aboutsummaryrefslogtreecommitdiff
path: root/CHANGES
diff options
context:
space:
mode:
Diffstat (limited to 'CHANGES')
-rw-r--r--CHANGES1184
1 files changed, 0 insertions, 1184 deletions
diff --git a/CHANGES b/CHANGES
index 098ef6ecf..9ee226bb7 100644
--- a/CHANGES
+++ b/CHANGES
@@ -326,1187 +326,3 @@ Daniel (6 January 2006)
Daniel (3 January 2006)
- Andres Garcia made the TFTP test server build with mingw.
-
-Daniel (16 December 2005)
-- Jean Jacques Drouin pointed out that you could only have a user name or
- password of 127 bytes or less embedded in a URL, where actually the code
- uses a 255 byte buffer for it! Modified now to use the full buffer size.
-
-Daniel (12 December 2005)
-- Dov Murik corrected the HTTP_ONLY define to disable the TFTP support properly
-
-Version 7.15.1 (7 December 2005)
-
-Daniel (6 December 2005)
-- Full text here: http://curl.haxx.se/docs/adv_20051207.html Pointed out by
- Stefan Esser.
-
- VULNERABILITY
-
- libcurl's URL parser function can overflow a malloced buffer in two ways, if
- given a too long URL.
-
- These overflows happen if you
-
- 1 - pass in a URL with no protocol (like "http://") prefix, using no slash
- and the string is 256 bytes or longer. This leads to a single zero byte
- overflow of the malloced buffer.
-
- 2 - pass in a URL with only a question mark as separator (no slash) between
- the host and the query part of the URL. This leads to a single zero byte
- overflow of the malloced buffer.
-
- Both overflows can be made with the same input string, leading to two single
- zero byte overwrites.
-
- The affected flaw cannot be triggered by a redirect, but the long URL must
- be passed in "directly" to libcurl. It makes this a "local" problem. Of
- course, lots of programs may still pass in user-provided URLs to libcurl
- without doing much syntax checking of their own, allowing a user to exploit
- this vulnerability.
-
- There is no known exploit at the time of this writing.
-
-
-Daniel (2 December 2005)
-- Jamie Newton pointed out that libcurl's file:// code would close() a zero
- file descriptor if given a non-existing file.
-
-Daniel (24 November 2005)
-- Doug Kaufman provided a set of patches to make curl build fine on DJGPP
- again using configure.
-
-- Yang Tse provided a whole series of patches to clear up compiler warnings on
- MSVC 6.
-
-Daniel (17 November 2005)
-- I extended a patch from David Shaw to make libcurl _always_ provide an error
- string in the given error buffer to address the flaw mention on 21 sep 2005.
-
-Daniel (16 November 2005)
-- Applied Albert Chin's patch that makes the libcurl.pc pkgconfig file get
- installed on 'make install' time.
-
-Daniel (14 November 2005)
-- Quagmire reported that he needed to raise a NTLM buffer for SSPI to work
- properly for a case, and so we did. We raised it even for non-SSPI builds
- but it should not do any harm. http://curl.haxx.se/bug/view.cgi?id=1356715
-
-- Jan Kunder's debian bug report
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=338680 identified a weird
- error message for when you try to upload a file and the requested directory
- doesn't exist on the target server.
-
-- Yang Tse fixed compiler warnings in lib/ssluse.c with OpenSSL 0.9.8 and in
- lib/memdebug.h that showed up in his msvc builds.
-
-Daniel (13 November 2005)
-- Debian bug report 338681 by Jan Kunder: make curl better detect and report
- bad limit-rate units:
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=338681 Now curl will return
- error if a bad unit is used.
-
-- Thanks to this nice summary of poll() implementations:
- http://www.greenend.org.uk/rjk/2001/06/poll.html and further tests by Eugene
- Kotlyarov, we now know that cygwin's poll returns only POLLHUP on remote
- connectin closure so we check for that case (too) and re-enable poll for
- cygwin builds.
-
-Daniel (12 November 2005)
-- Eugene Kotlyarov found out that cygwin's poll() function isn't doing things
- right: http://curl.haxx.se/mail/archive-2005-11/0045.html so we now disable
- poll() and use select() on cygwin too (we already do the same choice on Mac
- OS X)
-
-- Dima Barsky patched problem #1348930: the GnuTLS code completely ignored
- client certificates! (http://curl.haxx.se/bug/view.cgi?id=1348930).
-
-Daniel (10 November 2005)
-- David Lang fixed IPv6 support for TFTP!
-
-- Introducing range stepping to the curl globbing support. Now you can specify
- step counter by adding :[num] within the brackets when specifying a range:
-
- [1-100:10]
- [a-z:2]
-
- If no step counter is set, it defaults to 1 as before:
-
- [1-100]
- [d-h]
-
-Daniel (8 November 2005)
-- Removed the use of AI_CANONNAME in the IPv6-enabled resolver functions since
- we really have no use for reverse lookups of the address.
-
- I truly hope these are the last reverse lookups we had lingering in the
- code!
-
-- Dmitry Bartsevich discovered some issues in compatibilty of SSPI-enabled
- version of libcurl with different Windows versions. Current version of
- libcurl imports SSPI functions from secur32.dll. However, under Windows NT
- 4.0 these functions are located in security.dll, under Windows 9x - in
- secur32.dll and Windows 2000 and XP contains both these DLLs (security.dll
- just forwards calls to secur32.dll).
-
- Dmitry's patch loads proper library dynamically depending on Windows
- version. Function InitSecurityInterface() is used to obtain pointers to all
- of SSPI function in one structure.
-
-Daniel (31 October 2005)
-- Vilmos Nebehaj improved libcurl's LDAP abilities:
-
- The LDAP code in libcurl can't handle LDAP servers of LDAPv3 nor binary
- attributes in LDAP objects. So, I made a quick patch to address these
- problems.
-
- The solution is simple: if we connect to an LDAP server, first try LDAPv3
- (which is the preferred protocol as of now) and then fall back to LDAPv2.
- In case of binary attributes, we first convert them to base64, just like the
- openldap client does. It uses ldap_get_values_len() instead of
- ldap_get_values() to be able to retrieve binary attributes correctly. I
- defined the necessary LDAP macros in lib/ldap.c to be able to compile
- libcurl without the presence of libldap
-
-Daniel (27 October 2005)
-- Nis Jorgensen filed bug report #1338648
- (http://curl.haxx.se/bug/view.cgi?id=1338648) which really is more of a
- feature request, but anyway. It pointed out that --max-redirs did not allow
- it to be set to 0, which then would return an error code on the first
- Location: found. Based on Nis' patch, now libcurl supports CURLOPT_MAXREDIRS
- set to 0, or -1 for infinity. Added test case 274 to verify.
