diff options
Diffstat (limited to 'templates')
33 files changed, 4258 insertions, 0 deletions
diff --git a/templates/.bin/_docker b/templates/.bin/_docker new file mode 100755 index 0000000..4b0c1e2 --- /dev/null +++ b/templates/.bin/_docker @@ -0,0 +1,3014 @@ +#compdef docker dockerd +# +# zsh completion for docker (http://docker.com) +# +# version: 0.3.0 +# github: https://github.com/felixr/docker-zsh-completion +# +# contributors: +# - Felix Riedel +# - Steve Durrheimer +# - Vincent Bernat +# +# license: +# +# Copyright (c) 2013, Felix Riedel +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of the <organization> nor the +# names of its contributors may be used to endorse or promote products +# derived from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# + +# Short-option stacking can be enabled with: +# zstyle ':completion:*:*:docker:*' option-stacking yes +# zstyle ':completion:*:*:docker-*:*' option-stacking yes +__docker_arguments() { + if zstyle -t ":completion:${curcontext}:" option-stacking; then + print -- -s + fi +} + +__docker_get_containers() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local kind type line s + declare -a running stopped lines args names + + kind=$1; shift + type=$1; shift + [[ $kind = (stopped|all) ]] && args=($args -a) + + lines=(${(f)${:-"$(_call_program commands docker $docker_options ps --format 'table' --no-trunc $args)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 # Last column, should go to the end of the line + lines=(${lines[2,-1]}) + + # Container ID + if [[ $type = (ids|all) ]]; then + for line in $lines; do + s="${${line[${begin[CONTAINER ID]},${end[CONTAINER ID]}]%% ##}[0,12]}" + s="$s:${(l:15:: :::)${${line[${begin[CREATED]},${end[CREATED]}]/ ago/}%% ##}}" + s="$s, ${${${line[${begin[IMAGE]},${end[IMAGE]}]}/:/\\:}%% ##}" + if [[ ${line[${begin[STATUS]},${end[STATUS]}]} = (Exit*|Created*) ]]; then + stopped=($stopped $s) + else + running=($running $s) + fi + done + fi + + # Names: we only display the one without slash. All other names + # are generated and may clutter the completion. However, with + # Swarm, all names may be prefixed by the swarm node name. + if [[ $type = (names|all) ]]; then + for line in $lines; do + names=(${(ps:,:)${${line[${begin[NAMES]},${end[NAMES]}]}%% *}}) + # First step: find a common prefix and strip it (swarm node case) + (( ${#${(u)names%%/*}} == 1 )) && names=${names#${names[1]%%/*}/} + # Second step: only keep the first name without a / + s=${${names:#*/*}[1]} + # If no name, well give up. + (( $#s != 0 )) || continue + s="$s:${(l:15:: :::)${${line[${begin[CREATED]},${end[CREATED]}]/ ago/}%% ##}}" + s="$s, ${${${line[${begin[IMAGE]},${end[IMAGE]}]}/:/\\:}%% ##}" + if [[ ${line[${begin[STATUS]},${end[STATUS]}]} = (Exit*|Created*) ]]; then + stopped=($stopped $s) + else + running=($running $s) + fi + done + fi + + [[ $kind = (running|all) ]] && _describe -t containers-running "running containers" running "$@" && ret=0 + [[ $kind = (stopped|all) ]] && _describe -t containers-stopped "stopped containers" stopped "$@" && ret=0 + return ret +} + +__docker_complete_stopped_containers() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_containers stopped all "$@" +} + +__docker_complete_running_containers() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_containers running all "$@" +} + +__docker_complete_containers() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_containers all all "$@" +} + +__docker_complete_containers_ids() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_containers all ids "$@" +} + +__docker_complete_containers_names() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_containers all names "$@" +} + +__docker_complete_info_plugins() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + emulate -L zsh + setopt extendedglob + local -a plugins + plugins=(${(ps: :)${(M)${(f)${${"$(_call_program commands docker $docker_options info)"##*$'\n'Plugins:}%%$'\n'^ *}}:# $1: *}## $1: }) + _describe -t plugins "$1 plugins" plugins && ret=0 + return ret +} + +__docker_complete_images() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a images + images=(${${${(f)${:-"$(_call_program commands docker $docker_options images)"$'\n'}}[2,-1]}/(#b)([^ ]##) ##([^ ]##) ##([^ ]##)*/${match[3]}:${(r:15:: :::)match[2]} in ${match[1]}}) + _describe -t docker-images "images" images && ret=0 + __docker_complete_repositories_with_tags && ret=0 + return ret +} + +__docker_complete_repositories() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a repos + repos=(${${${(f)${:-"$(_call_program commands docker $docker_options images)"$'\n'}}%% *}[2,-1]}) + repos=(${repos#<none>}) + _describe -t docker-repos "repositories" repos && ret=0 + return ret +} + +__docker_complete_repositories_with_tags() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a repos onlyrepos matched + declare m + repos=(${${${${(f)${:-"$(_call_program commands docker $docker_options images)"$'\n'}}[2,-1]}/ ##/:::}%% *}) + repos=(${${repos%:::<none>}#<none>}) + # Check if we have a prefix-match for the current prefix. + onlyrepos=(${repos%::*}) + for m in $onlyrepos; do + [[ ${PREFIX##${~~m}} != ${PREFIX} ]] && { + # Yes, complete with tags + repos=(${${repos/:::/:}/:/\\:}) + _describe -t docker-repos-with-tags "repositories with tags" repos && ret=0 + return ret + } + done + # No, only complete repositories + onlyrepos=(${${repos%:::*}/:/\\:}) + _describe -t docker-repos "repositories" onlyrepos -qS : && ret=0 + + return ret +} + +__docker_search() { + [[ $PREFIX = -* ]] && return 1 + local cache_policy + zstyle -s ":completion:${curcontext}:" cache-policy cache_policy + if [[ -z "$cache_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy __docker_caching_policy + fi + + local searchterm cachename + searchterm="${words[$CURRENT]%/}" + cachename=_docker-search-$searchterm + + local expl + local -a result + if ( [[ ${(P)+cachename} -eq 0 ]] || _cache_invalid ${cachename#_} ) \ + && ! _retrieve_cache ${cachename#_}; then + _message "Searching for ${searchterm}..." + result=(${${${(f)${:-"$(_call_program commands docker $docker_options search $searchterm)"$'\n'}}%% *}[2,-1]}) + _store_cache ${cachename#_} result + fi + _wanted dockersearch expl 'available images' compadd -a result +} + +__docker_get_log_options() { + [[ $PREFIX = -* ]] && return 1 + + integer ret=1 + local log_driver=${opt_args[--log-driver]:-"all"} + local -a common_options awslogs_options fluentd_options gelf_options journald_options json_file_options logentries_options syslog_options splunk_options + + common_options=("max-buffer-size" "mode") + awslogs_options=($common_options "awslogs-region" "awslogs-group" "awslogs-stream" "awslogs-create-group") + fluentd_options=($common_options "env" "fluentd-address" "fluentd-async-connect" "fluentd-buffer-limit" "fluentd-retry-wait" "fluentd-max-retries" "labels" "tag") + gcplogs_options=($common_options "env" "gcp-log-cmd" "gcp-project" "labels") + gelf_options=($common_options "env" "gelf-address" "gelf-compression-level" "gelf-compression-type" "labels" "tag") + journald_options=($common_options "env" "labels" "tag") + json_file_options=($common_options "env" "labels" "max-file" "max-size") + logentries_options=($common_options "logentries-token") + syslog_options=($common_options "env" "labels" "syslog-address" "syslog-facility" "syslog-format" "syslog-tls-ca-cert" "syslog-tls-cert" "syslog-tls-key" "syslog-tls-skip-verify" "tag") + splunk_options=($common_options "env" "labels" "splunk-caname" "splunk-capath" "splunk-format" "splunk-gzip" "splunk-gzip-level" "splunk-index" "splunk-insecureskipverify" "splunk-source" "splunk-sourcetype" "splunk-token" "splunk-url" "splunk-verify-connection" "tag") + + [[ $log_driver = (awslogs|all) ]] && _describe -t awslogs-options "awslogs options" awslogs_options "$@" && ret=0 + [[ $log_driver = (fluentd|all) ]] && _describe -t fluentd-options "fluentd options" fluentd_options "$@" && ret=0 + [[ $log_driver = (gcplogs|all) ]] && _describe -t gcplogs-options "gcplogs options" gcplogs_options "$@" && ret=0 + [[ $log_driver = (gelf|all) ]] && _describe -t gelf-options "gelf options" gelf_options "$@" && ret=0 + [[ $log_driver = (journald|all) ]] && _describe -t journald-options "journald options" journald_options "$@" && ret=0 + [[ $log_driver = (json-file|all) ]] && _describe -t json-file-options "json-file options" json_file_options "$@" && ret=0 + [[ $log_driver = (logentries|all) ]] && _describe -t logentries-options "logentries options" logentries_options "$@" && ret=0 + [[ $log_driver = (syslog|all) ]] && _describe -t syslog-options "syslog options" syslog_options "$@" && ret=0 + [[ $log_driver = (splunk|all) ]] && _describe -t splunk-options "splunk options" splunk_options "$@" && ret=0 + + return ret +} + +__docker_complete_log_drivers() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + drivers=(awslogs etwlogs fluentd gcplogs gelf journald json-file none splunk syslog) + _describe -t log-drivers "log drivers" drivers && ret=0 + return ret +} + +__docker_complete_log_options() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (syslog-format) + local opts=('rfc3164' 'rfc5424' 'rfc5424micro') + _describe -t syslog-format-opts "syslog format options" opts && ret=0 + ;; + (mode) + local opts=('blocking' 'non-blocking') + _describe -t mode-opts "mode options" opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + __docker_get_log_options -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_detach_keys() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + compset -P "*," + keys=(${:-{a-z}}) + ctrl_keys=(${:-ctrl-{{a-z},{@,'[','\\','^',']',_}}}) + _describe -t detach_keys "[a-z]" keys -qS "," && ret=0 + _describe -t detach_keys-ctrl "'ctrl-' + 'a-z @ [ \\\\ ] ^ _'" ctrl_keys -qS "," && ret=0 +} + +__docker_complete_pid() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local -a opts vopts + + opts=('host') + vopts=('container') + + if compset -P '*:'; then + case "${${words[-1]%:*}#*=}" in + (container) + __docker_complete_running_containers && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + _describe -t pid-value-opts "PID Options with value" vopts -qS ":" && ret=0 + _describe -t pid-opts "PID Options" opts && ret=0 + fi + + return ret +} + +__docker_complete_runtimes() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + emulate -L zsh + setopt extendedglob + local -a runtimes_opts + runtimes_opts=(${(ps: :)${(f)${${"$(_call_program commands docker $docker_options info)"##*$'\n'Runtimes: }%%$'\n'^ *}}}) + _describe -t runtimes-opts "runtimes options" runtimes_opts && ret=0 +} + +__docker_complete_ps_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (ancestor) + __docker_complete_images && ret=0 + ;; + (before|since) + __docker_complete_containers && ret=0 + ;; + (health) + health_opts=('healthy' 'none' 'starting' 'unhealthy') + _describe -t health-filter-opts "health filter options" health_opts && ret=0 + ;; + (id) + __docker_complete_containers_ids && ret=0 + ;; + (is-task) + _describe -t boolean-filter-opts "filter options" boolean_opts && ret=0 + ;; + (name) + __docker_complete_containers_names && ret=0 + ;; + (network) + __docker_complete_networks && ret=0 + ;; + (status) + status_opts=('created' 'dead' 'exited' 'paused' 'restarting' 'running' 'removing') + _describe -t status-filter-opts "status filter options" status_opts && ret=0 + ;; + (volume) + __docker_complete_volumes && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('ancestor' 'before' 'exited' 'expose' 'health' 'id' 'label' 'name' 'network' 'publish' 'since' 'status' 'volume') + _describe -t filter-opts "Filter Options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_search_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a boolean_opts opts + + boolean_opts=('true' 'false') + opts=('is-automated' 'is-official' 'stars') + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (is-automated|is-official) + _describe -t boolean-filter-opts "filter options" boolean_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_images_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a boolean_opts opts + + boolean_opts=('true' 'false') + opts=('before' 'dangling' 'label' 'reference' 'since') + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (before|reference|since) + __docker_complete_images && ret=0 + ;; + (dangling) + _describe -t boolean-filter-opts "filter options" boolean_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + _describe -t filter-opts "Filter Options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_events_filter() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a opts + + opts=('container' 'daemon' 'event' 'image' 'label' 'network' 'type' 'volume') + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (container) + __docker_complete_containers && ret=0 + ;; + (daemon) + emulate -L zsh + setopt extendedglob + local -a daemon_opts + daemon_opts=( + ${(f)${${"$(_call_program commands docker $docker_options info)"##*$'\n'Name: }%%$'\n'^ *}} + ${${(f)${${"$(_call_program commands docker $docker_options info)"##*$'\n'ID: }%%$'\n'^ *}}//:/\\:} + ) + _describe -t daemon-filter-opts "daemon filter options" daemon_opts && ret=0 + ;; + (event) + local -a event_opts + event_opts=('attach' 'commit' 'connect' 'copy' 'create' 'delete' 'destroy' 'detach' 'die' 'disconnect' 'exec_create' 'exec_detach' + 'exec_start' 'export' 'health_status' 'import' 'kill' 'load' 'mount' 'oom' 'pause' 'pull' 'push' 'reload' 'rename' 'resize' 'restart' 'save' 'start' + 'stop' 'tag' 'top' 'unmount' 'unpause' 'untag' 'update') + _describe -t event-filter-opts "event filter options" event_opts && ret=0 + ;; + (image) + __docker_complete_images && ret=0 + ;; + (network) + __docker_complete_networks && ret=0 + ;; + (type) + local -a type_opts + type_opts=('container' 'daemon' 'image' 'network' 'volume') + _describe -t type-filter-opts "type filter options" type_opts && ret=0 + ;; + (volume) + __docker_complete_volumes && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_prune_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a opts + + opts=('until') + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + *) + _message 'value' && ret=0 + ;; + esac + else + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +# BO checkpoint + +__docker_checkpoint_commands() { + local -a _docker_checkpoint_subcommands + _docker_checkpoint_subcommands=( + "create:Create a checkpoint from a running container" + "ls:List checkpoints for a container" + "rm:Remove a checkpoint" + ) + _describe -t docker-checkpoint-commands "docker checkpoint command" _docker_checkpoint_subcommands +} + +__docker_checkpoint_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (create) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--checkpoint-dir=[Use a custom checkpoint storage directory]:dir:_directories" \ + "($help)--leave-running[Leave the container running after checkpoint]" \ + "($help -)1:container:__docker_complete_running_containers" \ + "($help -)2:checkpoint: " && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--checkpoint-dir=[Use a custom checkpoint storage directory]:dir:_directories" \ + "($help -)1:container:__docker_complete_containers" && ret=0 + ;; + (rm|remove) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--checkpoint-dir=[Use a custom checkpoint storage directory]:dir:_directories" \ + "($help -)1:container:__docker_complete_containers" \ + "($help -)2:checkpoint: " && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_checkpoint_commands" && ret=0 + ;; + esac + + return ret +} + +# EO checkpoint + +# BO container + +__docker_container_commands() { + local -a _docker_container_subcommands + _docker_container_subcommands=( + "attach:Attach to a running container" + "commit:Create a new image from a container's changes" + "cp:Copy files/folders between a container and the local filesystem" + "create:Create a new container" + "diff:Inspect changes on a container's filesystem" + "exec:Run a command in a running container" + "export:Export a container's filesystem as a tar archive" + "inspect:Display detailed