->autoflush(1); print INPUT @_; close(INPUT); # use this, open->print->close system only to make the file # open as little as possible, to make the test suite run # better on windows/cygwin } my $verbose=0; # set to 1 for debugging my $retrweirdo=0; my $retrnosize=0; my $srcdir="."; my $port = 8921; # just a default do { if($ARGV[0] eq "-v") { $verbose=1; } elsif($ARGV[0] eq "-s") { $srcdir=$ARGV[1]; shift @ARGV; } elsif($ARGV[0] =~ /^(\d+)$/) { $port = $1; } } while(shift @ARGV); my $proto = getprotobyname('tcp') || 6; socket(Server, PF_INET, SOCK_STREAM, $proto)|| die "socket: $!"; setsockopt(Server, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die "setsockopt: $!"; bind(Server, sockaddr_in($port, INADDR_ANY))|| die "bind: $!"; listen(Server,SOMAXCONN) || die "listen: $!"; #print "FTP server started on port $port\n"; open(PID, ">.ftp.pid"); print PID $$; close(PID); my $waitedpid = 0; my $paddr; sub REAPER { $waitedpid = wait; $SIG{CHLD} = \&REAPER; # loathe sysV logmsg "reaped $waitedpid" . ($? ? " with exit $?\n" : "\n"); } # USER is ok in fresh state my %commandok = ( 'USER' => 'fresh', 'PASS' => 'passwd', 'PASV' => 'loggedin|twosock', 'EPSV' => 'loggedin|twosock', 'PORT' => 'loggedin|twosock', 'TYPE' => 'loggedin|twosock', 'LIST' => 'twosock', 'NLST' => 'twosock', 'RETR' => 'twosock', 'STOR' => 'twosock', 'APPE' => 'twosock', 'REST' => 'twosock', 'CWD' => 'loggedin|twosock', 'SYST' => 'loggedin', 'SIZE' => 'loggedin|twosock', 'PWD' => 'loggedin|twosock', 'MKD' => 'loggedin|twosock', 'QUIT' => 'loggedin|twosock', 'RNFR' => 'loggedin|twosock', 'RNTO' => 'loggedin|twosock', 'DELE' => 'loggedin|twosock', 'MDTM' => 'loggedin|twosock', ); # initially, we're in 'fresh' state my %statechange = ( 'USER' => 'passwd', # USER goes to passwd state 'PASS' => 'loggedin', # PASS goes to loggedin state 'PORT' => 'twosock', # PORT goes to twosock 'PASV' => 'twosock', # PASV goes to twosock 'EPSV' => 'twosock', # EPSV goes to twosock ); # this text is shown before the function specified below is run my %displaytext = ('USER' => '331 We are happy you popped in!', 'PASS' => '230 Welcome you silly person', 'PORT' => '200 You said PORT - I say FINE', 'TYPE' => '200 I modify TYPE as you wanted', 'LIST' => '150 here comes a directory', 'NLST' => '150 here comes a directory', 'CWD' => '250 CWD command successful.', 'SYST' => '215 UNIX Type: L8', # just fake something 'QUIT' => '221 bye bye baby', # just reply something 'PWD' => '257 "/nowhere/anywhere" is current directory', 'MKD' => '257 Created your requested directory', 'REST' => '350 Yeah yeah we set it there for you', 'DELE' => '200 OK OK OK whatever you say', 'RNFR' => '350 Received your order. Please provide more', 'RNTO' => '250 Ok, thanks. File renaming completed.', ); # callback functions for certain commands my %commandfunc = ( 'PORT' => \&PORT_command, 'LIST' => \&LIST_command, 'NLST' => \&NLST_command, 'PASV' => \&PASV_command, 'EPSV' => \&PASV_command, 'RETR' => \&RETR_command, 'SIZE' => \&SIZE_command, 'REST' => \&REST_command, 'STOR' => \&STOR_command, 'APPE' => \&STOR_command, # append looks like upload 'MDTM' => \&MDTM_command, ); my $rest=0; sub REST_command { $rest = $_[0]; logmsg "Set REST position to $rest\n" } sub LIST_command { # print "150 ASCII data connection for /bin/ls (193.15.23.1,59196) (0 bytes)\r\n"; # this is a built-in fake-dir ;-) my @ftpdir=("total 20\r\n", "drwxr-xr-x 8 98 98 512 Oct 22 13:06 .\r\n", "drwxr-xr-x 8 98 98 512 Oct 22 13:06 ..