-
-- tommink[at]post.pl reported in bug report #1337723
- (http://curl.haxx.se/bug/view.cgi?id=1337723) that curl could not upload
- binary data from stdin on Windows if the data contained control-Z (hex 1a)
- since that is treated as end-of-file when read in text mode. Gisle Vanem
- pointed out the fix, and I made both -T and --data-binary take advantage of
- it.
-
-- Jaz Fresh pointed out that if you used "-r [number]" as was wrongly described
- in the man page, curl would send an invalid HTTP Range: header. The correct
- way would be to use "-r [number]-" or even "-r -[number]". Starting now,
- curl will warn if this is discovered, and automatically append a dash to the
- range before passing it to libcurl.
-
-Daniel (25 October 2005)
-- Amol Pattekar reported a bug with great detail and a fine example in bug
- #1326306 (http://curl.haxx.se/bug/view.cgi?id=1326306). When using the multi
- interface and connecting to a host with multiple IP addresses, and one of
- the addresses fails to connect (the server must exist and respond, just not
- accept connections) libcurl leaks a socket descriptor. Thanks to the fine
- report, I could find and fix this.
-
-Daniel (22 October 2005)
-- Dima Barsky reported a problem with GnuTLS-enabled libcurl in bug report
- #1334338 (http://curl.haxx.se/bug/view.cgi?id=1334338). When reading an SSL
- stream from a server and the server requests a "rehandshake", the current
- code simply returns this as an error. I have no good way to test this, but
- I've added a crude attempt of dealing with this situation slightly better -
- it makes a blocking handshake if this happens. Done like this because fixing
- this the "proper" way (that would handshake asynchronously) will require
- quite some work and I really need a good way to test this to do such a
- change.
-
-Daniel (21 October 2005)
-- "Ofer" reported a problem when libcurl re-used a connection and failed to do
- it, it could then accidentally actually crash. Presumably, this concerns FTP
- connections. http://curl.haxx.se/bug/view.cgi?id=1330310
-
-- Temprimus improved the MSVC makefile so that the static debug SSL libs are
- linked to the executable and not to the libcurld.lib
- http://curl.haxx.se/bug/view.cgi?id=1326676
-
-- Bradford Bruce made the windows resolver code properly return
- CURLE_COULDNT_RESOLVE_PROXY and CURLE_COULDNT_RESOLVE_HOST on resolving
- errors (as documented).
-
-Daniel (20 October 2005)
-- Dave Dribin made libcurl understand and handle cases when the server
- (wrongly) sends *two* WWW-Authenticate headers for Digest. While this should
- never happen in a sane world, libcurl previously got into an infinite loop
- when this occurred. Dave added test 273 to verify this.
-
-- Temprimus improved the MSVC makefile: "makes a build option available so if
- you set rtlibcfg=static for the make, then it would build with /MT. The
- default behaviour is /MD (the original)."
- http://curl.haxx.se/bug/view.cgi?id=1326665
-
-Daniel (14 October 2005)
-- Reverted the LIBCURL_VERSION_NUM change from October 6. As Dave Dribin
- reported, the define is used by the configure script and is assumed to use
- the 0xYYXXZZ format. This made "curl-config --vernum" fail in the 7.15.0
- release version.
-
-Version 7.15.0 (13 October 2005)
-
-Daniel (12 October 2005)
-- Michael Sutton of iDEFENSE reported and I fixed a securitfy flaw in the NTLM
- code that would overflow a buffer if given a too long user name or domain
- name. This would happen if you enable NTLM authentication and either
-
- A - pass in a user name and domain name to libcurl that together are longer
- than 192 bytes
-
- B - allow (lib)curl to follow HTTP "redirects" (Location: and the
- appropriate HTTP 30x response code) and the new URL contains a URL with
- a user name and domain name that together are longer than 192 bytes
-
- See http://curl.haxx.se/docs/security.html for further details and updates
-
-Daniel (5 October 2005)
-- Darryl House reported a problem with using -z to download files from FTP.
- It turned out that if the given time stamp was exact the same as the remote
- time stamp, the file would still wrongly be downloaded. Added test case 272
- to verify.
-
-Daniel (4 October 2005)
-- Domenico Andreoli fixed a man page malformat and removed odd (0xa0) bytes
- from the configure script.
-
-- Michael Wallner reported that the date parser had wrong offset stored for
- the MEST and CEST time zones.
-
-Daniel (27 September 2005)
-- David Yan filed bug #1299181 (http://curl.haxx.se/bug/view.cgi?id=1299181)
- that identified a silly problem with Content-Range: headers with the 'bytes'
- keyword written in a different case than all lowercase! It would cause a
- segfault!
-
-- TJ Saunders of the proftpd project identified and pointed out problems with
- the modified FTPS negotiation change of August 19 2005. Thus, we revert the
- change back to pre-7.14.1 status.
-
-Daniel (21 September 2005)
-- Fixed "cut off" sentence in the libcurl-tutorial man page:
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329305
-
-- Clarified in the curl_easy_setopt man page what the default
- CURLOPT_WRITEFUNCTION and CURLOPT_WRITEDATA mean:
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329311
-
-- Clarified in the curl_easy_setopt man page that CURLOPT_ERRORBUFFER
- sometimes doesn't fill in the buffer even though it is supposed to:
- http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=329313
-
-- When CURLE_URL_MALFORMAT is returned due to a missing URL, it now has an
- error string set.
-
-Daniel (19 September 2005)
-- Dmitry Bartsevich made the SSPI support work on Windows 9x as well.
-
-Daniel (15 September 2005)
-- Added a TFTP server to the test suite and made the test suite capable of
- using it.
-
-Daniel (7 September 2005)
-- Ben Madsen's detailed reports that funnily enough only occurred with certain
- glibc versions turned out to be curl using an already closed file handle
- during certain conditions (like when saving FTP server "headers").
-
-- Scott Davis helped me track down a problem in the test HTTP server that made
- test case 56 wrongly fail at times. It turned out it was due to the server
- finding the end of a chunked-encoded POST too early.
-
-Daniel (6 September 2005)
-- Now curl warns if an unknown variable is used in the -w/--writeout argument.
-
-Daniel (4 September 2005)
-- I applied Nicolas François' man page patch he posted to the Debian bug
- tracker. It corrected two lines that started with apostrophes, which isn't
- legal nroff format. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=326511
-
-- Added --ftp-skip-pasv-ip to the command line tool, that sets the new
- CURLOPT_FTP_SKIP_PASV_IP option. It makes libcurl re-use the control
- connection's IP address when setting up the data connection instead of
- extractting the IP address from the PASV response. It has turned out this
- feature is frequently needed by people to circumvent silly servers and silly
- firewalls, especially when FTPS is used and the PASV command-response is
- sent encrtyped.
