diff options
Diffstat (limited to 'CHANGES')
| -rw-r--r-- | CHANGES | 1711 |
1 files changed, 0 insertions, 1711 deletions
@@ -635,1714 +635,3 @@ Yang Tse (13 Nov 2008) - Refactored configure script detection of functions used to set sockets into non-blocking mode, and decouple function detection from function capability. -Version 7.19.2 (13 November 2008) - -Michal Marek (13 Nov 2008) -- Fixed a potential data loss in Curl_client_write() when the transfer is - paused. - -Daniel Stenberg (11 Nov 2008) -- Rainer Canavan filed bug #2255627 - (http://curl.haxx.se/bug/view.cgi?id=2255627) which pointed out that a - program using libcurl's multi interface to download a HTTPS page with a - libcurl built powered by OpenSSL, would easily get silly and instead hand - over SSL details as data instead of the actual HTTP headers and body. This - happened because libcurl would consider the connection handshake done too - early. This problem was introduced at September 22nd 2008 with my fix of the - bug #2107377 - - The correct fix is now instead done within the GnuTLS-handling code, as both - the OpenSSL and the NSS code already deal with this situation in similar - fashion. I added test case 560 in an attempt to verify this fix, but - unfortunately it didn't trigger it even before this fix! - -Yang Tse (11 Nov 2008) -- Related with bug #2230535 (http://curl.haxx.se/bug/view.cgi?id=2230535) - Daniel Fandrich noticed that curl_addrinfo was also missing in the build - process of other four non-configure platforms. Added now. - -Daniel Fandrich (7 Nov 2008) -- The getifaddrs() version of Curl_if2ip() crashed when used on a Linux - system with a TEQL load-balancing device configured, which doesn't - have an address. Thanks to Adam Sampson for spotting this (bug #2234923). - -Yang Tse (6 Nov 2008) -- Merged existing IPv4 and IPv6 Curl_ip2addr functions into a single one - which now also takes a protocol address family argument. - -- Bug #2230535 (http://curl.haxx.se/bug/view.cgi?id=2230535) pointed out a - problem with MSVC 6 makefile that caused a build failure. It was noted that - the curl_addrinfo.obj reference was missing. I took the opportunity to sort - the list in which this was missing. Issue submitted by John Wilkinson. - -Version 7.19.1 (5 November 2008) - -Daniel Stenberg (4 Nov 2008) -- CURLINFO_FILETIME now works for file:// transfers as well - -Daniel Stenberg (3 Nov 2008) -- Bug #2218480 (http://curl.haxx.se/bug/view.cgi?id=2218480) pointed out a - problem with my CURLINFO_PRIMARY_IP fix from October 7th that caused a NULL - pointer read. I also took the opportunity to clean up this logic (storing of - the connection's IP address) somewhat as we had it stored in two different - places and ways previously and they are now unified. - -Yang Tse (3 Nov 2008) -- Fix undersized IPv6 address internal buffer. IPv6 address strings longer - than 35 characters would be truncated. - -Daniel Stenberg (2 Nov 2008) -- Daniel Johnson reported and fixed: - - When c-ares isn't enabled, libcurl by default calls getaddrinfo with family - set to PF_UNSPEC which causes getaddrinfo to return all available addresses, - both IPv4 and IPv6. Libcurl then tries each one until it can connect. If the - net connection doesn't support IPv6, libcurl can still fall back to IPv4. - - However, since c-ares doesn't support PF_UNSPEC, when it's used it defaults - to using family=PF_INET6 and therefore only returns IPv6 addresses when AAAA - records are available, even if IPv4 addresses are also available. The effect - is that since my ISP doesn't do IPv6, libcurl can't connect at all to a site - that has AAAA records. It will work if I explicitly use CURL_IPRESOLVE_V4 or - --ipv4 with the curl tool. I discovered this when curl would fail to connect - to seemingly random sites. It turns out they weren't random, they were sites - with AAAA records. - - So now libcurl defaults to PF_INET... until c-ares has been tought to offer - both. - -Yang Tse (31 Oct 2008) -- Tests 558 and 559 are stabilized. These two tests were initially introduced - to aid in the location of a seg-fault which was only triggered on non-debug - builds done with the icc 9.1 Intel compiler. Test 558 does not trigger the - problem, but test 559 does trigger it. As of today, it isn't yet absolutely - clear if it is a compiler optimizer issue or a memory corruption one. - -Yang Tse (30 Oct 2008) -- Use our Curl_addrinfo structure definition to handle address info data even - when a system addrinfo struct is available. Provide and use a wrapper around - systems getaddrinfo function, Curl_getaddrinfo_ex which returns a pointer to - a list of dynamically allocated Curl_addrinfo structs. - - Configure will check freeaddrinfo and getaddrinfo functions and define - preprocessor symbols HAVE_FREEADDRINFO and HAVE_GETADDRINFO when appropriate. - -Daniel Fandrich (29 Oct 2008) -- Fixed a bug that caused a few bytes of garbage to be sent after a - curl_easy_pause() during a chunky upload. Reported by Steve Roskowski. - -Daniel Fandrich (28 Oct 2008) -- Changed the "resolve" test precheck program to verify that an IPv6 socket - can be created before resolving the IPv6 name. In the context of running - a test, it doesn't make sense to run an IPv6 test when a host is resolvable - but IPv6 isn't usable. This should fix failures of test 1085 on hosts with - library and DNS support for IPv6 but where actual use of IPv6 has been - administratively disabled. - -Daniel Fandrich (24 Oct 2008) -- Added experimental support for zlib and OpenSSL on Symbian OS. - -Daniel Fandrich (21 Oct 2008) -- Fixed some problems with SFTP range support to fix test cases 634 through - 637. - -Daniel Fandrich (17 Oct 2008) -- Fixed a compile error reported by Albert Chin on AIX and IRIX when using - GTLS. - -Daniel Stenberg (16 Oct 2008) -- Igor Novoseltsev added CURLOPT_PROXYUSER and CURLOPT_PROXYPASSWORD that then - make CURLOPT_PROXYUSERPWD sort of deprecated. The primary motive for adding - these new options is that they have no problems with the colon separator - that the CURLOPT_PROXYUSERPWD option does. - -Daniel Stenberg (15 Oct 2008) -- Pascal Terjan filed bug #2154627 - (http://curl.haxx.se/bug/view.cgi?id=2154627) which pointed out that libcurl - uses strcasecmp() in multiple places where it causes failures when the - Turkish locale is used. This is because 'i' and 'I' isn't the same letter so - strcasecmp() on those letters are different in Turkish than in English (or - just about all other languages). I thus introduced a totally new internal - function in libcurl (called Curl_raw_equal) for doing case insentive - comparisons for english-(ascii?) style strings that thus will make "file" - and "FILE" match even if the Turkish locale is selected. - -Daniel Fandrich (15 Oct 2008) -- A <precheck> command is considered to have failed if it returns a non-zero - return code. This way, if the precheck command can't be run at all for - whatever reason, it's treated as a precheck failure which causes the - test to be skipped. - -Daniel Stenberg (15 Oct 2008) -- John Wilkinson filed bug #2155496 - (http://curl.haxx.se/bug/view.cgi?id=2155496) pointing out an error case - without a proper human-readable error message. When a read callback returns - a too large value (like when trying to return a negative number) it would - trigger and the generic error message then makes the proplem slightly - different to track down. I've added an error message for this now. - -Daniel Fandrich (9 Oct 2008) -- Fixed the --interface option to work with IPv6 connections on glibc - systems supporting getifaddrs(). Also fixed a problem where an IPv6 - address could be chosen instead of an IPv4 one for --interface when it - involved a name lookup. - -Daniel Fandrich (8 Oct 2008) -- Added tests 1082 through 1085 to test symbolic --interface parameters - -- Added tests 633 through 637 to test the new file range support for SFTP. - All but the first test cause an infinite loop or other failure and so - are added to DISABLED. - -Daniel Stenberg (8 Oct 2008) -- John Wilkinson filed bug #2152270 - (http://curl.haxx.se/bug/view.cgi?id=2152270) which identified and fixed a - CURLINFO_REDIRECT_URL memory leak and an additional wrong-doing: - - Any subsequent transfer with a redirect leaks memory, eventually crashing - the process potentially. - - Any subsequent transfer WITHOUT a redirect causes the most recent redirect - that DID occur on some previous transfer to still be reported. - -- Igor Novoseltsev filed bug #2111613 - (http://curl.haxx.se/bug/view.cgi?id=2111613) that eventually identified a - flaw in how the multi_socket interface in some cases missed to call the - timeout callback when easy interfaces are removed and added within the same - millisecond. - -- Igor Novoseltsev brought a patch that introduced two new options to - curl_easy_setopt: CURLOPT_USERNAME and CURLOPT_PASSWORD that sort of - deprecates the good old CURLOPT_USERPWD since they allow applications to set - the user name and password independently and perhaps more importantly allow - both to contain colon(s) which CURLOPT_USERPWD doesn't fully support. - -Daniel Fandrich (7 Oct 2008) -- Changed the handling of read/write errors in Curl_perform() to allow a - a fresh connection to be made in such cases and the request retransmitted. - This should fix test case 160. Added test case 1079 in an attempt to - test a similar connection dropping scenario, but as a race condition, it's - hard to test reliably. - -- Created test cases 1080 and 1081 to reproduce a problem of - CURLINFO_REDIRECT_URL leaking memory and returning incorrect results when - two URLs are requested. Reported by vmpdemo in bug #2152270 - -Daniel Stenberg (7 Oct 2008) -- Fixed CURLINFO_PRIMARY_IP: When libcurl created a connection to host A then - the app re-used the handle to do a connection to host B and then again - re-used the handle to host A, it would not update the info with host A's IP - address (due to the connection being re-used) but it would instead report - the info from host