information on one or more containers" + "kill:Kill one or more running containers" + "logs:Fetch the logs of a container" + "ls:List containers" + "pause:Pause all processes within one or more containers" + "port:List port mappings or a specific mapping for the container" + "prune:Remove all stopped containers" + "rename:Rename a container" + "restart:Restart one or more containers" + "rm:Remove one or more containers" + "run:Run a command in a new container" + "start:Start one or more stopped containers" + "stats:Display a live stream of container(s) resource usage statistics" + "stop:Stop one or more running containers" + "top:Display the running processes of a container" + "unpause:Unpause all processes within one or more containers" + "update:Update configuration of one or more containers" + "wait:Block until one or more containers stop, then print their exit codes" + ) + _describe -t docker-container-commands "docker container command" _docker_container_subcommands +} + +__docker_container_subcommand() { + local -a _command_args opts_help opts_attach_exec_run_start opts_create_run opts_create_run_update + local expl help="--help" + integer ret=1 + + opts_attach_exec_run_start=( + "($help)--detach-keys=[Escape key sequence used to detach a container]:sequence:__docker_complete_detach_keys" + ) + opts_create_run=( + "($help -a --attach)"{-a=,--attach=}"[Attach to stdin, stdout or stderr]:device:(STDIN STDOUT STDERR)" + "($help)*--add-host=[Add a custom host-to-IP mapping]:host\:ip mapping: " + "($help)*--blkio-weight-device=[Block IO (relative device weight)]:device:Block IO weight: " + "($help)*--cap-add=[Add Linux capabilities]:capability: " + "($help)*--cap-drop=[Drop Linux capabilities]:capability: " + "($help)--cgroup-parent=[Parent cgroup for the container]:cgroup: " + "($help)--cidfile=[Write the container ID to the file]:CID file:_files" + "($help)--cpus=[Number of CPUs (default 0.000)]:cpus: " + "($help)*--device=[Add a host device to the container]:device:_files" + "($help)*--device-cgroup-rule=[Add a rule to the cgroup allowed devices list]:device:cgroup: " + "($help)*--device-read-bps=[Limit the read rate (bytes per second) from a device]:device:IO rate: " + "($help)*--device-read-iops=[Limit the read rate (IO per second) from a device]:device:IO rate: " + "($help)*--device-write-bps=[Limit the write rate (bytes per second) to a device]:device:IO rate: " + "($help)*--device-write-iops=[Limit the write rate (IO per second) to a device]:device:IO rate: " + "($help)--disable-content-trust[Skip image verification]" + "($help)*--dns=[Custom DNS servers]:DNS server: " + "($help)*--dns-option=[Custom DNS options]:DNS option: " + "($help)*--dns-search=[Custom DNS search domains]:DNS domains: " + "($help)*"{-e=,--env=}"[Environment variables]:environment variable: " + "($help)--entrypoint=[Overwrite the default entrypoint of the image]:entry point: " + "($help)*--env-file=[Read environment variables from a file]:environment file:_files" + "($help)*--expose=[Expose a port from the container without publishing it]: " + "($help)*--group=[Set one or more supplementary user groups for the container]:group:_groups" + "($help -h --hostname)"{-h=,--hostname=}"[Container host name]:hostname:_hosts" + "($help -i --interactive)"{-i,--interactive}"[Keep stdin open even if not attached]" + "($help)--init[Run an init inside the container that forwards signals and reaps processes]" + "($help)--ip=[IPv4 address]:IPv4: " + "($help)--ip6=[IPv6 address]:IPv6: " + "($help)--ipc=[IPC namespace to use]:IPC namespace: " + "($help)--isolation=[Container isolation technology]:isolation:(default hyperv process)" + "($help)*--link=[Add link to another container]:link:->link" + "($help)*--link-local-ip=[Container IPv4/IPv6 link-local addresses]:IPv4/IPv6: " + "($help)*"{-l=,--label=}"[Container metadata]:label: " + "($help)--log-driver=[Default driver for container logs]:logging driver:__docker_complete_log_drivers" + "($help)*--log-opt=[Log driver specific options]:log driver options:__docker_complete_log_options" + "($help)--mac-address=[Container MAC address]:MAC address: " + "($help)*--mount=[Attach a filesystem mount to the container]:mount: " + "($help)--name=[Container name]:name: " + "($help)--network=[Connect a container to a network]:network mode:(bridge none container host)" + "($help)*--network-alias=[Add network-scoped alias for the container]:alias: " + "($help)--oom-kill-disable[Disable OOM Killer]" + "($help)--oom-score-adj[Tune the host's OOM preferences for containers (accepts -1000 to 1000)]" + "($help)--pids-limit[Tune container pids limit (set -1 for unlimited)]" + "($help -P --publish-all)"{-P,--publish-all}"[Publish all exposed ports]" + "($help)*"{-p=,--publish=}"[Expose a container's port to the host]:port:_ports" + "($help)--pid=[PID namespace to use]:PID namespace:__docker_complete_pid" + "($help)--privileged[Give extended privileges to this container]" + "($help)--read-only[Mount the container's root filesystem as read only]" + "($help)*--security-opt=[Security options]:security option: " + "($help)*--shm-size=[Size of '/dev/shm' (format is '<number><unit>')]:shm size: " + "($help)--stop-signal=[Signal to kill a container]:signal:_signals" + "($help)--stop-timeout=[Timeout (in seconds) to stop a container]:time: " + "($help)*--sysctl=-[sysctl options]:sysctl: " + "($help -t --tty)"{-t,--tty}"[Allocate a pseudo-tty]" + "($help -u --user)"{-u=,--user=}"[Username or UID]:user:_users" + "($help)*--ulimit=[ulimit options]:ulimit: " + "($help)--userns=[Container user namespace]:user namespace:(host)" + "($help)--tmpfs[mount tmpfs]" + "($help)*-v[Bind mount a volume]:volume: " + "($help)--volume-driver=[Optional volume driver for the container]:volume driver:(local)" + "($help)*--volumes-from=[Mount volumes from the specified container]:volume: " + "($help -w --workdir)"{-w=,--workdir=}"[Working directory inside the container]:directory:_directories" + ) + opts_create_run_update=( + "($help)--blkio-weight=[Block IO (relative weight), between 10 and 1000]:Block IO weight:(10 100 500 1000)" + "($help -c --cpu-shares)"{-c=,--cpu-shares=}"[CPU shares (relative weight)]:CPU shares:(0 10 100 200 500 800 1000)" + "($help)--cpu-period=[Limit the CPU CFS (Completely Fair Scheduler) period]:CPU period: " + "($help)--cpu-quota=[Limit the CPU CFS (Completely Fair Scheduler) quota]:CPU quota: " + "($help)--cpu-rt-period=[Limit the CPU real-time period]:CPU real-time period in microseconds: " + "($help)--cpu-rt-runtime=[Limit the CPU real-time runtime]:CPU real-time runtime in microseconds: " + "($help)--cpuset-cpus=[CPUs in which to allow execution]:CPUs: " + "($help)--cpuset-mems=[MEMs in which to allow execution]:MEMs: " + "($help)--kernel-memory=[Kernel memory limit in bytes]:Memory limit: " + "($help -m --memory)"{-m=,--memory=}"[Memory limit]:Memory limit: " + "($help)--memory-reservation=[Memory soft limit]:Memory limit: " + "($help)--memory-swap=[Total memory limit with swap]:Memory limit: " + "($help)--restart=[Restart policy]:restart policy:(no on-failure always unless-stopped)" + ) + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (attach) + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_attach_exec_run_start \ + "($help)--no-stdin[Do not attach stdin]" \ + "($help)--sig-proxy[Proxy all received signals to the process (non-TTY mode only)]" \ + "($help -):containers:__docker_complete_running_containers" && ret=0 + ;; + (commit) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --author)"{-a=,--author=}"[Author]:author: " \ + "($help)*"{-c=,--change=}"[Apply Dockerfile instruction to the created image]:Dockerfile:_files" \ + "($help -m --message)"{-m=,--message=}"[Commit message]:message: " \ + "($help -p --pause)"{-p,--pause}"[Pause container during commit]" \ + "($help -):container:__docker_complete_containers" \ + "($help -): :__docker_complete_repositories_with_tags" && ret=0 + ;; + (cp) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -L --follow-link)"{-L,--follow-link}"[Always follow symbol link]" \ + "($help -)1:container:->container" \ + "($help -)2:hostpath:_files" && ret=0 + case $state in + (container) + if compset -P "*:"; then + _files && ret=0 + else + __docker_complete_containers -qS ":" && ret=0 + fi + ;; + esac + ;; + (create) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_create_run \ + $opts_create_run_update \ + "($help -): :__docker_complete_images" \ + "($help -):command: _command_names -e" \ + "($help -)*::arguments: _normal" && ret=0 + case $state in + (link) + if compset -P "*:"; then + _wanted alias expl "Alias" compadd -E "" && ret=0 + else + __docker_complete_running_containers -qS ":" && ret=0 + fi + ;; + esac + ;; + (diff) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:containers:__docker_complete_containers" && ret=0 + ;; + (exec) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_attach_exec_run_start \ + "($help -d --detach)"{-d,--detach}"[Detached mode: leave the container running in the background]" \ + "($help)*"{-e=,--env=}"[Set environment variables]:environment variable: " \ + "($help -i --interactive)"{-i,--interactive}"[Keep stdin open even if not attached]" \ + "($help)--privileged[Give extended Linux capabilities to the command]" \ + "($help -t --tty)"{-t,--tty}"[Allocate a pseudo-tty]" \ + "($help -u --user)"{-u=,--user=}"[Username or UID]:user:_users" \ + "($help -):containers:__docker_complete_running_containers" \ + "($help -)*::command:->anycommand" && ret=0 + case $state in + (anycommand) + shift 1 words + (( CURRENT-- )) + _normal && ret=0 + ;; + esac + ;; + (export) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -o --output)"{-o=,--output=}"[Write to a file, instead of stdout]:output file:_files" \ + "($help -)*:containers:__docker_complete_containers" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help -s --size)"{-s,--size}"[Display total file sizes]" \ + "($help -)*:containers:__docker_complete_containers" && ret=0 + ;; + (kill) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -s --signal)"{-s=,--signal=}"[Signal to send]:signal:_signals" \ + "($help -)*:containers:__docker_complete_running_containers" && ret=0 + ;; + (logs) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--details[Show extra details provided to logs]" \ + "($help -f --follow)"{-f,--follow}"[Follow log output]" \ + "($help -s --since)"{-s=,--since=}"[Show logs since this timestamp]:timestamp: " \ + "($help -t --timestamps)"{-t,--timestamps}"[Show timestamps]" \ + "($help)--tail=[Output the last K lines]:lines:(1 10 20 50 all)" \ + "($help -)*:containers:__docker_complete_containers" && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Show all containers]" \ + "($help)--before=[Show only container created before...]:containers:__docker_complete_containers" \ + "($help)*"{-f=,--filter=}"[Filter values]:filter:__docker_complete_ps_filters" \ + "($help)--format=[Pretty-print containers using a Go template]:template: " \ + "($help -l --latest)"{-l,--latest}"[Show only the latest created container]" \ + "($help -n --last)"{-n=,--last=}"[Show n last created containers (includes all states)]:n:(1 5 10 25 50)" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only show numeric IDs]" \ + "($help -s --size)"{-s,--size}"[Display total file sizes]" \ + "($help)--since=[Show only containers created since...]:containers:__docker_complete_containers" && ret=0 + ;; + (pause|unpause) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:containers:__docker_complete_running_containers" && ret=0 + ;; + (port) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)1:containers:__docker_complete_running_containers" \ + "($help -)2:port:_ports" && ret=0 + ;; + (prune) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*--filter=[Filter values]:filter:__docker_complete_prune_filters" \ + "($help -f --force)"{-f,--force}"[Do not prompt for confirmation]" && ret=0 + ;; + (rename) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -):old name:__docker_complete_containers" \ + "($help -):new name: " && ret=0 + ;; + (restart) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -t --time)"{-t=,--time=}"[Number of seconds to try to stop for before killing the container]:seconds to before killing:(1 5 10 30 60)" \ + "($help -)*:containers:__docker_complete_containers_ids" && ret=0 + ;; + (rm) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force removal]" \ + "($help -l --link)"{-l,--link}"[Remove the specified link and not the underlying container]" \ + "($help -v --volumes)"{-v,--volumes}"[Remove the volumes associated to the container]" \ + "($help -)*:containers:->values" && ret=0 + case $state in + (values) + if [[ ${words[(r)-f]} == -f || ${words[(r)--force]} == --force ]]; then + __docker_complete_containers && ret=0 + else + __docker_complete_stopped_containers && ret=0 + fi + ;; + esac + ;; + (run) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_create_run \ + $opts_create_run_update \ + $opts_attach_exec_run_start \ + "($help -d --detach)"{-d,--detach}"[Detached mode: leave the container running in the background]" \ + "($help)--health-cmd=[Command to run to check health]:command: " \ + "($help)--health-interval=[Time between running the check]:time: " \ + "($help)--health-retries=[Consecutive failures needed to report unhealthy]:retries:(1 2 3 4 5)" \ + "($help)--health-timeout=[Maximum time to allow one check to run]:time: " \ + "($help)--no-healthcheck[Disable any container-specified HEALTHCHECK]" \ + "($help)--rm[Remove intermediate containers when it exits]" \ + "($help)--runtime=[Name of the runtime to be used for that container]:runtime:__docker_complete_runtimes" \ + "($help)--sig-proxy[Proxy all received signals to the process (non-TTY mode only)]" \ + "($help)--storage-opt=[Storage driver options for the container]:storage options:->storage-opt" \ + "($help -): :__docker_complete_images" \ + "($help -):command: _command_names -e" \ + "($help -)*::arguments: _normal" && ret=0 + case $state in + (link) + if compset -P "*:"; then + _wanted alias expl "Alias" compadd -E "" && ret=0 + else + __docker_complete_running_containers -qS ":" && ret=0 + fi + ;; + (storage-opt) + if compset -P "*="; then + _message "value" && ret=0 + else + opts=('size') + _describe -t filter-opts "storage options" opts -qS "=" && ret=0 + fi + ;; + esac + ;; + (start) + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_attach_exec_run_start \ + "($help -a --attach)"{-a,--attach}"[Attach container's stdout/stderr and forward all signals]" \ + "($help -i --interactive)"{-i,--interactive}"[Attach container's stding]" \ + "($help -)*:containers:__docker_complete_stopped_containers" && ret=0 + ;; + (stats) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Show all containers (default shows just running)]" \ + "($help)--format=[Pretty-print images using a Go template]:template: " \ + "($help)--no-stream[Disable streaming stats and only pull the first result]" \ + "($help -)*:containers:__docker_complete_running_containers" && ret=0 + ;; + (stop) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -t --time)"{-t=,--time=}"[Number of seconds to try to stop for before killing the container]:seconds to before killing:(1 5 10 30 60)" \ + "($help -)*:containers:__docker_complete_running_containers" && ret=0 + ;; + (top) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)1:containers:__docker_complete_running_containers" \ + "($help -)*:: :->ps-arguments" && ret=0 + case $state in + (ps-arguments) + _ps && ret=0 + ;; + esac + ;; + (update) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + opts_create_run_update \ + "($help -)*: :->values" && ret=0 + case $state in + (values) + if [[ ${words[(r)--kernel-memory*]} = (--kernel-memory*) ]]; then + __docker_complete_stopped_containers && ret=0 + else + __docker_complete_containers && ret=0 + fi + ;; + esac + ;; + (wait) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:containers:__docker_complete_running_containers" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_container_commands" && ret=0 + ;; + esac + + return ret +} + +# EO container + +# BO