-
- Sponsored by CU*Answers
-
-Daniel (1 September 2005)
-- John Kelly added TFTP support to libcurl. A bunch of new error codes was
- added. TODO: add them to docs. add TFTP server to test suite. add TFTP to
- list of protocols whereever those are mentioned.
-
-Version 7.14.1 (1 September 2005)
-
-Daniel (29 August 2005)
-- Kevin Lussier pointed out a problem with curllib.dsp and how to fix it.
-
-- Igor Polyakov fixed a rather nasty problem with the threaded name resolver
- for Windows, that could lead to an Access Violation when the multi interface
- was used due to an issue with how the resolver thread was and was not
- terminated.
-
-- Simon Josefsson brought a patch that allows curl to get built to use GNU GSS
- instead of MIT/Heimdal for GSS capabilities.
-
-Daniel (24 August 2005)
-- Toby Peterson added CURLOPT_IGNORE_CONTENT_LENGTH to the library, accessible
- from the command line tool with --ignore-content-length. This will make it
- easier to download files from Apache 1.x (and similar) servers that are
- still having problems serving files larger than 2 or 4 GB. When this option
- is enabled, curl will simply have to wait for the server to close the
- connection to signal end of transfer. I wrote test case 269 that runs a
- simple test to verify that this works.
-
-- (Trying hard to exclude emotions now.) valgrind version 3 suddenly renamed
- the --logfile command line option to --log-file, and thus the test script
- valgrind autodetection now has yet another version check to do and then it
- alters the valgrind command line accordingly.
-
-- Fixed CA cert verification using GnuTLS with the default bundle, which
- previously failed due to GnuTLS not allowing x509 v1 CA certs by default.
- Ralph Mitchell reported.
-
-Daniel (19 August 2005)
-- Norbert Novotny had problems with FTPS and he helped me work out a patch
- that made curl run fine in his end. The key was to make sure we do the
- SSL/TLS negotiation immediately after the TCP connect is done and not after
- a few other commands have been sent like we did previously. I don't consider
- this change necessary to obey the standards, I think this server is pickier
- than what the specs allow it to be, but I can't see how this modified
- libcurl code can add any problems to those who are interpreting the
- standards more liberally.
-
-Daniel (17 August 2005)
-- Jeff Pohlmeyer found out that if you ask libcurl to load a cookiefile (with
- CURLOPT_COOKIEFILE), add a cookie (with CURLOPT_COOKIELIST), tell it to
- write the result to a given cookie jar and then never actually call
- curl_easy_perform() - the given file(s) to read was never read but the
- output file was written and thus it caused a "funny" result.
-
-- While doing some tests for the bug above, I noticed that Firefox generates
- large numbers (for the expire time) in the cookies.txt file and libcurl
- didn't treat them properly. Now it does.
-
-Daniel (15 August 2005)
-- Added more verbose "warning" messages to the curl client for cases where it
- fails to open/read files etc to help users diagnose why it doesn't do what
- you'd expect it to. Converted lots of old messages to use the new generic
- function I wrote for this purpose.
-
-Daniel (13 August 2005)
-- James Bursa identified a libcurl HTTP bug and a good way to repeat it. If a
- site responds with bad HTTP response that doesn't contain any header at all,
- only a response body, and the write callback returns 0 to abort the
- transfer, it didn't have any real effect but the write callback would be
- called once more anyway.
-
-Daniel (12 August 2005)
-- Based on Richard Clayton's reports, I found out that using curl -d @filename
- when 'filename' was not possible to access made curl use a GET request
- instead.
-
-- The time condition illegal syntax warning is now inhibited if -s is used.
-
-Daniel (10 August 2005)
-- Mario Schroeder found out that one of the debug callbacks calls that regards
- SSL data with the CURLINFO_TEXT type claimed that the data was one byte
- larger than it actually is, thus falsely telling the application that the
- terminating zero was part of the data.
-
-Daniel (9 August 2005)
-- Christopher R. Palmer fixed the offsets used for date parsings when the time
- zone name of a daylight savings time was used. For example, PDT vs PDS. This
- flaw was introduced with the new date parser (11 sep 2004 - 7.12.2).
- Fortunately, no web server or cookie string etc should be using such time
- zone names thus limiting the effect of this bug.
-
-Daniel (8 August 2005)
-- Jon Grubbs filed bug report #1249962
- (http://curl.haxx.se/bug/view.cgi?id=1249962) which identified a problem
- with NTLM on a HTTP proxy if an FTP URL was given. libcurl now properly
- switches to pure HTTP internally when an HTTP proxy is used, even for FTP
- URLs. The problem would also occur with other multi-pass auth methods.
-
-Daniel (7 August 2005)
-- When curl is built with GnuTLS, curl-config didn't include "SSL" when
- --features was used.
-
-Daniel (28 July 2005)
-- If any of the options CURLOPT_HTTPGET, CURLOPT_POST and CURLOPT_HTTPPOST is
- set to 1, CURLOPT_NOBODY will now automatically be set to 0.
-
-Daniel (27 July 2005)
-- Dan Fandrich changes over the last week: fixed numerous minor configure
- option parsing flaws: --without-gnutls, --without-spnego --without-gssapi
- and --without-krb4. Spellfixed several error messages.
-
-- Peteris Krumins added CURLOPT_COOKIELIST and CURLINFO_COOKIELIST, which is a
- simple interface to extracting and setting cookies in libcurl's internal
- "cookie jar". See the new cookie_interface.c example code.
-
-Daniel (13 July 2005)
-- Diego Casorran provided patches to make curl build fine on Amiga again.
-
-Daniel (12 July 2005)
-- Adrian Schuur added trailer support in the chunked encoding stream. The
- trailer is then sent to the normal header callback/stream. I wrote up test
- case 266 to verify the basic functionality. Do note that test case 34
- contains a flawed chunked encoding stream that still works the same.
-
-Daniel (5 July 2005)
-- Gisle Vanem came up with a nice little work-around for bug #1230118
- (http://curl.haxx.se/bug/view.cgi?id=1230118). It seems the Windows (MSVC)
- libc time functions may return data one hour off if TZ is not set and
- automatic DST adjustment is enabled. This made curl_getdate() return wrong
- value, and it also concerned internal cookie expirations etc.
