aboutsummaryrefslogtreecommitdiff
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/INSTALL1108
-rw-r--r--docs/INSTALL.devcpp302
-rw-r--r--docs/INSTALL.md513
-rw-r--r--docs/Makefile.am12
4 files changed, 520 insertions, 1415 deletions
diff --git a/docs/INSTALL b/docs/INSTALL
index 4f6593116..ff260b1b1 100644
--- a/docs/INSTALL
+++ b/docs/INSTALL
@@ -6,1110 +6,4 @@
How To Compile
-Installing Binary Packages
-==========================
-
- Lots of people download binary distributions of curl and libcurl. This
- document does not describe how to install curl or libcurl using such a
- binary package. This document describes how to compile, build and install
- curl and libcurl from source code.
-
-Building from git
-=================
-
- If you get your code off a git repository, see the GIT-INFO file in the
- root directory for specific instructions on how to proceed.
-
-Unix
-====
-
- A normal Unix installation is made in three or four steps (after you've
- unpacked the source archive):
-
- ./configure
- make
- make test (optional)
- make install
-
- You probably need to be root when doing the last command.
-
- If you have checked out the sources from the git repository, read the
- GIT-INFO on how to proceed.
-
- Get a full listing of all available configure options by invoking it like:
-
- ./configure --help
-
- If you want to install curl in a different file hierarchy than /usr/local,
- you need to specify that already when running configure:
-
- ./configure --prefix=/path/to/curl/tree
-
- If you happen to have write permission in that directory, you can do 'make
- install' without being root. An example of this would be to make a local
- install in your own home directory:
-
- ./configure --prefix=$HOME
- make
- make install
-
- The configure script always tries to find a working SSL library unless
- explicitly told not to. If you have OpenSSL installed in the default search
- path for your compiler/linker, you don't need to do anything special. If
- you have OpenSSL installed in /usr/local/ssl, you can run configure like:
-
- ./configure --with-ssl
-
- If you have OpenSSL installed somewhere else (for example, /opt/OpenSSL)
- and you have pkg-config installed, set the pkg-config path first, like this:
-
- env PKG_CONFIG_PATH=/opt/OpenSSL/lib/pkgconfig ./configure --with-ssl
-
- Without pkg-config installed, use this:
-
- ./configure --with-ssl=/opt/OpenSSL
-
- If you insist on forcing a build without SSL support, even though you may
- have OpenSSL installed in your system, you can run configure like this:
-
- ./configure --without-ssl
-
- If you have OpenSSL installed, but with the libraries in one place and the
- header files somewhere else, you have to set the LDFLAGS and CPPFLAGS
- environment variables prior to running configure. Something like this
- should work:
-
- (with the Bourne shell and its clones):
-
- CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" \
- ./configure
-
- (with csh, tcsh and their clones):
-
- env CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" \
- ./configure
-
- If you have shared SSL libs installed in a directory where your run-time
- linker doesn't find them (which usually causes configure failures), you can
- provide the -R option to ld on some operating systems to set a hard-coded
- path to the run-time linker:
-
- env LDFLAGS=-R/usr/local/ssl/lib ./configure --with-ssl
-
- MORE OPTIONS
- ------------
-
- To force configure to use the standard cc compiler if both cc and gcc are
- present, run configure like
-
- CC=cc ./configure
- or
- env CC=cc ./configure
-
- To force a static library compile, disable the shared library creation
- by running configure like:
-
- ./configure --disable-shared
-
- To tell the configure script to skip searching for thread-safe functions,
- add an option like:
-
- ./configure --disable-thread
-
- If you're a curl developer and use gcc, you might want to enable more
- debug options with the --enable-debug option.
-
- curl can be built to use a whole range of libraries to provide various
- useful services, and configure will try to auto-detect a decent
- default. But if you want to alter it, you can select how to deal with
- each individual library.
-
- To build with GnuTLS for SSL/TLS, use both --without-ssl and
- --with-gnutls.
-
- To build with Cyassl for SSL/TLS, use both --without-ssl and
- --with-cyassl.
-
- To build with NSS for SSL/TLS, use both --without-ssl and --with-nss.
-
- To build with PolarSSL for SSL/TLS, use both --without-ssl and
- --with-polarssl.
-
- To build with axTLS for SSL/TLS, use both --without-ssl and --with-axtls.
-
- To build with GSS-API support, use --with-gssapi and have the MIT Kerberos
- or Heimdal packages installed.
-
- To get support for SCP and SFTP, build with --with-libssh2 and have
- libssh2 0.16 or later installed.
-
- To get Metalink support, build with --with-libmetalink and have the
- libmetalink packages installed.
-
- SPECIAL CASES
- -------------
-
- Some versions of uClibc require configuring with CPPFLAGS=-D_GNU_SOURCE=1
- to get correct large file support.
-
- The Open Watcom C compiler on Linux requires configuring with the variables:
-
- ./configure CC=owcc AR="$WATCOM/binl/wlib" AR_FLAGS=-q \
- RANLIB=/bin/true STRIP="$WATCOM/binl/wstrip" CFLAGS=-Wextra
-
-Win32
-=====
-
- Building Windows DLLs and C run-time (CRT) linkage issues
- ---------------------------------------------------------
-
- As a general rule, building a DLL with static CRT linkage is highly
- discouraged, and intermixing CRTs in the same app is something to
- avoid at any cost.
-
- Reading and comprehension of Microsoft Knowledge Base articles
- KB94248 and KB140584 is a must for any Windows developer. Especially
- important is full understanding if you are not going to follow the
- advice given above.