B. - -Yang Tse (7 Oct 2008) -- Added --enable-optimize configure option to enable and disable compiler - optimizations to allow decoupled setting from --enable-debug. - -Yang Tse (2 Oct 2008) -- Added --enable-warnings configure option to enable and disable strict - compiler warnings to allow decoupled setting from --enable-debug. - - runtests.pl will now run with picky compiler warnings enabled unless - explicitly disabled. - -Daniel Fandrich (1 Oct 2008) -- "make clean" now cleans out the docs and tests directories, too. - -Daniel Stenberg (30 Sep 2008) -- The libcurl FTP code now returns CURLE_REMOTE_FILE_NOT_FOUND error when SIZE - gets a 550 response back for the cases where a download (or NOBODY) is - wanted. It still allows a 550 as response if the SIZE is used as part of an - upload process (like if resuming an upload is requested and the file isn't - there before the upload). I also modified the FTP test server and a few test - cases accordingly to match this modified behavior. - -Daniel Stenberg (29 Sep 2008) -- Daniel Egger provided a patch that allows you to disable proxy support in - libcurl to somewhat reduce the size of the binary. Run configure - --disable-proxy. - -Daniel Fandrich (29 Sep 2008) -- Moved all signal-based name resolution timeout handling into a single new - Curl_resolv_timeout function to reduce coupling. - -Daniel Stenberg (29 Sep 2008) -- Ian Lynagh provided a patch that now makes CURLOPT_RANGE work fine for SFTP - downloads! - -- Maxim Ivanov filed bug report #2107803 - (http://curl.haxx.se/bug/view.cgi?id=2107803) "no CURLINFO_REDIRECT_URL in - multi mode" together with a patch that fixed the problem. - -Daniel Stenberg (25 Sep 2008) -- Emanuele Bovisio submitted bug report #2126435. We fixed the HTTP Digest - auth code to not behave badly when getting a blank realm with - realm="". http://curl.haxx.se/bug/view.cgi?id=2126435 - -Daniel Fandrich (23 Sep 2008) -- Make sure not to dereference the wrong UrlState proto union member when - switching from one protocol to another in a single request (e.g. - redirecting from HTTP to FTP as in test 1055) by resetting - state.expect100header before every request. - -Daniel Stenberg (23 Sep 2008) -- Introducing Jamie Lokier's function for date to epoch conversion used in the - date parser function. This makes our function less dependent on system- - provided functions and instead we do all the magic ourselves. We also no - longer depend on the TZ environment variable. Switching to our own converter - has some side-effect and they are noted here for future reference (taken - from a mail by mr Lokier): - - time_t is not measured in seconds in the ANSI C standard - or even counted - uniformly - weird platforms can use other numeric representations of dates - in time_t - hence the difftime() function. - - On POSIX time_t is measured in UTC seconds, which means not including leap - seconds. But it's mentioned in a few places that some old POSIX-ish - environments include leap seconds in their time_t counts... - - I'm pretty sure [the new implementation is] correct on anything truly POSIX. - And it's obviously a lot less dependent on platform quirks and corner cases - in many ways than the mktime() version. - -- Rob Crittenden brought a patch to "add some locking for thread-safety to NSS - implementation". - -Daniel Stenberg (22 Sep 2008) -- Made the SOCKS code use the new Curl_read_plain() function to fix the bug - Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html - -- recv() errors other than those equal to EAGAIN now cause proper - CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now - disabled it until we can figure out another way to exercise that logic. - -- Michael Goffioul filed bug report #2107377 "Problem with multi + GnuTLS + - proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi - interface using program didn't work when built with GnuTLS and a CONNECT - request was done over a proxy (basically test 502 over a proxy to a HTTPS - site). It turned out the ssl connect function would get called twice which - caused the second call to fail. - -Daniel Fandrich (22 Sep 2008) -- Fixed test 539 to handle an out of memory condition that shows up now - that memdebug.h is included in the test programs. - -Yang Tse (20 Sep 2008) -- Fix regression in configure script which affected OpenSSL builds on MSYS. - -Yang Tse (19 Sep 2008) -- configure script now checks availability of the alarm() function. - -Daniel Fandrich (18 Sep 2008) -- Don't bother to install a SIGALRM handler unless alarm() is available. - Also, leave the existing SIGALRM handler alone if the timeout is too small - to handle. - -Daniel Fandrich (17 Sep 2008) -- Removed reference to curl-ca-bundle.crt in the host verification failure - error message. - -Yang Tse (17 Sep 2008) -- Improve configure detection of gethostname(), localtime_r(), strstr(), - getservbyport_r(), gethostbyaddr_r() and gethostbyname_r(). - -Yang Tse (14 Sep 2008) -- Improve configure detection of strcasecmp(), strcasestr(), strcmpi(), - stricmp(), strlcat(), strncasecmp(), strncmpi() and strnicmp(). - -Yang Tse (13 Sep 2008) -- Disable tracking of fdopen() calls in the low-level memory leak tracking - code when fdopen() is not available, to avoid compiler error. - -Yang Tse (12 Sep 2008) -- Further adjust detection of strerror_r() in the configure process, and - ensure that errno is not modified inside Curl_strerror(). - -Yang Tse (10 Sep 2008) -- Improve detection of gmtime_r(), strtoll(), sigaction(), strtok_r(), - strdup() and ftruncate() in the configure process. - -Daniel Fandrich (9 Sep 2008) -- Mike Revi discovered some swapped speed switches documented in the curl man - page. - -- Checked in some documentation and code improvements and fixes that I - discovered in the FreeBSD ports system. - -Daniel Stenberg (8 Sep 2008) -- Dmitry Kurochkin patched a problem: I have found bug in pipelining through - proxy. I have a transparent proxy. When running with http_proxy environment - variable not set my test completes fine (it goes through transparent - proxy). When I set http_proxy variable my test hangs after the first - downloaded is complete. Looks like the second handle never gets out from - WAITDO state. - - The fix: It makes checkPendPipeline move 1 handler from pend pipe to send - pipe if pipelining is not supported by server but there are no handles in - send and recv pipes. - -- Stefan Krause pointed out that libcurl would wrongly send away cookies to - sites in cases where the cookie clearly has a very old expiry date. The - condition was simply that libcurl's date parser would fail to convert the - date and it would then count as a (timed-based) match. Starting now, a - missed date due to an unsupported date format or date range will now cause - the cookie to not match. - -Daniel Fandrich (5 Sep 2008) -- Improved the logic that decides whether to use HTTP 1.1 features or not in a - request. Setting a specific version with CURLOPT_HTTP_VERSION overrides - all other checks, but otherwise, a 1.0 request will be made if the server - is known to support only 1.0 because it previously responded so and the - connection was kept alive, or a response to a previous request on this handle - came back as 1.0. The latter could take place in cases like redirection or - authentication where several requests have to be made before the operation - is complete. If any one of the servers in a redirection chain supports only - 1.0, then remaining requests will be sent in 1.0 mode. - -- Detect cases where an upload must be sent chunked and the server supports - only HTTP 1.0 and return CURLE_UPLOAD_FAILED. - -Daniel Stenberg (5 Sep 2008) -- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renames - CURLOPT_POST301 (but adds a define for backwards compatibility for you who - don't define CURL_NO_OLDIES). This option allows you to now also change the - libcurl behavior for a HTTP response 302 after a POST to not use GET in the - subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the - patch somewhat before commit. The curl tool got a matching --post302 - option. Test case 1076 was added to verify this. - -- Introducing CURLOPT_CERTINFO and the corresponding CURLINFO_CERTINFO. By - enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS - or FTPS), libcurl will gather lots of server certificate info and that info - can then get extracted by a client after the request has completed with - curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing - helped me test and smoothen out this feature. - - Unfortunately, this feature currently only works with libcurl built to use - OpenSSL. - - This feature was sponsored by networking4all.com - thanks! - -- Dmitriy Sergeyev pointed out that curl_easy_pause() didn't unpause properly - during certain conditions. I also changed this code to use realloc() based - on Daniel Fandrich's suggestion. - -Guenter Knauf (4 Sep 2008) -- MingW32 non-configure builds are now largefile feature enabled by default. - NetWare LIBC builds are also now largefile feature enabled by default. - -Yang Tse (4 Sep 2008) -- Several fixes related with print formatting string directives. - -Daniel Fandrich (3 Sep 2008) -- Search for the FreeBSD CA cert file /usr/local/share/certs/ca-root.crt - -Daniel Fandrich (2 Sep 2008) -- Fixed an out of memory problem that caused torture test failures in tests - 706 and 707. - -Daniel Stenberg (2 Sep 2008) -- Keith Mok added supported_protocols and supported_features to the pkg-config - file for libcurl, and while doing that fix he unified with curl-config.in - how the supported protocols and features are extracted and used, so both those - tools should now always be synced. - -Version 7.19.0 (1 September 2008) - -Daniel Fandrich (29 Aug 2008) -- Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1 - to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072 - and 1073 are similar to test 1069 in that they involve the impossible - scenario of sending chunked data to a HTTP 1.0 server. All these fail - and are added to