-
-Daniel (4 July 2005)
-- Andrew Bushnell provided enough info for me to tell that we badly needed to
- fix the CONNECT authentication code with multi-pass auth methods (such as
- NTLM) as it didn't previously properly ignore response-bodies - in fact it
- stopped reading after all response headers had been received. This could
- lead to libcurl sending the next request and reading the body from the first
- request as response to the second request. (I also renamed the function,
- which wasn't strictly necessary but...)
-
- The best fix would to once and for all make the CONNECT code use the
- ordinary request sending/receiving code, treating it as any ordinary request
- instead of the special-purpose function we have now. It should make it
- better for multi-interface too. And possibly lead to less code...
-
- Added test case 265 for this. It doesn't work as a _really_ good test case
- since the test proxy is too stupid, but the test case helps when running the
- debugger to verify.
-
-Daniel (30 June 2005)
-- Dan Fandrich improved the configure script's ability to figure out what kind
- of strerror_r() API that is used when cross-compiling. If __GLIB__ is
- defined, it assumes the glibc API. If not, it issues a notice as before that
- the user needs to manually edit lib/config.h for this.
-
-Daniel (23 June 2005)
-- David Shaw's fix that unifies proxy string treatment so that a proxy given
- with CURLOPT_PROXY can use a http:// prefix and user + password. The user
- and password fields are now also URL decoded properly. Test case 264 added
- to verify.
-
-Daniel (22 June 2005)
-- David Shaw updated libcurl.m4
-
-Daniel (14 June 2005)
-- Gisle Vanem fixed a potential thread handle leak. Bug report #1216500
- (http://curl.haxx.se/bug/view.cgi?id=1216500). Comment in
- http://curl.haxx.se/mail/lib-2005-06/0059.html
-
-Daniel (13 June 2005)
-- Made buildconf run libtoolize in the ares dir too (inspired by Tupone's
- reverted patch).
-
-Daniel (9 June 2005)
-- Incorporated Tupone's findtool fix in buildconf (slightly edited)
-
-- Incorporated Tupone's head -n fix in buildconf.
-
-Daniel (8 June 2005)
-- Reverted Tupone's patch again, it broke numerous autobuilds. Let's apply it
- in pieces, one by one and see what we need to adjust to work all over.
-
-Daniel (6 June 2005)
-- Tupone Alfredo fixed three problems in buildconf:
-
- 1) findtool does look per tool in PATH and think ./perl is the perl
- executable, while is just a local directory (I have . in the PATH)
-
- 2) I got several warning for head -1 deprecated in favour of head -n 1
-
- 3) ares directory is missing some file (missing is missing :-) ) because
- automake and friends is not run.
-
-Daniel (3 June 2005)
-- Added docs/libcurl/getinfo-times, based on feedback from 'Edi':
- http://curl.haxx.se/feedback/display.cgi?id=11178325798299&support=yes
-
-- Andres Garcia provided yet another text mode patch for several test cases so
- that they do text comparisions better on Windows (newline-wise).
-
-Daniel (1 June 2005)
-- The configure check for c-ares now adds the cares lib before the other libs,
- to make it build fine with mingw. Inspired by Tupone Alfredo's bug report
- and patch: http://curl.haxx.se/bug/view.cgi?id=1212940
-
-Daniel (31 May 2005)
-- Todd Kulesza reported a flaw in the proxy option, since a numerical IPv6
- address was not possible to use. It is now, but requires it written
- RFC2732-style, within brackets - which incidently is how you enter numerical
- IPv6 addresses in URLs. Test case 263 added to verify.
-
-Daniel (30 May 2005)
-- Eric Cooper reported about a problem with HTTP servers that responds with
- binary zeroes within the headers. They confused libcurl to do wrong so the
- downloaded headers become incomplete. The fix is now verified with test case
- 262. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=310948
-
-Daniel (25 May 2005)
-- Fixed problems with the test suite, and in particular the FTP test cases
- since it previously was failing every now and then in a nonsense manner.
-
-- --trace-time now outputs the full microsecond, all 6 digits.
-
-Daniel (24 May 2005)
-- Andres Garcia provided a text mode patch for several test cases so that they
- do text comparisions better on Windows (newline-wise).
-
-- Any 2xx response (and not just 200) is now considered a fine response to
- TYPE, as some servers obviously sends a 226 there. Added test case 261 to
- verify. Based on a question/report by Georg Wicherski.
-
-Daniel (20 May 2005)
-- Improved runtests.pl to allow stdout tests to be mode=text as well, just
- as file comparisons already supports. Added this info to the FILEFORMAT
- docs.
-
-Daniel (18 May 2005)
-- John McGowan identified a problem in bug report #1204435
- (http://curl.haxx.se/bug/view.cgi?id=1204435) with malformed URLs like
- "http://somehost?data" as it added a slash too much in the request ("GET
- /?data/"...). Added test case 260 to verify.
-
-- The configure check for strerror_r() failed to detect the proper API at
- times, like on HP-UX 10.20. Then lib/strerror.c badly assumed the glibc
- version if the posix define wasn't set (since it _had_ found a strerror_r).
-
-Daniel (16 May 2005)
-- The gmtime_r() function in HP-UX 10.20 is broken. About 13 test cases fail
- due to this. There's now a configure check that attempts to detect the bad
- function and not use it on such systems.
-
-Version 7.14.0 (16 May 2005)
-
-Daniel (13 May 2005)
-- Grigory Entin reported that curl's configure detects a fine poll() for Mac
- OS X 10.4 (while 10.3 or later detected a "bad" one), but the executable
- doesn't work as good as if built without poll(). I've adjusted the configure
- to always skip the fine-poll() test on Mac OS X (darwin).
-
-Daniel (12 May 2005)
-- When doing a second request (after a disconnect) using the same easy handle,
- over a proxy that uses NTLM authentication, libcurl failed to use NTLM again
- properly (the auth method was accidentally reset to the same as had been set
- for host auth, which defaults to Basic). Bug report #1200661
- (http://curl.haxx.se/bug/view.cgi?id=1200661) identified the the problem and
- the fix.
-
-- If -z/--time-cond is used with an invalid date syntax, this is no longer
- silently discarded. Instead a proper warning message is diplayed that
- informs about it. But it still continues without the condition.
-
-Version 7.14.0-pre2 (11 May 2005)
-
-Daniel (11 May 2005)
-- Starting now, libcurl sends a little different set of headers in its default
- HTTP requests:
-
- A) Normal non-proxy HTTP:
- - no more "Pragma: no-cache" (this only makes sense to proxies)
-
- B) Non-CONNECT HTTP request over proxy:
- - "Pragma: no-cache" is used (like before)
- - "Proxy-Connection: Keep-alive" (for older style 1.0-proxies)
-
- C) CONNECT HTTP request over proxy:
- - "Host: [name]:[port]"
- - "Proxy-Connection: Keep-alive"
-
- The A) case is mostly to reduce the default header size and remove a
- pointless header.
