aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--src/main.c309
1 files changed, 154 insertions, 155 deletions
diff --git a/src/main.c b/src/main.c
index 463996444..154694461 100644
--- a/src/main.c
+++ b/src/main.c
@@ -795,175 +795,174 @@ static void help(void)
static const char * const helptext[]={
"Usage: curl [options...] <url>",
"Options: (H) means HTTP/HTTPS only, (F) means FTP only",
- " --anyauth Pick \"any\" authentication method (H)",
- " -a/--append Append to target file when uploading (F/SFTP)",
- " --basic Use HTTP Basic Authentication (H)",
- " --cacert <file> CA certificate to verify peer against (SSL)",
- " --capath <directory> CA directory to verify peer against (SSL)",
- " -E/--cert <cert[:passwd]> Client certificate file and password (SSL)",
- " --cert-type <type> Certificate file type (DER/PEM/ENG) (SSL)",
- " --ciphers <list> SSL ciphers to use (SSL)",
- " --compressed Request compressed response (using deflate or gzip)",
- " -K/--config <file> Specify which config file to read",
- " --connect-timeout <seconds> Maximum time allowed for connection",
- " -C/--continue-at <offset> Resumed transfer offset",
- " -b/--cookie <name=string/file> String or file to read cookies from (H)",
- " -c/--cookie-jar <file> Write cookies to this file after operation (H)",
- " --create-dirs Create necessary local directory hierarchy",
- " --crlf Convert LF to CRLF in upload",
- " --crlfile <file> Get a CRL list in PEM format from the given file",
- " -d/--data <data> HTTP POST data (H)",
- " --data-ascii <data> HTTP POST ASCII data (H)",
- " --data-binary <data> HTTP POST binary data (H)",
- " --data-urlencode <name=data/name@filename> "
- "HTTP POST data url encoded (H)",
- " --digest Use HTTP Digest Authentication (H)",
- " --disable-eprt Inhibit using EPRT or LPRT (F)",
- " --disable-epsv Inhibit using EPSV (F)",
- " -D/--dump-header <file> Write the headers to this file",
- " --egd-file <file> EGD socket path for random data (SSL)",
- " --engine <eng> Crypto engine (SSL). \"--engine list\" for list",
+ " --anyauth Pick \"any\" authentication method (H)",
+ " -a, --append Append to target file when uploading (F/SFTP)",
+ " --basic Use HTTP Basic Authentication (H)",
+ " --cacert FILE CA certificate to verify peer against (SSL)",
+ " --capath DIR CA directory to verify peer against (SSL)",
+ " -E, --cert CERT[:PASSWD] Client certificate file and password (SSL)",
+ " --cert-type TYPE Certificate file type (DER/PEM/ENG) (SSL)",
+ " --ciphers LIST SSL ciphers to use (SSL)",
+ " --compressed Request compressed response (using deflate or gzip)",
+ " -K, --config FILE Specify which config file to read",
+ " --connect-timeout SECONDS Maximum time allowed for connection",
+ " -C, --continue-at OFFSET Resumed transfer offset",
+ " -b, --cookie STRING/FILE String or file to read cookies from (H)",
+ " -c, --cookie-jar FILE Write cookies to this file after operation (H)",
+ " --create-dirs Create necessary local directory hierarchy",
+ " --crlf Convert LF to CRLF in upload",
+ " --crlfile FILE Get a CRL list in PEM format from the given file",
+ " -d, --data DATA HTTP POST data (H)",
+ " --data-ascii DATA HTTP POST ASCII data (H)",
+ " --data-binary DATA HTTP POST binary data (H)",
+ " --data-urlencode DATA HTTP POST data url encoded (H)",
+ " --digest Use HTTP Digest Authentication (H)",
+ " --disable-eprt Inhibit using EPRT or LPRT (F)",
+ " --disable-epsv Inhibit using EPSV (F)",
+ " -D, --dump-header FILE Write the headers to this file",
+ " --egd-file FILE EGD socket path for random data (SSL)",
+ " --engine ENGINGE Crypto engine (SSL). \"--engine list\" for list",
#ifdef USE_ENVIRONMENT
- " --environment Write results to environment variables (RISC OS)",
+ " --environment Write results to environment variables (RISC OS)",