DISABLED. - -- Added test 1075 to test --anyauth with Basic authentication. - -Daniel Stenberg (29 Aug 2008) -- When libcurl was doing a HTTP POST and the server would respond with - "Connection: close" and actually close the connection after the - response-body, libcurl could still have outstanding data to send and it - would not properly notice this and stop sending. This caused weirdness and - sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222 - - Note that there are still reasons to consider libcurl's behavior when - getting a >= 400 response code while sending data, as Craig Perras' note - "http upload: how to stop on error" specifies: - http://curl.haxx.se/mail/archive-2008-08/0138.html - -Daniel Stenberg (28 Aug 2008) -- Dengminwen reported that libcurl would lock a (cookie) share twice (without - an unlock in between) for a certain case and that in fact works when using - regular windows mutexes but not with pthreads'! Locks should of course not - get locked again so this is now fixed. - http://curl.haxx.se/mail/lib-2008-08/0422.html - -- I'm abandoning the system with the web site mirrors (but keeping download - files bing mirrored) and thus I've changed the URL in the cookiejar header - to no longer use curlm.haxx.se but instead use the main site curl.haxx.se - -Daniel Fandrich (27 Aug 2008) -- Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to set - the HTTP method to GET (or HEAD) when given a value of 0. - -- Added test cases 1068 and 1069 to test a simple HTTP PUT from stdin. Test - case 1069 fails in a similar manner to test 1065 so is added to DISABLED. - -Yang Tse (27 Aug 2008) -- Fix generation of MS VC6 .dsp file to make it support compilation of either - dynamic (DLL) or static (LIB) libcurl libraries in debug and release modes. - -Daniel Fandrich (26 Aug 2008) -- Fixed out of memory problems that caused torture test failures in tests - 1021 and 1067. - -Yang Tse (26 Aug 2008) -- Added check and symbol definition for WIN32 file API usage in configure, - supporting configure's --disable-largefile option for WIN32 targets also. - -- Non-configure systems which do not use config-win32.h configuration file, - and want to use the WIN32 file API, must define USE_WIN32_LARGE_FILES or - USE_WIN32_SMALL_FILES as appropriate in their own configuration files. - -Daniel Stenberg (23 Aug 2008) -- Running 'make ca-firefox' in the root build dir will now run the new - firefox-db2pem.sh conversion script that converts a local Firefox db of ca - certs into PEM format, suitable for use with a OpenSSL or GnuTLS built - libcurl. - -- Constantine Sapuntzakis fixed a bug when doing proxy CONNECT with the multi - interface, and the proxy would send Connection: close during the - authentication phase. http://curl.haxx.se/bug/view.cgi?id=2069047 - -Daniel Fandrich (22 Aug 2008) -- Fixed a problem when --dump-header - was given with more than one URL, - which caused an error when the second header was dumped due to stdout - being closed. Added test case 1066 to verify. Also fixed a potential - problem where a closed file descriptor might be used for an upload - when more than one URL is given. - -Yang Tse (22 Aug 2008) -- Improved libcurl's internal curl_m*printf() functions integral data type - size and signedness handling. - -- Internal adjustments to better select/differentiate when large/small file - support is provided using WIN32 functions directly. - -Daniel Fandrich (20 Aug 2008) -- Added an edited version of Vincent Le Normand's documentation of SFTP quote - commands to the man pages. - -Daniel Stenberg (20 Aug 2008) -- Phil Pellouchoud pointed out that the windows version of libcurl had a - memory leak because it never called the OpenSSL function - CRYPTO_cleanup_all_ex_data() as it was supposed to. This was because of a - missing define in config-win32.h! - -Gisle Vanem (18 Aug 2008) -- Updated lib/Makefile.Watcom with the option to use c-ares (USE_ARES=1). - -Yang Tse (18 Aug 2008) -- Added test case 557 to verify libcurl's internal curl_m*printf() functions - formatting functionality when handling signed and unsigned longs, as well as - our curl_off_t data type. - -Yang Tse (17 Aug 2008) -- OpenSSl enabled NetWare builds are changed to use the 'openssl' subdirectory - when including the OpenSSL header files. This is the recommended setting, this - prevents the undesired inclusion of header files with the same name as those - of OpenSSL but which do not belong to the OpenSSL package. The visible change - from previously released libcurl versions is that now OpenSSl enabled NetWare - builds also define USE_OPENSSL in config files, and that OpenSSL header files - must be located in a subdirectory named 'openssl'. - -Yang Tse (16 Aug 2008) -- Library internal only C preprocessor macros FORMAT_OFF_T and FORMAT_OFF_TU - remain in use as internal curl_off_t print formatting strings for the internal - *printf functions which still cannot handle print formatting string directives - such as "I64d", "I64u", and others available on MSVC, MinGW, Intel's ICC, and - other DOS/Windows compilers. - -Daniel Fandrich (15 Aug 2008) -- Added test case 1063 to test invalid long file ranges with file: URLs and - 1064 to test multiple http PUTs. - -- Added test case 1065 to test a PUT with a single file but two URLs. This - was discovered to be problematic while investigating an incident reported by - Von back in May. curl in this case doesn't include a Content-Length: or - Transfer-Encoding: chunked header which is illegal. This test case is - added to DISABLED until a solution is found. - -Yang Tse (15 Aug 2008) -- C preprocessor macros used internally and equally available externally which - aid in the use of the curl_off_t data type are named: CURL_FORMAT_CURL_OFF_T, - CURL_FORMAT_CURL_OFF_TU, CURL_SIZEOF_CURL_OFF_T, CURL_SUFFIX_CURL_OFF_T, - CURL_SUFFIX_CURL_OFF_TU, CURL_OFF_T_C and CURL_OFF_TU_C. - -Yang Tse (13 Aug 2008) -- The size of long is a build time characteristic and as such it is now recorded - in curlbuild.h as CURL_SIZEOF_LONG. Definition now done from configure process - and in CVS curlbuild.h.dist for non-configure systems. - -Daniel Fandrich (12 Aug 2008) -- Fixed a buffer overflow problem in Curl_proxyCONNECT that could occur - when a server responded with long headers and data. Luckily, the buffer - overflowed into another unused buffer, so no actual harm was done. - Added test cases 1060 and 1061 to verify. - -Daniel Stenberg (12 Aug 2008) -- Andy Tsouladze fixed runtests.pl to not attempt to execute the stunnel - _directory_ if that happened to appear in the path! - -Yang Tse (12 Aug 2008) -- Added macros for minimum-width signed and unsigned curl_off_t integer - constants CURL_OFF_T_C and CURL_OFF_TU_C. The clever double helper macro - used internally to provide its functionality is thanks to Lars Nilsson. - -Daniel Fandrich (11 Aug 2008) -- Fixed a boundary condition error in ftp_readresp() whereby a non-terminal - line of a multiline FTP response whose last byte landed exactly at the end - of the BUFSIZE-length buffer would be treated as the terminal response - line. The following response code read in would then actually be the - end of the previous response line, and all responses from then on would - correspond to the wrong command. Test case 1062 verifies this. - -- Stop closing a never-opened ftp socket. - -Daniel Stenberg (11 Aug 2008) -- Constantine Sapuntzakis filed bug report #2042430 - (http://curl.haxx.se/bug/view.cgi?id=2042430) with a patch. "NTLM Windows - SSPI code is not thread safe". This was due to libcurl using static - variables to tell wether to load the necessary SSPI DLL, but now the loading - has been moved to the more suitable curl_global_init() call. - -- Constantine Sapuntzakis filed bug report #2042440 - (http://curl.haxx.se/bug/view.cgi?id=2042440) with a patch. He identified a - problem when using NTLM over a proxy but the end-point does Basic, and then - libcurl would do wrong when the host sent "Connection: close" as the proxy's - NTLM state was erroneously cleared. - -Yang Tse (11 Aug 2008) -- Added missing signed and unsigned curl_off_t integer constant suffixes for - internal and external use. CURL_SUFFIX_CURL_OFF_T, CURL_SUFFIX_CURL_OFF_TU. - -Daniel Fandrich (7 Aug 2008) -- Fixed an uninitialized variable in multi_runsingle() that could cause a - request to prematurely end. - -- Added test1059 to test the FTP proxy tunnel problem fixed July 11. - -Yang Tse (7 Aug 2008) -- Added curlbuild.h and curlrules.h header files to libcurl's public headers. - File curlbuild.h is a generated file on configure-capable systems. This is - a first step towards configure-based info in public headers. Currently only - used to provide support for a curl_off_t data type which is not gated to - off_t. Further details are documented inside these mentioned header files. - -- Fix CURL_CHECK_DEF so that when the expansion of the preprocessor symbol - results in a set of double-quoted strings, this macro will now return an - expansion which consists of a single double-quoted string as the result of - concatenating all of them. - -- Skip data type check in DO_CURL_OFF_T_CHECK macro when argument is empty. - -- Adjusted testcurl.pl to copy checked out curlbuild.h.dist as curlbuild.h - for non-configure targets when the host system doesn't run buildconf.bat. - -- Prevent buildconf from removing 'Makefile' and 'missing' files. This would - blow away our CVS checked files 'missing' and 'hiper/Makefile'. - -- Remove adjustment done to testcurl.pl to verify if change introduced by - Guenter Knauf in lib/Makefile.netware is enough to get the netware autobuilds - going again. - -Yang Tse (5 Aug 2008) -- Changes done to buildconf script. Validate that autom4te and autoconf, as - well as aclocal and automake, versions match. Improve removal of previous - run generated files. Remove verbose debug logging of aclocal on Solaris. - -Daniel Stenberg (5 Aug 2008) -- Yehoshua Hershberg found a problem that would make libcurl re-use a - connection with the multi interface even if a previous use of it caused a - CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed - SSL connections properly close the connections. - -Daniel Stenberg (4 Aug 2008) -- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 and - proved how PUT and POST with a redirect could lead to a "hang" due to the - data stream not being rewound properly when it had to in order to get sent - properly (again) to the subsequent URL. This is now fixed and these test - cases are no longer disabled. - -Yang Tse (4 Aug 2008) -- Autoconf 2.62 has changed the behaviour of the AC_AIX macro which we use. - Prior versions of autoconf defined _ALL_SOURCE if _AIX was defined. 