-
- The B) is to address (rare) problems with HTTP 1.0 proxies
-
- The C) headers are both to address (rare) problems with some proxies. The
- code in libcurl that deals with CONNECT requests need a rewrite, but it
- feels like a too big a job for me to do now. Details are added in the code
- comments for now.
-
- Updated a large amount of test cases to reflect the news.
-
-Daniel (10 May 2005)
-- Half-baked attempt to bail out if select() returns _only_ errorfds when the
- transfer is in progress. An attempt to fix Allan's problem. See
- http://curl.haxx.se/mail/lib-2005-05/0073.html and the rest of that thread
- for details.
-
- I'm still not sure this is the right fix, but...
-
-Version 7.14.0-pre1 (9 May 2005)
-
-Daniel (2 May 2005)
-- Sort of "fixed" KNOWN_BUGS #4: curl now builds IPv6 enabled on AIX 4.3. At
- least it should no longer cause a compiler error. However, it does not have
- AI_NUMERICHOST so we cannot getaddrinfo() any numerical addresses with it
- (we use that for FTP PORT/EPRT)! So, I modified the configure check that
- checks if the getaddrinfo() is working, to use AI_NUMERICHOST since then
- it'll fail on AIX 4.3 and it will automatically build with IPv6 support
- disabled.
-
-- Added --trace-time that when used adds a time stamp to each trace line that
- --trace, --trace-ascii and --verbose output. I also made the '>' display
- separate each line on the linefeed so that HTTP requests etc look nicer in
- the -v output.
-
-- Made curl recognize the environment variables Lynx (and others?) support for
- pointing out the CA cert path/file: SSL_CERT_DIR and SSL_CERT_FILE. If
- CURL_CA_BUNDLE is not set, they are checked afterwards.
-
- Like before: on windows if none of these are set, it checks for the ca cert
- file like this:
-
- 1. application's directory
- 2. current working directory
- 3. Windows System directory (e.g. C:\windows\system32)
- 4. Windows Directory (e.g. C:\windows)
- 5. all directories along %PATH%
-
-Daniel (1 May 2005)
-- The runtests.pl script now starts test servers by doing fork() and exec()
- instead of the previous approach. This is less complicated and should
- hopefully lead to less "leaked" servers (servers that aren't stopped
- properly when the tests are stopped).
-
-- Alexander Zhuravlev found a case when you did "curl -I [URL]" and it
- complained on the chunked encoding, even though a HEAD should never return a
- body and thus it cannot be a chunked-encoding problem!
-
-Daniel (30 April 2005)
-- Alexander Zhuravlev found out that (lib)curl SIGSEGVed when using
- --interface on an address that can't be bound.
-
-Daniel (28 April 2005)
-- Working on fixing up test cases to mark sections as 'mode=text' for things
- that curl writes as text files, since then they can get different line
- endings depending on OS. Andrés García helps me work this out.
-
- Did lots of other minor tweaks on the test scripts to work better and more
- reliably find test servers and also kill test servers.
-
-- Dan Fandrich pointed out how the runtests.pl script killed the HTTP server
- instead of the HTTPS server when closing it down.
-
-Daniel (27 April 2005)
-- Paul Moore made curl check for the .curlrc file (_curlrc on windows) on two
- more places. First, CURL_HOME is a new environment variable that is used
- instead of HOME if it is set, to point out where the default config file
- lives. If there's no config file in the dir pointed out by one of the
- environment variables, the Windows version will instead check the same
- directory the executable curl is located in.
-
-Daniel (26 April 2005)
-- Cory Nelson's work on nuking compiler warnings when building on x64 with
- VS2005.
-
-Daniel (25 April 2005)
-- Fred New reported a bug where we used Basic auth and user name and password
- in .netrc, and when following a Location: the subsequent requests didn't
- properly use the auth as found in the netrc file. Added test case 257 to
- verify my fix.
-
-- Based on feedback from Cory Nelson, I added some preprocessor magic in
- */setup.h and */config-win32.h to build fine with VS2005 on x64.
-
-Daniel (23 April 2005)
-- Alex Suykov made the curl tool now assume that uploads using HTTP:// or
- HTTPS:// are the only ones that show output and thus motivates a switched
- off progress meter if the output is sent to the terminal. This makes FTP
- uploads without '>', -o or -O show the progress meter.
-
-Daniel (22 April 2005)
-- Dave Dribin's MSVC makefile fix: set CURL_STATICLIB when it builds static
- library variants.
-
-- Andres Garcia fixed configure to set the proper define when building static
- libcurl on windows.
-
-- --retry-delay didn't work.
-
-Daniel (18 April 2005)
-- Olivier reported that even though he used CURLOPT_PORT, libcurl clearly
- still used the default port. He was right. I fixed the problem and added the
- test cases 521, 522 and 523 to verify the fix.
-
-- Toshiyuki Maezawa reported that when doing a POST with a read callback,
- libcurl didn't properly send an Expect: 100-continue header. It does now.
-
-- I committed by mig change in the test suite's FTP server that moves out all
- socket/TCP code to a separate C program named sockfilt. And added 4 new
- test cases for FTP over IPv6.
-
-Daniel (8 April 2005)
-- Cory Nelson reported a problem with a HTTP server that responded with a 304
- response containing an "illegal" Content-Length: header, which was not
- properly ignored by libcurl. Now it is. Test case 249 verifies.
-
-Daniel (7 April 2005)
-- Added ability to build and run with GnuTLS as an alternative to OpenSSL for
- the secure layer. configure --with-gnutls enables with. Note that the
- previous OpenSSL check still has preference and if it first detects OpenSSL,
- it will not check for GnuTLS. You may need to explictly diable OpenSSL with
- --without-ssl.
-
- This work has been sponsored by The Written Word.
-
-Daniel (5 April 2005)
-- Christophe Legry fixed the post-upload check for FTP to not complain if the
- upload was skipped due to a time-condition as set with
- CURLOPT_TIMECONDITION. I added test case 247 and 248 to verify.
-
-Version 7.13.2 (5 April 2005)
-
-Daniel (4 April 2005)
-- Marcelo Juchem fixed the MSVC makefile for libcurl
-
-- Gisle Vanem fixed a crash in libcurl, that could happen if the easy handle
- was killed before the threading resolver (windows only) still hadn't
- completed.