\r\n", "drwxr-xr-x 2 98 98 512 May 2 1996 .NeXT\r\n", "-r--r--r-- 1 0 1 35 Jul 16 1996 README\r\n", "lrwxrwxrwx 1 0 1 7 Dec 9 1999 bin -> usr/bin\r\n", "dr-xr-xr-x 2 0 1 512 Oct 1 1997 dev\r\n", "drwxrwxrwx 2 98 98 512 May 29 16:04 download.html\r\n", "dr-xr-xr-x 2 0 1 512 Nov 30 1995 etc\r\n", "drwxrwxrwx 2 98 1 512 Oct 30 14:33 pub\r\n", "dr-xr-xr-x 5 0 1 512 Oct 1 1997 usr\r\n"); logmsg "$$: pass data to child pid\n"; for(@ftpdir) { print SOCK $_; } close(SOCK); logmsg "$$: done passing data to child pid\n"; print "226 ASCII transfer complete\r\n"; return 0; } sub NLST_command { my @ftpdir=("file", "with space", "fake", "..", " ..", "funny", "README"); for(@ftpdir) { print SOCK "$_\r\n"; } close(SOCK); print "226 ASCII transfer complete\r\n"; return 0; } sub MDTM_command { my $testno = $_[0]; loadtest("$srcdir/data/test$testno"); logmsg "MDTM $testno\n"; my @data = getpart("reply", "mdtm"); my $reply = $data[0]; chomp $reply; if($reply <0) { print "550 $testno: no such file.\r\n"; logmsg "MDTM $testno: no such file\n"; } elsif($reply) { print "$reply\r\n"; logmsg "MDTM $testno returned $reply\n"; } else { print "500 MDTM: no such command.\r\n"; logmsg "MDTM: no such command\n"; } return 0; } sub SIZE_command { my $testno = $_[0]; loadtest("$srcdir/data/test$testno"); logmsg "SIZE number $testno\n"; my @data = getpart("reply", "size"); my $size = $data[0]; if($size) { if($size > -1) { print "213 $size\r\n"; logmsg "SIZE $testno returned $size\n"; } else { print "550 $testno: No such file or directory.\r\n"; logmsg "SIZE $testno: no such file\n"; } } else { $size=0; @data = getpart("reply", "data"); for(@data) { $size += length($_); } if($size) { print "213 $size\r\n"; logmsg "SIZE $testno returned $size\n"; } else { print "550 $testno: No such file or directory.\r\n"; logmsg "SIZE $testno: no such file\n"; } } return 0; } sub RETR_command { my $testno = $_[0]; logmsg "RETR test number $testno\n"; if($testno =~ /^verifiedserver$/) { # this is the secret command that verifies that this actually is # the curl test server print "150 Binary junk (10 bytes).\r\n"; print SOCK "WE ROOLZ: $$\r\n"; close(SOCK); print "226 File transfer complete\r\n"; if($verbose) { print STDERR "FTPD: We returned proof we are the test server\n"; } logmsg "we returned proof that we are the test server\n"; return 0; } loadtest("$srcdir/data/test$testno"); my @data = getpart("reply", "data"); my $size=0; for(@data) { $size += length($_); } if($size) { if($rest) { # move read pointer forward $size -= $rest; logmsg "REST $rest was removed from size, makes $size left\n"; $rest = 0; # reset REST offset again } if($retrweirdo) { print "150 Binary data connection for $testno () ($size bytes).\r\n", "226 File transfer complete\r\n"; logmsg "150+226 in one shot!\n"; for(@data) { my $send = $_; print SOCK $send; } close(SOCK); $retrweirdo=0; # switch off the weirdo again! } else { my $sz = "($size bytes)"; if($retrnosize) { $sz = "size?"; } print "150 Binary data connection for $testno () $sz.\r\n"; logmsg "150 Binary data connection for $testno () $sz.\n"; for(@data) { my $send = $_; print SOCK $send; } close(SOCK); print "226 File transfer complete\r\n"; } } else { print "550 $testno: No such file or directory.\r\n"; logmsg "550 $testno: no such file\n"; } return 0; } sub STOR_command { my $testno=$_[0]; my $filename = "log/upload.$testno"; logmsg "STOR test number $testno in $filename\n"; print "125 Gimme gimme gimme!\r\n"; open(FILE, ">$filename") || return 0; # failed to open output my $line; my $ulsize=0; while (defined($line = )) { $ulsize += length($line); print FILE $line; } close(FILE); close(SOCK); logmsg "received $ulsize bytes upload\n"; print "226 File transfer complete\r\n"; return 0; } my $pasvport=9000; sub PASV_command { my ($arg, $cmd)=@_; socket(Server2, PF_INET, SOCK_STREAM, $proto) || die "socket: $!"; setsockopt(Server2, SOL_SOCKET, SO_REUSEADDR, pack("l", 1)) || die "setsockopt: $!"; my $ok=0; $pasvport++; # don't reuse the previous for(1 .. 10) { if($pasvport > 65535) { $pasvport = 1025; } if(bind(Server2, sockaddr_in($pasvport, INADDR_ANY))) { $ok=1; last; } $pasvport+= 3; # try another port please } if(!$ok) { print "500 no free ports!