image + +__docker_image_commands() { + local -a _docker_image_subcommands + _docker_image_subcommands=( + "build:Build an image from a Dockerfile" + "history:Show the history of an image" + "import:Import the contents from a tarball to create a filesystem image" + "inspect:Display detailed information on one or more images" + "load:Load an image from a tar archive or STDIN" + "ls:List images" + "prune:Remove unused images" + "pull:Pull an image or a repository from a registry" + "push:Push an image or a repository to a registry" + "rm:Remove one or more images" + "save:Save one or more images to a tar archive (streamed to STDOUT by default)" + "tag:Tag an image into a repository" + ) + _describe -t docker-image-commands "docker image command" _docker_image_subcommands +} + +__docker_image_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (build) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*--add-host=[Add a custom host-to-IP mapping]:host\:ip mapping: " \ + "($help)*--build-arg=[Build-time variables]:<varname>=<value>: " \ + "($help)*--cache-from=[Images to consider as cache sources]: :__docker_complete_repositories_with_tags" \ + "($help -c --cpu-shares)"{-c=,--cpu-shares=}"[CPU shares (relative weight)]:CPU shares:(0 10 100 200 500 800 1000)" \ + "($help)--cgroup-parent=[Parent cgroup for the container]:cgroup: " \ + "($help)--compress[Compress the build context using gzip]" \ + "($help)--cpu-period=[Limit the CPU CFS (Completely Fair Scheduler) period]:CPU period: " \ + "($help)--cpu-quota=[Limit the CPU CFS (Completely Fair Scheduler) quota]:CPU quota: " \ + "($help)--cpu-rt-period=[Limit the CPU real-time period]:CPU real-time period in microseconds: " \ + "($help)--cpu-rt-runtime=[Limit the CPU real-time runtime]:CPU real-time runtime in microseconds: " \ + "($help)--cpuset-cpus=[CPUs in which to allow execution]:CPUs: " \ + "($help)--cpuset-mems=[MEMs in which to allow execution]:MEMs: " \ + "($help)--disable-content-trust[Skip image verification]" \ + "($help -f --file)"{-f=,--file=}"[Name of the Dockerfile]:Dockerfile:_files" \ + "($help)--force-rm[Always remove intermediate containers]" \ + "($help)--isolation=[Container isolation technology]:isolation:(default hyperv process)" \ + "($help)*--label=[Set metadata for an image]:label=value: " \ + "($help -m --memory)"{-m=,--memory=}"[Memory limit]:Memory limit: " \ + "($help)--memory-swap=[Total memory limit with swap]:Memory limit: " \ + "($help)--network=[Connect a container to a network]:network mode:(bridge none container host)" \ + "($help)--no-cache[Do not use cache when building the image]" \ + "($help)--pull[Attempt to pull a newer version of the image]" \ + "($help -q --quiet)"{-q,--quiet}"[Suppress verbose build output]" \ + "($help)--rm[Remove intermediate containers after a successful build]" \ + "($help)*--shm-size=[Size of '/dev/shm' (format is '<number><unit>')]:shm size: " \ + "($help)--squash[Squash newly built layers into a single new layer]" \ + "($help -t --tag)*"{-t=,--tag=}"[Repository, name and tag for the image]: :__docker_complete_repositories_with_tags" \ + "($help)*--ulimit=[ulimit options]:ulimit: " \ + "($help)--userns=[Container user namespace]:user namespace:(host)" \ + "($help -):path or URL:_directories" && ret=0 + ;; + (history) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -H --human)"{-H,--human}"[Print sizes and dates in human readable format]" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only show numeric IDs]" \ + "($help -)*: :__docker_complete_images" && ret=0 + ;; + (import) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-c=,--change=}"[Apply Dockerfile instruction to the created image]:Dockerfile:_files" \ + "($help -m --message)"{-m=,--message=}"[Commit message for imported image]:message: " \ + "($help -):URL:(- http:// file://)" \ + "($help -): :__docker_complete_repositories_with_tags" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help -)*:images:__docker_complete_images" && ret=0 + ;; + (load) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -i --input)"{-i=,--input=}"[Read from tar archive file]:archive file:_files -g \"*.((tar|TAR)(.gz|.GZ|.Z|.bz2|.lzma|.xz|)|(tbz|tgz|txz))(-.)\"" \ + "($help -q --quiet)"{-q,--quiet}"[Suppress the load output]" && ret=0 + ;; + (ls|list) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Show all images]" \ + "($help)--digests[Show digests]" \ + "($help)*"{-f=,--filter=}"[Filter values]:filter:__docker_complete_images_filters" \ + "($help)--format=[Pretty-print images using a Go template]:template: " \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only show numeric IDs]" \ + "($help -): :__docker_complete_repositories" && ret=0 + ;; + (prune) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Remove all unused images, not just dangling ones]" \ + "($help)*--filter=[Filter values]:filter:__docker_complete_prune_filters" \ + "($help -f --force)"{-f,--force}"[Do not prompt for confirmation]" && ret=0 + ;; + (pull) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all-tags)"{-a,--all-tags}"[Download all tagged images]" \ + "($help)--disable-content-trust[Skip image verification]" \ + "($help -):name:__docker_search" && ret=0 + ;; + (push) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--disable-content-trust[Skip image signing]" \ + "($help -): :__docker_complete_images" && ret=0 + ;; + (rm) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force removal]" \ + "($help)--no-prune[Do not delete untagged parents]" \ + "($help -)*: :__docker_complete_images" && ret=0 + ;; + (save) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -o --output)"{-o=,--output=}"[Write to file]:file:_files" \ + "($help -)*: :__docker_complete_images" && ret=0 + ;; + (tag) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -):source:__docker_complete_images"\ + "($help -):destination:__docker_complete_repositories_with_tags" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_container_commands" && ret=0 + ;; + esac + + return ret +} + +# EO image + +# BO network + +__docker_network_complete_ls_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (driver) + __docker_complete_info_plugins Network && ret=0 + ;; + (id) + __docker_complete_networks_ids && ret=0 + ;; + (name) + __docker_complete_networks_names && ret=0 + ;; + (scope) + opts=('global' 'local' 'swarm') + _describe -t scope-filter-opts "Scope filter options" opts && ret=0 + ;; + (type) + opts=('builtin' 'custom') + _describe -t type-filter-opts "Type filter options" opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('driver' 'id' 'label' 'name' 'scope' 'type') + _describe -t filter-opts "Filter Options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_get_networks() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines networks + + type=$1; shift + + lines=(${(f)${:-"$(_call_program commands docker $docker_options network ls)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Network ID + if [[ $type = (ids|all) ]]; then + for line in $lines; do + s="${line[${begin[NETWORK ID]},${end[NETWORK ID]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[DRIVER]},${end[DRIVER]}]}%% ##}}" + s="$s, ${${line[${begin[SCOPE]},${end[SCOPE]}]}%% ##}" + networks=($networks $s) + done + fi + + # Names + if [[ $type = (names|all) ]]; then + for line in $lines; do + s="${line[${begin[NAME]},${end[NAME]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[DRIVER]},${end[DRIVER]}]}%% ##}}" + s="$s, ${${line[${begin[SCOPE]},${end[SCOPE]}]}%% ##}" + networks=($networks $s) + done + fi + + _describe -t networks-list "networks" networks "$@" && ret=0 + return ret +} + +__docker_complete_networks() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_networks all "$@" +} + +__docker_complete_networks_ids() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_networks ids "$@" +} + +__docker_complete_networks_names() { + [[ $PREFIX = -* ]] && return 1 + __docker_get_networks names "$@" +} + +__docker_network_commands() { + local -a _docker_network_subcommands + _docker_network_subcommands=( + "connect:Connect a container to a network" + "create:Creates a new network with a name specified by the user" + "disconnect:Disconnects a container from a network" + "inspect:Displays detailed information on a network" + "ls:Lists all the networks created by the user" + "prune:Remove all unused networks" + "rm:Deletes one or more networks" + ) + _describe -t docker-network-commands "docker network command" _docker_network_subcommands +} + +__docker_network_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (connect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*--alias=[Add network-scoped alias for the container]:alias: " \ + "($help)--ip=[IPv4 address]:IPv4: " \ + "($help)--ip6=[IPv6 address]:IPv6: " \ + "($help)*--link=[Add a link to another container]:link:->link" \ + "($help)*--link-local-ip=[Add a link-local address for the container]:IPv4/IPv6: " \ + "($help -)1:network:__docker_complete_networks" \ + "($help -)2:containers:__docker_complete_containers" && ret=0 + + case $state in + (link) + if compset -P "*:"; then + _wanted alias expl "Alias" compadd -E "" && ret=0 + else + __docker_complete_running_containers -qS ":" && ret=0 + fi + ;; + esac + ;; + (create) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help)--attachable[Enable manual container attachment]" \ + "($help)*--aux-address[Auxiliary IPv4 or IPv6 addresses used by network driver]:key=IP: " \ + "($help -d --driver)"{-d=,--driver=}"[Driver to manage the Network]:driver:(null host bridge overlay)" \ + "($help)*--gateway=[IPv4 or IPv6 Gateway for the master subnet]:IP: " \ + "($help)--internal[Restricts external access to the network]" \ + "($help)*--ip-range=[Allocate container ip from a sub-range]:IP/mask: " \ + "($help)--ipam-driver=[IP Address Management Driver]:driver:(default)" \ + "($help)*--ipam-opt=[Custom IPAM plugin options]:opt=value: " \ + "($help)--ipv6[Enable IPv6 networking]" \ + "($help)*--label=[Set metadata on a network]:label=value: " \ + "($help)*"{-o=,--opt=}"[Driver specific options]:opt=value: " \ + "($help)*--subnet=[Subnet in CIDR format that represents a network segment]:IP/mask: " \ + "($help -)1:Network Name: " && ret=0 + ;; + (disconnect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)1:network:__docker_complete_networks" \ + "($help -)2:containers:__docker_complete_containers" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help)--verbose[Show detailed information]" \ + "($help -)*:network:__docker_complete_networks" && ret=0 + ;; + (ls) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--no-trunc[Do not truncate the output]" \ + "($help)*"{-f=,--filter=}"[Provide filter values]:filter:__docker_network_complete_ls_filters" \ + "($help)--format=[Pretty-print networks using a Go template]:template: " \ + "($help -q --quiet)"{-q,--quiet}"[Only display numeric IDs]" && ret=0 + ;; + (prune) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*--filter=[Filter values]:filter:__docker_complete_prune_filters" \ + "($help -f --force)"{-f,--force}"[Do not prompt for confirmation]" && ret=0 + ;; + (rm) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:network:__docker_complete_networks" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_network_commands" && ret=0 + ;; + esac + + return ret +} + +# EO network + +# BO node + +__docker_node_complete_ls_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (id) + __docker_complete_nodes_ids && ret=0 + ;; + (membership) + membership_opts=('accepted' 'pending' 'rejected') + _describe -t membership-opts "membership options" membership_opts && ret=0 + ;; + (name) + __docker_complete_nodes_names && ret=0 + ;; + (role) + role_opts=('manager' 'worker') + _describe -t role-opts "role options" role_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('id' 'label' 'membership' 'name' 'role') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_node_complete_ps_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (desired-state) + state_opts=('accepted' 'running' 'shutdown') + _describe -t state-opts "desired state options" state_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('desired-state' 'id' 'label' 'name') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_nodes() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines nodes args + + type=$1; shift + filter=$1; shift + [[ $filter != "none" ]] && args=("-f $filter") + + lines=(${(f)${:-"$(_call_program commands docker $docker_options node ls $args)"$'\n'}}) + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Node ID + if [[ $type = (ids|all) ]]; then + for line in $lines; do + s="${line[${begin[ID]},${end[ID]}]%% ##}" + nodes=($nodes $s) + done + fi + + # Names + if [[ $type = (names|all) ]]; then + for line in $lines; do + s="${line[${begin[NAME]},${end[NAME]}]%% ##}" + nodes=($nodes $s) + done + fi + + _describe -t nodes-list "nodes" nodes "$@" && ret=0 + return ret +} + +__docker_complete_nodes() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes all none "$@" +} + +__docker_complete_nodes_ids() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes ids none "$@" +} + +__docker_complete_nodes_names() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes names none "$@" +} + +__docker_complete_pending_nodes() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes all "membership=pending" "$@" +} + +__docker_complete_manager_nodes() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes all "role=manager" "$@" +} + +__docker_complete_worker_nodes() { + [[ $PREFIX = -* ]] && return 1 + __docker_nodes all "role=worker" "$@" +} + +__docker_node_commands() { + local -a _docker_node_subcommands + _docker_node_subcommands=( + "demote:Demote a node as manager in the swarm" + "inspect:Display detailed information on one or more nodes" + "ls:List nodes in the swarm" + "promote:Promote a node as manager in the swarm" + "rm:Remove one or more nodes from the swarm" + "ps:List tasks running on one or more nodes, defaults to current node" + "update:Update a node" + ) + _describe -t docker-node-commands "docker node command" _docker_node_subcommands +} + +__docker_node_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (rm|remove) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force remove a node from the swarm]" \ + "($help -)*:node:__docker_complete_pending_nodes" && ret=0 + ;; + (demote) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:node:__docker_complete_manager_nodes" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help)--pretty[Print the information in a human friendly format]" \ + "($help -)*:node:__docker_complete_nodes" && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Provide filter values]:filter:__docker_node_complete_ls_filters" \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" && ret=0 + ;; + (promote) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:node:__docker_complete_worker_nodes" && ret=0 + ;; + (ps) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Display all instances]" \ + "($help)*"{-f=,--filter=}"[Provide filter values]:filter:__docker_node_complete_ps_filters" \ + "($help)--format=[Format the output using the given go template]:template: " \ + "($help)--no-resolve[Do not map IDs to Names]" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" \ + "($help -)*:node:__docker_complete_nodes" && ret=0 + ;; + (update) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--availability=[Availability of the node]:availability:(active pause drain)" \ + "($help)*--label-add=[Add or update a node label]:key=value: " \ + "($help)*--label-rm=[Remove a node label if exists]:label: " \ + "($help)--role=[Role of the node]:role:(manager worker)" \ + "($help -)1:node:__docker_complete_nodes" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_node_commands" && ret=0 + ;; + esac + + return ret +} + +# EO node + +# BO plugin + +__docker_plugin_complete_ls_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (capability) + opts=('authz' 'ipamdriver' 'networkdriver' 'volumedriver') + _describe -t capability-opts "capability options" opts && ret=0 + ;; + (enabled) + opts=('false' 