-
- KB94248 - How To Use the C Run-Time
- https://support.microsoft.com/kb/94248/en-us
-
- KB140584 - How to link with the correct C Run-Time (CRT) library
- https://support.microsoft.com/kb/140584/en-us
-
- KB190799 - Potential Errors Passing CRT Objects Across DLL Boundaries
- https://msdn.microsoft.com/en-us/library/ms235460
-
- If your app is misbehaving in some strange way, or it is suffering
- from memory corruption, before asking for further help, please try
- first to rebuild every single library your app uses as well as your
- app using the debug multithreaded dynamic C runtime.
-
- If you get linkage errors read section 5.7 of the FAQ document.
-
- MingW32
- -------
-
- Make sure that MinGW32's bin dir is in the search path, for example:
-
- set PATH=c:\mingw32\bin;%PATH%
-
- then run 'mingw32-make mingw32' in the root dir. There are other
- make targets available to build libcurl with more features, use:
- 'mingw32-make mingw32-zlib' to build with Zlib support;
- 'mingw32-make mingw32-ssl-zlib' to build with SSL and Zlib enabled;
- 'mingw32-make mingw32-ssh2-ssl-zlib' to build with SSH2, SSL, Zlib;
- 'mingw32-make mingw32-ssh2-ssl-sspi-zlib' to build with SSH2, SSL, Zlib
- and SSPI support.
-
- If you have any problems linking libraries or finding header files, be sure
- to verify that the provided "Makefile.m32" files use the proper paths, and
- adjust as necessary. It is also possible to override these paths with
- environment variables, for example:
-
- set ZLIB_PATH=c:\zlib-1.2.8
- set OPENSSL_PATH=c:\openssl-1.0.2c
- set LIBSSH2_PATH=c:\libssh2-1.6.0
-
- ATTENTION: if you want to build with libssh2 support you have to use latest
- version 0.17 - previous versions will NOT work with 7.17.0 and later!
- Use 'mingw32-make mingw32-ssh2-ssl-zlib' to build with SSH2 and SSL enabled.
-
- It is now also possible to build with other LDAP SDKs than MS LDAP;
- currently it is possible to build with native Win32 OpenLDAP, or with the
- Novell CLDAP SDK. If you want to use these you need to set these vars:
-
- set LDAP_SDK=c:\openldap
- set USE_LDAP_OPENLDAP=1
-
- or for using the Novell SDK:
-
- set USE_LDAP_NOVELL=1
-
- If you want to enable LDAPS support then set LDAPS=1.
-
- - optional MingW32-built OpenLDAP SDK available from:
- http://www.gknw.net/mirror/openldap/
- - optional recent Novell CLDAP SDK available from:
- https://www.novell.com/developer/ndk/ldap_libraries_for_c.html
-
- Cygwin
- ------
-
- Almost identical to the unix installation. Run the configure script in the
- curl root with 'sh configure'. Make sure you have the sh executable in
- /bin/ or you'll see the configure fail toward the end.
-
- Run 'make'
-
- Dev-Cpp
- -------
-
- See the separate INSTALL.devcpp file for details.
-
- MSVC 6 caveats
- --------------
-
- If you use MSVC 6 it is required that you use the February 2003 edition of
- the 'Platform SDK' which can be downloaded from:
-
- https://www.microsoft.com/en-us/download/details.aspx?id=12261
-
- Building any software with MSVC 6 without having PSDK installed is just
- asking for trouble down the road once you have released it, you might notice
- the problems in the first corner or ten miles ahead, depending mostly on your
- choice of static vs dynamic runtime and third party libraries. Anyone using
- software built in such way will at some point regret having done so.
-
- If the compiler has been updated with the installation of a service pack as
- those mentioned in https://support.microsoft.com/kb/194022 the compiler can be
- safely used to read source code, translate and make it object code.
-
- But, even with the service packs mentioned above installed, the resulting
- software generated in such an environment will be using outdated system
- header files and libraries with bugs and security issues which have already
- been addressed and fixed long time ago.
-
- So, building curl and libcurl with MSVC 6 without PSDK is absolutely
- discouraged for the benefit of anyone using software built in such
- environment. And it will not be supported in any way, as we could just
- be hunting bugs which have already been fixed way back in 2003.
-
- When building with MSVC 6 we attempt to detect if PSDK is not being used,
- and if this is the case the build process will fail hard with an error
- message stating that the February 2003 PSDK is required. This is done to
- protect the unsuspecting and avoid PEBKAC issues.
-
- Additionally it might happen that a die hard MSVC hacker still wants to
- build curl and libcurl with MSVC 6 without PSDK installed, even knowing
- that this is a highly discouraged and unsupported build environment. In
- this case the brave of heart will be able to build in such an environment
- with the requisite of defining preprocessor symbol ALLOW_MSVC6_WITHOUT_PSDK
- in lib/config-win32.h and knowing that LDAP and IPv6 support will be missing.
-
- MSVC from command line
- ----------------------
-
- Run the 'vcvars32.bat' file to get a proper environment. The
- vcvars32.bat file is part of the Microsoft development environment and
- you may find it in 'C:\Program Files\Microsoft Visual Studio\vc98\bin'
- provided that you installed Visual C/C++ 6 in the default directory.
-
- Then run 'nmake vc' in curl's root directory.