2.62 - version of AC_AIX defines _ALL_SOURCE and other four preprocessor symbols - no matter if the system is AIX or not. To keep the traditional behaviour, - and an uniform one across autoconf versions AC_AIX is replaced with our - own internal macro CURL_CHECK_AIX_ALL_SOURCE. - -Daniel Stenberg (4 Aug 2008) -- Test case 1041 (added by Daniel Fandrich July 14th) proved a bug where PUT - with -C - sent garbage in the Content-Range: header. I fixed this problem by - making sure libcurl always sets the size of the _entire_ upload if an app - attemps to do resumed uploads since libcurl simply cannot know the size of - what is currently at the server end. Test 1041 is no longer disabled. - -Yang Tse (2 Aug 2008) -- No longer test availability of the gdi32 library, nor use it for linking, even - when we have been doing this since revision 1.47 of configure.ac 4 years and - 5 months ago when cross-compiling a Windows target. We actually don't use any - function from the Windows GDI (Graphics Device Interface) related with drawing - or graphics-related operations. - -Daniel Fandrich (1 Aug 2008) -- Added support for --append on SFTP uploads. Unfortunately, OpenSSH doesn't - support this so it goes untested. - -Yang Tse (1 Aug 2008) -- Configure process now checks if the preprocessor _REENTRANT symbol is already - defined. If it isn't currently defined a set of checks are performed to test - if its definition is required to make visible to the compiler a set of *_r - functions. Finally, if _REENTRANT is already defined or needed it takes care - of making adjustments necessary to ensure that it is defined equally for the - configure process tests and generated config file. - -- Removed definition of CURL_CHECK_WORKING_RESOLVER from acinclude.m4 it has - not been in use since revision 1.81 of configure.in 6 years, 9 months ago. - -Daniel Fandrich (31 Jul 2008) -- Fixed parsing of an IPv6 proxy address to support a scope identifier, - as well as IPv4 addresses in IPv6 format. Also, better handle the case - of a malformatted IPv6 address (avoid empty and NULL strings). - -- Fixed a problem with any FTP URL or any URLs containing an IPv6 address - being mangled when passed to proxies when CURLOPT_PORT is also set - (reported by Pramod Sharma). - -- User names embedded in proxy URLs without a password were parsed - incorrectly--the host name is treated as part of the user name and the - port number becomes the password. This can be observed in test 279 - (was KNOWN_ISSUE #54). - -Daniel Stenberg (30 Jul 2008) -- Phil Blundell added the CURLOPT_ADDRESS_SCOPE option, as well as adjusted - the URL parser to allow numerical IPv6-addresses to be specified with the - scope given, as per RFC4007 - with a percent letter that itself needs to be - URL escaped. For example, for an address of fe80::1234%1 the HTTP URL is: - "http://[fe80::1234%251]/" - -- PHP's bug report #43158 (http://bugs.php.net/bug.php?id=43158) identifies a - true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or - less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that - would set it to something non-zero would return before the assign in almost - all error cases. The internal variable is now set to non-zero from the start - of the function only to get cleared later on if things work out fine. - -- Made the curl tool's -w option support the %{ssl_verify_result} variable - -Daniel Fandrich (30 Jul 2008) -- Added test cases 1052 through 1055 to test uploading data from files - during redirects. Test cases 1052 and 1055 show problems (maybe the same - root cause as 1051) and are disabled. - -- Fixed a couple of buffer overflows in the MS-DOS port of the curl tool. - -Daniel Fandrich (29 Jul 2008) -- Fixed --use-ascii to properly convert text files on Symbian OS, MS-DOS - and OS/2. - -- Added test case 1051 to test Location: following with PUT, as reported - by Ben Sutcliffe. The test when run manually shows a problem in curl - so it's disabled. - -Daniel Fandrich (28 Jul 2008) -- Fixed display of the interface bind address in the trace output when it's - an IPv6 address. - -- Added test cases 1045 through 1049 as simple tests of --interface using the - localhost interface. - -- Added test case 1050 to test --ftp-port with an IPv6 address - -Daniel Stenberg (26 Jul 2008) -- David Bau filed bug report #2026240 "CURL_READFUNC_PAUSE leads to buffer - overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two - problems, and providing the fix for them: - - - CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is - designed for but paused _receiving_ of data! - - - libcurl didn't internally set the read counter to zero when this return - code was detected, which would potentially lead to junk getting sent to - the server. - -Daniel Fandrich (26 Jul 2008) -- Added test 1044 to test large file support in ftp with -I. - -- Eliminate a unnecessary socket creation in Curl_getaddrinfo for an IPv4 - address in an IPv6 capable libcurl. - -- Added feature in runtests.pl to select tests based on key word. - -Daniel Fandrich (23 Jul 2008) -- Changed the long logfile elision code in runtests.pl to properly handle - lines ending in \r. - -- Changed references to TRUE and FALSE in the curl_easy_setopt man page to - 1 and zero, respectively, since TRUE and FALSE aren't part of the - libcurl API. - -Daniel Stenberg (23 Jul 2008) -- I went over the curl_easy_setopt man page and replaced most references to - non-zero with the fixed value of 1. We should strive at making options - support '1' for enabling them mentioned explicitly, as that then will allow - us for to extend them in the future without breaking older programs. - - Possibly we should even introduce a fancy define to use instead of '1' all - over... - -Yang Tse (21 Jul 2008) -- Use the sreadfrom() wrapper to replace recvfrom() in our code. - -Yang Tse (20 Jul 2008) -- when recvfrom prototype uses a void pointer for arguments 2, 5 or 6 this will - now cause the definition, as appropriate, of RECVFROM_TYPE_ARG2_IS_VOID, - RECVFROM_TYPE_ARG5_IS_VOID or RECVFROM_TYPE_ARG6_IS_VOID. - -Yang Tse (17 Jul 2008) -- RECVFROM_TYPE_ARG2, RECVFROM_TYPE_ARG5 and RECVFROM_TYPE_ARG6 are now defined - to the data type pointed by its respective argument and not the pointer type. - -Yang Tse (16 Jul 2008) -- Configure process now checks availability of recvfrom() socket function and - finds out its return type and the types of its arguments. Added definitions - for non-configure systems config files, and introduced macro sreadfrom which - will be used on udp sockets as a recvfrom() wrapper. - -Yang Tse (15 Jul 2008) -- Added description/comment to include paths used in several Makefile.am files. - Added automake option nostdinc to test servers makefile and modified libcurl - external headers include path for libtest programs. - -Daniel Fandrich (14 Jul 2008) -- Added test1040 through test1043 to test -C - on HTTP. Test 1041 failed so - it's added to DISABLED. - -Yang Tse (14 Jul 2008) -- HTTP_ONLY definition check in lib/setup.h is now done once that configuration - file has been included. In this way if symbol is defined in the config file - it will no longer be ignored. Removed inclusion of remaining system header - files from configuration files. Moved _REENTRANT definition up/earlier in - lib/setup.h - -Yang Tse (11 Jul 2008) -- Added missing multiple header inclusion prevention definition for header - file content_encoding.h - -Daniel Fandrich (11 Jul 2008) -- Fixed test 553 to pass the torture test. - -Daniel Stenberg (11 Jul 2008) -- Daniel Fandrich found out we didn't pass on the user-agent properly when - doing "proxy-tunnels" with non-HTTP prototols and that was simply because - the code assumed the user-agent was only needed for HTTP. - -Daniel Fandrich (10 Jul 2008) -- Changed slightly the SFTP quote commands chmod, chown and chgrp to only - set the attribute that has changed instead of all possible ones. Hopefully, - this will solve the "Permission denied" problem that Nagarajan Sreenivasan - reported when setting some modes, but regardless, it saves a protocol - round trip in the chmod case. - -- Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp - uploads with -C - didn't resume properly, but the tests pass. - -Yang Tse (10 Jul 2008) -- Peter Lamberg filed bug report #2015126: "poll gives WSAEINVAL when POLLPRI - is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126) which - exactly pinpointed the problem only triggered on Windows Vista, provided - reference to docs and also a fix. There is much work behind Peter Lamberg's - excellent bug report. Thank You! - -Daniel Fandrich (9 Jul 2008) -- Added tests 1036 and 1037 to verify resumed ftp downloads with -C - - -Daniel Stenberg (9 Jul 2008) -- Andreas Schuldei improved Phil Blundell's patch for IPv6 using c-ares, and I - edited it slightly. Now you should be able to use IPv6 addresses fine even - with libcurl built to use c-ares. - -Daniel Fandrich (9 Jul 2008) -- Fixed an OOM handling problem that cause test 11 to fail the torture test. - -Daniel Fandrich (8 Jul 2008) -- Fixed test 554 to pass the torture test. - -Daniel Fandrich (7 Jul 2008) -- Added test cases 1034 & 1035 to test IDN name conversion failures. - -Daniel Stenberg (7 Jul 2008) -- Scott Barrett provided a test case for a segfault in the FTP code and the - fix for it. It occured when you did a FTP transfer using - CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but - switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being - cleared properly. Scott's test case is now known as test 539 and it - verifies the fix. - -Daniel Stenberg (3 Jul 2008) -- Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx - response codes. Previously libcurl would hang on such occurances. I added - test case 1033 to verify. - -- Introcuding a new timestamp for curl_easy_getinfo(): - CURLINFO_APPCONNECT_TIME. This is set with the "application layer" - handshake/connection is completed. Which typically is SSL, TLS or SSH and by - using this you can figure out the application layer's own connect time. You - can extract the time stamp using curl's -w option and the new variable named - 'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar. - -Daniel Fandrich (2 Jul 2008) -- Support Open Watcom C on Linux (as well as Windows). - -Yang Tse (2 Jul 2008) -- The previously committed fix for bug report #1999181 prevented using the - monotonic clock on any system without an always supported POSIX compliant - implementation. Now the POSIX compliant configuration check is removed and - will fallback to gettimeofday when the monotonic clock is unavailable at - run-time. - -- The configure process will now halt when sed, grep, egrep or ar programs - can not be found among the directories in PATH variable. - -Daniel Stenberg (1 Jul 2008) -- Rolland Dudemaine provided fixes to get libcurl to build for the INTEGRITY - operating system. - -Daniel Stenberg (30 Jun 2008) -- Made the internal printf() support %llu properly to print unsigned long longs. - -- Stephen Collyer and Tor Arntsen helped identify a flaw in the range code - which output the range using a signed variable where it should rather use - unsigned. - -Yang Tse (29 Jun 2008) -- John Lightsey filed bug report #1999181: "CLOCK_MONOTONIC always fails on - some systems" (http://curl.haxx.se/bug/view.cgi?id=1999181). The problem was - that the configure script did not use the _POSIX_MONOTONIC_CLOCK feature test - macro when checking monotonic clock availability. This is now fixed and the - monotonic clock will not be used unless the feature test macro is defined - with a value greater than zero indicating always supported. - -Daniel Fandrich (25 Jun 2008) -- Honour --stderr with the -v option. - -- Fixed a file handle leak in the command line client if more than one - --stderr option was given. - -Daniel Stenberg (22 Jun 2008) -- Eduard Bloch filed the debian bug report #487567 - (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=487567) pointing out that - libcurl used Content-Range: instead of Range when doing a range request with - --head (CURLOPT_NOBODY). This is now fixed and test case 1032 was added to - verify. - -Daniel Fandrich (21 Jun 2008) -- Stopped using ranges in scanf character sequences (e.g. %[a-z]) since that - is not ANSI C, just a common extension. This caused problems on - at least Open Watcom C. - -Yang Tse (20 Jun 2008) -- Modified configuration script to actually verify if the compiler is good - enough at detecting compilation errors or at least it has been properly - configured to do so. Configuration heavily depends on this capability, so - if this compiler sanity check fails the configuration process will now fail. - -Daniel Stenberg (20 Jun 2008) -- Phil Pellouchoud found a case where libcurl built with NSS failed to - handshake with a SSLv2 server, and it turned out to be because it didn't - recognize the cipher named "rc4-md5". In our list that cipher was named - plainly "rc4". I've now added rc4-md5 to work as an alias as Phil reported - that it made things work for him again. - -- Hans-Jurgen May pointed out that trying SCP or SFTP over a SOCKS proxy - crashed libcurl. This is now addressed by making sure we use "plain send" - internally when doing the socks handshake instead of the Curl_write() - function which is designed to use the "target" protocol. That's then SCP or - SFTP in this case. I also took the opportunity and cleaned up some ssh- - related #ifdefs in the code for readability. - -Daniel Stenberg (19 Jun 2008) -- Christopher Palow fixed a curl_multi_socket() issue which previously caused - libcurl to not tell the app properly when a socket was closed (when the name - resolve done by c-ares is completed) and then immediately re-created and put - to use again (for the actual connection). Since the closure will make the - "watch status" get lost in several event-based systems libcurl will need to - tell the app about this close/re-create case. - -- Dengminwen found a bug in the connection re-use function when using the - multi interface with pipelining enabled as it would wrongly check for, - detect and close "dead connections" even though that connection was already - in use! - -Daniel Fandrich (18 Jun 2008) -- Added SSH failure test cases 628-632 - -- Fixed a memory leak in the command-line tool that caused a valgrind error. - -Daniel Stenberg (18 Jun 2008) -- Rob Crittenden brought a fix for the NSS layer that makes libcurl no longer - always fire up a new connection rather than using the existing one when the - multi interface is used. Original bug report: - https://bugzilla.redhat.com/show_bug.cgi?id=450140 - -Yang Tse (18 Jun 2008) -- Internal configure script improvement. No longer break out of shell "for" - statements from inside AC_FOO_IFELSE macros, otherwise temporary macro files - are not properly removed. - -Daniel Fandrich (12 Jun 2008) -- Fixed curl-config --ca which wasn't being exported by configure. - -Daniel Stenberg (11 Jun 2008) -- I did a cleanup of the internal generic SSL layer and how the various SSL - libraries are supported. Starting now, each underlying SSL library support - code does a set of defines for the 16 functions the generic layer (sslgen.c) - uses (all these new function defines use the prefix "curlssl_"). This - greatly simplified the generic layer in readability by involving much less - #ifdefs and other preprocessor stuff and should make it easier for people to - make libcurl work with new SSL libraries. - - Hopefully I can later on document these 16 functions somewhat as well. - - I also made most of the internal SSL-dependent functions (using Curl_ssl_ - prefix) #defined to nothing when no SSL support is requested - previously - they would unnecessarily call mostly empty functions. - - I've built libcurl with OpenSSL and GnuTLS and without SSL to test this and - I've also tried building with NSS but the NSS support is a mystery to me and - I failed to build libcurl with the NSS libraries I have installed. We really - should A) improve our configure script to detect unsuitable NSS versions - already at configure time and B) document our requirements better for the - SSL libraries. - -Daniel Stenberg (10 Jun 2008) -- I made the OpenSSL code build again with OpenSSL 0.9.6. The CRLFILE - functionality killed it due to its unconditional use of - X509_STORE_set_flags... - -Daniel Stenberg (8 Jun 2008) -- Due to the three new libcurl changes and the massive command line option - change I decided we'll mark it by bumping the next release number to 7.19.0! - -- curl the tool now deals with its command line options somewhat differently! - All boolean options (such as -O, -I, -v etc), both short and long versions, - now always switch on/enable the option named. Using the same option multiple - times thus make no difference. To switch off one of those options, you need - to use the long version of the option and type --no-OPTION. Like to disable - verbose mode you use --no-verbose! - -- Added --remote-name-all to curl, which if used changes the default for all - given URLs to be dealt with as if -O is used. So if you want to disable that - for a specific URL after --remote-name-all has been used, you muse use -o - - or --no-remote-name. - -Daniel Stenberg (6 Jun 2008) -- Axel Tillequin and Arnaud Ebalard added support for CURLOPT_ISSUERCERT, for - OpenSSL, NSS and GnuTLS-built libcurls. - -- Axel Tillequin and Arnaud Ebalard added support for CURLOPT_CRLFILE, for - OpenSSL, NSS and GnuTLS-built libcurls. - -- Added CURLINFO_PRIMARY_IP as a new information retrievable with - curl_easy_getinfo. It returns a pointer to a string with the most recently - used IP address. Modified test case 500 to also verify this feature. The - implementing of this feature was sponsored by Lenny Rachitsky at NeuStar. - -Version 7.18.2 (4 June 2008) - -Daniel Fandrich (3 Jun 2008) -- Fixed a problem where telnet data would be lost if an EWOULDBLOCK - condition were encountered. - -Marty Kuhrt (1 Jun 2008) -- Updated main.c to return CURLE_OK if PARAM_HELP_REQUESTED was returned - from getparameter instead of CURLE_FAILED_INIT. No point in returning - an error if --help or --version were requested. - -Daniel Stenberg (28 May 2008) -- Emil Romanus found a problem and helped me repeat it. It occured when using - the curl_multi_socket() API with HTTP pipelining enabled and could lead to - the pipeline basically stalling for a very long period of time until it took - off again. - -- Jeff Weber reported memory leaks with aborted SCP and SFTP transfers and - provided excellent repeat recipes. I fixed the cases I managed to reproduce - but Jeff still got some (SCP) problems even after these fixes: - http://curl.haxx.se/mail/lib-2008-05/0342.html - -Daniel Stenberg (26 May 2008) -- Bug report #1973352 (http://curl.haxx.se/bug/view.cgi?id=1973352) identified - how the HTTP redirect following code didn't properly follow to a new URL if - the new url was but a query string such as "Location: ?moo=foo". Test case - 1031 was added to verify this fix. - -- Andreas Faerber and Scott McCreary made (lib)curl build for the Haiku OS. - -Yang Tse (26 May 2008) -- David Rosenstrauch reported that header files spnegohelp.h and - openssl/objects.h were needed to compile SPNEGO support. - -Daniel Fandrich (22 May 2008) -- Made sure to pass longs in to curl_easy_setopt where necessary in the - example programs and libtest code. - -Daniel