#endif
- " -f/--fail Fail silently (no output at all) on HTTP errors (H)",
- " -F/--form <name=content> Specify HTTP multipart POST data (H)",
- " --form-string <name=string> Specify HTTP multipart POST data (H)",
- " --ftp-account <data> Account data string (F)",
- " --ftp-alternative-to-user <cmd> "
+ " -f, --fail Fail silently (no output at all) on HTTP errors (H)",
+ " -F, --form CONTENT Specify HTTP multipart POST data (H)",
+ " --form-string STRING Specify HTTP multipart POST data (H)",
+ " --ftp-account DATA Account data string (F)",
+ " --ftp-alternative-to-user COMMAND "
"String to replace \"USER [name]\" (F)",
- " --ftp-create-dirs Create the remote dirs if not present (F)",
- " --ftp-method [multicwd/nocwd/singlecwd] Control CWD usage (F)",
- " --ftp-pasv Use PASV/EPSV instead of PORT (F)",
- " -P/--ftp-port <address> Use PORT with address instead of PASV (F)",
- " --ftp-skip-pasv-ip Skip the IP address for PASV (F)\n"
- " --ftp-pret Send PRET before PASV (for drftpd) (F)",
- " --ftp-ssl-ccc Send CCC after authenticating (F)",
- " --ftp-ssl-ccc-mode [active/passive] Set CCC mode (F)",
- " --ftp-ssl-control Require SSL/TLS for ftp login, "
+ " --ftp-create-dirs Create the remote dirs if not present (F)",
+ " --ftp-method [MULTICWD/NOCWD/SINGLECWD] Control CWD usage (F)",
+ " --ftp-pasv Use PASV/EPSV instead of PORT (F)",
+ " -P, --ftp-port ADR Use PORT with given address instead of PASV (F)",
+ " --ftp-skip-pasv-ip Skip the IP address for PASV (F)\n"
+ " --ftp-pret Send PRET before PASV (for drftpd) (F)",
+ " --ftp-ssl-ccc Send CCC after authenticating (F)",
+ " --ftp-ssl-ccc-mode ACTIVE/PASSIVE Set CCC mode (F)",
+ " --ftp-ssl-control Require SSL/TLS for ftp login, "
"clear for transfer (F)",
- " -G/--get Send the -d data with a HTTP GET (H)",
- " -g/--globoff Disable URL sequences and ranges using {} and []",
- " -H/--header <line> Custom header to pass to server (H)",
- " -I/--head Show document info only",
- " -h/--help This help text",
- " --hostpubmd5 <md5> "
+ " -G, --get Send the -d data with a HTTP GET (H)",
+ " -g, --globoff Disable URL sequences and ranges using {} and []",
+ " -H, --header LINE Custom header to pass to server (H)",
+ " -I, --head Show document info only",
+ " -h, --help This help text",
+ " --hostpubmd5 MD5 "
"Hex encoded MD5 string of the host public key. (SSH)",
- " -0/--http1.0 Use HTTP 1.0 (H)",
- " --ignore-content-length Ignore the HTTP Content-Length header",
- " -i/--include Include protocol headers in the output (H/F)",
- " -k/--insecure Allow connections to SSL sites without certs (H)",
- " --interface <interface> Specify network interface/address to use",
- " -4/--ipv4 Resolve name to IPv4 address",
- " -6/--ipv6 Resolve name to IPv6 address",
- " -j/--junk-session-cookies Ignore session cookies read from file (H)",
- " --keepalive-time <seconds> Interval between keepalive probes",
- " --key <key> Private key file name (SSL/SSH)",
- " --key-type <type> Private key file type (DER/PEM/ENG) (SSL)",
- " --krb <level> Enable Kerberos with specified security level (F)",
- " --libcurl <file> Dump libcurl equivalent code of this command line",
- " --limit-rate <rate> Limit transfer speed to this rate",
- " -J/--remote-header-name Use the header-provided filename (H)",
- " -l/--list-only List only names of an FTP directory (F)",
- " --local-port <num>[-num] Force use of these local port numbers",
- " -L/--location Follow Location: hints (H)",
- " --location-trusted Follow Location: and send auth to other hosts (H)",
- " -M/--manual Display the full manual",
- " --mail-from <from> Mail from this address",
- " --mail-rcpt <to> Mail to this receiver(s)",
- " --max-filesize <bytes> Maximum file size to download (H/F)",
- " --max-redirs <num> Maximum number of redirects allowed (H)",