-
- If you want to compile with zlib support, you will need to build
- zlib (http://www.zlib.net/) as well. Please read the zlib
- documentation on how to compile zlib. Define the ZLIB_PATH environment
- variable to the location of zlib.h and zlib.lib, for example:
-
- set ZLIB_PATH=c:\zlib-1.2.8
-
- Then run 'nmake vc-zlib' in curl's root directory.
-
- If you want to compile with SSL support you need the OpenSSL package.
- Please read the OpenSSL documentation on how to compile and install
- the OpenSSL libraries. The build process of OpenSSL generates the
- libeay32.dll and ssleay32.dll files in the out32dll subdirectory in
- the OpenSSL home directory. OpenSSL static libraries (libeay32.lib,
- ssleay32.lib, RSAglue.lib) are created in the out32 subdirectory.
-
- Before running nmake define the OPENSSL_PATH environment variable with
- the root/base directory of OpenSSL, for example:
-
- set OPENSSL_PATH=c:\openssl-0.9.8zc
-
- Then run 'nmake vc-ssl' or 'nmake vc-ssl-dll' in curl's root
- directory. 'nmake vc-ssl' will create a libcurl static and dynamic
- libraries in the lib subdirectory, as well as a statically linked
- version of curl.exe in the src subdirectory. This statically linked
- version is a standalone executable not requiring any DLL at
- runtime. This make method requires that you have the static OpenSSL
- libraries available in OpenSSL's out32 subdirectory.
- 'nmake vc-ssl-dll' creates the libcurl dynamic library and
- links curl.exe against libcurl and OpenSSL dynamically.
- This executable requires libcurl.dll and the OpenSSL DLLs
- at runtime.
- Run 'nmake vc-ssl-zlib' to build with both ssl and zlib support.
-
- MSVC IDE
- --------
-
- A fairly comprehensive set of Visual Studio project files are available for
- v6.0 through v12.0 and are located in the projects folder to allow proper
- building of both the libcurl library as well as the curl tool.
-
- For more information about these projects and building via Visual Studio
- please see the README file located in the projects folder.
-
- Borland C++ compiler
- --------------------
-
- Ensure that your build environment is properly set up to use the compiler
- and associated tools. PATH environment variable must include the path to
- bin subdirectory of your compiler installation, eg: c:\Borland\BCC55\bin
-
- It is advisable to set environment variable BCCDIR to the base path of
- the compiler installation.
-
- set BCCDIR=c:\Borland\BCC55
-
- In order to build a plain vanilla version of curl and libcurl run the
- following command from curl's root directory:
-
- make borland
-
- To build curl and libcurl with zlib and OpenSSL support set environment
- variables ZLIB_PATH and OPENSSL_PATH to the base subdirectories of the
- already built zlib and OpenSSL libraries and from curl's root directory
- run command:
-
- make borland-ssl-zlib
-
- libcurl library will be built in 'lib' subdirectory while curl tool
- is built in 'src' subdirectory. In order to use libcurl library it is
- advisable to modify compiler's configuration file bcc32.cfg located
- in c:\Borland\BCC55\bin to reflect the location of libraries include
- paths for example the '-I' line could result in something like:
-
- -I"c:\Borland\BCC55\include;c:\curl\include;c:\openssl\inc32"
-
- bcc3.cfg '-L' line could also be modified to reflect the location of
- of libcurl library resulting for example:
-
- -L"c:\Borland\BCC55\lib;c:\curl\lib;c:\openssl\out32"
-
- In order to build sample program 'simple.c' from the docs\examples
- subdirectory run following command from mentioned subdirectory:
-
- bcc32 simple.c libcurl.lib cw32mt.lib
-
- In order to build sample program simplessl.c an SSL enabled libcurl
- is required, as well as the OpenSSL libeay32.lib and ssleay32.lib
- libraries.
-
- OTHER MSVC IDEs
- ---------------
-
- If you use VC++, Borland or similar compilers. Include all lib source
- files in a static lib "project" (all .c and .h files that is).
- (you should name it libcurl or similar)
-
- Make the sources in the src/ drawer be a "win32 console application"
- project. Name it curl.
-
- Disabling Specific Protocols in Win32 builds
- --------------------------------------------
-
- The configure utility, unfortunately, is not available for the Windows
- environment, therefore, you cannot use the various disable-protocol
- options of the configure utility on this platform.
-
- However, you can use the following defines to disable specific
- protocols:
-
- HTTP_ONLY disables all protocols except HTTP
- CURL_DISABLE_FTP disables FTP
- CURL_DISABLE_LDAP disables LDAP
- CURL_DISABLE_TELNET disables TELNET
- CURL_DISABLE_DICT disables DICT
- CURL_DISABLE_FILE disables FILE
- CURL_DISABLE_TFTP disables TFTP
- CURL_DISABLE_HTTP disables HTTP
- CURL_DISABLE_IMAP disables IMAP
- CURL_DISABLE_POP3 disables POP3
- CURL_DISABLE_SMTP disables SMTP
-
- If you want to set any of these defines you have the following options:
-
- - Modify lib/config-win32.h
- - Modify lib/curl_setup.h
- - Modify lib/Makefile.vc6
- - Modify the "Preprocessor Definitions" in the libcurl project
-
- Note: The pre-processor settings can be found using the Visual Studio IDE
- under "Project -> Settings -> C/C++ -> General" in VC6 and "Project ->
- Properties -> Configuration Properties -> C/C++ -> Preprocessor" in later
- versions.