Stenberg (19 May 2008) -- When trying to repeat a multi interface problem I fell over a few multi - interface problems: - - o with pipelining disabled, the state should never be set to WAITDO but - rather go straight to DO - - o we had multiple states for which the internal function returned no socket - at all to wait for, with the effect that libcurl calls the socket callback - (when curl_multi_socket() is used) with REMOVE prematurely (as it would be - added again within very shortly) - - o when in DO and DOING states, the HTTP and HTTPS protocol handler functions - didn't return that the socket should be waited for writing, but instead it - was treated as if no socket was needing monitoring so again REMOVE was - called prematurely. - -Daniel Stenberg (13 May 2008) -- Added test case 556 that uses curl_easy_send() and curl_easy_recv() - -Daniel Stenberg (9 May 2008) -- Introducing curl_easy_send() and curl_easy_recv(). They can be used to send - and receive data over a connection previously setup with curl_easy_perform() - and its CURLOPT_CONNECT_ONLY option. The sendrecv.c example was added to - show how they can be used. - -Yang Tse (9 May 2008) -- Internal time differences now use monotonic time source if available. - This also implies the removal of the winmm.lib dependency for WIN32. - -Daniel Stenberg (9 May 2008) -- Stefan Krause reported a busy-looping case when using the multi interface - and doing CONNECT to a proxy. The app would then busy-loop until the proxy - completed its response. - -Michal Marek (9 May 2008) -- Make Curl_write and it's callees accept a const pointer, in preparation - of tetetest's patch for curl_easy_send() - -Daniel Stenberg (7 May 2008) -- Liam Healy filed the debian bug report #480044 - (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=480044) identifying a - segfault when using krb5 ftp, but the krb4 code had the same problem. - -Yang Tse (7 May 2008) -- Christopher Palow provided the patch (edited by me) that introduces the - use of microsecond resolution keys for internal splay trees. - -Daniel Stenberg (4 May 2008) -- Yuriy Sosov pointed out a configure fix for detecting c-ares when that is - built debug-enabled. - -Daniel Stenberg (3 May 2008) -- Ben Van Hof filed bug report #1945240: "libcurl sometimes sends body twice - when using CURL_AUTH_ANY" (http://curl.haxx.se/bug/view.cgi?id=1945240). - The problem was that when libcurl rewound a stream meant for upload when it - would prepare for a second request, it could accidentally continue the - sending of the rewound data on the first request instead of on the second. - Ben also provided test case 1030 that verifies this fix. - -Daniel Stenberg (3 May 2008) -- Jean-Francois Bertrand reported a libcurl crash with CURLOPT_TCP_NODELAY - since libcurl used getprotobyname() and that isn't thread-safe. We now - switched to use IPPROTO_TCP unconditionally, but perhaps the proper fix is - to detect the thread-safe version of the function and use that. - http://curl.haxx.se/mail/lib-2008-05/0011.html - -Daniel Stenberg (1 May 2008) -- Bart Whiteley provided a patch that made libcurl work properly when an app - uses the CURLOPT_OPENSOCKETFUNCTION callback to create a unix domain socket - to a http server. - -Daniel Stenberg (29 Apr 2008) -- To make it easier for applications that want lots of magic stuff done on - redirections and thus cannot use CURLOPT_FOLLOWLOCATION easily, we now - introduce the new CURLINFO_REDIRECT_URL option that lets applications - extract the URL libcurl would've redirected to if it had been told to. This - then enables the application to continue to that URL as it thinks is - suitable, without having to re-implement the magic of creating the new URL - from the Location: header etc. Test 1029 verifies it. - -Yang Tse (29 Apr 2008) -- Improved easy interface resolving timeout handling in c-ares enabled builds - -Daniel Fandrich (28 Apr 2008) -- Added test 1028 to test an HTTP redirect to a FTP URL. - -Daniel Stenberg (28 Apr 2008) -- Norbert Frese filed bug report #1951588: "Problem with curlftpfs and - libcurl" (http://curl.haxx.se/bug/view.cgi?id=1951588) which seems to be an - identical report to what Denis Golovan reported in - http://curl.haxx.se/mail/lib-2008-02/0108.html The FTP code didn't reset the - user/password pointers properly even though there might've been a new - struct/cconnection getting used. - -Daniel Stenberg (26 Apr 2008) -- Reverted back to use automake 1.9.6 in the next release (from automake - 1.10.1) since it *still* suffers from Solaris-related bugs. Our previous - automake 1.10 problem was reported in bug #1701360 - (http://curl.haxx.se/bug/view.cgi?id=1701360) and this recent problem was - bug #1944825 (http://curl.haxx.se/bug/view.cgi?id=1944825). I have not - personally approached the automake team about either one of these but I - figure we need a Solaris 10 guy to do it! - -Yang Tse (25 Apr 2008) -- Added 'timeout' and 'delay' attributes support for the test harness - <command> subsection. - -Daniel Fandrich (24 Apr 2008) -- Made --stderr able to redirect all stderr messages. - -Yang Tse (23 Apr 2008) -- Improve synchronization between test harness runtests.pl script - and test harness servers to minimize risk of false test failures. - -Daniel Fandrich (22 Apr 2008) -- Added support for running on Symbian OS. - -Daniel Fandrich (18 Apr 2008) -- Added test cases 1026 and 1027 to do some rudimentary tests on the --manual - and --help options. - -Michal Marek (14 Apr 2008) -- allow disabling the typechecker by defining CURL_DISABLE_TYPECHECK, as - discussed in http://curl.haxx.se/mail/lib-2008-04/0291.html - -Daniel Stenberg (14 Apr 2008) -- Stefan Krause reported a case where the OpenSSL handshake phase wasn't - properly acknowledging the timeout values, like if you pulled the network - plug in the midst of it. - -- Andre Guibert de Bruet fixed a second case of not checking the malloc() - return code in the Negotiate code. - -- Sandor Feldi reported bug #1942022 - (http://curl.haxx.se/bug/view.cgi?id=1942022) pointing out a mistake in the - lib/Makefile.vc[68] makefiles' release-ssl-dll target. - -- Brock Noland reported that curl behaved differently depending on which order - you used -i and -I. - -Daniel Stenberg (12 Apr 2008) -- Andre Guibert de Bruet found and fixed a case where malloc() was called but - was not checked for a NULL return, in the Negotiate code. - -Daniel Fandrich (9 Apr 2008) -- Added test cases 1024 & 1025 to test a scenario similar to the one reported - by Ben Combee where libcurl would send the wrong cookie to a redirected - server. libcurl was doing the right thing in these test cases. - -Michal Marek (7 Apr 2008) -- Fix the MIT / Heimdal check for good: - Define HAVE_GSSMIT if <gssapi/{gssapi.h,gssapi_generic.h,gssapi_krb5.h}> are - available, otherwise define HAVE_GSSHEIMDAL if <gssapi.h> is available. - - Only define GSS_C_NT_HOSTBASED_SERVICE to gss_nt_service_name if - GSS_C_NT_HOSTBASED_SERVICE isn't declared by the gssapi headers. This should - avoid breakage in case we wrongly recognize Heimdal as MIT again. - -Daniel Stenberg (5 Apr 2008) -- Alexey Simak fixed curl_easy_reset() to reset the max redirect limit properly - -- Based on the Debian bug report #474224 that complained about the FTP error - message when libcurl doesn't get a 220 back immediately on connect, I now - changed it to be more specific on what the problem is. Also worth noticing: - while the bug report contains an example where the response is: - - 421 There are too many connected users, please try again later - - we cannot assume that the error message will always be this readable nor - that it fits within a particular boundary etc. - -Daniel Fandrich (3 Apr 2008) -- Added test627 to test SFTP with CURLOPT_NOBODY - -Daniel Stenberg (3 Apr 2008) -- Setting CURLOPT_NOBODY to FALSE will now switch the HTTP request method to - GET simply because previously when you set CURLOPT_NOBODY to TRUE first and - then FALSE you'd end up in a broken state where a HTTP request would do a - HEAD by still act a lot like for a GET and hang waiting for the content etc. - -- Scott Barrett added support for CURLOPT_NOBODY over SFTP - -Daniel Fandrich (3 Apr 2008) -- Made sure that curl_global_init is called in all the multithreaded - example programs. - -Michal Marek (31 Mar 2008) -- Removed the generated ca-bundle.h file. The verbatim value of $ca and - $capath is known to configure, so it can be defined in config.h instead. - -Daniel Stenberg (31 Mar 2008) -- Added CURLFORM_STREAM as a supported option to curl_formadd() to allow an - application to provide data for a multipart with the read callback. Note - that the size needs to be provided with CURLFORM_CONTENTSLENGTH when the - stream option is used. This feature is verified by the new test case - 554. This feature was sponsored by Xponaut. - -Daniel Fandrich (30 Mar 2008) -- Changed the makefile so the doc/examples/ programs are never built in a - normal build/install (only with the 'make check' target), so that a - build failure in the examples isn't fatal. - -Version 7.18.1 (30 March 2008) - -Daniel Stenberg (28 Mar 2008) -- Stephen Collyer pointed out that configure --with-libssh2 without a given - path didn't work properly. - -Daniel Stenberg (27 Mar 2008) -- As found out and reported by Dan Petitt, libcurl didn't show progress/call - the progress callback for the first (potentially huge) piece of body data - sent together with the POST request headers in the initial send(). - -Daniel Stenberg (25 Mar 2008) -- Made setting the CURLOPT_SSL_CTX_FUNCTION option return a failure in case - libcurl wasn't built to use OpenSSL as that is a prerequisite for this - option to function! - -Daniel Stenberg (22 Mar 2008) -- Fixed the problem with doing a zero byte SCP transfer, verified with test - case 617 (which was added by Daniel Fandrich 5 Mar 2008). - -Daniel Fandrich (20 Mar 2008) -- Fixed a problem where curl-config --protocols could erroneously show LDAPS - support when curl didn't even have regular LDAP