#!/usr/bin/env perl #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) 1998 - 2005, Daniel Stenberg, <daniel@haxx.se>, et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at http://curl.haxx.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # $Id$ ########################################################################### ########################### # What is This Script? ########################### # testcurl.pl is the master script to use for automatic testing of CVS-curl. # This is written for the purpose of being run from a crontab job or similar # at a regular interval. The output is suitable to be mailed to # curl-autocompile@haxx.se to be dealt with automatically (make sure the # subject includes the word "autobuild" as the mail gets silently discarded # otherwise). The most current build status (with a resonable backlog) will # be published on the curl site, at http://curl.haxx.se/auto/ # USAGE: # testcurl.pl [options] [curl-daily-name] > output # Options: # # --configure=[options] Configure options # --crosscompile This is a crosscompile # --desc=[desc] Description of your test system # --email=[email] Set email address to report as # --mktarball=[command] Command to run after completed test # --name=[name] Set name to report as # --nocvsup Don't update from CVS even though it is a CVS tree # --nobuildconf Don't run buildconf # --runtestopts=[options] Options to pass to runtests.pl # --setup=[file name] File name to read setup from (deprecated) # --target=[your os] Specify your target environment. # # if [curl-daily-name] is omitted, a 'curl' CVS directory is assumed. # use strict; use Cwd; # Turn on warnings (equivalent to -w, which can't be used with /usr/bin/env) #BEGIN { $^W = 1; } use vars qw($version $fixed $infixed $CURLDIR $CVS $pwd $build $buildlog $buildlogname $configurebuild $targetos $confsuffix $binext $libext); use vars qw($name $email $desc $confopts $runtestopts $setupfile $mktarball $nocvsup $nobuildconf $crosscompile); # version of this script $version='$Revision$'; $fixed=0; # Determine if we're running from CVS or a canned copy of curl, # or if we got a specific target option or setup file option. $CURLDIR="curl"; $CVS=1; $setupfile = 'setup'; while ($ARGV[0]) { if ($ARGV[0] =~ /--target=/) { $targetos = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--setup=/) { $setupfile = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--mktarball=/) { $mktarball = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--name=/) { $name = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--email=/) { $email = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--desc=/) { $desc = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--configure=/) { $confopts = (split(/=/, shift @ARGV))[1]; } elsif ($ARGV[0] =~ /--nocvsup/) { $nocvsup=1; shift @ARGV; } elsif ($ARGV[0] =~ /--nobuildconf/) { $nobuildconf=1; shift @ARGV; } elsif ($ARGV[0] =~ /--crosscompile/) { $crosscompile=1; shift @ARGV; } elsif ($ARGV[0] =~ /--runtestopts=/) { $runtestopts = (split(/=/, shift @ARGV, 2))[1]; } else { $CURLDIR=shift @ARGV; $CVS=0; } } # Do the platform-specific stuff here $configurebuild = 1; $confsuffix = ''; $binext = ''; $libext = '.la'; # .la since both libcurl and libcares are made with libtool if ($^O eq 'MSWin32' || $targetos) { if (!$targetos) { # If no target defined on Win32 lets assume vc $targetos = 'vc'; } if ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/) { $binext = '.exe'; $libext = '.lib' if ($targetos =~ /vc/ || $targetos =~ /borland/); $libext = '.a' if ($targetos =~ /mingw32/); } elsif ($targetos =~ /netware/) { $configurebuild = 0; $binext = '.nlm'; $libext = '.lib'; } } if ($^O eq 'MSWin32') { # Set these things only when building ON Windows, not when simply building # FOR Windows since we might be cross-compiling on another system. Non- # Windows builds still default to configure-style builds with no confsuffix. $configurebuild = 0; $confsuffix = '-win32'; } $ENV{LANG}="C"; sub rmtree($) { my $target = $_[0]; if ($^O eq 'MSWin32') { foreach (glob($target)) { s:/:\\:g; system("rd /s /q $_"); } } else { system("rm -rf $target"); } } sub