'true') + _describe -t enabled-opts "enabled options" opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('capability' 'enabled') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_plugins() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines plugins args + + filter=$1; shift + [[ $filter != "none" ]] && args=("-f $filter") + + lines=(${(f)${:-"$(_call_program commands docker $docker_options plugin ls $args)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Name + for line in $lines; do + s="${line[${begin[NAME]},${end[NAME]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[TAG]},${end[TAG]}]}%% ##}}" + plugins=($plugins $s) + done + + _describe -t plugins-list "plugins" plugins "$@" && ret=0 + return ret +} + +__docker_complete_plugins() { + [[ $PREFIX = -* ]] && return 1 + __docker_plugins none "$@" +} + +__docker_complete_enabled_plugins() { + [[ $PREFIX = -* ]] && return 1 + __docker_plugins enabled=true "$@" +} + +__docker_complete_disabled_plugins() { + [[ $PREFIX = -* ]] && return 1 + __docker_plugins enabled=false "$@" +} + +__docker_plugin_commands() { + local -a _docker_plugin_subcommands + _docker_plugin_subcommands=( + "disable:Disable a plugin" + "enable:Enable a plugin" + "inspect:Return low-level information about a plugin" + "install:Install a plugin" + "ls:List plugins" + "push:Push a plugin" + "rm:Remove a plugin" + "set:Change settings for a plugin" + "upgrade:Upgrade an existing plugin" + ) + _describe -t docker-plugin-commands "docker plugin command" _docker_plugin_subcommands +} + +__docker_plugin_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (disable) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force the disable of an active plugin]" \ + "($help -)1:plugin:__docker_complete_enabled_plugins" && ret=0 + ;; + (enable) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--timeout=[HTTP client timeout (in seconds)]:timeout: " \ + "($help -)1:plugin:__docker_complete_disabled_plugins" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given Go template]:template: " \ + "($help -)*:plugin:__docker_complete_plugins" && ret=0 + ;; + (install) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--alias=[Local name for plugin]:alias: " \ + "($help)--disable[Do not enable the plugin on install]" \ + "($help)--disable-content-trust[Skip image verification (default true)]" \ + "($help)--grant-all-permissions[Grant all permissions necessary to run the plugin]" \ + "($help -)1:plugin:__docker_complete_plugins" \ + "($help -)*:key=value: " && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Filter output based on conditions provided]:filter:__docker_plugin_complete_ls_filters" \ + "($help --format)--format=[Format the output using the given Go template]:template: " \ + "($help)--no-trunc[Don't truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" && ret=0 + ;; + (push) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--disable-content-trust[Skip image verification (default true)]" \ + "($help -)1:plugin:__docker_complete_plugins" && ret=0 + ;; + (rm|remove) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force the removal of an active plugin]" \ + "($help -)*:plugin:__docker_complete_plugins" && ret=0 + ;; + (set) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)1:plugin:__docker_complete_plugins" \ + "($help -)*:key=value: " && ret=0 + ;; + (upgrade) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--disable-content-trust[Skip image verification (default true)]" \ + "($help)--grant-all-permissions[Grant all permissions necessary to run the plugin]" \ + "($help)--skip-remote-check[Do not check if specified remote plugin matches existing plugin image]" \ + "($help -)1:plugin:__docker_complete_plugins" \ + "($help -):remote: " && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_plugin_commands" && ret=0 + ;; + esac + + return ret +} + +# EO plugin + +# BO secret + +__docker_secrets() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines secrets + + type=$1; shift + + lines=(${(f)${:-"$(_call_program commands docker $docker_options secret ls)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # ID + if [[ $type = (ids|all) ]]; then + for line in $lines; do + s="${line[${begin[ID]},${end[ID]}]%% ##}" + secrets=($secrets $s) + done + fi + + # Names + if [[ $type = (names|all) ]]; then + for line in $lines; do + s="${line[${begin[NAME]},${end[NAME]}]%% ##}" + secrets=($secrets $s) + done + fi + + _describe -t secrets-list "secrets" secrets "$@" && ret=0 + return ret +} + +__docker_complete_secrets() { + [[ $PREFIX = -* ]] && return 1 + __docker_secrets all "$@" +} + +__docker_secret_commands() { + local -a _docker_secret_subcommands + _docker_secret_subcommands=( + "create:Create a secret using stdin as content" + "inspect:Display detailed information on one or more secrets" + "ls:List secrets" + "rm:Remove one or more secrets" + ) + _describe -t docker-secret-commands "docker secret command" _docker_secret_subcommands +} + +__docker_secret_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (create) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help)*"{-l=,--label=}"[Secret labels]:label: " \ + "($help -):secret: " && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given Go template]:template: " \ + "($help -)*:secret:__docker_complete_secrets" && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--format=[Format the output using the given go template]:template: " \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" && ret=0 + ;; + (rm|remove) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:secret:__docker_complete_secrets" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_secret_commands" && ret=0 + ;; + esac + + return ret +} + +# EO secret + +# BO service + +__docker_service_complete_ls_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (id) + __docker_complete_services_ids && ret=0 + ;; + (mode) + opts=('global' 'replicated') + _describe -t mode-opts "mode options" opts && ret=0 + ;; + (name) + __docker_complete_services_names && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('id' 'label' 'mode' 'name') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_service_complete_ps_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (desired-state) + state_opts=('accepted' 'running' 'shutdown') + _describe -t state-opts "desired state options" state_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('desired-state' 'id' 'label' 'name') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_service_complete_placement_pref() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (spread) + opts=('engine.labels' 'node.labels') + _describe -t spread-opts "spread options" opts -qS "." && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('spread') + _describe -t pref-opts "placement pref options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_services() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines services + + type=$1; shift + + lines=(${(f)${:-"$(_call_program commands docker $docker_options service ls)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Service ID + if [[ $type = (ids|all) ]]; then + for line in $lines; do + s="${line[${begin[ID]},${end[ID]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[IMAGE]},${end[IMAGE]}]}%% ##}}" + services=($services $s) + done + fi + + # Names + if [[ $type = (names|all) ]]; then + for line in $lines; do + s="${line[${begin[NAME]},${end[NAME]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[IMAGE]},${end[IMAGE]}]}%% ##}}" + services=($services $s) + done + fi + + _describe -t services-list "services" services "$@" && ret=0 + return ret +} + +__docker_complete_services() { + [[ $PREFIX = -* ]] && return 1 + __docker_services all "$@" +} + +__docker_complete_services_ids() { + [[ $PREFIX = -* ]] && return 1 + __docker_services ids "$@" +} + +__docker_complete_services_names() { + [[ $PREFIX = -* ]] && return 1 + __docker_services names "$@" +} + +__docker_service_commands() { + local -a _docker_service_subcommands + _docker_service_subcommands=( + "create:Create a new service" + "inspect:Display detailed information on one or more services" + "logs:Fetch the logs of a service or task" + "ls:List services" + "rm:Remove one or more services" + "scale:Scale one or multiple replicated services" + "ps:List the tasks of a service" + "update:Update a service" + ) + _describe -t docker-service-commands "docker service command" _docker_service_subcommands +} + +__docker_service_subcommand() { + local -a _command_args opts_help opts_create_update + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + opts_create_update=( + "($help)*--constraint=[Placement constraints]:constraint: " + "($help)--endpoint-mode=[Placement constraints]:mode:(dnsrr vip)" + "($help)*"{-e=,--env=}"[Set environment variables]:env: " + "($help)--health-cmd=[Command to run to check health]:command: " + "($help)--health-interval=[Time between running the check]:time: " + "($help)--health-retries=[Consecutive failures needed to report unhealthy]:retries:(1 2 3 4 5)" + "($help)--health-timeout=[Maximum time to allow one check to run]:time: " + "($help)--hostname=[Service container hostname]:hostname: " \ + "($help)*--label=[Service labels]:label: " + "($help)--limit-cpu=[Limit CPUs]:value: " + "($help)--limit-memory=[Limit Memory]:value: " + "($help)--log-driver=[Logging driver for service]:logging driver:__docker_complete_log_drivers" + "($help)*--log-opt=[Logging driver options]:log driver options:__docker_complete_log_options" + "($help)*--mount=[Attach a filesystem mount to the service]:mount: " + "($help)*--network=[Network attachments]:network: " + "($help)--no-healthcheck[Disable any container-specified HEALTHCHECK]" + "($help)*"{-p=,--publish=}"[Publish a port as a node port]:port: " + "($help)--read-only[Mount the container's root filesystem as read only]" + "($help)--replicas=[Number of tasks]:replicas: " + "($help)--reserve-cpu=[Reserve CPUs]:value: " + "($help)--reserve-memory=[Reserve Memory]:value: " + "($help)--restart-condition=[Restart when condition is met]:mode:(any none on-failure)" + "($help)--restart-delay=[Delay between restart attempts]:delay: " + "($help)--restart-max-attempts=[Maximum number of restarts before giving up]:max-attempts: " + "($help)--restart-window=[Window used to evaluate the restart policy]:duration: " + "($help)--rollback-delay=[Delay between task rollbacks]:duration: " + "($help)--rollback-failure-action=[Action on rollback failure]:action:(continue pause)" + "($help)--rollback-max-failure-ratio=[Failure rate to tolerate during a rollback]:failure rate: " + "($help)--rollback-monitor=[Duration after each task rollback to monitor for failure]:duration: " + "($help)--rollback-parallelism=[Maximum number of tasks rolled back simultaneously]:number: " + "($help)*--secret=[Specify secrets to expose to the service]:secret:__docker_complete_secrets" + "($help)--stop-grace-period=[Time to wait before force killing a container]:grace period: " + "($help)--stop-signal=[Signal to stop the container]:signal:_signals" + "($help -t --tty)"{-t,--tty}"[Allocate a pseudo-TTY]" + "($help)--update-delay=[Delay between updates]:delay: " + "($help)--update-failure-action=[Action on update failure]:mode:(continue pause rollback)" + "($help)--update-max-failure-ratio=[Failure rate to tolerate during an update]:fraction: " + "($help)--update-monitor=[Duration after each task update to monitor for failure]:window: " + "($help)--update-parallelism=[Maximum number of tasks updated simultaneously]:number: " + "($help -u --user)"{-u=,--user=}"[Username or UID]:user:_users" + "($help)--with-registry-auth[Send registry authentication details to swarm agents]" + "($help -w --workdir)"{-w=,--workdir=}"[Working directory inside the container]:directory:_directories" + ) + + case "$words[1]" in + (create) + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_create_update \ + "($help)*--container-label=[Container labels]:label: " \ + "($help)*--dns=[Set custom DNS servers]:DNS: " \ + "($help)*--dns-option=[Set DNS options]:DNS option: " \ + "($help)*--dns-search=[Set custom DNS search domains]:DNS search: " \ + "($help)*--env-file=[Read environment variables from a file]:environment file:_files" \ + "($help)--mode=[Service Mode]:mode:(global replicated)" \ + "($help)--name=[Service name]:name: " \ + "($help)*--placement-pref=[Add a placement preference]:pref:__docker_service_complete_placement_pref" \ + "($help)*--publish=[Publish a port]:port: " \ + "($help -): :__docker_complete_images" \ + "($help -):command: _command_names -e" \ + "($help -)*::arguments: _normal" && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help)--pretty[Print the information in a human friendly format]" \ + "($help -)*:service:__docker_complete_services" && ret=0 + ;; + (logs) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --follow)"{-f,--follow}"[Follow log output]" \ + "($help)--no-resolve[Do not map IDs to Names]" \ + "($help)--no-task-ids[Do not include task IDs]" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help)--since=[Show logs since timestamp]:timestamp: " \ + "($help)--tail=[Number of lines to show from the end of the logs]:lines:(1 10 20 50 all)" \ + "($help -t --timestamps)"{-t,--timestamps}"[Show timestamps]" \ + "($help -)1:service:__docker_complete_services" && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Filter output based on conditions provided]:filter:__docker_service_complete_ls_filters" \ + "($help)--format=[Pretty-print services using a Go template]:template: " \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" && ret=0 + ;; + (rm|remove) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:service:__docker_complete_services" && ret=0 + ;; + (scale) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -)*:service:->values" && ret=0 + case $state in + (values) + if compset -P '*='; then + _message 'replicas' && ret=0 + else + __docker_complete_services -qS "=" + fi + ;; + esac + ;; + (ps) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Provide filter values]:filter:__docker_service_complete_ps_filters" \ + "($help)--format=[Format the output using the given go template]:template: " \ + "($help)--no-resolve[Do not map IDs to Names]" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only display task IDs]" \ + "($help -)*:service:__docker_complete_services" && ret=0 + ;; + (update) + _arguments $(__docker_arguments) \ + $opts_help \ + $opts_create_update \ + "($help)--arg=[Service command args]:arguments: _normal" \ + "($help)*--container-label-add=[Add or update container labels]:label: " \ + "($help)*--container-label-rm=[Remove a container label by its key]:label: " \ + "($help)*--dns-add=[Add or update custom DNS servers]:DNS: " \ + "($help)*--dns-rm=[Remove custom DNS servers]:DNS: " \ + "($help)*--dns-option-add=[Add or update DNS options]:DNS option: " \ + "($help)*--dns-option-rm=[Remove DNS options]:DNS option: " \ + "($help)*--dns-search-add=[Add or update custom DNS search domains]:DNS search: " \ + "($help)*--dns-search-rm=[Remove DNS search domains]:DNS search: " \ + "($help)--force[Force update]" \ + "($help)*--group-add=[Add additional supplementary user groups to the container]:group:_groups" \ + "($help)*--group-rm=[Remove previously added supplementary user groups from the container]:group:_groups" \ + "($help)--image=[Service image tag]:image:__docker_complete_repositories" \ + "($help)*--placement-pref-add=[Add a placement preference]:pref:__docker_service_complete_placement_pref" \ + "($help)*--placement-pref-rm=[Remove a placement preference]:pref:__docker_service_complete_placement_pref" \ + "($help)*--publish-add=[Add or update a port]:port: " \ + "($help)*--publish-rm=[Remove a port(target-port mandatory)]:port: " \ + "($help)--rollback[Rollback to previous specification]" \ + "($help -)1:service:__docker_complete_services" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_service_commands" && ret=0 + ;; + esac + + return ret +} + +# EO service + +# BO stack + +__docker_stack_complete_ps_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (desired-state) + state_opts=('accepted' 'running' 'shutdown') + _describe -t state-opts "desired state options" state_opts && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('desired-state' 'id' 'name') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_stack_complete_services_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('id' 'label' 'name') + _describe -t filter-opts "filter options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_stacks() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local line s + declare -a lines stacks + + lines=(${(f)${:-"$(_call_program commands docker $docker_options stack ls)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Service ID + for line in $lines; do + s="${line[${begin[ID]},${end[ID]}]%% ##}" + stacks=($stacks $s) + done + + _describe -t stacks-list "stacks" stacks "$@" && ret=0 + return ret +} + +__docker_complete_stacks() { + [[ $PREFIX = -* ]] && return 1 + __docker_stacks "$@" +} + +__docker_stack_commands() { + local -a _docker_stack_subcommands + _docker_stack_subcommands=( + "deploy:Deploy a new stack or update an existing stack" + "ls:List stacks" + "ps:List the tasks in the stack" + "rm:Remove the stack" + "services:List the services in the stack" + ) + _describe -t docker-stack-commands "docker stack command" _docker_stack_subcommands +} + +__docker_stack_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (deploy|up) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--bundle-file=[Path to a Distributed Application Bundle file]:dab:_files -g \"*.dab\"" \ + "($help -c --compose-file)"{-c=,--compose-file=}"[Path to a Compose file]:compose file:_files -g \"*.