support. It looks like - this could happen when the --enable-ldaps configure switch is given but - configure couldn't find the LDAP headers or libraries. - -Michal Marek (20 Mar 2008) -- Added --with-ca-path=DIRECTORY configure option to use an openSSL CApath by - default instead of a ca bundle. The configure script will also look for a - ca path if no ca bundle is found and no option given. - -- Fixed detection of previously installed curl-ca-bundle.crt - -Daniel Fandrich (18 Mar 2008) -- Added test 626 to reproduce an infinite loop when given an invalid - SFTP quote command reported by Vincent Le Normand, and fixed it. - -Michal Marek (18 Mar 2008) -- Added curl_easy_getinfo typechecker. - -- Added macros for curl_share_setopt and curl_multi_setopt to check at least - the correct number of arguments. - -Daniel Fandrich (13 Mar 2008) -- Added tests 622-625 to test SFTP/SCP uploads. Test 625 was an attempt to - reproduce the --ftp-create-dirs problem reported by Brian Ulm, but that - seems to need a call curl_easy_reset() which this test case doesn't do. - -Daniel Stenberg (13 Mar 2008) -- Brian Ulm figured out that if you did an SFTP upload with - CURLOPT_FTP_CREATE_MISSING_DIRS to create a directory, and then re-used the - handle and uploaded another file to another directory that needed to be - created, the second upload would fail. Another case of a state variable that - wasn't properly reset between requests. - -- I rewrote the 100-continue code to use a single state variable instead of - the previous two ones. I think it made the logic somewhat clearer. - -Daniel Stenberg (11 Mar 2008) -- Dmitry Popov filed bug report #1911069 - (http://curl.haxx.se/bug/view.cgi?id=1911069) that identified a race - condition in the name resolver code when the DNS cache is shared between - multiple easy handles, each running in simultaneous threads that could cause - crashes. - -- Added a macro for curl_easy_setopt() that accepts three arguments and simply - does nothing with them, just to make sure libcurl users always use three - arguments to this function. Due to its use of ... for the third argument, it - is otherwise hard to detect abuse. - -Michal Marek (11 Mar 2008) -- Added a type checking macro for curl_easy_setopt(), needs gcc-4.3 and only - works in C mode atm (http://curl.haxx.se/mail/lib-2008-02/0267.html , - http://curl.haxx.se/mail/lib-2008-02/0292.html ) - -Daniel Fandrich (10 Mar 2008) -- Added tests 618-621 to test SFTP/SCP transfers of more than one file - (test 620 tests the just-fixed problem reported by Brian Ulm). - -Daniel Stenberg (9 Mar 2008) -- Brian Ulm reported a crash when doing a second SFTP transfer on a re-used - easy handle if curl_easy_reset() was used between them. I fixed it and Brian - verified that it cured his problem. - -- Brian Ulm reported that if you first tried to download a non-existing SFTP - file and then fetched an existing one and re-used the handle, libcurl would - still report the second one as non-existing as well! I fixed it and Brian - verified that it cured his problem. - -Michal Marek (6 Mar 2008) -- Fix the gssapi configure check to detect newer MIT Kerberos (patch by - Michael Calmer) - -Yang Tse (6 Mar 2008) -- Fix regression on Curl_socket_ready() and Curl_poll() so that these will - again fail on select/poll errors different than EINTR. - -Daniel Fandrich (5 Mar 2008) -- Fixed the test harness so it will write out zero-length data files. - -- Added tests 616 and 617 to see how SFTP and SCP cope with zero-length - files, as questioned by Mike Protts. SFTP does for me but SCP doesn't - so test 617 is disabled for now. - -Daniel S (4 Mar 2008) -- Mike Protts brought a patch that makes resumed transfers work with SFTP. - -Daniel S (1 Mar 2008) -- Anatoli Tubman found and fixed a crash with Negotiate authentication used on - a re-used connection where both requests used Negotiate. - -Guenter Knauf (26 Feb 2008) -- Kaspar Brand provided a patch to support server name indication (RFC 4366). - -Daniel S (25 Feb 2008) -- Kaspar Brand made GnuTLS-built libcurl properly acknowledge the option that - forces it to prefer SSLv3. - -Daniel S (23 Feb 2008) -- Sam Listopad provided a patch in feature-request #1900014 - http://curl.haxx.se/bug/feature.cgi?id=1900014 that makes libcurl (built to - use OpenSSL) support a full chain of certificates in a given PKCS12 - certificate. - -Daniel S (22 Feb 2008) -- Georg Lippitsch made the src/Makefile.vc6 makefile use the same memory model - options as the lib/Makefile.vc6 already did. - -Daniel S (21 Feb 2008) -- Zmey Petroff found a crash when libcurl accessed a NULL pointer, which - happened if you set the connection cache size to 1 and for example failed to - login to an FTP site. Bug report #1896698 - (http://curl.haxx.se/bug/view.cgi?id=1896698) - -Daniel S (20 Feb 2008) -- Fixed test case 405 to not fail when libcurl is built with GnuTLS - -- Based on initial work done by Gautam Kachroo to address a bug, we now keep - better control at the exact state of the connection's SSL status so that we - know exactly when it has completed the SSL negotiation or not so that there - won't be accidental re-uses of connections that are wrongly believed to be - in SSL-completed-negotiate state. - -- We no longer support setting the CURLOPT_URL option from inside a callback - such as the CURLOPT_SSL_CTX_FUNCTION one treat that as if it was a Location: - following. The patch that introduced this feature was done for 7.11.0, but - this code and functionality has been broken since about 7.15.4 (March 2006) - with the introduction of non-blocking OpenSSL "connects". - - It was a hack to begin with and since it doesn't work and hasn't worked - correctly for a long time and nobody has even noticed, I consider it a very - suitable subject for plain removal. And so it was done. - -Guenter Knauf (19 Feb 2008) -- We do no longer support SSLv2 by default since it has known flaws. - Kaspar Brand provided a patch for all supported SSL toolkits. - -Daniel Fandrich (19 Feb 2008) -- Added test309 to test HTTP redirect to HTTPS URL - -Daniel S (18 Feb 2008) -- We're no longer providing a very old ca-bundle in the curl tarball. You can - get a fresh one downloaded and created with 'make ca-bundle' or you can get - one from here => http://curl.haxx.se/docs/caextract.html if you want a fresh - new one extracted from Mozilla's recent list of ca certs. - - The configure option --with-ca-bundle now lets you specify what file to use - as default ca bundle for your build. If not specified, the configure script - will check a few known standard places for a global ca cert to use. - -Daniel S (17 Feb 2008) -- Jerome Muffat-Meridol helped me fix Curl_done() to close the current - connection by force when it was called before the entire request is - completed, simply because we can't know if the connection really can be - re-used safely at that point. - -- Based on the same debugging logic, I've also made Curl_http_done() not - return CURLE_GOT_NOTHING if called "prematurely". This should have no real - effect to anything but the code makes more sense like this. - -Daniel S (15 Feb 2008) -- Made the gnutls code path not even try to get the server cert if no peer - verification is requested. Previously it would even return failure if gnutls - failed to get the server cert even though no verification was asked for. - Public server showing the problem: https://www.net222.caisse-epargne.fr - -- Fix my Curl_timeleft() leftover mistake in the gnutls code - -- Pooyan McSporran found and fixed a flaw where you first would do a normal - http request and then you'd reuse the handle and replace the Accept: header, - as then libcurl would send two Accept: headers! - -Daniel S (11 Feb 2008) -- Yang Tse pointed out a few remaining quirks from my timeout refactoring from - Feb 7 that didn't abort properly on timeouts. These are actually old - problems but now they should be fixed. - -Yang Tse (10 Feb 2008) -- Bug report #1888932 (http://curl.haxx.se/bug/view.cgi?id=1888932) points out - and provides test program that demonstrates that libcurl might not set error - description message for error CURLE_COULDNT_RESOLVE_HOST for Windows threaded - name resolver builds. Fixed now. - -Daniel Fandrich (8 Feb 2008) -- Added key words to all SSL-using tests so they can be skipped if necessary. - Removed a few unnecessary requires SSL statements. - -Daniel S (8 Feb 2008) -- Mike Hommey filed and fixed bug report #1889856 - (http://curl.haxx.se/bug/view.cgi?id=1889856): When using the gnutls ssl - layer, cleaning-up and reinitializing curl ends up with https requests - failing with "ASN1 parser: Element was not found" errors. Obviously a - regression added in 7.16.3. - -Yang Tse (8 Feb 2008) -- Improved test harness SCP/SFTP start up server verification, doing a real - connection to the sftp server, authenticating and running a simple sftp - pwd command using the test harness generated configuration and key files. - -Daniel S (8 Feb 2008) -- Günter Knauf added lib/mk-ca-bundle.pl which gets the Firefox ca bundle and - creates a suitable ca-bundle.crt file in PEM format for use with curl. The - recommended way to run it is to use 'make ca-bundle' in the build tree root. - -Daniel Fandrich (7 Feb 2008) -- Added tests 1022 and 1023 to validate output of curl-config --version and - --vernum - -Daniel S (7 Feb 2008) -- Refactored a lot of timeout code into a few functions in an attempt to make - them all use the same (hopefully correct) logic to make it less error-prone - and easier to introduce library-wide where it should be used. - -Yang Tse (6 Feb 2008) -- Fix an issue in strdup replacement function when dealing with absolutely - huge strings. Only systems without a standard strdup would be affected. - -Daniel S (3 Feb 2008) -- Dmitry Kurochkin cleaned up the pipelining code and removed the need for and - use of the "is_in_pipeline" struct field. - -- I wrote up and added the threaded-ssl.c example source code that shows how - to do multi-threaded downloads of HTTPS files with