-
- Using BSD-style lwIP instead of Winsock TCP/IP stack in Win32 builds
- --------------------------------------------------------------------
-
- In order to compile libcurl and curl using BSD-style lwIP TCP/IP stack
- it is necessary to make definition of preprocessor symbol USE_LWIPSOCK
- visible to libcurl and curl compilation processes. To set this definition
- you have the following alternatives:
-
- - Modify lib/config-win32.h and src/config-win32.h
- - Modify lib/Makefile.vc6
- - Modify the "Preprocessor Definitions" in the libcurl project
-
- Note: The pre-processor settings can be found using the Visual Studio IDE
- under "Project -> Settings -> C/C++ -> General" in VC6 and "Project ->
- Properties -> Configuration Properties -> C/C++ -> Preprocessor" in later
- versions.
-
- Once that libcurl has been built with BSD-style lwIP TCP/IP stack support,
- in order to use it with your program it is mandatory that your program
- includes lwIP header file <lwip/opt.h> (or another lwIP header that includes
- this) before including any libcurl header. Your program does not need the
- USE_LWIPSOCK preprocessor definition which is for libcurl internals only.
-
- Compilation has been verified with lwIP 1.4.0 and contrib-1.4.0 from:
-
- http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.zip
- http://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip
-
- This BSD-style lwIP TCP/IP stack support must be considered experimental
- given that it has been verified that lwIP 1.4.0 still needs some polish,
- and libcurl might yet need some additional adjustment, caveat emptor.
-
- Important static libcurl usage note
- -----------------------------------
-
- When building an application that uses the static libcurl library, you must
- add '-DCURL_STATICLIB' to your CFLAGS. Otherwise the linker will look for
- dynamic import symbols.
-
- Legacy Windows and SSL
- ----------------------
-
- WinSSL (specifically SChannel from Windows SSPI), is the native SSL library
- in Windows. However, WinSSL in Windows <= XP is unable to connect to servers
- that no longer support the legacy handshakes and algorithms used by those
- versions. If you will be using curl in one of those earlier versions of
- Windows you should choose another SSL backend such as OpenSSL.
-
-Apple iOS and Mac OS X
-======================
-
- On recent Apple operating systems, curl can be built to use Apple's
- SSL/TLS implementation, Secure Transport, instead of OpenSSL. To build with
- Secure Transport for SSL/TLS, use the configure option --with-darwinssl. (It
- is not necessary to use the option --without-ssl.) This feature requires iOS
- 5.0 or later, or OS X 10.5 ("Leopard") or later.
-
- When Secure Transport is in use, the curl options --cacert and --capath and
- their libcurl equivalents, will be ignored, because Secure Transport uses
- the certificates stored in the Keychain to evaluate whether or not to trust
- the server. This, of course, includes the root certificates that ship with
- the OS. The --cert and --engine options, and their libcurl equivalents, are
- currently unimplemented in curl with Secure Transport.
-
- For OS X users: In OS X 10.8 ("Mountain Lion"), Apple made a major
- overhaul to the Secure Transport API that, among other things, added
- support for the newer TLS 1.1 and 1.2 protocols. To get curl to support
- TLS 1.1 and 1.2, you must build curl on Mountain Lion or later, or by
- using the equivalent SDK. If you set the MACOSX_DEPLOYMENT_TARGET
- environmental variable to an earlier version of OS X prior to building curl,
- then curl will use the new Secure Transport API on Mountain Lion and later,
- and fall back on the older API when the same curl binary is executed on
- older cats. For example, running these commands in curl's directory in the
- shell will build the code such that it will run on cats as old as OS X 10.6
- ("Snow Leopard") (using bash):
-
- export MACOSX_DEPLOYMENT_TARGET="10.6"
- ./configure --with-darwinssl
- make
-
-IBM OS/2
-========
-
- Building under OS/2 is not much different from building under unix.
- You need:
-
- - emx 0.9d
- - GNU make
- - GNU patch
- - ksh
- - GNU bison
- - GNU file utilities
- - GNU sed
- - autoconf 2.13
-
- If you want to build with OpenSSL or OpenLDAP support, you'll need to
- download those libraries, too. Dirk Ohme has done some work to port SSL
- libraries under OS/2, but it looks like he doesn't care about emx. You'll
- find his patches on: http://come.to/Dirk_Ohme
-
- If during the linking you get an error about _errno being an undefined
- symbol referenced from the text segment, you need to add -D__ST_MT_ERRNO__
- in your definitions.
-
- If everything seems to work fine but there's no curl.exe, you need to add
- -Zexe to your linker flags.
-
- If you're getting huge binaries, probably your makefiles have the -g in
- CFLAGS.
-
-VMS
-===
-
- (The VMS section is in whole contributed by the friendly Nico Baggus)
-
- Curl seems to work with FTP & HTTP other protocols are not tested. (the
- perl http/ftp testing server supplied as testing too cannot work on VMS
- because vms has no concept of fork(). [ I tried to give it a whack, but
- that's of no use.
-
- SSL stuff has not been ported.
-
- Telnet has about the same issues as for Win32. When the changes for Win32
- are clear maybe they'll work for VMS too. The basic problem is that select
- ONLY works for sockets.
-
- Marked instances of fopen/[f]stat that might become a problem, especially
- for non stream files. In this regard, the files opened for writing will be
- created stream/lf and will thus be safe. Just keep in mind that non-binary
- read/wring from/to files will have a records size limit of 32767 bytes
- imposed.
-
- Stat to get the size of the files is again only safe for stream files &
- fixed record files without implied CC.