- " -m/--max-time <seconds> Maximum time allowed for the transfer",
- " --negotiate Use HTTP Negotiate Authentication (H)",
- " -n/--netrc Must read .netrc for user name and password",
- " --netrc-optional Use either .netrc or URL; overrides -n",
- " --netrc-file <file> Set up the netrc filename to use",
- " -N/--no-buffer Disable buffering of the output stream",
- " --no-keepalive Disable keepalive use on the connection",
- " --no-sessionid Disable SSL session-ID reusing (SSL)",
- " --noproxy Comma-separated list of hosts which do not use proxy",
- " --ntlm Use HTTP NTLM authentication (H)",
- " -o/--output <file> Write output to <file> instead of stdout",
- " --pass <pass> Pass phrase for the private key (SSL/SSH)",
- " --post301 "
+ " -0, --http1.0 Use HTTP 1.0 (H)",
+ " --ignore-content-length Ignore the HTTP Content-Length header",
+ " -i, --include Include protocol headers in the output (H/F)",
+ " -k, --insecure Allow connections to SSL sites without certs (H)",
+ " --interface INTERFACE Specify network interface/address to use",
+ " -4, --ipv4 Resolve name to IPv4 address",
+ " -6, --ipv6 Resolve name to IPv6 address",
+ " -j, --junk-session-cookies Ignore session cookies read from file (H)",
+ " --keepalive-time SECONDS Interval between keepalive probes",
+ " --key KEY Private key file name (SSL/SSH)",
+ " --key-type TYPE Private key file type (DER/PEM/ENG) (SSL)",
+ " --krb LEVEL Enable Kerberos with specified security level (F)",
+ " --libcurl FILE Dump libcurl equivalent code of this command line",
+ " --limit-rate RATE Limit transfer speed to this rate",
+ " -l, --list-only List only names of an FTP directory (F)",
+ " --local-port RANGE Force use of these local port numbers",
+ " -L, --location Follow redirects (H)",
+ " --location-trusted like --location and send auth to other hosts (H)",
+ " -M, --manual Display the full manual",
+ " --mail-from FROM Mail from this address",
+ " --mail-rcpt TO Mail to this receiver(s)",
+ " --max-filesize BYTES Maximum file size to download (H/F)",
+ " --max-redirs NUM Maximum number of redirects allowed (H)",
+ " -m, --max-time SECONDS Maximum time allowed for the transfer",
+ " --negotiate Use HTTP Negotiate Authentication (H)",
+ " -n, --netrc Must read .netrc for user name and password",
+ " --netrc-optional Use either .netrc or URL; overrides -n",
+ " --netrc-file FILE Set up the netrc filename to use",
+ " -N, --no-buffer Disable buffering of the output stream",
+ " --no-keepalive Disable keepalive use on the connection",
+ " --no-sessionid Disable SSL session-ID reusing (SSL)",
+ " --noproxy List of hosts which do not use proxy",
+ " --ntlm Use HTTP NTLM authentication (H)",
+ " -o, --output FILE Write output to <file> instead of stdout",
+ " --pass PASS Pass phrase for the private key (SSL/SSH)",
+ " --post301 "
"Do not switch to GET after following a 301 redirect (H)",
- " --post302 "
+ " --post302 "
"Do not switch to GET after following a 302 redirect (H)",
- " -#/--progress-bar Display transfer progress as a progress bar",
- " --proto <protocols> Enable/disable specified protocols",
- " --proto-redir <protocols> "
+ " -#, --progress-bar Display transfer progress as a progress bar",
+ " --proto PROTOCOLS Enable/disable specified protocols",
+ " --proto-redir PROTOCOLS "
"Enable/disable specified protocols on redirect",
- " -x/--proxy <host[:port]> Use HTTP proxy on given port",
- " --proxy-anyauth Pick \"any\" proxy authentication method (H)",
- " --proxy-basic Use Basic authentication on the proxy (H)",
- " --proxy-digest Use Digest authentication on the proxy (H)",
- " --proxy-negotiate Use Negotiate authentication on the proxy (H)",
- " --proxy-ntlm Use NTLM authentication on the proxy (H)",
- " -U/--proxy-user <user[:password]> Set proxy user and password",