(yml|yaml)\"" \ + "($help)--with-registry-auth[Send registry authentication details to Swarm agents]" \ + "($help -):stack:__docker_complete_stacks" && ret=0 + ;; + (ls|list) + _arguments $(__docker_arguments) \ + $opts_help && ret=0 + ;; + (ps) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Display all tasks]" \ + "($help)*"{-f=,--filter=}"[Filter output based on conditions provided]:filter:__docker_stack_complete_ps_filters" \ + "($help)--format=[Format the output using the given go template]:template: " \ + "($help)--no-resolve[Do not map IDs to Names]" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -q --quiet)"{-q,--quiet}"[Only display task IDs]" \ + "($help -):stack:__docker_complete_stacks" && ret=0 + ;; + (rm|remove|down) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -):stack:__docker_complete_stacks" && ret=0 + ;; + (services) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Filter output based on conditions provided]:filter:__docker_stack_complete_services_filters" \ + "($help)--format=[Pretty-print services using a Go template]:template: " \ + "($help -q --quiet)"{-q,--quiet}"[Only display IDs]" \ + "($help -):stack:__docker_complete_stacks" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_stack_commands" && ret=0 + ;; + esac + + return ret +} + +# EO stack + +# BO swarm + +__docker_swarm_commands() { + local -a _docker_swarm_subcommands + _docker_swarm_subcommands=( + "init:Initialize a swarm" + "join:Join a swarm as a node and/or manager" + "join-token:Manage join tokens" + "leave:Leave a swarm" + "unlock:Unlock swarm" + "unlock-key:Manage the unlock key" + "update:Update the swarm" + ) + _describe -t docker-swarm-commands "docker swarm command" _docker_swarm_subcommands +} + +__docker_swarm_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (init) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--advertise-addr=[Advertised address]:ip\:port: " \ + "($help)--data-path-addr=[Data path IP or interface]:ip " \ + "($help)--autolock[Enable manager autolocking]" \ + "($help)--availability=[Availability of the node]:availability:(active drain pause)" \ + "($help)--cert-expiry=[Validity period for node certificates]:duration: " \ + "($help)--dispatcher-heartbeat=[Dispatcher heartbeat period]:duration: " \ + "($help)*--external-ca=[Specifications of one or more certificate signing endpoints]:endpoint: " \ + "($help)--force-new-cluster[Force create a new cluster from current state]" \ + "($help)--listen-addr=[Listen address]:ip\:port: " \ + "($help)--max-snapshots[Number of additional Raft snapshots to retain]" \ + "($help)--snapshot-interval[Number of log entries between Raft snapshots]" \ + "($help)--task-history-limit=[Task history retention limit]:limit: " && ret=0 + ;; + (join) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help)--advertise-addr=[Advertised address]:ip\:port: " \ + "($help)--data-path-addr=[Data path IP or interface]:ip " \ + "($help)--availability=[Availability of the node]:availability:(active drain pause)" \ + "($help)--listen-addr=[Listen address]:ip\:port: " \ + "($help)--token=[Token for entry into the swarm]:secret: " \ + "($help -):host\:port: " && ret=0 + ;; + (join-token) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -q --quiet)"{-q,--quiet}"[Only display token]" \ + "($help)--rotate[Rotate join token]" \ + "($help -):role:(manager worker)" && ret=0 + ;; + (leave) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force this node to leave the swarm, ignoring warnings]" && ret=0 + ;; + (unlock) + _arguments $(__docker_arguments) \ + $opts_help && ret=0 + ;; + (unlock-key) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -q --quiet)"{-q,--quiet}"[Only display token]" \ + "($help)--rotate[Rotate unlock token]" && ret=0 + ;; + (update) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)--autolock[Enable manager autolocking]" \ + "($help)--cert-expiry=[Validity period for node certificates]:duration: " \ + "($help)--dispatcher-heartbeat=[Dispatcher heartbeat period]:duration: " \ + "($help)*--external-ca=[Specifications of one or more certificate signing endpoints]:endpoint: " \ + "($help)--max-snapshots[Number of additional Raft snapshots to retain]" \ + "($help)--snapshot-interval[Number of log entries between Raft snapshots]" \ + "($help)--task-history-limit=[Task history retention limit]:limit: " && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_network_commands" && ret=0 + ;; + esac + + return ret +} + +# EO swarm + +# BO system + +__docker_system_commands() { + local -a _docker_system_subcommands + _docker_system_subcommands=( + "df:Show docker filesystem usage" + "events:Get real time events from the server" + "info:Display system-wide information" + "prune:Remove unused data" + ) + _describe -t docker-system-commands "docker system command" _docker_system_subcommands +} + +__docker_system_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (df) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -v --verbose)"{-v,--verbose}"[Show detailed information on space usage]" && ret=0 + ;; + (events) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Filter values]:filter:__docker_complete_events_filter" \ + "($help)--since=[Events created since this timestamp]:timestamp: " \ + "($help)--until=[Events created until this timestamp]:timestamp: " \ + "($help)--format=[Format the output using the given go template]:template: " && ret=0 + ;; + (info) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " && ret=0 + ;; + (prune) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -a --all)"{-a,--all}"[Remove all unused data, not just dangling ones]" \ + "($help)*--filter=[Filter values]:filter:__docker_complete_prune_filters" \ + "($help -f --force)"{-f,--force}"[Do not prompt for confirmation]" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_volume_commands" && ret=0 + ;; + esac + + return ret +} + +# EO system + +# BO volume + +__docker_volume_complete_ls_filters() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + + if compset -P '*='; then + case "${${words[-1]%=*}#*=}" in + (dangling) + dangling_opts=('true' 'false') + _describe -t dangling-filter-opts "Dangling Filter Options" dangling_opts && ret=0 + ;; + (driver) + __docker_complete_info_plugins Volume && ret=0 + ;; + (name) + __docker_complete_volumes && ret=0 + ;; + *) + _message 'value' && ret=0 + ;; + esac + else + opts=('dangling' 'driver' 'label' 'name') + _describe -t filter-opts "Filter Options" opts -qS "=" && ret=0 + fi + + return ret +} + +__docker_complete_volumes() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + declare -a lines volumes + + lines=(${(f)${:-"$(_call_program commands docker $docker_options volume ls)"$'\n'}}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + end[${header[$i,$((j-1))]}]=-1 + lines=(${lines[2,-1]}) + + # Names + local line s + for line in $lines; do + s="${line[${begin[VOLUME NAME]},${end[VOLUME NAME]}]%% ##}" + s="$s:${(l:7:: :::)${${line[${begin[DRIVER]},${end[DRIVER]}]}%% ##}}" + volumes=($volumes $s) + done + + _describe -t volumes-list "volumes" volumes && ret=0 + return ret +} + +__docker_volume_commands() { + local -a _docker_volume_subcommands + _docker_volume_subcommands=( + "create:Create a volume" + "inspect:Display detailed information on one or more volumes" + "ls:List volumes" + "prune:Remove all unused volumes" + "rm:Remove one or more volumes" + ) + _describe -t docker-volume-commands "docker volume command" _docker_volume_subcommands +} + +__docker_volume_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (create) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help -d --driver)"{-d=,--driver=}"[Volume driver name]:Driver name:(local)" \ + "($help)*--label=[Set metadata for a volume]:label=value: " \ + "($help)*"{-o=,--opt=}"[Driver specific options]:Driver option: " \ + "($help -)1:Volume name: " && ret=0 + ;; + (inspect) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help -)1:volume:__docker_complete_volumes" && ret=0 + ;; + (ls) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Provide filter values]:filter:__docker_volume_complete_ls_filters" \ + "($help)--format=[Pretty-print volumes using a Go template]:template: " \ + "($help -q --quiet)"{-q,--quiet}"[Only display volume names]" && ret=0 + ;; + (prune) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Do not prompt for confirmation]" && ret=0 + ;; + (rm) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --force)"{-f,--force}"[Force the removal of one or more volumes]" \ + "($help -):volume:__docker_complete_volumes" && ret=0 + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_volume_commands" && ret=0 + ;; + esac + + return ret +} + +# EO volume + +__docker_caching_policy() { + oldp=( "$1"(Nmh+1) ) # 1 hour + (( $#oldp )) +} + +__docker_commands() { + local cache_policy + integer force_invalidation=0 + + zstyle -s ":completion:${curcontext}:" cache-policy cache_policy + if [[ -z "$cache_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy __docker_caching_policy + fi + + if ( (( ! ${+_docker_hide_legacy_commands} )) || _cache_invalid docker_hide_legacy_commands ) \ + && ! _retrieve_cache docker_hide_legacy_commands; + then + _docker_hide_legacy_commands="${DOCKER_HIDE_LEGACY_COMMANDS}" + _store_cache docker_hide_legacy_commands _docker_hide_legacy_commands + fi + + if [[ "${_docker_hide_legacy_commands}" != "${DOCKER_HIDE_LEGACY_COMMANDS}" ]]; then + force_invalidation=1 + _docker_hide_legacy_commands="${DOCKER_HIDE_LEGACY_COMMANDS}" + _store_cache docker_hide_legacy_commands _docker_hide_legacy_commands + fi + + if ( [[ ${+_docker_subcommands} -eq 0 ]] || _cache_invalid docker_subcommands ) \ + && ! _retrieve_cache docker_subcommands || [[ ${force_invalidation} -eq 1 ]]; + then + local -a lines + lines=(${(f)"$(_call_program commands docker 2>&1)"}) + _docker_subcommands=(${${${(M)${lines[$((${lines[(i)*Commands:]} + 1)),-1]}:# *}## #}/ ##/:}) + _docker_subcommands=($_docker_subcommands 'daemon:Enable daemon mode' 'help:Show help for a command') + (( $#_docker_subcommands > 2 )) && _store_cache docker_subcommands _docker_subcommands + fi + _describe -t docker-commands "docker command" _docker_subcommands +} + +__docker_subcommand() { + local -a _command_args opts_help + local expl help="--help" + integer ret=1 + + opts_help=("(: -)--help[Print usage]") + + case "$words[1]" in + (attach|commit|cp|create|diff|exec|export|kill|logs|pause|unpause|port|rename|restart|rm|run|start|stats|stop|top|update|wait) + __docker_container_subcommand && ret=0 + ;; + (build|history|import|load|pull|push|save|tag) + __docker_image_subcommand && ret=0 + ;; + (checkpoint) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_checkpoint_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_checkpoint_subcommand && ret=0 + ;; + esac + ;; + (container) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_container_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_container_subcommand && ret=0 + ;; + esac + ;; + (daemon) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help)*--add-runtime=[Register an additional OCI compatible runtime]:runtime:__docker_complete_runtimes" \ + "($help)*--allow-nondistributable-artifacts=[Push nondistributable artifacts to specified registries]:registry: " \ + "($help)--api-cors-header=[CORS headers in the Engine API]:CORS headers: " \ + "($help)*--authorization-plugin=[Authorization plugins to load]" \ + "($help -b --bridge)"{-b=,--bridge=}"[Attach containers to a network bridge]:bridge:_net_interfaces" \ + "($help)--bip=[Network bridge IP]:IP address: " \ + "($help)--cgroup-parent=[Parent cgroup for all containers]:cgroup: " \ + "($help)--cluster-advertise=[Address or interface name to advertise]:Instance to advertise (host\:port): " \ + "($help)--cluster-store=[URL of the distributed storage backend]:Cluster Store:->cluster-store" \ + "($help)*--cluster-store-opt=[Cluster store options]:Cluster options:->cluster-store-options" \ + "($help)--config-file=[Path to daemon configuration file]:Config File:_files" \ + "($help)--containerd=[Path to containerd socket]:socket:_files -g \"*.sock\"" \ + "($help)--data-root=[Root directory of persisted Docker data]:path:_directories" \ + "($help -D --debug)"{-D,--debug}"[Enable debug mode]" \ + "($help)--default-gateway[Container default gateway IPv4 address]:IPv4 address: " \ + "($help)--default-gateway-v6[Container default gateway IPv6 address]:IPv6 address: " \ + "($help)--default-shm-size=[Default shm size for containers]:size:" \ + "($help)*--default-ulimit=[Default ulimits for containers]:ulimit: " \ + "($help)--disable-legacy-registry[Disable contacting legacy registries (default true)]" \ + "($help)*--dns=[DNS server to use]:DNS: " \ + "($help)*--dns-opt=[DNS options to use]:DNS option: " \ + "($help)*--dns-search=[DNS search domains to use]:DNS search: " \ + "($help)*--exec-opt=[Runtime execution options]:runtime execution options: " \ + "($help)--exec-root=[Root directory for execution state files]:path:_directories" \ + "($help)--experimental[Enable experimental features]" \ + "($help)--fixed-cidr=[IPv4 subnet for fixed IPs]:IPv4 subnet: " \ + "($help)--fixed-cidr-v6=[IPv6 subnet for fixed IPs]:IPv6 subnet: " \ + "($help -G --group)"{-G=,--group=}"[Group for the unix socket]:group:_groups" \ + "($help -H --host)"{-H=,--host=}"[tcp://host:port to bind/connect to]:host: " \ + "($help)--icc[Enable inter-container communication]" \ + "($help)--init[Run an init inside containers to forward signals and reap processes]" \ + "($help)--init-path=[Path to the docker-init binary]:docker-init binary:_files" \ + "($help)*--insecure-registry=[Enable insecure registry communication]:registry: " \ + "($help)--ip=[Default IP when binding container ports]" \ + "($help)--ip-forward[Enable net.ipv4.ip_forward]" \ + "($help)--ip-masq[Enable IP masquerading]" \ + "($help)--iptables[Enable addition of iptables rules]" \ + "($help)--ipv6[Enable IPv6 networking]" \ + "($help -l --log-level)"{-l=,--log-level=}"[Logging level]:level:(debug info warn error fatal)" \ + "($help)*--label=[Key=value labels]:label: " \ + "($help)--live-restore[Enable live restore of docker when containers are still running]" \ + "($help)--log-driver=[Default driver for container logs]:logging driver:__docker_complete_log_drivers" \ + "($help)*--log-opt=[Default log driver options for containers]:log driver options:__docker_complete_log_options" \ + "($help)--max-concurrent-downloads[Set the max concurrent downloads for each pull]" \ + "($help)--max-concurrent-uploads[Set the max concurrent uploads for each push]" \ + "($help)--mtu=[Network MTU]:mtu:(0 576 1420 1500 9000)" \ + "($help)--oom-score-adjust=[Set the oom_score_adj for the daemon]:oom-score:(-500)" \ + "($help -p --pidfile)"{-p=,--pidfile=}"[Path to use for daemon PID file]:PID file:_files" \ + "($help)--raw-logs[Full timestamps without ANSI coloring]" \ + "($help)*--registry-mirror=[Preferred Docker registry mirror]:registry mirror: " \ + "($help)--seccomp-profile=[Path to seccomp profile]:path:_files -g \"*.json\"" \ + "($help -s --storage-driver)"{-s=,--storage-driver=}"[Storage driver to use]:driver:(aufs btrfs devicemapper overlay overlay2 vfs zfs)" \ + "($help)--selinux-enabled[Enable selinux support]" \ + "($help)--shutdown-timeout=[Set the shutdown timeout value in seconds]:time: " \ + "($help)*--storage-opt=[Storage driver options]:storage driver options: " \ + "($help)--tls[Use TLS]" \ + "($help)--tlscacert=[Trust certs signed only by this CA]:PEM file:_files -g \"*.