-
- -- My guess is that only allowing access to stream files is the quickest
- way to get around the most issues. Therefore all files need to to be
- checked to be sure they will be stream/lf before processing them. This is
- the easiest way out, I know. The reason for this is that code that needs to
- report the filesize will become a pain in the ass otherwise.
-
- Exit status.... Well we needed something done here,
-
- VMS has a structured exist status:
- | 3 | 2 | 1 | 0|
- |1098|765432109876|5432109876543|210|
- +----+------------+-------------+---+
- |Ctrl| Facility | Error code |sev|
- +----+------------+-------------+---+
-
- With the Ctrl-bits an application can tell if part or the whole message has
- already been printed from the program, DCL doesn't need to print it again.
-
- Facility - basically the program ID. A code assigned to the program
- the name can be fetched from external or internal message libraries
- Error code - the err codes assigned by the application
- Sev. - severity: Even = error, off = non error
-
- 0 = Warning
- 1 = Success
- 2 = Error
- 3 = Information
- 4 = Fatal
- <5-7> reserved.
-
- This all presents itself with:
- %<FACILITY>-<Sev>-<Errorname>, <Error message>
-
- See also the src/curlmsg.msg file, it has the source for the messages In
- src/main.c a section is devoted to message status values, the globalvalues
- create symbols with certain values, referenced from a compiled message
- file. Have all exit function use a exit status derived from a translation
- table with the compiled message codes.
-
- This was all compiled with:
-
- Compaq C V6.2-003 on OpenVMS Alpha V7.1-1H2
-
- So far for porting notes as of:
-
- 13-jul-2001
- N. Baggus
-
-QNX
-===
-
- (This section was graciously brought to us by David Bentham)
-
- As QNX is targeted for resource constrained environments, the QNX headers
- set conservative limits. This includes the FD_SETSIZE macro, set by default
- to 32. Socket descriptors returned within the CURL library may exceed this,
- resulting in memory faults/SIGSEGV crashes when passed into select(..)
- calls using fd_set macros.
-
- A good all-round solution to this is to override the default when building
- libcurl, by overriding CFLAGS during configure, example
-
- # configure CFLAGS='-DFD_SETSIZE=64 -g -O2'
-
-RISC OS
-=======
-
- The library can be cross-compiled using gccsdk as follows:
-
- CC=riscos-gcc AR=riscos-ar RANLIB='riscos-ar -s' ./configure \
- --host=arm-riscos-aof --without-random --disable-shared
- make
-
- where riscos-gcc and riscos-ar are links to the gccsdk tools.
- You can then link your program with curl/lib/.libs/libcurl.a
-
-AmigaOS
-=======
-
- (This section was graciously brought to us by Diego Casorran)
-
- To build curl/libcurl on AmigaOS just type 'make amiga' ...
-
- What you need is: (not tested with others versions)
-
- GeekGadgets / gcc 2.95.3 (http://www.geekgadgets.org/)
-
- AmiTCP SDK v4.3 (http://www.aminet.net/comm/tcp/AmiTCP-SDK-4.3.lha)
-
- Native Developer Kit (http://www.amiga.com/3.9/download/NDK3.9.lha)
-
- As no ixemul.library is required you will be able to build it for
- WarpOS/PowerPC (not tested by me), as well a MorphOS version should be
- possible with no problems.
-
- To enable SSL support, you need a OpenSSL native version (without ixemul),
- you can find a precompiled package at http://amiga.sourceforge.net/OpenSSL/
-
-NetWare
-=======
-
- To compile curl.nlm / libcurl.nlm you need:
-
- - either any gcc / nlmconv, or CodeWarrior 7 PDK 4 or later.
- - gnu make and awk running on the platform you compile on;
- native Win32 versions can be downloaded from:
- http://www.gknw.net/development/prgtools/
- - recent Novell LibC or Novell CLib SDK available from:
- https://www.novell.com/developer/ndk/
- - optional recent Novell CLDAP SDK available from:
- https://www.novell.com/developer/ndk/ldap_libraries_for_c.html
- - optional zlib sources (static or dynamic linking with zlib.imp);
- sources with NetWare Makefile can be obtained from:
- http://www.gknw.net/mirror/zlib/
- - optional OpenSSL sources (version 0.9.8 or later build with BSD sockets);
- you can find precompiled packages at:
- http://www.gknw.net/development/ossl/netware/
- for CLIB-based builds OpenSSL 0.9.8h or later is required - earlier versions
- don't support building with CLIB BSD sockets.
- - optional SSH2 sources (version 0.17 or later);
-
- Set a search path to your compiler, linker and tools; on Linux make
- sure that the var OSTYPE contains the string 'linux'; set the var
- NDKBASE to point to the base of your Novell NDK; and then type
- 'make netware' from the top source directory; other targets available
- are 'netware-ssl', 'netware-ssl-zlib', 'netware-zlib' and 'netware-ares';
- if you need other combinations you can control the build with the
- environment variables WITH_SSL, WITH_ZLIB, WITH_ARES, WITH_SSH2, and
- ENABLE_IPV6; you can set LINK_STATIC=1 to link curl.nlm statically.
- By default LDAP support is enabled, however currently you will need a patch
- in order to use the CLDAP NDK with BSD sockets (Novell Bug 300237):
- http://www.gknw.net/test/curl/cldap_ndk/ldap_ndk.diff
- I found on some Linux systems (RH9) that OS detection didn't work although
- a 'set | grep OSTYPE' shows the var present and set; I simply overwrote it
- with 'OSTYPE=linux-rh9-gnu' and the detection in the Makefile worked...