- " --proxy1.0 <host[:port]> Use HTTP/1.0 proxy on given port",
- " -p/--proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)",
- " --pubkey <key> Public key file name (SSH)",
- " -Q/--quote <cmd> Send command(s) to server before transfer (F/SFTP)",
- " --random-file <file> File for reading random data from (SSL)",
- " -r/--range <range> Retrieve only the bytes within a range",
- " --raw Pass HTTP \"raw\", without any transfer decoding (H)",
- " -e/--referer Referer URL (H)",
- " -O/--remote-name Write output to a file named as the remote file",
- " --remote-name-all Use the remote file name for all URLs",
- " -R/--remote-time Set the remote file's time on the local output",
- " -X/--request <command> Specify request command to use",
- " --resolve <host:port:address> Force resolve of HOST:PORT to ADDRESS",
- " --retry <num> "
- "Retry request <num> times if transient problems occur",
- " --retry-delay <seconds> "
+ " -x, --proxy [PROTOCOL://]HOST[:PORT] Use proxy on given port",
+ " --proxy-anyauth Pick \"any\" proxy authentication method (H)",
+ " --proxy-basic Use Basic authentication on the proxy (H)",
+ " --proxy-digest Use Digest authentication on the proxy (H)",
+ " --proxy-negotiate Use Negotiate authentication on the proxy (H)",
+ " --proxy-ntlm Use NTLM authentication on the proxy (H)",
+ " -U, --proxy-user USER[:PASSWORD] Proxy user and password",
+ " --proxy1.0 HOST[:PORT] Use HTTP/1.0 proxy on given port",
+ " -p, --proxytunnel Operate through a HTTP proxy tunnel (using CONNECT)",
+ " --pubkey KEY Public key file name (SSH)",
+ " -Q, --quote CMD Send command(s) to server before transfer (F/SFTP)",
+ " --random-file FILE File for reading random data from (SSL)",
+ " -r, --range RANGE Retrieve only the bytes within a range",
+ " --raw Do HTTP \"raw\", without any transfer decoding (H)",
+ " -e, --referer Referer URL (H)",
+ " -J, --remote-header-name Use the header-provided filename (H)",
+ " -O, --remote-name Write output to a file named as the remote file",
+ " --remote-name-all Use the remote file name for all URLs",
+ " -R, --remote-time Set the remote file's time on the local output",
+ " -X, --request COMMAND Specify request command to use",
+ " --resolve HOST:PORT:ADDRESS Force resolve of HOST:PORT to ADDRESS",
+ " --retry NUM "
+ "Retry request NUM times if transient problems occur",
+ " --retry-delay SECONDS "
"When retrying, wait this many seconds between each",
- " --retry-max-time <seconds> Retry only within this period",
- " -S/--show-error "
+ " --retry-max-time SECONDS Retry only within this period",
+ " -S, --show-error "
"Show error. With -s, make curl show errors when they occur",
- " -s/--silent Silent mode. Don't output anything",
- " --socks4 <host[:port]> SOCKS4 proxy on given host + port",
- " --socks4a <host[:port]> SOCKS4a proxy on given host + port",
- " --socks5 <host[:port]> SOCKS5 proxy on given host + port",
- " --socks5-hostname <host[:port]> "
+ " -s, --silent Silent mode. Don't output anything",
+ " --socks4 HOST[:PORT] SOCKS4 proxy on given host + port",
+ " --socks4a HOST[:PORT] SOCKS4a proxy on given host + port",
+ " --socks5 HOST[:PORT] SOCKS5 proxy on given host + port",
+ " --socks5-hostname HOST[:PORT] "
"SOCKS5 proxy, pass host name to proxy",
#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI)
- " --socks5-gssapi-service <name> SOCKS5 proxy service name for gssapi",
- " --socks5-gssapi-nec Compatibility with NEC SOCKS5 server",
+ " --socks5-gssapi-service NAME SOCKS5 proxy service name for gssapi",
+ " --socks5-gssapi-nec Compatibility with NEC SOCKS5 server",
#endif
- " -Y/--speed-limit "
- "Stop transfer if below speed-limit for 'speed-time' secs",
- " -y/--speed-time "
- "Time needed to trig speed-limit abort. Defaults to 30",
- " --ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)",