grepfile($$) { my ($target, $fn) = @_; open(F, $fn) or die; while (<F>) { if (/$target/) { close(F); return 1; } } close(F); return 0; } sub logit($) { my $text=$_[0]; if ($text) { print "testcurl: $text\n"; } } sub mydie($){ my $text=$_[0]; logit "$text"; chdir $pwd; # cd back to the original root dir if ($pwd && $build) { # we have a build directory name, remove the dir logit "removing the $build dir"; rmtree "$pwd/$build"; } if (-r $buildlog) { # we have a build log output file left, remove it logit "removing the $buildlogname file"; unlink "$buildlog"; } logit "ENDING HERE"; # last line logged! exit 1; } if (open(F, "$setupfile")) { while (<F>) { if (/(\w+)=(.*)/) { eval "\$$1=$2;"; } } close(F); $infixed=$fixed; } else { $infixed=0; # so that "additional args to configure" works properly first time... } if (!$name) { print "please enter your name\n"; $name = <>; chomp $name; $fixed=1; } if (!$email) { print "please enter your contact email address\n"; $email = <>; chomp $email; $fixed=2; } if (!$desc) { print "please enter a one line system description\n"; $desc = <>; chomp $desc; $fixed=3; } if (!$confopts) { if ($infixed < 4) { print "please enter your additional arguments to configure\n"; print "examples: --with-ssl --enable-debug --enable-ipv6 --with-krb4\n"; $confopts = <>; chomp $confopts; } } if ($fixed < 4) { $fixed=4; open(F, ">$setupfile") or die; print F "name='$name'\n"; print F "email='$email'\n"; print F "desc='$desc'\n"; print F "confopts='$confopts'\n"; print F "fixed='$fixed'\n"; close(F); } logit "STARTING HERE"; # first line logged, for scripts to trigger on logit "NAME = $name"; logit "EMAIL = $email"; logit "DESC = $desc"; logit "CONFOPTS = $confopts"; logit "CFLAGS = ".$ENV{CFLAGS}; logit "LDFLAGS = ".$ENV{LDFLAGS}; logit "CC = ".$ENV{CC}; logit "target = ".$targetos; logit "version = $version"; # script version logit "date = ".(scalar gmtime)." UTC"; # Make $pwd to become the path without newline. We'll use that in order to cut # off that path from all possible logs and error messages etc. $pwd = cwd(); if (-d $CURLDIR) { if ($CVS && -d "$CURLDIR/CVS") { logit "$CURLDIR is verified to be a fine source dir"; # remove the generated sources to force them to be re-generated each # time we run this test unlink "$CURLDIR/src/hugehelp.c"; } elsif (!$CVS && -f "$CURLDIR/tests/testcurl.pl") { logit "$CURLDIR is verified to be a fine daily source dir" } else { mydie "$CURLDIR is not a daily source dir or checked out from CVS!" } } $build="build-$$"; $buildlogname="buildlog-$$"; $buildlog="$pwd/$buildlogname"; # remove any previous left-overs rmtree "build-*"; rmtree "buildlog-*"; # this is to remove old build logs that ended up in the wrong dir foreach (glob("$CURLDIR/buildlog-*")) { unlink $_; } # create a dir to build in mkdir $build, 0777; if (-d $build) { logit "build dir $build was created fine"; } else { mydie "failed to create dir $build"; } # get in the curl source tree root chdir $CURLDIR; # Do the CVS thing, or not... if ($CVS) { # this is a temporary fix to make things work again, remove later logit "remove ares/aclocal.m4"; unlink "ares/aclocal.m4"; logit "update from CVS"; my $cvsstat; sub cvsup() { # update quietly to the latest CVS logit "run cvs up"; if($nocvsup) { logit "Skipping CVS update (--nocvsup)"; return 1; } else { system("cvs -Q up -dP 2>&1"); } $cvsstat=$?; # return !RETURNVALUE so that errors return 0 while goodness # returns 1 return !$cvsstat; } my $att=0; while (!cvsup()) { $att++; logit "failed CVS update attempt number $att."; if ($att > 10) { $cvsstat=111; last; # get out of the loop } sleep 5; } if ($cvsstat != 0) { mydie "failed to update from CVS ($cvsstat), exiting"; } if($nobuildconf) { logit "told to not run buildconf"; } elsif ($configurebuild) { # remove possible left-overs from the past unlink "configure"; unlink "autom4te.cache"; # generate the build files logit "invoke buildconf, but filter off the silly aclocal warnings"; open(F, "./buildconf 2>&1 |") or die; open(LOG, ">$buildlog") or die; while (<F>) { next if /warning: underquoted definition of/; print; print LOG; } close(F); close(LOG); if (grepfile("^buildconf: OK", $buildlog)) { logit "buildconf was successful"; } else { mydie "buildconf was NOT successful"; } if($confopts =~ /--enable-ares/) { logit "run buildconf for ares"; chdir "ares"; open(F, "./buildconf 2>&1 |") or die; open(LOG, ">$buildlog") or die; while (<F>) { next if /warning: underquoted definition of/; print; print LOG; } close(F); close(LOG); chdir ".."; } } else { logit "buildconf was successful (dummy message)"; } } if ($configurebuild) { if (-f "configure") { logit "configure created (at least it exists)"; } else { mydie "no configure created/found"; } } else { logit "configure created (dummy message)"; # dummy message to feign success } sub findinpath { my $c; my $e; my $p=$ENV{'PATH'}; my @pa = split(":", $p); for $c (@_) { for $e (@pa) { if( -x "$e/$c") { return $c; } } } } my $make = findinpath("gmake", "make", "nmake"); if(!$make) { mydie "Couldn't find make in the PATH"; } logit "going with $make as make"; # change to build dir chdir "$pwd/$build"; if ($configurebuild) { # run configure script print `../$CURLDIR/configure $confopts 2>&1`; if (-f "lib/Makefile") { logit "configure seems to have finished fine"; } else { mydie "configure didn't work"; } } else { if (($^O eq 'MSWin32') && ($targetos !~ /netware/)) { system("xcopy /s /q ..\\$CURLDIR ."); system("buildconf.bat"); } elsif (($^O eq 'linux') || ($targetos =~ /netware/)) { system("cp -afr ../$CURLDIR/* ."); system("cp -af ../$CURLDIR/Makefile.dist Makefile"); system("$make -i -C lib -f Makefile.$targetos prebuild"); system("$make -i -C src -f Makefile.$targetos prebuild"); } } logit "display lib/config$confsuffix.h"; open(F, "lib/config$confsuffix.h") or die "lib/config$confsuffix.h: $!"; while (<F>) { print if /^ *#/; } close(F); if (grepfile("define USE_ARES", "lib/config$confsuffix.h")) { logit "setup to build ares"; logit "display ares/config$confsuffix.h"; if(open(F, "ares/config$confsuffix.h")) { while (<F>) { print if /^ *#/; } close(F); } logit "build ares"; chdir "ares"; if ($targetos && !$configurebuild) { logit "$make -f Makefile.$targetos"; open(F, "$make -f Makefile.$targetos 2>&1 |") or die; } else { logit "$make"; open(F, "$make 2>&1 |") or die; } while (<F>) { s/$pwd//g; print; } close(F); if (-f "libcares$libext") { logit "ares is now built successfully (libcares$libext)"; } else { logit "ares build failed (libares$libext)"; } # cd back to the curl build dir chdir "$pwd/$build"; } if ($configurebuild) { logit "$make -i"; open(F, "$make -i 2>&1 |") or die; while (<F>) { s/$pwd//g; print; } close(F); } else { logit "$make -i $targetos"; if ($^O eq 'MSWin32') { if ($targetos =~ /vc/) { open(F, "nmake -i $targetos|") or die; } else { open(F, "$make -i $targetos |") or die; } } else { open(F, "$make -i $targetos 2>&1 |") or die; } while (<F>) { s/$pwd//g; print; } close(F); } if (-f "lib/libcurl$libext") { logit "lib/libcurl was created fine (libcurl$libext)"; } else { logit "lib/libcurl was not created (libcurl$libext)"; } if (-f "src/curl$binext") { logit "src/curl was created fine (curl$binext)"; } else { mydie "src/curl was not created (curl$binext)"; } if ($targetos =~ /netware/) { if (-f '../../curlver') { system('../../curlver'); } } elsif(!$crosscompile) { logit "display curl$binext --version output"; open(F, "./src/curl$binext --version|"); while(<F>) { print; print LOG; } close(F); } if ($configurebuild && !$crosscompile) { my $o; if($runtestopts) { $o = "TEST_F=\"$runtestopts\" "; } logit "$make ${o}test-full"; open(F, "$make ${o}test-full 2>&1 |") or die; open(LOG, ">$buildlog") or die; while (<F>) { s/$pwd//g; print; print LOG; } close(F); close(LOG); if (grepfile("^TEST", $buildlog)) { logit "tests were run"; } else { mydie "test suite failure"; } if (grepfile("^TESTFAIL:", $buildlog)) { logit "the tests were not successful"; } else { logit "the tests were successful!"; } } else { # dummy message to feign success if($crosscompile) { logit "cross-compiling, can't run tests"; } print "TESTDONE: 1 tests out of 0 (dummy message)\n"; } # create a tarball if we got that option. if (($mktarball ne '') && (-f $mktarball)) { system($mktarball); } # mydie to cleanup mydie "ending nicely";