(pem|crt)\"" \ + "($help)--tlscert=[Path to TLS certificate file]:PEM file:_files -g \"*.(pem|crt)\"" \ + "($help)--tlskey=[Path to TLS key file]:Key file:_files -g \"*.(pem|key)\"" \ + "($help)--tlsverify[Use TLS and verify the remote]" \ + "($help)--userns-remap=[User/Group setting for user namespaces]:user\:group:->users-groups" \ + "($help)--userland-proxy[Use userland proxy for loopback traffic]" \ + "($help)--userland-proxy-path=[Path to the userland proxy binary]:binary:_files" && ret=0 + + case $state in + (cluster-store) + if compset -P '*://'; then + _message 'host:port' && ret=0 + else + store=('consul' 'etcd' 'zk') + _describe -t cluster-store "Cluster Store" store -qS "://" && ret=0 + fi + ;; + (cluster-store-options) + if compset -P '*='; then + _files && ret=0 + else + opts=('discovery.heartbeat' 'discovery.ttl' 'kv.cacertfile' 'kv.certfile' 'kv.keyfile' 'kv.path') + _describe -t cluster-store-opts "Cluster Store Options" opts -qS "=" && ret=0 + fi + ;; + (users-groups) + if compset -P '*:'; then + _groups && ret=0 + else + _describe -t userns-default "default Docker user management" '(default)' && ret=0 + _users && ret=0 + fi + ;; + esac + ;; + (events|info) + __docker_system_subcommand && ret=0 + ;; + (image) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_image_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_image_subcommand && ret=0 + ;; + esac + ;; + (images) + words[1]='ls' + __docker_image_subcommand && ret=0 + ;; + (inspect) + local state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " \ + "($help -s --size)"{-s,--size}"[Display total file sizes if the type is container]" \ + "($help)--type=[Return JSON for specified type]:type:(container image network node plugin service volume)" \ + "($help -)*: :->values" && ret=0 + + case $state in + (values) + if [[ ${words[(r)--type=container]} == --type=container ]]; then + __docker_complete_containers && ret=0 + elif [[ ${words[(r)--type=image]} == --type=image ]]; then + __docker_complete_images && ret=0 + elif [[ ${words[(r)--type=network]} == --type=network ]]; then + __docker_complete_networks && ret=0 + elif [[ ${words[(r)--type=node]} == --type=node ]]; then + __docker_complete_nodes && ret=0 + elif [[ ${words[(r)--type=plugin]} == --type=plugin ]]; then + __docker_complete_plugins && ret=0 + elif [[ ${words[(r)--type=service]} == --type=secrets ]]; then + __docker_complete_secrets && ret=0 + elif [[ ${words[(r)--type=service]} == --type=service ]]; then + __docker_complete_services && ret=0 + elif [[ ${words[(r)--type=volume]} == --type=volume ]]; then + __docker_complete_volumes && ret=0 + else + __docker_complete_containers + __docker_complete_images + __docker_complete_networks + __docker_complete_nodes + __docker_complete_plugins + __docker_complete_secrets + __docker_complete_services + __docker_complete_volumes && ret=0 + fi + ;; + esac + ;; + (login) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help -p --password)"{-p=,--password=}"[Password]:password: " \ + "($help -u --user)"{-u=,--user=}"[Username]:username: " \ + "($help -)1:server: " && ret=0 + ;; + (logout) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help -)1:server: " && ret=0 + ;; + (network) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_network_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_network_subcommand && ret=0 + ;; + esac + ;; + (node) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_node_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_node_subcommand && ret=0 + ;; + esac + ;; + (plugin) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_plugin_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_plugin_subcommand && ret=0 + ;; + esac + ;; + (ps) + words[1]='ls' + __docker_container_subcommand && ret=0 + ;; + (rmi) + words[1]='rm' + __docker_image_subcommand && ret=0 + ;; + (search) + _arguments $(__docker_arguments) -A '-*' \ + $opts_help \ + "($help)*"{-f=,--filter=}"[Filter values]:filter:__docker_complete_search_filters" \ + "($help)--limit=[Maximum returned search results]:limit:(1 5 10 25 50)" \ + "($help)--no-trunc[Do not truncate output]" \ + "($help -):term: " && ret=0 + ;; + (secret) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_secret_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_secret_subcommand && ret=0 + ;; + esac + ;; + (service) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_service_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_service_subcommand && ret=0 + ;; + esac + ;; + (stack) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_stack_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_stack_subcommand && ret=0 + ;; + esac + ;; + (swarm) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_swarm_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_swarm_subcommand && ret=0 + ;; + esac + ;; + (system) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_system_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_system_subcommand && ret=0 + ;; + esac + ;; + (version) + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -f --format)"{-f=,--format=}"[Format the output using the given go template]:template: " && ret=0 + ;; + (volume) + local curcontext="$curcontext" state + _arguments $(__docker_arguments) \ + $opts_help \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + case $state in + (command) + __docker_volume_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-${words[-1]}: + __docker_volume_subcommand && ret=0 + ;; + esac + ;; + (help) + _arguments $(__docker_arguments) ":subcommand:__docker_commands" && ret=0 + ;; + esac + + return ret +} + +_docker() { + # Support for subservices, which allows for `compdef _docker docker-shell=_docker_containers`. + # Based on /usr/share/zsh/functions/Completion/Unix/_git without support for `ret`. + if [[ $service != docker ]]; then + _call_function - _$service + return + fi + + local curcontext="$curcontext" state line help="-h --help" + integer ret=1 + typeset -A opt_args + + _arguments $(__docker_arguments) -C \ + "(: -)"{-h,--help}"[Print usage]" \ + "($help)--config[Location of client config files]:path:_directories" \ + "($help -D --debug)"{-D,--debug}"[Enable debug mode]" \ + "($help -H --host)"{-H=,--host=}"[tcp://host:port to bind/connect to]:host: " \ + "($help -l --log-level)"{-l=,--log-level=}"[Logging level]:level:(debug info warn error fatal)" \ + "($help)--tls[Use TLS]" \ + "($help)--tlscacert=[Trust certs signed only by this CA]:PEM file:_files -g "*.(pem|crt)"" \ + "($help)--tlscert=[Path to TLS certificate file]:PEM file:_files -g "*.(pem|crt)"" \ + "($help)--tlskey=[Path to TLS key file]:Key file:_files -g "*.(pem|key)"" \ + "($help)--tlsverify[Use TLS and verify the remote]" \ + "($help)--userland-proxy[Use userland proxy for loopback traffic]" \ + "($help -v --version)"{-v,--version}"[Print version information and quit]" \ + "($help -): :->command" \ + "($help -)*:: :->option-or-argument" && ret=0 + + local host=${opt_args[-H]}${opt_args[--host]} + local config=${opt_args[--config]} + local docker_options="${host:+--host $host} ${config:+--config $config}" + + case $state in + (command) + __docker_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-$words[1]: + __docker_subcommand && ret=0 + ;; + esac + + return ret +} + +_dockerd() { + integer ret=1 + words[1]='daemon' + __docker_subcommand && ret=0 + return ret +} + +_docker "$@" + +# Local Variables: +# mode: Shell-Script +# sh-indentation: 4 +# indent-tabs-mode: nil +# sh-basic-offset: 4 +# End: +# vim: ft=zsh sw=4 ts=4 et diff --git a/templates/.bin/_docker-compose b/templates/.bin/_docker-compose new file mode 100755 index 0000000..2947cef --- /dev/null +++ b/templates/.bin/_docker-compose @@ -0,0 +1,455 @@ +#compdef docker-compose + +# Description +# ----------- +# zsh completion for docker-compose +# https://github.com/sdurrheimer/docker-compose-zsh-completion +# ------------------------------------------------------------------------- +# Version +# ------- +# 1.5.0 +# ------------------------------------------------------------------------- +# Authors +# ------- +# * Steve Durrheimer <s.durrheimer@gmail.com> +# ------------------------------------------------------------------------- +# Inspiration +# ----------- +# * @albers docker-compose bash completion script +# * @felixr docker zsh completion script : https://github.com/felixr/docker-zsh-completion +# ------------------------------------------------------------------------- + +__docker-compose_q() { + docker-compose 2>/dev/null $compose_options "$@" +} + +# All services defined in docker-compose.yml +__docker-compose_all_services_in_compose_file() { + local already_selected + local -a services + already_selected=$(echo $words | tr " " "|") + __docker-compose_q config --services \ + | grep -Ev "^(${already_selected})$" +} + +# All services, even those without an existing container +__docker-compose_services_all() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + services=$(__docker-compose_all_services_in_compose_file) + _alternative "args:services:($services)" && ret=0 + + return ret +} + +# All services that have an entry with the given key in their docker-compose.yml section +__docker-compose_services_with_key() { + local already_selected + local -a buildable + already_selected=$(echo $words | tr " " "|") + # flatten sections to one line, then filter lines containing the key and return section name. + __docker-compose_q config \ + | sed -n -e '/^services:/,/^[^ ]/p' \ + | sed -n 's/^ //p' \ + | awk '/^[a-zA-Z0-9]/{printf "\n"};{printf $0;next;}' \ + | grep " \+$1:" \ + | cut -d: -f1 \ + | grep -Ev "^(${already_selected})$" +} + +# All services that are defined by a Dockerfile reference +__docker-compose_services_from_build() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + buildable=$(__docker-compose_services_with_key build) + _alternative "args:buildable services:($buildable)" && ret=0 + + return ret +} + +# All services that are defined by an image +__docker-compose_services_from_image() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + pullable=$(__docker-compose_services_with_key image) + _alternative "args:pullable services:($pullable)" && ret=0 + + return ret +} + +__docker-compose_get_services() { + [[ $PREFIX = -* ]] && return 1 + integer ret=1 + local kind + declare -a running paused stopped lines args services + + docker_status=$(docker ps > /dev/null 2>&1) + if [ $? -ne 0 ]; then + _message "Error! Docker is not running." + return 1 + fi + + kind=$1 + shift + [[ $kind =~ (stopped|all) ]] && args=($args -a) + + lines=(${(f)"$(_call_program commands docker $docker_options ps $args)"}) + services=(${(f)"$(_call_program commands docker-compose 2>/dev/null $compose_options ps -q)"}) + + # Parse header line to find columns + local i=1 j=1 k header=${lines[1]} + declare -A begin end + while (( j < ${#header} - 1 )); do + i=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 1 )) + j=$(( i + ${${header[$i,-1]}[(i) ]} - 1 )) + k=$(( j + ${${header[$j,-1]}[(i)[^ ]]} - 2 )) + begin[${header[$i,$((j-1))]}]=$i + end[${header[$i,$((j-1))]}]=$k + done + lines=(${lines[2,-1]}) + + # Container ID + local line s name + local -a names + for line in $lines; do + if [[ ${services[@]} == *"${line[${begin[CONTAINER ID]},${end[CONTAINER ID]}]%% ##}"* ]]; then + names=(${(ps:,:)${${line[${begin[NAMES]},-1]}%% *}}) + for name in $names; do + s="${${name%_*}#*_}:${(l:15:: :::)${${line[${begin[CREATED]},${end[CREATED]}]/ ago/}%% ##}}" + s="$s, ${line[${begin[CONTAINER ID]},${end[CONTAINER ID]}]%% ##}" + s="$s, ${${${line[${begin[IMAGE]},${end[IMAGE]}]}/:/\\:}%% ##}" + if [[ ${line[${begin[STATUS]},${end[STATUS]}]} = Exit* ]]; then + stopped=($stopped $s) + else + if [[ ${line[${begin[STATUS]},${end[STATUS]}]} = *\(Paused\)* ]]; then + paused=($paused $s) + fi + running=($running $s) + fi + done + fi + done + + [[ $kind =~ (running|all) ]] && _describe -t services-running "running services" running "$@" && ret=0 + [[ $kind =~ (paused|all) ]] && _describe -t services-paused "paused services" paused "$@" && ret=0 + [[ $kind =~ (stopped|all) ]] && _describe -t services-stopped "stopped services" stopped "$@" && ret=0 + + return ret +} + +__docker-compose_pausedservices() { + [[ $PREFIX = -* ]] && return 1 + __docker-compose_get_services paused "$@" +} + +__docker-compose_stoppedservices() { + [[ $PREFIX = -* ]] && return 1 + __docker-compose_get_services stopped "$@" +} + +__docker-compose_runningservices() { + [[ $PREFIX = -* ]] && return 1 + __docker-compose_get_services running "$@" +} + +__docker-compose_services() { + [[ $PREFIX = -* ]] && return 1 + __docker-compose_get_services all "$@" +} + +__docker-compose_caching_policy() { + oldp=( "$1"(Nmh+1) ) # 1 hour + (( $#oldp )) +} + +__docker-compose_commands() { + local cache_policy + + zstyle -s ":completion:${curcontext}:" cache-policy cache_policy + if [[ -z "$cache_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy __docker-compose_caching_policy + fi + + if ( [[ ${+_docker_compose_subcommands} -eq 0 ]] || _cache_invalid docker_compose_subcommands) \ + && ! _retrieve_cache docker_compose_subcommands; + then + local -a lines + lines=(${(f)"$(_call_program commands docker-compose 2>&1)"}) + _docker_compose_subcommands=(${${${lines[$((${lines[(i)Commands:]} + 1)),${lines[(I) *]}]}## #}/ ##/:}) + (( $#_docker_compose_subcommands > 0 )) && _store_cache docker_compose_subcommands _docker_compose_subcommands + fi + _describe -t docker-compose-commands "docker-compose command" _docker_compose_subcommands +} + +__docker-compose_subcommand() { + local opts_help opts_force_recreate opts_no_recreate opts_no_build opts_remove_orphans opts_timeout opts_no_color opts_no_deps + + opts_help='(: -)--help[Print usage]' + opts_force_recreate="(--no-recreate)--force-recreate[Recreate containers even if their configuration and image haven't changed. Incompatible with --no-recreate.]" + opts_no_recreate="(--force-recreate)--no-recreate[If containers already exist, don't recreate them. Incompatible with --force-recreate.]" + opts_no_build="(--build)--no-build[Don't build an image, even if it's missing.]" + opts_remove_orphans="--remove-orphans[Remove containers for services not defined in the Compose file]" + opts_timeout=('(-t --timeout)'{-t,--timeout}"[Specify a shutdown timeout in seconds. (default: 10)]:seconds: ") + opts_no_color='--no-color[Produce monochrome output.]' + opts_no_deps="--no-deps[Don't start linked services.]" + + integer ret=1 + + case "$words[1]" in + (build) + _arguments \ + $opts_help \ + '--force-rm[Always remove intermediate containers.]' \ + '--no-cache[Do not use cache when building the image.]' \ + '--pull[Always attempt to pull a newer version of the image.]' \ + '*:services:__docker-compose_services_from_build' && ret=0 + ;; + (bundle) + _arguments \ + $opts_help \ + '(--output -o)'{--output,-o}'[Path to write the bundle file to. Defaults to "<project name>.dab".]:file:_files' && ret=0 + ;; + (config) + _arguments \ + $opts_help \ + '(--quiet -q)'{--quiet,-q}"[Only validate the configuration, don't print anything.]" \ + '--services[Print the service names, one per line.]' && ret=0 + ;; + (create) + _arguments \ + $opts_help \ + $opts_force_recreate \ + $opts_no_recreate \ + $opts_no_build \ + "(--no-build)--build[Build images before creating containers.]" \ + '*:services:__docker-compose_services_all' && ret=0 + ;; + (down) + _arguments \ + $opts_help \ + "--rmi[Remove images. Type must be one of: 'all': Remove all images used by any service. 