- " --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)",
- " -2/--sslv2 Use SSLv2 (SSL)",
- " -3/--sslv3 Use SSLv3 (SSL)",
- " --stderr <file> Where to redirect stderr. - means stdout",
- " --tcp-nodelay Use the TCP_NODELAY option",
- " -t/--telnet-option <OPT=val> Set telnet option",
- " --tftp-blksize <value> Set TFTP BLKSIZE option (must be >512)",
- " -z/--time-cond <time> Transfer based on a time condition",
- " -1/--tlsv1 Use TLSv1 (SSL)",
- " --trace <file> Write a debug trace to the given file",
- " --trace-ascii <file> Like --trace but without the hex output",
- " --trace-time Add time stamps to trace/verbose output",
- " --tr-encoding Request compressed transfer encoding (H)",
- " -T/--upload-file <file> Transfer <file> to remote site",
- " --url <URL> Set URL to work with",
- " -B/--use-ascii Use ASCII/text transfer",
- " -u/--user <user[:password]> Set server user and password",
- " --tlsuser <user> Set TLS username",
- " --tlspassword <string> Set TLS password",
- " --tlsauthtype <string> Set TLS authentication type (default SRP)",
- " -A/--user-agent <string> User-Agent to send to server (H)",
- " -v/--verbose Make the operation more talkative",
- " -V/--version Show version number and quit",
+ " -Y, --speed-limit RATE "
+ "Stop transfers below speed-limit for 'speed-time' secs",
+ " -y, --speed-time SECONDS "
+ "Time for trig speed-limit abort. Defaults to 30",
+ " --ssl Try SSL/TLS (FTP, IMAP, POP3, SMTP)",
+ " --ssl-reqd Require SSL/TLS (FTP, IMAP, POP3, SMTP)",
+ " -2, --sslv2 Use SSLv2 (SSL)",
+ " -3, --sslv3 Use SSLv3 (SSL)",
+ " --stderr FILE Where to redirect stderr. - means stdout",
+ " --tcp-nodelay Use the TCP_NODELAY option",
+ " -t, --telnet-option OPT=VAL Set telnet option",
+ " --tftp-blksize VALUE Set TFTP BLKSIZE option (must be >512)",
+ " -z, --time-cond TIME Transfer based on a time condition",
+ " -1, --tlsv1 Use TLSv1 (SSL)",
+ " --trace FILE Write a debug trace to the given file",
+ " --trace-ascii FILE Like --trace but without the hex output",
+ " --trace-time Add time stamps to trace/verbose output",
+ " --tr-encoding Request compressed transfer encoding (H)",
+ " -T, --upload-file FILE Transfer FILE to destination",
+ " --url URL URL to work with",
+ " -B, --use-ascii Use ASCII/text transfer",
+ " -u, --user USER[:PASSWORD] Server user and password",
+ " --tlsuser USER TLS username",
+ " --tlspassword STRING TLS password",
+ " --tlsauthtype STRING TLS authentication type (default SRP)",
+ " -A, --user-agent STRING User-Agent to send to server (H)",
+ " -v, --verbose Make the operation more talkative",
+ " -V, --version Show version number and quit",
#ifdef USE_WATT32
- " --wdebug Turn on Watt-32 debugging",
+ " --wdebug Turn on Watt-32 debugging",
#endif
- " -w/--write-out <format> What to output after completion",
- " --xattr Store metadata in extended file attributes",
+ " -w, --write-out FORMAT What to output after completion",
+ " --xattr Store metadata in extended file attributes",
" -q If used as the first parameter disables .curlrc",
NULL
};
@@ -3166,7 +3165,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
GetStr(&config->trace_dump, (char *)"%");
if(config->tracetype && (config->tracetype != TRACE_PLAIN))
warnf(config,
- "-v/--verbose overrides an earlier trace/verbose option\n");
+ "-v, --verbose overrides an earlier trace/verbose option\n");
config->tracetype = TRACE_PLAIN;
}
else
@@ -3299,7 +3298,7 @@ static ParameterError getparameter(char *flag, /* f or -long-flag */
/* failed, remove time condition */
config->timecond = CURL_TIMECOND_NONE;
warnf(config,
- "Illegal date format for -z/--timecond (and not "
+ "Illegal date format for -z, --timecond (and not "
"a file name). Disabling time condition. "
"See curl_getdate(3) for valid date syntax.\n");
}