-
-- Hardeep Singh reported a problem doing HTTP POST with Digest. (It was
- actually also affecting NTLM and Negotiate.) It turned out that if the
- server responded with 100 Continue before the initial 401 response, libcurl
- didn't take care of the response properly. Test case 245 and 246 added to
- verify this.
-
-Daniel (30 March 2005)
-- Andres Garcia modified the configure script to check for libgdi32 before
- libcrypto, to make the SSL check work fine on msys/mingw.
-
-Daniel (29 March 2005)
-- Tom Moers identified a flaw when you sent a POST with Digest authentication,
- as in the first request when curl sends a POST with Content-Length: 0, it
- still forcibly closed the connection before doing the next step in the auth
- negotiation.
-
-- Jesper Jensen found out that FTP-SSL didn't work since my FTP
- rewrite. Fixing that was easy, but it also revealed a much worse problem:
- the FTP server response reader function didn't properly deal with reading
- responses in multiple tiny chunks properly! I modified the FTP server to
- allow it to produce such split-up responses to make sure curl deals with
- them as it should.
-
-- Based on Augustus Saunders' comments and findings, the HTTP output auth
- function was fixed to use the proper proxy authentication when multiple ones
- are accepted. test 239 and test 243 were added to repeat the problems and
- verify the fixes.
-
- --proxy-anyauth was added to the curl tool
-
-Daniel (16 March 2005)
-- Tru64 and some IRIX boxes seem to not like test 237 as it is. Their
- inet_addr() functions seems to use &255 on all numericals in a ipv4 dotted
- address which makes a different failure... Now I've modified the ipv4
- resolve code to use inet_pton() instead in an attempt to make these systems
- better detect this as a bad IP address rather than creating a toally bogus
- address that is then passed on and used.
-
-Daniel (15 March 2005)
-- Dan Fandrich made the code properly use the uClibc's version of
- inet_ntoa_r() when built with it.
-
-- Added test 237 and 238: test EPSV and PASV response handling when they get
- well- formated data back but using illegal values. In 237 PASV gets an IP
- address that is way bad. In 238 EPSV gets a port that is way out of range.
-
-Daniel (14 March 2005)
-- Added a few missing features to the curl-config --features list
-
-- Modified testcurl.pl to now offer
- 1 - command line options for all info it previously only read from
- file: --name, --email, --desc and --configure
- 2 - --nocvsup makes it not attempt to do cvs update
- 3 - --crosscompile informs it and makes it not attempt things it can't do
-
-- Fixed numerous win32 compiler warnings.
-
-- Removed the lib/security.h file since it shadowed the mingw/win32 header
- with the same name which is needed for SSPI builds. The contents of the
- former security.h is now i krb4.h
-
-- configure --enable-sspi now enables SSPI in the build. It only works for
- windows builds (including cross-compiles for windows).
-
-Daniel (12 March 2005)
-- David Houlder added --form-string that adds that string to a multipart
- formpost part, without special characters having special meanings etc like
- --form features.
-
-Daniel (11 March 2005)
-- curl_version_info() returns the feature bit CURL_VERSION_SSPI if it was
- built with SSPI support.
-
-- Christopher R. Palmer made it possible to build libcurl with the
- USE_WINDOWS_SSPI on Windows, and then libcurl will be built to use the
- native way to do NTLM. SSPI also allows libcurl to pass on the current user
- and its password in the request.
-
-Daniel (9 March 2005)
-- Dan F improved the SSL lib setup in configure.
-
-- Nodak Sodak reported a crash when using a SOCKS4 proxy.
-
-- Jean-Marc Ranger pointed out an embarassing debug printf() leftover in the
- multi interface code.
-
-- Adjusted the man page for the curl_getdate() return value for dates after
- year 2038. For 32 bit time_t it returns 0x7fffffff but for 64bit time_t it
- returns either the correct value or even -1 on some systems that still seem
- to not deal with this properly. Tor Arntsen found a 64bit AIX system for us
- that did the latter. Gwenole Beauchesne's Mandrake patch put the lights on
- this problem in the first place.
-
-Daniel (8 March 2005)
-- Dominick Meglio reported that using CURLOPT_FILETIME when transferring a FTP
- file got a Last-Modified: header written to the data stream, corrupting the
- actual data. This was because some conditions from the previous FTP code was
- not properly brought into the new FTP code. I fixed and I added test case
- 520 to verify. (This bug was introduced in 7.13.1)
-
-- Dan Fandrich fixed the configure --with-zlib option to always consider the
- given path before any standard paths.
-
-Daniel (6 March 2005)
-- Randy McMurchy was the first to report that valgrind.pm was missing from the
- release archive and thus 'make test' fails.
-
-Daniel (5 March 2005)
-- Dan Fandrich added HAVE_FTRUNCATE to several config-*.h files.
-
-- Added test case 235 that makes a resumed upload of a file that isn't present
- on the remote side. This then converts the operation to an ordinary STOR
- upload. This was requested/pointed out by Ignacio Vazquez-Abrams.
-
- It also proved (and I fixed) a bug in the newly rewritten ftp code (and
- present in the 7.13.1 release) when trying to resume an upload and the
- servers returns an error to the SIZE command. libcurl then loops and sends
- SIZE commands infinitely.
-
-- Dan Fandrich fixed a SSL problem introduced on February 9th that made
- libcurl attempt to load the whole random file to seed the PRNG. This is
- really bad since this turns out to be using /dev/urandom at times...
-
-Version 7.13.1 (4 March 2005)
-
-Daniel (4 March 2005)
-- Dave Dribin made it possible to set CURLOPT_COOKIEFILE to "" to activate
- the cookie "engine" without having to provide an empty or non-existing file.
-
-- Rene Rebe fixed a -# crash when more data than expected was retrieved.
-
-Daniel (22 February 2005)
-- NTLM and ftp-krb4 buffer overflow fixed, as reported here:
- http://www.securityfocus.com/archive/1/391042 and the CAN report here:
- http://cve.mitre.org/cgi-bin/cvename.cgi?name=CAN-2005-0490
-
- If these security guys were serious, we'd been notified in advance and we
- could've saved a few of you a little surprise, but now we weren't.
-
-Daniel (19 February 2005)
-- Ralph Mitchell reported a flaw when you used a proxy with auth, and you
- requested data from a host and then followed a redirect to another
- host. libcurl then didn't use the proxy-auth properly in the second request,
- due to the host-only check for original host name wrongly being extended to
- the proxy auth as well. Added test case 233 to verify the flaw and that the
- fix removed the problem.