'local': Remove only images that don't have a custom tag set by the \`image\` field.]:type:(all local)" \ + '(-v --volumes)'{-v,--volumes}"[Remove named volumes declared in the \`volumes\` section of the Compose file and anonymous volumes attached to containers.]" \ + $opts_remove_orphans && ret=0 + ;; + (events) + _arguments \ + $opts_help \ + '--json[Output events as a stream of json objects]' \ + '*:services:__docker-compose_services_all' && ret=0 + ;; + (exec) + _arguments \ + $opts_help \ + '-d[Detached mode: Run command in the background.]' \ + '--privileged[Give extended privileges to the process.]' \ + '--user=[Run the command as this user.]:username:_users' \ + '-T[Disable pseudo-tty allocation. By default `docker-compose exec` allocates a TTY.]' \ + '--index=[Index of the container if there are multiple instances of a service \[default: 1\]]:index: ' \ + '(-):running services:__docker-compose_runningservices' \ + '(-):command: _command_names -e' \ + '*::arguments: _normal' && ret=0 + ;; + (help) + _arguments ':subcommand:__docker-compose_commands' && ret=0 + ;; + (kill) + _arguments \ + $opts_help \ + '-s[SIGNAL to send to the container. Default signal is SIGKILL.]:signal:_signals' \ + '*:running services:__docker-compose_runningservices' && ret=0 + ;; + (logs) + _arguments \ + $opts_help \ + '(-f --follow)'{-f,--follow}'[Follow log output]' \ + $opts_no_color \ + '--tail=[Number of lines to show from the end of the logs for each container.]:number of lines: ' \ + '(-t --timestamps)'{-t,--timestamps}'[Show timestamps]' \ + '*:services:__docker-compose_services_all' && ret=0 + ;; + (pause) + _arguments \ + $opts_help \ + '*:running services:__docker-compose_runningservices' && ret=0 + ;; + (port) + _arguments \ + $opts_help \ + '--protocol=[tcp or udp \[default: tcp\]]:protocol:(tcp udp)' \ + '--index=[index of the container if there are multiple instances of a service \[default: 1\]]:index: ' \ + '1:running services:__docker-compose_runningservices' \ + '2:port:_ports' && ret=0 + ;; + (ps) + _arguments \ + $opts_help \ + '-q[Only display IDs]' \ + '*:services:__docker-compose_services_all' && ret=0 + ;; + (pull) + _arguments \ + $opts_help \ + '--ignore-pull-failures[Pull what it can and ignores images with pull failures.]' \ + '*:services:__docker-compose_services_from_image' && ret=0 + ;; + (push) + _arguments \ + $opts_help \ + '--ignore-push-failures[Push what it can and ignores images with push failures.]' \ + '*:services:__docker-compose_services' && ret=0 + ;; + (rm) + _arguments \ + $opts_help \ + '(-f --force)'{-f,--force}"[Don't ask to confirm removal]" \ + '-v[Remove any anonymous volumes attached to containers]' \ + '*:stopped services:__docker-compose_stoppedservices' && ret=0 + ;; + (run) + _arguments \ + $opts_help \ + '-d[Detached mode: Run container in the background, print new container name.]' \ + '*-e[KEY=VAL Set an environment variable (can be used multiple times)]:environment variable KEY=VAL: ' \ + '--entrypoint[Overwrite the entrypoint of the image.]:entry point: ' \ + '--name=[Assign a name to the container]:name: ' \ + $opts_no_deps \ + '(-p --publish)'{-p,--publish=}"[Publish a container's port(s) to the host]" \ + '--rm[Remove container after run. Ignored in detached mode.]' \ + "--service-ports[Run command with the service's ports enabled and mapped to the host.]" \ + '-T[Disable pseudo-tty allocation. By default `docker-compose run` allocates a TTY.]' \ + '(-u --user)'{-u,--user=}'[Run as specified username or uid]:username or uid:_users' \ + '(-w --workdir)'{-w,--workdir=}'[Working directory inside the container]:workdir: ' \ + '(-):services:__docker-compose_services' \ + '(-):command: _command_names -e' \ + '*::arguments: _normal' && ret=0 + ;; + (scale) + _arguments \ + $opts_help \ + $opts_timeout \ + '*:running services:__docker-compose_runningservices' && ret=0 + ;; + (start) + _arguments \ + $opts_help \ + '*:stopped services:__docker-compose_stoppedservices' && ret=0 + ;; + (stop|restart) + _arguments \ + $opts_help \ + $opts_timeout \ + '*:running services:__docker-compose_runningservices' && ret=0 + ;; + (unpause) + _arguments \ + $opts_help \ + '*:paused services:__docker-compose_pausedservices' && ret=0 + ;; + (up) + _arguments \ + $opts_help \ + '(--abort-on-container-exit)-d[Detached mode: Run containers in the background, print new container names. Incompatible with --abort-on-container-exit.]' \ + $opts_no_color \ + $opts_no_deps \ + $opts_force_recreate \ + $opts_no_recreate \ + $opts_no_build \ + "(--no-build)--build[Build images before starting containers.]" \ + "(-d)--abort-on-container-exit[Stops all containers if any container was stopped. Incompatible with -d.]" \ + '(-t --timeout)'{-t,--timeout}"[Use this timeout in seconds for container shutdown when attached or when containers are already running. (default: 10)]:seconds: " \ + $opts_remove_orphans \ + '*:services:__docker-compose_services_all' && ret=0 + ;; + (version) + _arguments \ + $opts_help \ + "--short[Shows only Compose's version number.]" && ret=0 + ;; + (*) + _message 'Unknown sub command' && ret=1 + ;; + esac + + return ret +} + +_docker-compose() { + # Support for subservices, which allows for `compdef _docker docker-shell=_docker_containers`. + # Based on /usr/share/zsh/functions/Completion/Unix/_git without support for `ret`. + if [[ $service != docker-compose ]]; then + _call_function - _$service + return + fi + + local curcontext="$curcontext" state line + integer ret=1 + typeset -A opt_args + + _arguments -C \ + '(- :)'{-h,--help}'[Get help]' \ + '(-f --file)'{-f,--file}'[Specify an alternate docker-compose file (default: docker-compose.yml)]:file:_files -g "*.yml"' \ + '(-p --project-name)'{-p,--project-name}'[Specify an alternate project name (default: directory name)]:project name:' \ + '--verbose[Show more output]' \ + '(- :)'{-v,--version}'[Print version and exit]' \ + '(-H --host)'{-H,--host}'[Daemon socket to connect to]:host:' \ + '--tls[Use TLS; implied by --tlsverify]' \ + '--tlscacert=[Trust certs signed only by this CA]:ca path:' \ + '--tlscert=[Path to TLS certificate file]:client cert path:' \ + '--tlskey=[Path to TLS key file]:tls key path:' \ + '--tlsverify[Use TLS and verify the remote]' \ + "--skip-hostname-check[Don't check the daemon's hostname against the name specified in the client certificate (for example if your docker host is an IP address)]" \ + '(-): :->command' \ + '(-)*:: :->option-or-argument' && ret=0 + + local -a relevant_compose_flags relevant_docker_flags compose_options docker_options + + relevant_compose_flags=( + "--file" "-f" + "--host" "-H" + "--project-name" "-p" + "--tls" + "--tlscacert" + "--tlscert" + "--tlskey" + "--tlsverify" + "--skip-hostname-check" + ) + + relevant_docker_flags=( + "--host" "-H" + "--tls" + "--tlscacert" + "--tlscert" + "--tlskey" + "--tlsverify" + ) + + for k in "${(@k)opt_args}"; do + if [[ -n "${relevant_docker_flags[(r)$k]}" ]]; then + docker_options+=$k + if [[ -n "$opt_args[$k]" ]]; then + docker_options+=$opt_args[$k] + fi + fi + if [[ -n "${relevant_compose_flags[(r)$k]}" ]]; then + compose_options+=$k + if [[ -n "$opt_args[$k]" ]]; then + compose_options+=$opt_args[$k] + fi + fi + done + + case $state in + (command) + __docker-compose_commands && ret=0 + ;; + (option-or-argument) + curcontext=${curcontext%:*:*}:docker-compose-$words[1]: + __docker-compose_subcommand && ret=0 + ;; + esac + + return ret +} + +_docker-compose "$@" diff --git a/templates/.bin/_jq b/templates/.bin/_jq new file mode 100755 index 0000000..efda3bd --- /dev/null +++ b/templates/.bin/_jq @@ -0,0 +1,77 @@ +#compdef jq +# ------------------------------------------------------------------------------ +# Copyright (c) 2011 Github zsh-users - http://github.com/zsh-users +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# * Neither the name of the zsh-users nor the +# names of its contributors may be used to endorse or promote products +# derived from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY +# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# ------------------------------------------------------------------------------ +# Description +# ----------- +# +# Completion script for jq (http://stedolan.github.io/jq/) +# +# ------------------------------------------------------------------------------ +# Authors +# ------- +# +# * Hideaki Miyake (https://github.com/mollifier) +# +# ------------------------------------------------------------------------------ + +declare -a opts args +args=( + '(-h --help)'{-h,--help}'[display help information]' + '(-V --version)'{-V,--version}'[display version information]' + '(-s --slurp)'{-s,--slurp}'[run the filter just once]' + '(-R --raw-input)'{-R,--raw-input}'[parse the input as not JSON but string]' + '(-n --null-input)'{-n,--null-input}'[run the filter using null as the input]' + '(-c --compact-output)'{-c,--compact-output}'[compact output]' \ + '(-C --color-output)'{-C,--color-output}'[colorize the output even if writing to a pipe or a file]' + '(-M --monochrome-output)'{-M,--monochrome-output}'[not colorize the output]' + '(-a --ascii-output)'{-a,--ascii-output}'[output with pure ASCII character]' + '(-r --raw-output)'{-r,--raw-output}'[not format string result as a JSON string with quotes]' + '--arg[passes a value to the jq program, e.g. --arg foo bar]:jq variable: ' + '1: :_guard "^-*" pattern' + '*:files:->file' +) +local curcontext=$curcontext state line ret=1 +declare -A opt_args + +_arguments -C $opts \ + $args && ret=0 + +case $state in + file) + _files && ret=0 + ;; +esac + +return $ret + +# Local Variables: +# mode: Shell-Script +# sh-indentation: 2 +# indent-tabs-mode: nil +# sh-basic-offset: 2 +# End: +# vim: ft=zsh sw=2 ts=2 et diff --git a/templates/.bin/alacritty-fullscreen b/templates/.bin/alacritty-fullscreen new file mode 100755 index 0000000..42f80e3 --- /dev/null +++ b/templates/.bin/alacritty-fullscreen @@ -0,0 +1,11 @@ +#!/usr/bin/osascript + +tell application "Alacritty" + tell application "System Events" to tell process "Alacritty" + if front window exists then + tell front window + set value of attribute "AXFullScreen" to true + end tell + end if + end tell +end tell diff --git a/templates/.bin/brightness.sh b/templates/.bin/brightness.sh new file mode 100755 index 0000000..80e317e --- /dev/null +++ b/templates/.bin/brightness.sh @@ -0,0 +1,11 @@ +#!/bin/bash + +basedir="/sys/class/backlight/" +handler=$basedir$(ls $basedir)"/" +old_brightness=$(cat $handler"brightness") +max_brightness=$(cat $handler"max_brightness") +old_brightness_p=$(( 100 * $old_brightness / $max_brightness )) +new_brightness_p=$(( $old_brightness_p $1 )) +new_brightness=$(( $max_brightness * $new_brightness_p / 100 )) +echo $new_brightness > $handler"brightness" + diff --git a/templates/.bin/extract b/templates/.bin/extract new file mode 100755 index 0000000..e6831e4 --- /dev/null +++ b/templates/.bin/extract @@ -0,0 +1,38 @@ +#!/bin/sh + +# credit: http://nparikh.org/notes/zshrc.txt +# Usage: extract <file> +# Description: extracts archived files / mounts disk images +# Note: .dmg/hdiutil is Mac OS X-specific. + +do_autodetect () { + if file "$1" | grep -q 'Zip archive' ; then + unzip "$1" + else + echo "'$1' is not a recognized format" + fi +} + +# first use a simple extension-based approach +if [ -f "$1" ]; then + case $1 in + *.tar.bz2) tar -jxvf "$1" ;; + *.tar.gz) tar -zxvf "$1" ;; + *.bz2) bunzip2 "$1" ;; + *.dmg) hdiutil mount "$1" ;; + *.gz) gunzip "$1" ;; + *.tar) tar -xvf "$1" ;; + *.tbz2) tar -jxvf "$1" ;; + *.tgz) tar -zxvf "$1" ;; + *.zip) unzip "$1" ;; + *.ZIP) unzip "$1" ;; + *.pax) pax -r < "$1" ;; + *.pax.Z) uncompress "$1" --stdout | pax -r ;; + *.Z) uncompress "$1" ;; + + # if there is no recognized extension, try to auto-detect the file type + *) do_autodetect "$1" ;; + esac +else + echo "'$1' is not a valid file" +fi diff --git a/templates/.bin/files b/templates/.bin/files new file mode 100755 index 0000000..491a917 --- /dev/null +++ b/templates/.bin/files @@ -0,0 +1,4 @@ +#!/bin/sh + +grep -ir '$1' $2 | cut -d':' -f1 | sort -u | less + diff --git a/templates/.bin/get_battery b/templates/.bin/get_battery new file mode 100755 index 0000000..45c8b32 --- /dev/null +++ b/templates/.bin/get_battery @@ -0,0 +1,23 @@ +#!/usr/bin/env zsh + +remaining=$(acpi --battery | cut -d':' -f2 | cut -d',' -f2 | sed 's/[^0-9]//g') +state=$(acpi --battery | cut -d':' -f2 | cut -d',' -f1) + +if [[ -z "$remaining" ]]; then + exit +fi + +fa_lightning="<span font='FontAwesome'>\uf0e7</span>" +fa_plug="<span font='FontAwesome'>\uf1e6</span>" +fa_battery="<span font='FontAwesome'>\uf240</span>" +fa_question="<span font='FontAwesome'>\uf128</span>" + +if [[ $(echo "$state" | grep "Discharging") ]]; then + echo "$fa_battery $remaining%" +elif [[ $(echo "$state" | grep "Full") ]]; then + echo "$fa_plug" +elif [[ $(echo "$state" | grep "Unknown") ]]; then + echo "$fa_question" +else + echo "$fa_lightning $remaining%" +fi diff --git a/templates/.bin/get_cpu b/templates/.bin/get_cpu new file mode 100755 index 0000000..4f66833 --- /dev/null +++ b/templates/.bin/get_cpu @@ -0,0 +1,7 @@ +#!/usr/bin/zsh + +idle=$(mpstat -o JSON 1 1 | jq '.sysstat.hosts[0].statistics[0]["cpu-load"][0].idle') +used=$((100.0 - $idle)) +temp=$(acpi --thermal | cut -d':' -f2 | cut -d',' -f2 | sed 's/[^0-9\.]//g') + +printf "<span font='FontAwesome'></span> %d%% %d°C\n" $used $temp diff --git a/templates/.bin/get_date b/templates/.bin/get_date new file mode 100755 index 0000000..295f23b --- /dev/null +++ b/templates/.bin/get_date @@ -0,0 +1,3 @@ +#!/bin/sh + +echo "<span font='FontAwesome'></span> $(date +'%a %d %b %H:%M')" diff --git a/templates/.bin/get_disk b/templates/.bin/get_disk new file mode 100755 index 0000000..6113c41 --- /dev/null +++ b/templates/.bin/get_disk @@ -0,0 +1,4 @@ +#!/bin/sh + +avail=$(df -h --output=avail / | tail -n1 | sed 's/ //g') +echo "<span font='FontAwesome'></span> $avail" diff --git a/templates/.bin/get_essid b/templates/.bin/get_essid new file mode 100755 index 0000000..183c3f5 --- /dev/null +++ b/templates/.bin/get_essid @@ -0,0 +1,35 @@ +#!/bin/bash +# Copyright (C) 2018 borgified <borgified@gmail.com> +# Copyright (C) 2014 Alexander Keller <github@nycroth.com> + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +#------------------------------------------------------------------------ + +INTERFACE="${INTERFACE:-wlan0}" + +#------------------------------------------------------------------------ + +# As per #36 -- It is transparent: e.g. if the machine has no battery or wireless +# connection (think desktop), the corresponding block should not be displayed. +[[ ! -d /sys/class/net/${INTERFACE}/wireless ]] || + [[ "$(cat /sys/class/net/$INTERFACE/operstate)" = 'down' ]] && exit + +#------------------------------------------------------------------------ + +ESSID=$(/sbin/iwconfig $INTERFACE | perl -n -e'/ESSID:"(.*?)"/ && print $1') + +#------------------------------------------------------------------------ + +echo "<span font='FontAwesome'></span> $ESSID" diff --git a/templates/.bin/get_iface b/templates/.bin/get_iface new file mode 100755 index 0000000..8a86cec --- /dev/null +++ b/templates/.bin/get_iface @@ -0,0 +1,66 @@ +#!