- Any help in testing appreciated!
- Builds automatically created 8 times a day from current git are here:
- http://www.gknw.net/mirror/curl/autobuilds/
- the status of these builds can be viewed at the autobuild table:
- https://curl.haxx.se/dev/builds.html
-
-eCos
-====
-
- curl does not use the eCos build system, so you must first build eCos
- separately, then link curl to the resulting eCos library. Here's a sample
- configure line to do so on an x86 Linux box targeting x86:
-
- GCCLIB=`gcc -print-libgcc-file-name` && \
- CFLAGS="-D__ECOS=1 -nostdinc -I$ECOS_INSTALL/include \
- -I`dirname $GCCLIB`/include" \
- LDFLAGS="-nostdlib -Wl,--gc-sections -Wl,-static \
- -L$ECOS_INSTALL/lib -Ttarget.ld -ltarget" \
- ./configure --host=i386 --disable-shared \
- --without-ssl --without-zlib --disable-manual --disable-ldap
-
- In most cases, eCos users will be using libcurl from within a custom
- embedded application. Using the standard 'curl' executable from
- within eCos means facing the limitation of the standard eCos C
- startup code which does not allow passing arguments in main(). To
- run 'curl' from eCos and have it do something useful, you will need
- to either modify the eCos startup code to pass in some arguments, or
- modify the curl application itself to retrieve its arguments from
- some location set by the bootloader or hard-code them.
-
- Something like the following patch could be used to hard-code some
- arguments. The MTAB_ENTRY line mounts a RAM disk as the root filesystem
- (without mounting some kind of filesystem, eCos errors out all file
- operations which curl does not take to well). The next section synthesizes
- some command-line arguments for curl to use, in this case to direct curl
- to read further arguments from a file. It then creates that file on the
- RAM disk and places within it a URL to download: a file: URL that
- just happens to point to the configuration file itself. The results
- of running curl in this way is the contents of the configuration file
- printed to the console.
-
---- src/main.c 19 Jul 2006 19:09:56 -0000 1.363
-+++ src/main.c 24 Jul 2006 21:37:23 -0000
-@@ -4286,11 +4286,31 @@
- }
-
-
-+#ifdef __ECOS
-+#include <cyg/fileio/fileio.h>
-+MTAB_ENTRY( testfs_mte1,
-+ "/",
-+ "ramfs",
-+ "",
-+ 0);
-+#endif
-
- int main(int argc, char *argv[])
- {
- int res;
- struct Configurable config;
-+#ifdef __ECOS
-+ char *args[] = {"ecos-curl", "-K", "curlconf.txt"};
-+ FILE *f;
-+ argc = sizeof(args)/sizeof(args[0]);
-+ argv = args;
-+
-+ f = fopen("curlconf.txt", "w");
-+ if (f) {
-+ fprintf(f, "--url file:curlconf.txt");
-+ fclose(f);
-+ }
-+#endif
- memset(&config, 0, sizeof(struct Configurable));
-
- config.errors = stderr; /* default errors to stderr */
-
-Minix
-=====
-
- curl can be compiled on Minix 3 using gcc or ACK (starting with
- ver. 3.1.3). Ensure that GNU gawk and bash are both installed and
- available in the PATH.
-
- ACK
- ---
- Increase the heap sizes of the compiler with the command:
-
- binsizes xxl
-
- then configure and compile curl with:
-
- ./configure CC=cc LD=cc AR=/usr/bin/aal GREP=grep \
- CPPFLAGS='-D_POSIX_SOURCE=1 -I/usr/local/include'
- make
- chmem =256000 src/curl
-
- GCC
- ---
- Make sure gcc is in your PATH with the command:
-
- export PATH=/usr/gnu/bin:$PATH
-
- then configure and compile curl with:
-
- ./configure CC=gcc AR=/usr/gnu/bin/gar GREP=grep
- make
- chmem =256000 src/curl
-
-Symbian OS
-==========
-
- The Symbian OS port uses the Symbian build system to compile. From the
- packages/Symbian/group/ directory, run:
-
- bldmake bldfiles
- abld build
-
- to compile and install curl and libcurl using SBSv1. If your Symbian
- SDK doesn't include support for P.I.P.S., you will need to contact
- your SDK vendor to obtain that first.
-
-VxWorks
-========
-
- Build for VxWorks is performed using cross compilation.
- That means you build on Windows machine using VxWorks tools and
- run the built image on the VxWorks device.
-
- To build libcurl for VxWorks you need:
-
- - CYGWIN (free, https://cygwin.com/)
- - Wind River Workbench (commercial)
-
- If you have CYGWIN and Workbench installed on you machine
- follow after next steps:
-
- 1. Open the Command Prompt window and change directory ('cd')
- to the libcurl 'lib' folder.
- 2. Add CYGWIN 'bin' folder to the PATH environment variable.
- For example, type 'set PATH=C:/embedded/cygwin/bin;%PATH%'.
- 3. Adjust environment variables defined in 'Environment' section
- of the Makefile.vxworks file to point to your software folders.
- 4. Build the libcurl by typing 'make -f ./Makefile.vxworks'
-
- As a result the libcurl.a library should be created in the 'lib' folder.
- To clean the build results type 'make -f ./Makefile.vxworks clean'.
-
-Android
-=======
-
- Method using the static makefile:
-
- - see the build notes in the packages/Android/Android.mk file.