-
-Daniel (18 February 2005)
-- Mike Dobbs reported a mingw build failure due to the lack of
- BUILDING_LIBCURL being defined when libcurl is built. Now this is defined by
- configure when mingw is used.
-
-Daniel (17 February 2005)
-- David in bug report #1124588 found and fixed a socket leak when libcurl
- didn't close the socket properly when returning error due to failing
- localbind
-
-Daniel (16 February 2005)
-- Christopher R. Palmer reported a problem with HTTP-POSTing using "anyauth"
- that picks NTLM. Thanks to David Byron letting me test NTLM against his
- servers, I could quickly repeat and fix the problem. It turned out to be:
-
- When libcurl POSTs without knowing/using an authentication and it gets back
- a list of types from which it picks NTLM, it needs to either continue
- sending its data if it keeps the connection alive, or not send the data but
- close the connection. Then do the first step in the NTLM auth. libcurl
- didn't send the data nor close the connection but simply read the
- response-body and then sent the first negotiation step. Which then failed
- miserably of course. The fixed version forces a connection if there is more
- than 2000 bytes left to send.
-
-Daniel (14 February 2005)
-- The configure script didn't check for ENGINE_load_builtin_engines() so it
- was never used.
-
-Daniel (11 February 2005)
-- Removed all uses of strftime() since it uses the localised version of the
- week day names and month names and servers don't like that.
-
-Daniel (10 February 2005)
-- Now the test script disables valgrind-testing when the test suite runs if
- libcurl is built shared. Otherwise valgrind only tests the shell that runs
- the wrapper-script named 'curl' that is a front-end to curl in this case.
- This should also fix the huge amount of reports of false positives when
- valgrind has identified leaks in (ba)sh and not in curl and people report
- that as curl bugs. Bug report #1116672 is one example.
-
- Also, the valgrind report parser has been adapted to check that at least one
- of the sources in a stack strace is one of (lib)curl's source files or
- otherwise it will not consider the problem to concern (lib)curl.
-
-- Marty Kuhrt streamlined the VMS build.
-
-Daniel (9 February 2005)
-- David Byron fixed his SSL problems, initially mentioned here:
- http://curl.haxx.se/mail/lib-2005-01/0240.html. It turned out we didn't use
- SSL_pending() as we should.
-
-- Converted lots of FTP code to a statemachine, so that the multi interface
- doesn't block while communicating commands-responses with an FTP server.
-
- I've added a comment like BLOCKING in the code on all spots I could find
- where we still have blocking operations. When we change curl_easy_perform()
- to use the multi interface, we'll also be able to simplify the code since
- there will only be one "internal interface".
-
- While doing this, I've now made CURLE_FTP_ACCESS_DENIED separate from the
- new CURLE_LOGIN_DENIED. The first one is now access denied to a function,
- like changing directory or retrieving a file, while the second means that we
- were denied login.
-
- The CVS tag 'before_ftp_statemachine' was set just before this went in, in
- case of future need.
-
-- Gisle made the DICT code send CRLF and not just LF as the spec says so.
-
-Daniel (8 February 2005)
-- Gisle fixed problems when libcurl runs out of memory, and worked on making
- sure the proper error code is returned for those occations.
-
-Daniel (7 February 2005)
-- Maruko pointed out a problem with inflate decompressing exactly 64K
- contents.
-
-Daniel (5 February 2005)
-- Eric Vergnaud found a use of an uninitialised variable in the ftp when doing
- PORT on ipv6-enabled hosts.
-
-- David Byron pointed out we could use BUFSIZE to read data (in
- lib/transfer.c) instead of using BUFSIZE -1.
-
-Version 7.13.0 (1 February 2005)
-
-Daniel (31 January 2005)
-- Added Lars Nilsson's htmltitle.cc example
-
-Daniel (30 January 2005)
-- Fixed a memory leak when using the multi interface and the DO operation
- failed (as in test case 205).
-
-- Fixed a valgrind warning for file:// operations.
-
-- Fixed a valgrind report in the url globbing code for the curl command line
- tool.
-
-- Bugfixed the parser that scans the valgrind report outputs (in runtests.pl).
- I noticed that it previously didn't detect and report the "Conditional jump
- or move depends on uninitialised value(s)" error. When I fixed this, I
- caught a few curl bugs with it. And then I had to spend time to make the
- test suite IGNORE these errors when OpenSSL is used since it produce massive
- amounts of valgrind warnings (but only of the "Conditional..." kind it
- seems). So, if a test that requires SSL is run, it ignores the
- "Conditional..." errors, and you'll get a "valgrind PARTIAL" output instead
- of "valgrind OK".
-
-Daniel (29 January 2005)
-- Using the multi interface, and doing a requsted a re-used connection that
- gets closed just after the request has been sent failed and did not re-issue
- a request on a fresh reconnect like the easy interface did. Now it does!
-
-- Define CURL_MULTIEASY when building libcurl (lib/easy.c to be exact), to use
- my new curl_easy_perform() that uses the multi interface to run the
- request. It is a great testbed for the multi interface and I believe we
- shall do it this way for real in the future when we have a successor to
- curl_multi_fdset(). I've used this approach to detect and fix several of the
- recent multi-interfaces issues.
-
-- Adjusted the KNOWN_BUGS #17 fix a bit more since the FTP code also did some
- bad assumptions.
-
-- multi interface: when a request is denied due to "Maximum redirects
- followed" libcurl leaked the last Location: URL.
-
-- Connect failures with the multi interface was often returned as "connect()
- timed out" even though the reason was different.
-
-Daniel (28 January 2005)
-- KNOWN_BUGS #17 fixed. A DNS cache entry may not remain locked between two
- curl_easy_perform() invokes. It was previously unlocked at disconnect, which
- could mean that it remained locked between multiple transfers. The DNS cache
- may not live as long as the connection cache does, as they are separate.
-
- To deal with the lack of DNS (host address) data availability in re-used
- connections, libcurl now keeps a copy of the IP adress as a string, to be
- able to show it even on subsequent requests on the same connection.
-
- The problem could be made to appear with this stunt:
-
- 1. create a multi handle
- 2. add an easy handle
- 3. fetch a URL that is persistent (leaves the connection alive)
- 4. remove the easy handle from the multi
- 5. kill the multi handle
- 6. create a multi handle
- 7. add the same easy handle to the new multi handle
- 8. fetch a URL from the same server as before (re-using the connection)
-
-- Stephen More pointed out that CURLOPT_FTPPORT and the -P option didn't work
- when built ipv6-enabled. I've now made a fix for it. Writing test cases for
- custom port hosts turned too tricky so unfortunately there's none.