/bin/bash +# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info> +# Copyright (C) 2014 Alexander Keller <github@nycroth.com> + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +#------------------------------------------------------------------------ + +# Use the provided interface, otherwise the device used for the default route. +IF="${IFACE:-$BLOCK_INSTANCE}" +IF="${IF:-$(ip route | awk '/^default/ { print $5 ; exit }')}" + +# Exit if there is no default route +[[ -z "$IF" ]] && exit + +#------------------------------------------------------------------------ + +# As per #36 -- It is transparent: e.g. if the machine has no battery or wireless +# connection (think desktop), the corresponding block should not be displayed. +[[ ! -d /sys/class/net/${IF} ]] && exit + +#------------------------------------------------------------------------ + +AF=${ADDRESS_FAMILY:-inet6?} +LABEL="${LABEL:-}" + +for flag in "$1" "$2"; do + case "$flag" in + -4) + AF=inet ;; + -6) + AF=inet6 ;; + -L) + if [[ "$IF" = "" ]]; then + LABEL="iface " + else + LABEL="$IF: " + fi ;; + esac +done + +if [[ "$IF" = "" ]] || [[ "$(cat /sys/class/net/$IF/operstate)" = 'down' ]]; then + echo "${LABEL}down" # full text + echo "${LABEL}down" # short text + echo \#FF0000 # color + exit +fi + +# if no interface is found, use the first device with a global scope +IPADDR=$(ip addr show $IF | perl -n -e "/$AF ([^ \/]+).* scope global/ && print \$1 and exit") + +#------------------------------------------------------------------------ + +echo "$LABEL$IPADDR" # full text +echo "$LABEL$IPADDR" # short text diff --git a/templates/.bin/get_memory b/templates/.bin/get_memory new file mode 100755 index 0000000..1c82944 --- /dev/null +++ b/templates/.bin/get_memory @@ -0,0 +1,45 @@ +#!/bin/sh +# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info> + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +pct_used=$(awk ' +/^MemTotal:/ { + mem_total=$2 +} +/^MemFree:/ { + mem_free=$2 +} +/^Buffers:/ { + mem_free+=$2 +} +/^Cached:/ { + mem_free+=$2 +} +END { + free=mem_free/1024/1024 + used=(mem_total-mem_free)/1024/1024 + total=mem_total/1024/1024 + + pct=0 + if (total > 0) { + pct=used/total*100 + } + + # short text + printf("%.f\n", pct) +} +' /proc/meminfo) + +echo "<span font='FontAwesome'></span> $pct_used%" diff --git a/templates/.bin/get_public_ip b/templates/.bin/get_public_ip new file mode 100755 index 0000000..7625918 --- /dev/null +++ b/templates/.bin/get_public_ip @@ -0,0 +1,3 @@ +#!/bin/sh + +wget -qO - icanhazip.com diff --git a/templates/.bin/get_volume b/templates/.bin/get_volume new file mode 100755 index 0000000..30516b0 --- /dev/null +++ b/templates/.bin/get_volume @@ -0,0 +1,36 @@ +#!/bin/bash +# Displays the default device, volume, and mute status for i3blocks + +set -a + +AUDIO_MUTED_SYMBOL= +AUDIO_SYMBOL= + +MIXER="default" +if amixer -D pulse info >/dev/null 2>&1 ; then + MIXER="pulse" +fi + +function print_block { + ACTIVE=$(pacmd list-sinks | grep "state\: RUNNING" -B4 -A7 | grep "index:\|name:\|volume: front\|muted:") + [ -z "$ACTIVE" ] && ACTIVE=$(pacmd list-sinks | grep "index:\|name:\|volume: front\|muted:" | grep -A3 '*') + for name in INDEX NAME VOL MUTED; do + read $name + done < <(echo "$ACTIVE") + INDEX=$(echo "$INDEX" | grep -o '[0-9]\+') + VOL=$(echo "$VOL" | grep -o "[0-9]*%" | head -1 ) + VOL="${VOL%?}" + + if [[ $MUTED =~ "no" ]] ; then + SYMB=$AUDIO_SYMBOL + else + SYMB=$AUDIO_MUTED_SYMBOL + fi + + echo "<span font='FontAwesome'>${SYMB}</span> ${VOL}%" +} + +print_block +while read -r EVENT; do + print_block +done < <(pactl subscribe | stdbuf -oL grep change) diff --git a/templates/.bin/headers b/templates/.bin/headers new file mode 100755 index 0000000..9dd1f72 --- /dev/null +++ b/templates/.bin/headers @@ -0,0 +1,8 @@ +#!/bin/sh +# +# https://github.com/rtomayko/dotfiles/blob/rtomayko/bin/headers + +curl -sv "$@" 2>&1 >/dev/null | + grep -v "^\*" | + grep -v "^}" | + cut -c3-
\ No newline at end of file diff --git a/templates/.bin/launch-chrome b/templates/.bin/launch-chrome new file mode 100755 index 0000000..7251869 --- /dev/null +++ b/templates/.bin/launch-chrome @@ -0,0 +1,7 @@ +#!/usr/bin/env zsh + +if [[ $(uname) == "FreeBSD" ]]; then + chrome +elif [[ $(uname -a | grep Ubuntu) ]]; then + google-chrome +fi diff --git a/templates/.bin/lsproc b/templates/.bin/lsproc new file mode 100755 index 0000000..eb96a12 --- /dev/null +++ b/templates/.bin/lsproc @@ -0,0 +1,3 @@ +#!/bin/sh + +grep -v '#' Procfile | cut -d':' -f1 | sed '/^\s*$/d' diff --git a/templates/.bin/mailsync b/templates/.bin/mailsync new file mode 100755 index 0000000..9bb013f --- /dev/null +++ b/templates/.bin/mailsync @@ -0,0 +1,57 @@ +#!/usr/bin/env bash + +BUNDLE=com.benburwell.mailsync +PLIST="$HOME/Library/LaunchAgents/$BUNDLE.plist" + +monitor () { + local pid=$1 i=0 + while ps "$pid" &>/dev/null; do + if (( i++ > 10 )); then + echo "Max checks reached. Sending SIGKILL to $pid..." >&2 + kill -9 "$pid"; return 1 + fi + sleep 10 + done + return 0 +} + +if [[ "$1" == "install" ]]; then + SCRIPTPATH="$( cd "$(dirname "$0")" || exit 1; pwd -P )/$(basename "$0")" + cat > "$PLIST" <<EOF +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> + <dict> + <key>Label</key> + <string>$BUNDLE</string> + + <key>ProgramArguments</key> + <array> + <string>$SCRIPTPATH</string> + </array> + + <key>StartInterval</key> + <integer>180</integer> + + <key>StandardErrorPath</key> + <string>/tmp/offlineimap.err.log</string> + + <key>StandardOutPath</key> + <string>/tmp/offlineimap.log</string> + </dict> +</plist> +EOF + launchctl load "$PLIST" + exit 0 +elif [[ "$1" == "uninstall" ]]; then + launchctl unload "$PLIST" + rm -f "$PLIST" + exit $? +elif [[ $# -gt 0 ]]; then + echo "Unrecognized options, did you mean 'install' or 'uninstall'?" + exit 1 +fi + +echo "STARTING $(date)" +offlineimap -o & monitor $! +echo "DONE $(date)" diff --git a/templates/.bin/metar b/templates/.bin/metar new file mode 100755 index 0000000..a9d7429 --- /dev/null +++ b/templates/.bin/metar @@ -0,0 +1,29 @@ +#!/bin/bash + +say=0 +jq="/usr/bin/jq" +if [[ ! -x "$jq" && -x "/usr/local/bin/jq" ]]; then + jq="/usr/local/bin/jq" +fi + +while [ $# -gt 0 ]; do + case "$1" in + -s|--say) + say=1 + ;; + -*) + echo "Unknown option flag: $1" + exit 1 + ;; + *) + station=$(echo -n "$1" | tr "a-z" "A-Z") + ;; + esac + shift +done +json=$(curl -s "https://avwx.rest/api/metar/${station:-KBOS}?options=speech") +if [ $say -gt 0 ]; then + echo "$json" | "$jq" --raw-output '.Speech' 2>&1 | say +else + echo "$json" | "$jq" --raw-output '.["Raw-Report"]' 2>&1 +fi diff --git a/templates/.bin/mkaerc b/templates/.bin/mkaerc new file mode 100755 index 0000000..b74abae --- /dev/null +++ b/templates/.bin/mkaerc @@ -0,0 +1,3 @@ +#!/bin/sh + +cd ~/c/aerc && make clean all GOFLAGS=-tags=notmuch && sudo make install diff --git a/templates/.bin/mutt-notmuch-py b/templates/.bin/mutt-notmuch-py new file mode 100755 index 0000000..40c7a76 --- /dev/null +++ b/templates/.bin/mutt-notmuch-py @@ -0,0 +1,157 @@ +#!/usr/bin/env python +""" +mutt-notmuch-py + +This is a Gmail-only version of the original mutt-notmuch script. + +It will interactively ask you for a search query and then symlink the matching +messages to $HOME/.cache/mutt_results. + +Add this to your muttrc. + +macro index / "<enter-command>unset wait_key<enter><shell-escape>mutt-notmuch-py<enter><change-folder-readonly>~/.cache/mutt_results<enter>" \ + "search mail (using notmuch)" + +This script overrides the $HOME/.cache/mutt_results each time you run a query. + +Install this by adding this file somewhere on your PATH. + +Tested on OSX Lion, OSX El Capitan, Fedora 23, and Arch Linux. + +(c) 2012-2016 --- Honza Pokorny +Licensed under BSD +""" + +from __future__ import print_function +import os +import hashlib + +try: + from shlex import quote +except ImportError: + from pipes import quote + +import sys + +from mailbox import Maildir +from optparse import OptionParser +from collections import defaultdict +import readline + +VERSION = '1.3.0' + +try: + from commands import getoutput +except ImportError: + from subprocess import getoutput + +try: + input = raw_input +except NameError: + pass + + +def digest(filename): + with open(filename, 'rb') as f: + return hashlib.sha1(f.read()).hexdigest() + + +def pick_all_mail(messages): + for m in messages: + if 'All Mail' in m: + return m + + +def empty_dir(directory): + box = Maildir(directory) + box.clear() + + +def command(cmd): + return getoutput(cmd) + + +def normalize(path): + if path: + # Use expanduser() so that os.symlink() won't get weirded out by + # tildes. + return os.path.expanduser(path).rstrip('/') + + +def main(dest_box, options): + is_gmail = options.gmail + filter_path = options.base_path + history_path = normalize(options.history_path) + if history_path and os.path.exists(history_path): + readline.read_history_file(history_path) + query = input('Query: ') + if history_path: + readline.write_history_file(history_path) + + command('mkdir -p %s/cur' % dest_box) + command('mkdir -p %s/new' % dest_box) + + empty_dir(dest_box) + + files = command('notmuch search --output=files {}'.format(quote(query))).split('\n') + + data = defaultdict(list) + messages = [] + + for f in files: + if not f: + continue + + if filter_path is not None and filter_path not in f: + continue + + try: + sha = digest(f) + data[sha].append(f) + except IOError: + print('File %s does not exist' % f) + + for sha in data: + if is_gmail and len(data[sha]) > 1: + messages.append(pick_all_mail(data[sha])) + else: + messages.append(data[sha][0]) + + for m in messages: + if not m: + continue + + target = os.path.join(dest_box, 'cur', os.path.basename(m)) + if not os.path.exists(target): + os.symlink(m, target) + + +if __name__ == '__main__': + p = OptionParser("usage: %prog [OPTIONS] [RESULTDIR]") + p.add_option('-g', '--gmail', dest='gmail', + action='store_true', default=True, + help='gmail-specific behavior') + p.add_option('-G', '--not-gmail', dest='gmail', + action='store_false', + help='Normal, non-gmail-specific behavior') + p.add_option('-p', '--base-path', dest='base_path', + help='Only include messages in given base path') + p.add_option('--history-path', dest='history_path', + help='Save/restore query history to given path') + p.add_option('-v', '--version', dest='version', action='store_true', + help='Show version') + (options, args) = p.parse_args() + + if args: + dest = args[0] + else: + dest = '~/.cache/mutt_results' + + if options.version: + print(VERSION) + sys.exit(0) + + try: + main(normalize(dest), options) + except KeyboardInterrupt: + pass diff --git a/templates/.bin/mvi b/templates/.bin/mvi new file mode 100755 index 0000000..b2e333f --- /dev/null +++ b/templates/.bin/mvi @@ -0,0 +1,84 @@ +#!/bin/sh +# +# This shell script passes all its arguments to the binary inside the +# MacVim.app application bundle. If you make links to this script as view, +# gvim, etc., then it will peek at the name used to call it and set options +# appropriately. +# +# Based on a script by Wout Mertens and suggestions from Laurent Bihanic. This +# version is the fault of Benji Fisher, 16 May 2005 (with modifications by Nico +# Weber and Bjorn Winckler, Aug 13 2007). +# First, check "All the Usual Suspects" for the location of the Vim.app bundle. +# You can short-circuit this by setting the VIM_APP_DIR environment variable +# or by un-commenting and editing the following line: +# VIM_APP_DIR=/Applications + +if [ -z "$VIM_APP_DIR" ] +then + myDir="`dirname "$0"`" + myAppDir="$myDir/../Applications" + suspects=( + /Applications + ~/Applications + /Applications/vim + ~/Applications/vim + $myDir + $myDir/vim + $myAppDir + $myAppDir/vim + /Applications/Utilities + /Applications/Utilities/vim + ) + for i in ${suspects[@]}; do + if [ -x "$i/MacVim.app" ]; then + VIM_APP_DIR="$i" + break + fi + done +fi +if [ -z "$VIM_APP_DIR" ] +then + echo "Sorry, cannot find MacVim.app. Try setting the VIM_APP_DIR environment variable to the directory containing MacVim.app." + exit 1 +fi +binary="$VIM_APP_DIR/MacVim.app/Contents/MacOS/Vim" + +# Next, peek at the name used to invoke this script, and set options +# accordingly. + +name="`basename "$0"`" +gui= +opts= + +# GUI mode, implies forking +case "$name" in m*|g*|rm*|rg*) gui=true ;; esac + +# Restricted mode +case "$name" in r*) opts="$opts -Z";; esac + +# vimdiff, view, and ex mode +case "$name" in + *vimdiff) + opts="$opts -dO" + ;; + *view) + opts="$opts -R" + ;; + *ex) + opts="$opts -e" + ;; +esac + +# Last step: fire up vim. +# The program should fork by default when started in GUI mode, but it does +# not; we work around this when this script is invoked as "gvim" or "rgview" +# etc., but not when it is invoked as "vim -g". +if [ "$gui" ]; then + # Note: this isn't perfect, because any error output goes to the + # terminal instead of the console log. + # But if you use open instead, you will need to fully qualify the + # path names for any filenames you specify, which is hard. + exec "$binary" -g $opts ${1:+"$@"} +else + exec "$binary" $opts ${1:+"$@"} +fi diff --git a/templates/.bin/psqlenv b/templates/.bin/psqlenv new file mode 100755 index 0000000..61fd843 --- /dev/null +++ b/templates/.bin/psqlenv @@ -0,0 +1,7 @@ +#!/bin/sh + +dbname="DATABASE_URL" +if [ $# -ne 0 ]; then + dbname=$1 +fi +psql `grep "^$dbname=" -m 1 < .env | cut -d'=' -f2 | sed 's/"//g'` diff --git a/templates/.bin/pwrman b/templates/.bin/pwrman new file mode 100755 index 0000000..ef0823b --- /dev/null +++ b/templates/.bin/pwrman @@ -0,0 +1,20 @@ +#!/usr/bin/env zsh + +dmenu_fn=Roboto +dmenu_nb="#0e2133" +dmenu_nf="#e6e0cf" +dmenu_sb="#7390bf" +dmenu_sf="#0e2133" + +menu() { + dmenu -fn "$dmenu_fn" -nf "$dmenu_nf" -nb "$dmenu_nb" -sb "$dmenu_sb" -sf "$dmenu_sf" -p "$1" +} + +action=$(echo "lock screen\nreboot\nshutdown" | menu "Action:") +if [[ "$action" == "lock screen" ]]; then + i3lock-fancy -- scrot -z +elif [[ "$action" == "reboot" ]]; then + i3-nagbar -t warning -m "Are you sure you want to reboot?" -B "Reboot" "reboot" +elif [[ "$action" == "shutdown" ]]; then + i3-nagbar -t warning -m "Are you sure you want to shut down?" -B "Shut Down" "sudo shutdown -h now" +fi diff --git a/templates/.bin/randombg b/templates/.bin/randombg new file mode 100755 index 0000000..ebcb2ae --- /dev/null +++ b/templates/.bin/randombg @@ -0,0 +1,3 @@ +#!/usr/bin/env zsh + +feh --randomize --bg-fill $HOME/.wallpaper/* diff --git a/templates/.bin/randword b/templates/.bin/randword new file mode 100755 index 0000000..3bf5bd8 --- /dev/null +++ b/templates/.bin/randword @@ -0,0 +1,6 @@ +#!/bin/sh + +wf=/usr/share/dict/words +total_words=`wc -l $wf | tr -d ' ' | cut -d'/' -f1` +ln=`python3 -c "import secrets; print(secrets.randbelow($total_words))"` +tail -n $ln $wf | head -n 1 diff --git a/templates/.bin/rev_dns b/templates/.bin/rev_dns new file mode 100755 index 0000000..604774c --- /dev/null +++ b/templates/.bin/rev_dns @@ -0,0 +1,7 @@ +#!/bin/bash + +if [[ "$#" != "1" ]]; then + echo "usage: $0 <hostname>" +else + dig +short "$1" | awk '/^([0-9]{1,3}\.){3}[0-9]{1,3}$/{print $0}' | xargs -I _ dig +short -x _ +fi diff --git a/templates/.bin/rfc b/templates/.bin/rfc new file mode 100755 index 0000000..293dc56 --- /dev/null +++ b/templates/.bin/rfc @@ -0,0 +1,3 @@ +#!/bin/sh + +nvim +":RFC $@" diff --git a/templates/.bin/rot13 b/templates/.bin/rot13 new file mode 100755 index 0000000..c72f41e --- /dev/null +++ b/templates/.bin/rot13 @@ -0,0 +1,18 @@ +#!/bin/sh + +offset=${1:-13} + +if [ "$offset" -lt 1 ]; then + echo "offset must be greater than zero" >&2 + exit 1 +elif [ "$offset" -gt 25 ]; then + echo "offset must be less than 26" >&2 + exit 1 +fi + +alphabet=aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ +sub1=$(echo "$alphabet" | cut -c $((offset * 2 + 1))-) +sub2=$(echo "$alphabet" | cut -c 1-$((offset * 2))) +sub=$sub1$sub2 + +tr "$alphabet" "$sub" diff --git a/templates/.bin/setbg.sh b/templates/.bin/setbg.sh new file mode 100755 index 0000000..14abb30 --- /dev/null +++ b/templates/.bin/setbg.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +feh --bg-fill "$1" diff --git a/templates/.bin/taf b/templates/.bin/taf new file mode 100755 index 0000000..9564b95 --- /dev/null +++ b/templates/.bin/taf @@ -0,0 +1,11 @@ +#!/bin/bash + +jq="/usr/bin/jq" +if [[ ! -x "$jq" && -x "/usr/local/bin/jq" ]]; then + jq="/usr/local/bin/jq" +fi + +station=$(echo -n "$1" | tr "a-z" "A-Z") +json=$(curl -s "https://avwx.rest/api/taf/${station:-KBOS}") +echo "$json" | "$jq" --raw-output '.["Raw-Report"]' 2>&1 + |