-
- Method using a configure cross-compile (tested with Android NDK r7c, r8):
-
- - prepare the toolchain of the Android NDK for standalone use; this can
- be done by invoking the script:
- ./build/tools/make-standalone-toolchain.sh
- which creates a usual cross-compile toolchain. Lets assume that you put
- this toolchain below /opt then invoke configure with something like:
- export PATH=/opt/arm-linux-androideabi-4.4.3/bin:$PATH
- ./configure --host=arm-linux-androideabi [more configure options]
- make
- - if you want to compile directly from our GIT repo you might run into
- this issue with older automake stuff:
- checking host system type...
- Invalid configuration `arm-linux-androideabi':
- system `androideabi' not recognized
- configure: error: /bin/sh ./config.sub arm-linux-androideabi failed
- this issue can be fixed with using more recent versions of config.sub
- and config.guess which can be obtained here:
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=tree
- you need to replace your system-own versions which usually can be
- found in your automake folder:
- find /usr -name config.sub
-
- Wrapper for pkg-config:
-
- - In order to make proper use of pkg-config so that configure is able to
- find all dependencies you should create a wrapper script for pkg-config;
- file /opt/arm-linux-androideabi-4.4.3/bin/arm-linux-androideabi-pkg-config:
-
- #!/bin/sh
- SYSROOT=$(dirname ${0%/*})/sysroot
- export PKG_CONFIG_DIR=
- export PKG_CONFIG_LIBDIR=${SYSROOT}/usr/local/lib/pkgconfig:${SYSROOT}/usr/share/pkgconfig
- export PKG_CONFIG_SYSROOT_DIR=${SYSROOT}
- exec pkg-config "$@"
-
- also create a copy or symlink with name arm-unknown-linux-androideabi-pkg-config.
-
-CROSS COMPILE
-=============
-
- (This section was graciously brought to us by Jim Duey, with additions by
- Dan Fandrich)
-
- Download and unpack the curl package.
-
- 'cd' to the new directory. (e.g. cd curl-7.12.3)
-
- Set environment variables to point to the cross-compile toolchain and call
- configure with any options you need. Be sure and specify the '--host' and
- '--build' parameters at configuration time. The following script is an
- example of cross-compiling for the IBM 405GP PowerPC processor using the
- toolchain from MonteVista for Hardhat Linux.
-
- (begin script)
-
- #! /bin/sh
-
- export PATH=$PATH:/opt/hardhat/devkit/ppc/405/bin
- export CPPFLAGS="-I/opt/hardhat/devkit/ppc/405/target/usr/include"
- export AR=ppc_405-ar
- export AS=ppc_405-as
- export LD=ppc_405-ld
- export RANLIB=ppc_405-ranlib
- export CC=ppc_405-gcc
- export NM=ppc_405-nm
-
- ./configure --target=powerpc-hardhat-linux \
- --host=powerpc-hardhat-linux \
- --build=i586-pc-linux-gnu \
- --prefix=/opt/hardhat/devkit/ppc/405/target/usr/local \
- --exec-prefix=/usr/local
-
- (end script)
-
- You may also need to provide a parameter like '--with-random=/dev/urandom'
- to configure as it cannot detect the presence of a random number
- generating device for a target system. The '--prefix' parameter
- specifies where curl will be installed. If 'configure' completes
- successfully, do 'make' and 'make install' as usual.
-
- In some cases, you may be able to simplify the above commands to as
- little as:
-
- ./configure --host=ARCH-OS
-
-REDUCING SIZE
-=============
-
- There are a number of configure options that can be used to reduce the
- size of libcurl for embedded applications where binary size is an
- important factor. First, be sure to set the CFLAGS variable when
- configuring with any relevant compiler optimization flags to reduce the
- size of the binary. For gcc, this would mean at minimum the -Os option,
- and potentially the -march=X, -mdynamic-no-pic and -flto options as well,
- e.g.
-
- ./configure CFLAGS='-Os' LDFLAGS='-Wl,-Bsymbolic'...
-
- Note that newer compilers often produce smaller code than older versions
- due to improved optimization.
-
- Be sure to specify as many --disable- and --without- flags on the configure
- command-line as you can to disable all the libcurl features that you
- know your application is not going to need. Besides specifying the
- --disable-PROTOCOL flags for all the types of URLs your application
- will not use, here are some other flags that can reduce the size of the
- library:
-
- --disable-ares (disables support for the C-ARES DNS library)
- --disable-cookies (disables support for HTTP cookies)
- --disable-crypto-auth (disables HTTP cryptographic authentication)
- --disable-ipv6 (disables support for IPv6)
- --disable-manual (disables support for the built-in documentation)
- --disable-proxy (disables support for HTTP and SOCKS proxies)
- --disable-unix-sockets (disables support for UNIX sockets)
- --disable-verbose (eliminates debugging strings and error code strings)
- --disable-versioned-symbols (disables support for versioned symbols)
- --enable-hidden-symbols (eliminates unneeded symbols in the shared library)
- --without-libidn (disables support for the libidn DNS library)
- --without-librtmp (disables support for RTMP)
- --without-ssl (disables support for SSL/TLS)
- --without-zlib (disables support for on-the-fly decompression)
-
- The GNU compiler and linker have a number of options that can reduce the
- size of the libcurl dynamic libraries on some platforms even further.
- Specify them by providing appropriate CFLAGS and LDFLAGS variables on the
- configure command-line, e.g.