-
-Daniel (25 January 2005)
-- Ian Ford asked about support for the FTP command ACCT, and I discovered it
- is present in RFC959... so now (lib)curl supports it as well. --ftp-account
- and CURLOPT_FTP_ACCOUNT set the account string. (The server may ask for an
- account string after PASS have been sent away. The client responds
- with "ACCT [account string]".) Added test case 228 and 229 to verify the
- functionality. Updated the test FTP server to support ACCT somewhat.
-
-- David Shaw contributed a fairly complete and detailed autoconf test you can
- use to detect libcurl and setup variables for the protocols the installed
- libcurl supports: docs/libcurl/libcurl.m4
-
-Daniel (21 January 2005)
-- Major FTP third party transfer overhaul.
-
- These four options are now obsolete: CURLOPT_SOURCE_HOST,
- CURLOPT_SOURCE_PATH, CURLOPT_SOURCE_PORT (this option didn't work before)
- and CURLOPT_PASV_HOST.
-
- These two options are added: CURLOPT_SOURCE_URL and CURLOPT_SOURCE_QUOTE.
-
- The target-side didn't use the proper path with RETR, and thus this only
- worked correctly in the login path (i.e without doing any CWD). The source-
- side still uses a wrong path, but the fix for this will need to wait. Verify
- the flaw by using a source URL with included %XX-codes.
-
- Made CURLOPT_FTPPORT control weather the target operation should use PORT
- (or not). The other side thus uses passive (PASV) mode.
-
- Updated the ftp3rdparty.c example source to use the updated options.
-
- Added support for a second FTP server in the test suite. Named... ftp2.
- Added test cases 230, 231 and 232 as a few first basic tests of very simple
- 3rd party transfers.
-
- Changed the debug output to include 'target' and 'source' when a 3rd party
- is being made, to make it clearer what commands/responses came on what
- connection.
-
- Added three new command line options: --3p-url, --3p-user and --3p-quote.
-
- Documented the command line options and the curl_easy_setopt options related
- to third party transfers.
-
- (Temporarily) disabled the ability to re-use an existing connection for the
- source connection. This is because it needs to force a new in case the
- source and target is the same host, and the host name check is trickier now
- when the source is identified with a full URL instead of a plain host name
- like before.
-
- TODO (short-term) for 3rd party transfers: quote support. The options are
- there, we need to add test cases to verify their functionality.
-
- TODO (long-term) for 3rd party transfers: IPv6 support (EPRT and EPSV etc)
- and SSL/TSL support.
-
-Daniel (20 January 2005)
-- Philippe Hameau found out that -Q "+[command]" didn't work, although some
- code was written for it. I fixed and added test case 227 to verify it.
- The curl.1 man page didn't mention the '+' so I added it.
-
-Daniel (19 January 2005)
-- Stephan Bergmann made libcurl return CURLE_URL_MALFORMAT if an FTP URL
- contains %0a or %0d in the user, password or CWD parts. (A future fix would
- include doing it for %00 as well - see KNOWN_BUGS for details.) Test case
- 225 and 226 were added to verify this
-
-- Stephan Bergmann pointed out two flaws in libcurl built with HTTP disabled:
-
- 1) the proxy environment variables are still read and used to set HTTP proxy
-
- 2) you couldn't disable http proxy with CURLOPT_PROXY (since the option was
- disabled). This is important since apps may want to disable HTTP proxy
- without actually knowing if libcurl was built to disable HTTP or not.
-
- Based on Stephan's patch, both these issues should now be fixed.
-
-Daniel (18 January 2005)
-- Cody Jones' enhanced version of Samuel Díaz García's MSVC makefile patch was
- applied.
-
-Daniel (16 January 2005)
-- Alex aka WindEagle pointed out that when doing "curl -v dictionary.com", curl
- assumed this used the DICT protocol. While guessing protocols will remain
- fuzzy, I've now made sure that the host names must start with "[protocol]."
- for them to be a valid guessable name. I also removed "https" as a prefix
- that indicates HTTPS, since we hardly ever see any host names using that.
-
-Daniel (13 January 2005)
-- Inspired by Martijn Koster's patch and example source at
- http://www.greenhills.co.uk/mak/gentoo/curl-eintr-bug.c, I now made the
- select() and poll() calls properly loop if they return -1 and errno is
- EINTR. glibc docs for this is found here:
- http://www.gnu.org/software/libc/manual/html_node/Interrupted-Primitives.html
-
- This last link says BSD doesn't have this "effect". Will there be a problem
- if we do this unconditionally?
-
-Daniel (11 January 2005)
-- Dan Torop cleaned up a few no longer used variables from David Phillips'
- select() overhaul fix.
-
-- Cyrill Osterwalder posted a detailed analysis about a bug that occurs when
- using a custom Host: header and curl fails to send a request on a re-used
- persistent connection and thus creates a new connection and resends it. It
- then sent two Host: headers. Cyrill's analysis was posted here:
- http://curl.haxx.se/mail/archive-2005-01/0022.html
-
-- Bruce Mitchener identified (bug report #1099640) the never-ending SOCKS5
- problem with the version byte and the check for bad versions. Bruce has lots
- of clues on this, and based on his suggestion I've now removed the check of
- that byte since it seems to be able to contain 1 or 5.
-
-Daniel (10 January 2005)
-- Pavel Orehov reported memory problems with the multi interface in bug report
- #1098843. In short, a shared DNS cache was setup for a multi handle and when
- the shared cache was deleted before the individual easy handles, the latter
- cleanups caused read/writes to already freed memory.
-
-- Hzhijun reported a memory leak in the SSL certificate code, that leaked the
- remote certificate name when it didn't match the used host name.
-
-Gisle (8 January 2005)
-- Added Makefile.Watcom files (src/lib). Updated Makefile.dist.
-
-Daniel (7 January 2005)
-- Improved the test script's valgrind log parser to actually work! Also added
- the ability to disable the log scanner for specific test cases. Test case
- 509 results in numerous problems and leaks in OpenSSL and has to get it
- disabled.
-
-Daniel (6 January 2005)
-- Fixed a single-byte read out of bounds in test case 39 in the curl tool code
- (i.e not in the library).
-
-- Bug report #1097019 identified a problem when doing -d "data" with -G and
- sending it to two URLs with {}. Added test 199 to verify the fix.
-
-Daniel (4 January 2005)
-- Marty Kuhrt adjusted a VMS build script slightly
-
-- Kai Sommerfeld and Gisle Vanem fixed libcurl to build with IPv6 support on
- Win2000.
-
-Daniel (2 January 2005)
-- Alex Neblett updated the MSVC makefiles slightly.