\r\n"; logmsg "couldn't find free port\n"; return 0; } listen(Server2,SOMAXCONN) || die "listen: $!"; if($cmd ne "EPSV") { # PASV reply logmsg "replying to a $cmd command\n"; printf("227 Entering Passive Mode (127,0,0,1,%d,%d)\n", ($pasvport/256), ($pasvport%256)); } else { # EPSV reply logmsg "replying to a $cmd command\n"; printf("229 Entering Passive Mode (|||%d|)\n", $pasvport); } my $paddr = accept(SOCK, Server2); my($iport,$iaddr) = sockaddr_in($paddr); my $name = gethostbyaddr($iaddr,AF_INET); close(Server2); # close the listener when its served its purpose! logmsg "$$: data connection from $name [", inet_ntoa($iaddr), "] at port $iport\n"; return; } sub PORT_command { my $arg = $_[0]; if($arg !~ /(\d+),(\d+),(\d+),(\d+),(\d+),(\d+)/) { logmsg "bad PORT-line: $arg\n"; print "500 silly you, go away\r\n"; return 0; } my $iaddr = inet_aton("$1.$2.$3.$4"); my $port = ($5<<8)+$6; if(!$port || $port > 65535) { print STDERR "very illegal PORT number: $port\n"; return 1; } my $paddr = sockaddr_in($port, $iaddr); my $proto = getprotobyname('tcp') || 6; socket(SOCK, PF_INET, SOCK_STREAM, $proto) || die "major failure"; connect(SOCK, $paddr) || return 1; return \&SOCK; } $SIG{CHLD} = \&REAPER; my %customreply; my %customcount; my %delayreply; sub customize { undef %customreply; open(CUSTOM, ") { if($_ =~ /REPLY ([A-Z]+) (.*)/) { $customreply{$1}=$2; } if($_ =~ /COUNT ([A-Z]+) (.*)/) { # we blank the customreply for this command when having # been used this number of times $customcount{$1}=$2; } elsif($_ =~ /DELAY ([A-Z]+) (\d*)/) { $delayreply{$1}=$2; } elsif($_ =~ /RETRWEIRDO/) { print "instructed to use RETRWEIRDO\n"; $retrweirdo=1; } elsif($_ =~ /RETRNOSIZE/) { print "instructed to use RETRNOSIZE\n"; $retrnosize=1; } } close(CUSTOM); } my @welcome=( '220- _ _ ____ _ '."\r\n", '220- ___| | | | _ \| | '."\r\n", '220- / __| | | | |_) | | '."\r\n", '220- | (__| |_| | _ <| |___ '."\r\n", '220 \___|\___/|_| \_\_____|'."\r\n"); for ( $waitedpid = 0; ($paddr = accept(Client,Server)) || $waitedpid; $waitedpid = 0, close Client) { next if $waitedpid and not $paddr; my($port,$iaddr) = sockaddr_in($paddr); my $name = gethostbyaddr($iaddr,AF_INET); # flush data: $| = 1; logmsg "connection from $name [", inet_ntoa($iaddr), "] at port $port\n"; open(STDIN, "<&Client") || die "can't dup client to stdin"; open(STDOUT, ">&Client") || die "can't dup client to stdout"; FTPLOG->autoflush(1); &customize(); # read test control instructions print @welcome; if($verbose) { for(@welcome) { print STDERR "OUT: $_"; } } my $state="fresh"; while(1) { last unless defined ($_ = ); ftpmsg $_; # Remove trailing CRLF. s/[\n\r]+$//; unless (m/^([A-Z]{3,4})\s?(.*)/i) { print "500 '$_': command not understood.\r\n"; logmsg "unknown crap received, bailing out hard\n"; last; } my $FTPCMD=$1; my $FTPARG=$2; my $full=$_; logmsg "GOT: ($1) $_\n"; if($verbose) { print STDERR "IN: $full\n"; } my $ok = $commandok{$FTPCMD}; if($ok !~ /$state/) { print "500 $FTPCMD not OK in state: $state!\r\n"; next; } my $newstate=$statechange{$FTPCMD}; if($newstate eq "") { # remain in the same state } else { $state = $newstate; } my $delay = $delayreply{$FTPCMD}; if($delay) { # just go sleep this many seconds! sleep($delay); } my $text; $text = $customreply{$FTPCMD}; my $fake = $text; if($text eq "") { $text = $displaytext{$FTPCMD}; } else { if($customcount{$FTPCMD} && (!--$customcount{$FTPCMD})) { # used enough number of times, now blank the customreply $customreply{$FTPCMD}=""; } logmsg "$FTPCMD made to send '$text'\n"; } if($text) { print "$text\r\n"; } if($fake eq "") { # only perform this if we're not faking a reply # see if the new state is a function caller. my $func = $commandfunc{$FTPCMD}; if($func) { # it is! \&$func($FTPARG, $FTPCMD); } } logmsg "set to state $state\n"; } # while(1) close(Client); }