a libcurl that is built - with OpenSSL. It uses pthreads for the threading. - -Daniel S (31 Jan 2008) -- Niklas Angebrand made the cookie support in libcurl properly deal with the - "HttpOnly" feature introduced by Microsoft and apparently also supported by - Firefox: http://msdn2.microsoft.com/en-us/library/ms533046.aspx . HttpOnly - is now supported when received from servers in HTTP headers, when written to - cookie jars and when read from existing cookie jars. - - I modified test case 31 and 46 to also do some basic HttpOnly testing. - -- Dmitry Kurochkin moved several struct fields from the connectdata struct to - the SingleRequest one to make pipelining better. It is a bit tricky to keep - them in the right place, to keep things related to the actual request or to - the actual connection in the right place. - -Daniel S (29 Jan 2008) -- Dmitry Kurochkin fixed Curl_done() for pipelining, as it could previously - crash! - -- Michal Marek fixed minor mistake in test case 553 that prevented it from - working on other IP-addresses or port numbers. - -Version 7.18.0 (28 January 2008) - -Daniel S (27 Jan 2008) -- Dmitry Kurochkin: In "real world" testing I found more bugs in - pipelining. Broken connection is not restored and we get into infinite - loop. It happens because of wrong is_in_pipeline values. - -Daniel S (26 Jan 2008) -- Kevin Reed filed bug report #1879375 - (http://curl.haxx.se/bug/view.cgi?id=1879375) which describes how libcurl - got lost in this scenario: proxy tunnel (or HTTPS over proxy), ask to do any - proxy authentication and the proxy replies with an auth (like NTLM) and then - closes the connection after that initial informational response. - - libcurl would not properly re-initialize the connection to the proxy and - continue the auth negotiation like supposed. It does now however, as it will - now detect if one or more authentication methods were available and asked - for, and will thus retry the connection and continue from there. - -- I made the progress callback get called properly during proxy CONNECT. - -Daniel S (23 Jan 2008) -- Igor Franchuk pointed out that CURLOPT_COOKIELIST set to "ALL" leaked - memory, and so did "SESS". Fixed now. - -Yang Tse (22 Jan 2008) -- Check poll.h at configuration time, and use it when sys/poll.h unavailable - -Daniel S (22 Jan 2008) -- Dmitry Kurochkin removed the cancelled state for pipelining, as we agreed - that it is bad anyway. Starting now, removing a handle that is in used in a - pipeline will break the pipeline - it'll be set back up again but still... - -Yang Tse (21 Jan 2008) -- Disable ldap support for cygwin builds, since it breaks whole build process. - Fixing it will affect other platforms, so it is postponed for another release. - -Daniel S (18 Jan 2008) -- Lau Hang Kin found and fixed a problem with the multi interface when doing - CONNECT over a proxy. curl_multi_fdset() didn't report back the socket - properly during that state, due to a missing case in the switch in the - multi_getsock() function. - -Yang Tse (17 Jan 2008) -- Don't abort tests 518 and 537 when unable to raise the open-file soft limit. - -Daniel S (16 Jan 2008) -- Nathan Coulter's patch that makes runtests.pl respect the PATH when figuring - out what valgrind to run. - -Yang Tse (16 Jan 2008) -- Improved handling of out of memory in the command line tool that afected - data url encoded HTTP POSTs when reading it from a file. - -Daniel S (16 Jan 2008) -- Dmitry Kurochkin worked a lot on improving the HTTP Pipelining support that - previously had a number of flaws, perhaps most notably when an application - fired up N transfers at once as then they wouldn't pipeline at all that - nicely as anyone would think... Test case 530 was also updated to take the - improved functionality into account. - -- Calls to Curl_failf() are not supposed to provide a trailing newline as the - function itself adds that. Fixed on 50 or something strings! - -Daniel S (15 Jan 2008) -- I made the torture test on test 530 go through. This was actually due to - silly code left from when we switched to let the multi handle "hold" the dns - cache when using the multi interface... Of course this only triggered when a - certain function call returned error at the correct moment. - -Daniel S (14 Jan 2008) -- Joe Malicki filed bug report #1871269 - (http://curl.haxx.se/bug/view.cgi?id=1871269) and we could fix his hang- - problem that occurred when doing a large HTTP POST request with the - response-body read from a callback. - -Daniel S (12 Jan 2008) -- I re-arranged the curl --help output. All the options are now sorted on - their long option names and all descriptions are one-liners. - -- Eric Landes provided the patch (edited by me) that introduces the - --keepalive-time to curl to set the keepalive probe interval. I also took - the opportunity to rename the recently added no-keep-alive option to - no-keepalive to keep a consistent naming and to avoid getting two dashes in - these option names. Eric also provided an update to the man page for the new - option. - -Daniel S (11 Jan 2008) -- Daniel Egger made CURLOPT_RANGE work on file:// URLs the very same way it - already worked for FTP:// URLs. - -- I made the curl tool switch from using CURLOPT_IOCTLFUNCTION to now use the - spanking new CURLOPT_SEEKFUNCTION simply to take advantage of the improved - performance for the upload resume cases where you want to upload the last - few bytes of a very large file. To implement this decently, I had to switch - the client code for uploading from fopen()/fread() to plain open()/read() so - that we can use lseek() to do >32bit seeks (as fseek() doesn't allow that) - on systems that offer support for that. - -Daniel S (10 Jan 2008) -- Michal Marek made curl-config --libs not include /usr/lib64 in the output - (it already before skipped /usr/lib). /usr/lib64 is the default library - directory on many 64bit systems and it's unlikely that anyone would use the - path privately on systems where it's not. - -- Georg Lippitsch brought CURLOPT_SEEKFUNCTION and CURLOPT_SEEKDATA to allow - libcurl to seek in a given input stream. This is particularly important when - doing upload resumes when there's already a huge part of the file present - remotely. Before, and still if this callback isn't used, libcurl will read - and through away the entire file up to the point to where the resuming - begins (which of course can be a slow opereration depending on file size, - I/O bandwidth and more). This new function will also be preferred to get - used instead of the CURLOPT_IOCTLFUNCTION for seeking back in a stream when - doing multi-stage HTTP auth with POST/PUT. - -- Nikitinskit Dmitriy filed bug report #1868255 - (http://curl.haxx.se/bug/view.cgi?id=1868255) with a patch. It identifies - and fixes a problem with parsing WWW-Authenticate: headers with additional - spaces in the line that the parser wasn't written to deal with. - -Daniel S (8 Jan 2008) -- Introducing curl_easy_pause() and new magic return codes for both the read - and the write callbacks that now can make a connection's reading and/or - writing get paused. - -Daniel S (6 Jan 2008) -- Jeff Johnson filed bug report #1863171 - (http://curl.haxx.se/bug/view.cgi?id=1863171) where he pointed out that - libcurl's date parser didn't accept a +1300 time zone which actually is used - fairly often (like New Zealand's Dailight Savings Time), so I modified the - parser to now accept up to and including -1400 to +1400. - -Daniel S (5 Jan 2008) -- Based on further discussion on curl-library, I reverted yesterday's SOCKS5 - code to instead introduce support for a new proxy type called - CURLPROXY_SOCKS5_HOSTNAME that is used to send the host name to the proxy - instead of IP address and there's thus no longer any need for a new - curl_easy_setopt() option. - - The default SOCKS5 proxy is again back to sending the IP address to the - proxy. The new curl command line option for enabling sending host name to a - SOCKS5 proxy is now --socks5-hostname. - -Daniel S (4 Jan 2008) -- Based on Maxim Perenesenko's patch, we now do SOCKS5 operations and let the - proxy do the host name resolving and only if --socks5ip (or - CURLOPT_SOCKS5_RESOLVE_LOCAL) is used we resolve the host name locally and - pass on the IP address only to the proxy. - -Yang Tse (3 Jan 2008) -- Modified test harness to allow SCP, SFTP and SOCKS4 tests to run with - OpenSSH 2.9.9, SunSSH 1.0 or later versions. SOCKS5 tests need OpenSSH - 3.7, SunSSH 1.0 or later. - -Daniel S (2 Jan 2008) -- I fixed two cases of missing return code checks when handling chunked - decoding where a write error (or abort return from a callback) didn't stop - libcurl's processing. - -- I removed the socklen_t use from the public curl/curl.h header and instead - made it an unsigned int. The type was only used in the curl_sockaddr struct - definition (only used by the curl_opensocket_callback). On all platforms I - could find information about, socklen_t is 32 unsigned bits large so I don't - think this will break the API or ABI. The main reason for this change is of - course for all the platforms that don't have a socklen_t definition in their - headers to build fine again. Providing our own configure magic and custom - definition of socklen_t on those systems proved to work but was a lot of - cruft, code and extra magic needed - when this very small change of type - seems harmless and still solves the missing socklen_t problem. - -- Richard Atterer brought a patch that added support for SOCKS4a proxies, - which is an inofficial PROXY4 variant that sends the hostname to the proxy - instead of the resolved address (which is already supported by SOCKS5). - --socks4a is the curl command line option for it and CURLOPT_PROXYTYPE can - now be set to CURLPROXY_SOCKS4A as well. - -Daniel S (1 Jan 2008) -- Mohun Biswas pointed out that --libcurl generated a source code with an int - function but without a return statement. While fixing that, I also took care - about adding some better comments for the generated code. - |