-
- CFLAGS="-Os -ffunction-sections -fdata-sections \
- -fno-unwind-tables -fno-asynchronous-unwind-tables -flto" \
- LDFLAGS="-Wl,-s -Wl,-Bsymbolic -Wl,--gc-sections"
-
- Be sure also to strip debugging symbols from your binaries after
- compiling using 'strip' (or the appropriate variant if cross-compiling).
- If space is really tight, you may be able to remove some unneeded
- sections of the shared library using the -R option to objcopy (e.g. the
- .comment section).
-
- Using these techniques it is possible to create a basic HTTP-only shared
- libcurl library for i386 Linux platforms that is only 109 KiB in size, and
- an FTP-only library that is 109 KiB in size (as of libcurl version 7.45.0,
- using gcc 4.9.2).
-
- You may find that statically linking libcurl to your application will
- result in a lower total size than dynamically linking.
-
- Note that the curl test harness can detect the use of some, but not all, of
- the --disable statements suggested above. Use will cause tests relying on
- those features to fail. The test harness can be manually forced to skip
- the relevant tests by specifying certain key words on the runtests.pl
- command line. Following is a list of appropriate key words:
-
- --disable-cookies !cookies
- --disable-manual !--manual
- --disable-proxy !HTTP\ proxy !proxytunnel !SOCKS4 !SOCKS5
-
-PORTS
-=====
-
- This is a probably incomplete list of known hardware and operating systems
- that curl has been compiled for. If you know a system curl compiles and
- runs on, that isn't listed, please let us know!
-
- - Alpha DEC OSF 4
- - Alpha Digital UNIX v3.2
- - Alpha FreeBSD 4.1, 4.5
- - Alpha Linux 2.2, 2.4
- - Alpha NetBSD 1.5.2
- - Alpha OpenBSD 3.0
- - Alpha OpenVMS V7.1-1H2
- - Alpha Tru64 v5.0 5.1
- - AVR32 Linux
- - ARM Android 1.5, 2.1, 2.3, 3.2, 4.x
- - ARM INTEGRITY
- - ARM iOS
- - Cell Linux
- - Cell Cell OS
- - HP-PA HP-UX 9.X 10.X 11.X
- - HP-PA Linux
- - HP3000 MPE/iX
- - MicroBlaze uClinux
- - MIPS IRIX 6.2, 6.5
- - MIPS Linux
- - OS/400
- - Pocket PC/Win CE 3.0
- - Power AIX 3.2.5, 4.2, 4.3.1, 4.3.2, 5.1, 5.2
- - PowerPC Darwin 1.0
- - PowerPC INTEGRITY
- - PowerPC Linux
- - PowerPC Mac OS 9
- - PowerPC Mac OS X
- - SH4 Linux 2.6.X
- - SH4 OS21
- - SINIX-Z v5
- - Sparc Linux
- - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8, 9, 10
- - Sparc SunOS 4.1.X
- - StrongARM (and other ARM) RISC OS 3.1, 4.02
- - StrongARM/ARM7/ARM9 Linux 2.4, 2.6
- - StrongARM NetBSD 1.4.1
- - Symbian OS (P.I.P.S.) 9.x
- - TPF
- - Ultrix 4.3a
- - UNICOS 9.0
- - i386 BeOS
- - i386 DOS
- - i386 eCos 1.3.1
- - i386 Esix 4.1
- - i386 FreeBSD
- - i386 HURD
- - i386 Haiku OS
- - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4, 2.6
- - i386 Mac OS X
- - i386 MINIX 3.1
- - i386 NetBSD
- - i386 Novell NetWare
- - i386 OS/2
- - i386 OpenBSD
- - i386 QNX 6
- - i386 SCO unix
- - i386 Solaris 2.7
- - i386 Windows 95, 98, ME, NT, 2000, XP, 2003
- - i486 ncr-sysv4.3.03 (NCR MP-RAS)
- - ia64 Linux 2.3.99
- - m68k AmigaOS 3
- - m68k Linux
- - m68k uClinux
- - m68k OpenBSD
- - m88k dg-dgux5.4R3.00
- - s390 Linux
- - x86_64 Linux
- - XScale/PXA250 Linux 2.4
- - Nios II uClinux
-
-Useful URLs
-===========
-
-axTLS http://axtls.sourceforge.net/
-c-ares http://c-ares.haxx.se/
-GNU GSS https://www.gnu.org/software/gss/
-GnuTLS https://www.gnu.org/software/gnutls/
-Heimdal http://www.h5l.org/
-libidn https://www.gnu.org/software/libidn/
-libmetalink https://launchpad.net/libmetalink/
-libssh2 https://www.libssh2.org/
-MIT Kerberos http://web.mit.edu/kerberos/www/dist/
-NSS https://developer.mozilla.org/en-US/docs/Mozilla/Projects/NSS
-OpenLDAP http://www.openldap.org/
-OpenSSL https://www.openssl.org/
-PolarSSL https://tls.mbed.org/
-wolfSSL https://www.wolfssl.com/wolfSSL/
-Zlib http://www.zlib.net/
-
-MingW http://www.mingw.org/
-MinGW-w64 http://mingw-w64.sourceforge.net/
-OpenWatcom http://www.openwatcom.org/
+see INSTALL.md
diff --git a/docs/INSTALL.devcpp b/docs/INSTALL.devcpp
deleted file mode 100644
index f989d5295..000000000
--- a/docs/INSTALL.devcpp
+++ /dev/null
@@ -1,302 +0,0 @@
-DevCpp-Mingw Install & