#!/usr/bin/env perl # $Id$ # # Main curl test script, in perl to run on more platforms # ####################################################################### # These should be the only variables that might be needed to get edited: use strict; #use warnings; @INC=(@INC, $ENV{'srcdir'}, "."); require "getpart.pm"; # array functions my $srcdir = $ENV{'srcdir'} || '.'; my $HOSTIP="127.0.0.1"; my $HOSTPORT=8999; # bad name, but this is the HTTP server port my $HTTPSPORT=8433; # this is the HTTPS server port my $FTPPORT=8921; # this is the FTP server port my $FTPSPORT=8821; # this is the FTPS server port my $CURL="../src/curl"; # what curl executable to run on the tests my $DBGCURL=$CURL; #"../src/.libs/curl"; # alternative for debugging my $LOGDIR="log"; my $TESTDIR="data"; my $LIBDIR="./libtest"; my $SERVERIN="$LOGDIR/server.input"; # what curl sent the server my $CURLLOG="$LOGDIR/curl.log"; # all command lines run my $FTPDCMD="$LOGDIR/ftpserver.cmd"; # copy ftp server instructions here # Normally, all test cases should be run, but at times it is handy to # simply run a particular one: my $TESTCASES="all"; # To run specific test cases, set them like: # $TESTCASES="1 2 3 7 8"; ####################################################################### # No variables below this point should need to be modified # my $HTTPPIDFILE=".http.pid"; my $HTTPSPIDFILE=".https.pid"; my $FTPPIDFILE=".ftp.pid"; my $FTPSPIDFILE=".ftps.pid"; # invoke perl like this: my $perl="perl -I$srcdir"; # this gets set if curl is compiled with debugging: my $curl_debug=0; # name of the file that the memory debugging creates: my $memdump="memdump"; # the path to the script that analyzes the memory debug output file: my $memanalyze="./memanalyze.pl"; my $checkstunnel = checkcmd("stunnel"); my $checkvalgrind = checkcmd("valgrind"); my $ssl_version; # set if libcurl is built with SSL support my $skipped=0; # number of tests skipped; reported in main loop my %skipped; # skipped{reason}=counter, reasons for skip my @teststat; # teststat[testnum]=reason, reasons for skip if($checkvalgrind) { # we have found valgrind on the host, use it # perhaps we should verify that valgrind works before we actually use it? $CURL="valgrind --leak-check=yes --logfile-fd=3 -q $CURL"; } ####################################################################### # variables the command line options may set # my $short; my $verbose; my $debugprotocol; my $anyway; my $gdbthis; # run test case with gdb debugger my $keepoutfiles; # keep stdout and stderr files after tests my $listonly; # only list the tests my $pwd; # current working directory my %run; # running server # torture test variables my $torture; my $tortnum; my $tortalloc; chomp($pwd = `pwd`); # enable memory debugging if curl is compiled with it $ENV{'CURL_MEMDEBUG'} = 1; $ENV{'HOME'}=$pwd; ########################################################################## # Clear all possible '*_proxy' environment variables for various protocols # to prevent them to interfere with our testing! my $protocol; foreach $protocol (('ftp', 'http', 'ftps', 'https', 'gopher', 'no')) { my $proxy = "${protocol}_proxy"; # clear lowercase version $ENV{$proxy}=undef; # clear uppercase version $ENV{uc($proxy)}=undef; } ####################################################################### # Check for a command in the PATH. # sub checkcmd { my ($cmd)=@_; my @paths=("/usr/sbin", "/usr/local/sbin", "/sbin", "/usr/bin", "/usr/local/bin", split(":", $ENV{'PATH'})); for(@paths) { if( -x "$_/$cmd") { return "$_/$cmd"; } } } ####################################################################### # Return the pid of the server as found in the given pid file # sub serverpid { my $PIDFILE = $_[0]; open(PFILE, "<$PIDFILE"); my $PID=0+; close(PFILE); return $PID; } ####################################################################### # Memory allocation test and failure torture testing. # sub torture { # start all test servers (http, https, ftp, ftps) &startservers(("http", "https", "ftp", "ftps")); my $c; my @test=('http://%HOSTIP:%HOSTPORT/1', 'ftp://%HOSTIP:%FTPPORT/'); # loop over the different tests commands for(@test) { my $cmdargs = "$_"; $c++; if($tortnum && ($tortnum != $c)) { next; } print "We want test $c\n"; my $redir=">log/torture.stdout 2>log/torture.stderr"; subVariables(\$cmdargs); my $testcmd = "$CURL $cmdargs $redir"; # First get URL from test server, ignore the output/result system($testcmd); # Set up gdb-stuff if desired if($gdbthis) { open(GDBCMD, ">log/gdbcmd"); print GDBCMD "set args $cmdargs\n"; print GDBCMD "show args\n"; close(GDBCMD); $testcmd = "gdb $CURL -x log/gdbcmd"; } print "Torture test $c:\n"; print " CMD: $testcmd\n" if($verbose); # memanalyze -v is our friend, get the number of allocations made my $count; my @out = `$memanalyze -v $memdump`; for(@out) { if(/^Allocations: (\d+)/) { $count = $1; last; } } if(!$count) { # hm, no allocations in this fetch, ignore and get next print "BEEEP, no allocs found for test $c!!!\n"; next; } print " $count allocations to excersize\n"; for ( 1 .. $count ) { my $limit = $_; my $fail; if($tortalloc && ($tortalloc != $limit)) { next; } print "Alloc no: $limit\r" if(!$gdbthis); # make the memory allocation function number $limit return failure $ENV{'CURL_MEMLIMIT'} = $limit; # remove memdump first to be sure we get a new nice and clean one unlink($memdump); print "**> Alloc number $limit is now set to fail <**\n" if($gdbthis); my $ret = system($testcmd); # verify that it returns a proper error code, doesn't leak memory # and doesn't core dump if($ret & 255) { print " system() returned $ret\n"; $fail=1; } else { my @memdata=`$memanalyze $memdump`; my $leak=0; for(@memdata) { if($_ ne "") { # well it could be other memory problems as well, but # we call it leak for short here $leak=1; } } if($leak) { print "** MEMORY FAILURE\n"; print @memdata; print `$memanalyze -l $memdump`; $fail = 1; } } if($fail) { print " Failed on alloc number $limit in test $c.\n", " invoke with -t$c,$limit to repeat this single case.\n"; stopservers(); exit 1; } } print "\n torture test $c did GOOD\n"; # all is well, now test a different kind of URL } stopservers(); exit; # for now, we stop after these tests } ####################################################################### # stop the given test server # sub stopserver { my $pid = $_[0]; # check for pidfile if ( -f $pid ) { my $PIDFILE = $pid; $pid = serverpid($PIDFILE); unlink $PIDFILE; # server is killed } elsif($pid <= 0) { return; # this is not a good pid } my $res = kill (9, $pid); # die! if($res && $verbose) { print "RUN: Test server pid $pid signalled to die\n"; } elsif($verbose) { print "RUN: Test server pid $pid didn't exist\n"; } } ####################################################################### # check the given test server if it is still alive # sub checkserver { my ($pidfile)=@_; my $pid=0; # check for pidfile if ( -f $pidfile ) { $pid=serverpid($pidfile); if ($pid ne "" && kill(0, $pid)) { return $pid; } else { return -$pid; # negative means dead process } } return 0; } ####################################################################### # start the http server, or if it already runs, verify that it is our # test server on the test-port! # sub runhttpserver { my $verbose = $_[0]; my $RUNNING; my $pid; $pid = checkserver ($HTTPPIDFILE); # verify if our/any server is running on this port my $cmd = "$CURL -o log/verifiedserver --silent -i $HOSTIP:$HOSTPORT/verifiedserver 2>/dev/null"; print "CMD; $cmd\n" if ($verbose); my $res = system($cmd); $res >>= 8; # rotate the result my $data; print "RUN: curl command returned $res\n" if ($verbose); open(FILE, "; close(FILE); $data=$file[0]; # first line if ( $data =~ /WE ROOLZ: (\d+)/ ) { $pid = 0+$1; } elsif($data) { print "RUN: Unknown HTTP server is running on port $HOSTPORT\n"; return -2; } if($pid > 0) { my $res = kill (9, $pid); # die! if(!$res) { print "RUN: Failed to kill test HTTP server, do it manually and", " restart the tests.\n"; exit; } sleep(1); } my $flag=$debugprotocol?"-v ":""; $cmd="$perl $srcdir/httpserver.pl $flag $HOSTPORT &"; system($cmd); if($verbose) { print "CMD: $cmd\n"; } my $verified; for(1 .. 5) { # verify that our server is up and running: my $data=`$CURL --silent -i $HOSTIP:$HOSTPORT/verifiedserver 2>/dev/null`; if ( $data =~ /WE ROOLZ: (\d+)/ ) { $pid = 0+$1; $verified = 1; last; } else { sleep(1); next; } } if(!$verified) { print STDERR "RUN: failed to start our HTTP server\n"; return -1; } if($verbose) { print "RUN: HTTP server is now verified to be our server\n"; } return $pid; } ####################################################################### # start the https server (or rather, tunnel) if needed # sub runhttpsserver { my $verbose = $_[0]; my $STATUS; my $RUNNING; my $pid=checkserver($HTTPSPIDFILE ); if($pid > 0) { # kill previous stunnel! if($verbose) { print "RUN: kills off running stunnel at $pid\n"; } stopserver($HTTPSPIDFILE); } my $flag=$debugprotocol?"-v ":""; my $cmd="$perl $srcdir/httpsserver.pl $flag -d $srcdir -r $HOSTPORT $HTTPSPORT &"; system($cmd); if($verbose) { print "CMD: $cmd\n"; } sleep(1); $pid=checkserver($HTTPSPIDFILE); return $pid; } ####################################################################### # start the ftp server if needed # sub runftpserver { my $verbose = $_[0]; my $STATUS; my $RUNNING; # check for pidfile my $pid = checkserver ($FTPPIDFILE ); if ($pid <= 0) { print "RUN: Check port $FTPPORT for our own FTP server\n" if ($verbose); my $time=time(); # check if this is our server running on this port: my $data=`$CURL -m4 --silent -i ftp://$HOSTIP:$FTPPORT/verifiedserver 2>/dev/null`; # if this took more than 2 secs, we assume it "hung" on a weird server my $took = time()-$time; if ( $data =~ /WE ROOLZ: (\d+)/ ) { # this is our test server with a known pid! $pid = 0+$1; } else { if($data || ($took > 2)) { # this is not a known server print "RUN: Unknown server on our favourite port: $FTPPORT\n"; return -1; } } } if($pid > 0) { print "RUN: Killing a previous server using pid $pid\n" if($verbose); my $res = kill (9, $pid); # die! if(!$res) { print "RUN: Failed to kill our FTP test server, do it manually and", " restart the tests.\n"; return -1; } sleep(1); } # now (re-)start our server: my $flag=$debugprotocol?"-v ":""; my $cmd="$perl $srcdir/ftpserver.pl $flag $FTPPORT &"; if($verbose) { print "CMD: $cmd\n"; } system($cmd); my $verified; for(1 .. 5) { # verify that our server is up and running: my $data=`$CURL --silent -i ftp://$HOSTIP:$FTPPORT/verifiedserver 2>/dev/null`; if ( $data =~ /WE ROOLZ: (\d+)/ ) { $pid = 0+$1; $verified = 1; last; } else { if($verbose) { print STDERR "RUN: Retrying FTP server existance in 1 sec\n"; } sleep(1); next; } } if(!$verified) { warn "RUN: failed to start our FTP server\n"; return -2; } if($verbose) { print "RUN: FTP server is now verified to be our server\n"; } return $pid; } ####################################################################### # start the ftps server (or rather, tunnel) if needed # sub runftpsserver { my $verbose = $_[0]; my $STATUS; my $RUNNING; my $pid=checkserver($FTPSPIDFILE ); if($pid > 0) { # kill previous stunnel! if($verbose) { print "kills off running stunnel at $pid\n"; } stopserver($FTPSPIDFILE); } my $flag=$debugprotocol?"-v ":""; my $cmd="$perl $srcdir/ftpsserver.pl $flag -d $srcdir -r $FTPPORT $FTPSPORT &"; system($cmd); if($verbose) { print "CMD: $cmd\n"; } sleep(1); $pid=checkserver($FTPSPIDFILE ); return $pid; } ####################################################################### # Remove all files in the specified directory # sub cleardir { my $dir = $_[0]; my $count; my $file; # Get all files opendir(DIR, $dir) || return 0; # can't open dir while($file = readdir(DIR)) { if($file !~ /^\./) { unlink("$dir/$file"); $count++; } } closedir DIR; return $count; } ####################################################################### # filter out the specified pattern from the given input file and store the # results in the given output file # sub filteroff { my $infile=$_[0]; my $filter=$_[1]; my $ofile=$_[2]; open(IN, "<$infile") || return 1; open(OUT, ">$ofile") || return 1; # print "FILTER: off $filter from $infile to $ofile\n"; while() { $_ =~ s/$filter//; print OUT $_; } close(IN); close(OUT); return 0; } ####################################################################### # compare test results with the expected output, we might filter off # some pattern that is allowed to differ, output test results # sub compare { # filter off patterns _before_ this comparison! my ($subject, $firstref, $secondref)=@_; my $result = compareparts($firstref, $secondref); if($result) { if(!$short) { print "\n $subject FAILED:\n"; print showdiff($firstref, $secondref); } else { print "FAILED\n"; } } return $result; } ####################################################################### # display information about curl and the host the test suite runs on # sub checkcurl { unlink($memdump); # remove this if there was one left my $curl; my $libcurl; my @version=`$CURL -V 2>/dev/null`; for(@version) { chomp; if($_ =~ /^curl/) { $curl = $_; $curl =~ s/^(.*)(libcurl.*)/$1/g; $libcurl = $2; if ($curl =~ /win32/) { # Native Windows builds don't understand the # output of cygwin's pwd. It will be # something like /cygdrive/c/. # # Use the cygpath utility to convert the # working directory to a Windows friendly # path. The -m option converts to use drive # letter:, but it uses / instead \. Forward # slashes (/) are easier for us. We don't # have to escape them to get them to curl # through a shell. chomp($pwd = `cygpath -m $pwd`); } } elsif($_ =~ /^Protocols: (.*)/i) { # these are the supported protocols, we don't use this knowledge # at this point } elsif($_ =~ /^Features: (.*)/i) { my $feat = $1; if($feat =~ /debug/i) { # debug is a listed "feature", use that knowledge $curl_debug = 1; # set the NETRC debug env $ENV{'CURL_DEBUG_NETRC'} = 'log/netrc'; } if($feat =~ /SSL/i) { # ssl enabled $ssl_version=1; } } } my $hostname=`hostname`; my $hosttype=`uname -a`; print "********* System characteristics ******** \n", "* $curl\n", "* $libcurl\n", "* Host: $hostname", "* System: $hosttype"; printf("* Server SSL: %s\n", $checkstunnel?"ON":"OFF"); printf("* libcurl SSL: %s\n", $ssl_version?"ON":"OFF"); printf("* libcurl debug: %s\n", $curl_debug?"ON":"OFF"); printf("* valgrind: %s\n", $checkvalgrind?"ON":"OFF"); print "***************************************** \n"; } ####################################################################### # substitute the variable stuff into either a joined up file or # a command, in either case passed by reference # sub subVariables { my ($thing) = @_; $$thing =~ s/%HOSTIP/$HOSTIP/g; $$thing =~ s/%HOSTPORT/$HOSTPORT/g; $$thing =~ s/%HTTPSPORT/$HTTPSPORT/g; $$thing =~ s/%FTPPORT/$FTPPORT/g; $$thing =~ s/%FTPSPORT/$FTPSPORT/g; $$thing =~ s/%SRCDIR/$srcdir/g; $$thing =~ s/%PWD/$pwd/g; } ####################################################################### # Run a single specified test case # sub singletest { my $testnum=$_[0]; my @what; my $why; my $serverproblem; # load the test case file definition if(loadtest("${TESTDIR}/test${testnum}")) { if($verbose) { # this is not a test print "RUN: $testnum doesn't look like a test case!\n"; } $serverproblem = 100; } else { @what = getpart("client", "features"); } printf("test %03d...", $testnum); for(@what) { my $f = $_; $f =~ s/\s//g; if($f eq "SSL") { if($ssl_version) { next; } } elsif($f eq "netrc_debug") { if($curl_debug) { next; } } $why = "lacks $f"; $serverproblem = 15; # set it here last; } if(!$serverproblem) { $serverproblem = serverfortest($testnum); } if($serverproblem) { # there's a problem with the server, don't run # this particular server, but count it as "skipped" if($serverproblem == 2) { $why = "server problems"; } elsif($serverproblem == 100) { $why = "no test"; } elsif($serverproblem == 99) { $why = "bad test"; } elsif($serverproblem == 15) { # set above, a lacking prereq } elsif($serverproblem == 1) { $why = "no SSL-capable server"; } else { $why = "unfulfilled requirements"; } $skipped++; $skipped{$why}++; $teststat[$testnum]=$why; # store reason for this test case print "SKIPPED\n"; if(!$short) { print "* Test $testnum: $why\n"; } return -1; } # extract the reply data my @reply = getpart("reply", "data"); my @replycheck = getpart("reply", "datacheck"); if (@replycheck) { # we use this file instead to check the final output against my %hash = getpartattr("reply", "datacheck"); if($hash{'nonewline'}) { # Yes, we must cut off the final newline from the final line # of the datacheck chomp($replycheck[$#replycheck]); } @reply=@replycheck; } # curl command to run my @curlcmd= getpart("client", "command"); # this is the valid protocol blurb curl should generate my @protocol= getpart("verify", "protocol"); # redirected stdout/stderr to these files $STDOUT="$LOGDIR/stdout$testnum"; $STDERR="$LOGDIR/stderr$testnum"; # if this section exists, we verify that the stdout contained this: my @validstdout = getpart("verify", "stdout"); # if this section exists, we verify upload my @upload = getpart("verify", "upload"); # if this section exists, it is FTP server instructions: my @ftpservercmd = getpart("server", "instruction"); my $CURLOUT="$LOGDIR/curl$testnum.out"; # curl output if not stdout # name of the test my @testname= getpart("client", "name"); if(!$short) { my $name = $testname[0]; $name =~ s/\n//g; print "[$name]\n"; } if($listonly) { return 0; # look successful } my @codepieces = getpart("client", "tool"); my $tool=""; if(@codepieces) { $tool = $codepieces[0]; chomp $tool; } # remove previous server output logfile unlink($SERVERIN); if(@ftpservercmd) { # write the instructions to file writearray($FTPDCMD, \@ftpservercmd); } my (@setenv)= getpart("client", "setenv"); my @envs; my $s; for $s (@setenv) { chomp $s; # cut off the newline subVariables \$s; if($s =~ /([^=]*)=(.*)/) { my ($var, $content)=($1, $2); $ENV{$var}=$content; # remember which, so that we can clear them afterwards! push @envs, $var; } } # get the command line options to use my ($cmd, @blaha)= getpart("client", "command"); # make some nice replace operations $cmd =~ s/\n//g; # no newlines please # substitute variables in the command line subVariables \$cmd; if($curl_debug) { unlink($memdump); } my @inputfile=getpart("client", "file"); if(@inputfile) { # we need to generate a file before this test is invoked my %hash = getpartattr("client", "file"); my $filename=$hash{'name'}; if(!$filename) { print "ERROR: section client=>file has no name attribute!\n"; exit; } my $fileContent = join('', @inputfile); subVariables \$fileContent; # print "DEBUG: writing file " . $filename . "\n"; open OUTFILE, ">$filename"; binmode OUTFILE; # for crapage systems, use binary print OUTFILE $fileContent; close OUTFILE; } my %cmdhash = getpartattr("client", "command"); my $out=""; if($cmdhash{'option'} !~ /no-output/) { #We may slap on --output! if (!@validstdout) { $out=" --output $CURLOUT "; } } my $cmdargs; if(!$tool) { # run curl, add -v for debug information output $cmdargs ="$out --include -v $cmd"; } else { $cmdargs = " $cmd"; # $cmd is the command line for the test file $CURLOUT = $STDOUT; # sends received data to stdout } my @stdintest = getpart("client", "stdin"); if(@stdintest) { my $stdinfile="$LOGDIR/stdin-for-$testnum"; writearray($stdinfile, \@stdintest); $cmdargs .= " <$stdinfile"; } if($checkvalgrind) { $cmdargs .= " 3>log/valgrind$testnum"; } my $CMDLINE; if(!$tool) { $CMDLINE="$CURL"; } else { $CMDLINE="$LIBDIR/$tool"; $DBGCURL=$CMDLINE; } $CMDLINE .= "$cmdargs >>$STDOUT 2>>$STDERR"; if($verbose) { print "$CMDLINE\n"; } print CMDLOG "$CMDLINE\n"; my $res; # run the command line we built if($gdbthis) { open(GDBCMD, ">log/gdbcmd"); print GDBCMD "set args $cmdargs\n"; print GDBCMD "show args\n"; close(GDBCMD); system("gdb --directory libtest $DBGCURL -x log/gdbcmd"); $res =0; # makes it always continue after a debugged run } else { $res = system("$CMDLINE"); $res /= 256; } # remove the special FTP command file after each test! unlink($FTPDCMD); my $e; for $e (@envs) { $ENV{$e}=""; # clean up } my @err = getpart("verify", "errorcode"); my $errorcode = $err[0]; if($errorcode || $res) { if($errorcode == $res) { $errorcode =~ s/\n//; if($verbose) { print " received errorcode $errorcode OK"; } elsif(!$short) { print " error OK"; } } else { if(!$short) { print "curl returned $res, ".(0+$errorcode)." was expected\n"; } print " error FAILED\n"; return 1; } } if (@validstdout) { # verify redirected stdout my @actual = loadarray($STDOUT); $res = compare("stdout", \@actual, \@validstdout); if($res) { return 1; } if(!$short) { print " stdout OK"; } } my %replyattr = getpartattr("reply", "data"); if(!$replyattr{'nocheck'} && @reply) { # verify the received data my @out = loadarray($CURLOUT); $res = compare("data", \@out, \@reply); if ($res) { return 1; } if(!$short) { print " data OK"; } } if(@upload) { # verify uploaded data my @out = loadarray("$LOGDIR/upload.$testnum"); $res = compare("upload", \@out, \@upload); if ($res) { return 1; } if(!$short) { print " upload OK"; } } if(@protocol) { # verify the sent request my @out = loadarray($SERVERIN); # what to cut off from the live protocol sent by curl my @strip = getpart("verify", "strip"); my @protstrip=@protocol; # check if there's any attributes on the verify/protocol section my %hash = getpartattr("verify", "protocol"); if($hash{'nonewline'}) { # Yes, we must cut off the final newline from the final line # of the protocol data chomp($protstrip[$#protstrip]); } for(@strip) { # strip all patterns from both arrays @out = striparray( $_, \@out); @protstrip= striparray( $_, \@protstrip); } $res = compare("protocol", \@out, \@protstrip); if($res) { return 1; } if(!$short) { print " protocol OK"; } } my @outfile=getpart("verify", "file"); if(@outfile) { # we're supposed to verify a dynamicly generated file! my %hash = getpartattr("verify", "file"); my $filename=$hash{'name'}; if(!$filename) { print "ERROR: section verify=>file has no name attribute!\n"; exit; } my @generated=loadarray($filename); $res = compare("output", \@generated, \@outfile); if($res) { return 1; } if(!$short) { print " output OK"; } } if(!$keepoutfiles) { # remove the stdout and stderr files unlink($STDOUT); unlink($STDERR); unlink($CURLOUT); # remove the downloaded results unlink("$LOGDIR/upload.$testnum"); # remove upload leftovers } unlink($FTPDCMD); # remove the instructions for this test @what = getpart("client", "killserver"); for(@what) { my $serv = $_; chomp $serv; if($run{$serv}) { stopserver($run{$serv}); # the pid file is in the hash table $run{$serv}=0; # clear pid } else { print STDERR "RUN: The $serv server is not running\n"; } } if($curl_debug) { if(! -f $memdump) { print "\n** ALERT! memory debuggin without any output file?\n"; } else { my @memdata=`$memanalyze $memdump`; my $leak=0; for(@memdata) { if($_ ne "") { # well it could be other memory problems as well, but # we call it leak for short here $leak=1; } } if($leak) { print "\n** MEMORY FAILURE\n"; print @memdata; return 1; } else { if(!$short) { print " memory OK"; } } } } if($short) { print "OK"; } print "\n"; return 0; } ####################################################################### # Stop all running test servers sub stopservers { print "Shutting down test suite servers:\n" if ($verbose); for(keys %run) { printf ("* kill pid for %-5s => %-5d\n", $_, $run{$_}) if($verbose); stopserver($run{$_}); # the pid file is in the hash table } } ####################################################################### # startservers() starts all the named servers # sub startservers { my @what = @_; my $pid; for(@what) { my $what = lc($_); $what =~ s/[^a-z]//g; if($what eq "ftp") { if(!$run{'ftp'}) { $pid = runftpserver($verbose); if($pid <= 0) { return 2; # error starting it } printf ("* pid ftp => %-5d\n", $pid) if($verbose); $run{'ftp'}=$pid; } } elsif($what eq "http") { if(!$run{'http'}) { $pid = runhttpserver($verbose); if($pid <= 0) { return 2; # error starting } printf ("* pid http => %-5d\n", $pid) if($verbose); $run{'http'}=$pid; } } elsif($what eq "ftps") { if(!$checkstunnel || !$ssl_version) { # we can't run https tests without stunnel # or if libcurl is SSL-less return 1; } if(!$run{'ftp'}) { $pid = runftpserver($verbose); if($pid <= 0) { return 2; # error starting it } $run{'ftp'}=$pid; } if(!$run{'ftps'}) { $pid = runftpsserver($verbose); if($pid <= 0) { return 2; } printf ("* pid ftps => %-5d\n", $pid) if($verbose); $run{'ftps'}=$pid; } } elsif($what eq "file") { # we support it but have no server! } elsif($what eq "https") { if(!$checkstunnel || !$ssl_version) { # we can't run https tests without stunnel # or if libcurl is SSL-less return 1; } if(!$run{'http'}) { $pid = runhttpserver($verbose); if($pid <= 0) { return 2; # problems starting server } $run{'http'}=$pid; } if(!$run{'https'}) { $pid = runhttpsserver($verbose); if($pid <= 0) { return 2; } printf ("* pid https => %-5d\n", $pid) if($verbose); $run{'https'}=$pid; } } elsif($what eq "none") { } else { warn "we don't support a server for $what"; } } return 0; } ############################################################################## # This function makes sure the right set of server is running for the # specified test case. This is a useful design when we run single tests as not # all servers need to run then! # # Returns: # 100 if this is not a test case # 99 if this test case has no servers specified # 2 if one of the required servers couldn't be started # 1 if this test is skipped due to unfulfilled SSL/stunnel-requirements sub serverfortest { my ($testnum)=@_; # load the test case file definition if(loadtest("${TESTDIR}/test${testnum}")) { if($verbose) { # this is not a test print "$testnum doesn't look like a test case!\n"; } return 100; } my @what = getpart("client", "server"); if(!$what[0]) { warn "Test case $testnum has no server(s) specified!"; return 99; } return &startservers(@what); } ####################################################################### # Check options to this test program # my $number=0; my $fromnum=-1; my @testthis; do { if ($ARGV[0] eq "-v") { # verbose output $verbose=1; } elsif ($ARGV[0] eq "-c") { # use this path to curl instead of default $CURL=$ARGV[1]; shift @ARGV; } elsif ($ARGV[0] eq "-d") { # have the servers display protocol output $debugprotocol=1; } elsif ($ARGV[0] eq "-g") { # run this test with gdb $gdbthis=1; } elsif($ARGV[0] eq "-s") { # short output $short=1; } elsif($ARGV[0] =~ /^-t(.*)/) { # torture $torture=1; my $xtra = $1; if($xtra =~ s/^(\d+)//) { $tortnum = $1; } if($xtra =~ s/(\d+)$//) { $tortalloc = $1; } } elsif($ARGV[0] eq "-a") { # continue anyway, even if a test fail $anyway=1; } elsif($ARGV[0] eq "-l") { # lists the test case names only $listonly=1; } elsif($ARGV[0] eq "-k") { # keep stdout and stderr files after tests $keepoutfiles=1; } elsif($ARGV[0] eq "-h") { # show help text print <= 0) { for($fromnum .. $number) { push @testthis, $_; } $fromnum = -1; } else { push @testthis, $1; } } elsif($ARGV[0] =~ /^to$/i) { $fromnum = $number+1; } } while(shift @ARGV); if($testthis[0] ne "") { $TESTCASES=join(" ", @testthis); } ####################################################################### # Output curl version and host info being tested # if(!$listonly) { checkcurl(); } ####################################################################### # clear and create logging directory: # cleardir($LOGDIR); mkdir($LOGDIR, 0777); ####################################################################### # If 'all' tests are requested, find out all test numbers # if ( $TESTCASES eq "all") { # Get all commands and find out their test numbers opendir(DIR, $TESTDIR) || die "can't opendir $TESTDIR: $!"; my @cmds = grep { /^test([0-9]+)$/ && -f "$TESTDIR/$_" } readdir(DIR); closedir DIR; $TESTCASES=""; # start with no test cases # cut off everything but the digits for(@cmds) { $_ =~ s/[a-z\/\.]*//g; } # the the numbers from low to high for(sort { $a <=> $b } @cmds) { $TESTCASES .= " $_"; } } ####################################################################### # Start the command line log # open(CMDLOG, ">$CURLLOG") || print "can't log command lines to $CURLLOG\n"; ####################################################################### # Torture the memory allocation system and checks # if($torture) { &torture(); } ####################################################################### # The main test-loop # my $failed; my $testnum; my $ok=0; my $total=0; my $lasttest; foreach $testnum (split(" ", $TESTCASES)) { $lasttest = $testnum if($testnum > $lasttest); my $error = singletest($testnum); if($error < 0) { # not a test we can run next; } $total++; # number of tests we've run if($error>0) { $failed.= "$testnum "; if(!$anyway) { # a test failed, abort print "\n - abort tests\n"; last; } } elsif(!$error) { $ok++; # successful test counter } # loop for next test } ####################################################################### # Close command log # close(CMDLOG); # Tests done, stop the servers stopservers(); my $all = $total + $skipped; if($total) { printf("TESTDONE: $ok tests out of $total reported OK: %d%%\n", $ok/$total*100); if($ok != $total) { print "TESTFAIL: These test cases failed: $failed\n"; } } else { print "TESTFAIL: No tests were performed!\n"; } if($all) { print "TESTDONE: $all tests were considered.\n"; } if($skipped) { my $s=0; print "TESTINFO: $skipped tests were skipped due to these restraints:\n"; for(keys %skipped) { my $r = $_; printf "TESTINFO: \"%s\" %d times (", $r, $skipped{$_}; # now show all test case numbers that had this reason for being # skipped my $c=0; for(0 .. $lasttest) { my $t = $_; if($teststat[$_] eq $r) { print ", " if($c); print $_; $c++; } } print ")\n"; } } if($total && ($ok != $total)) { exit 1; }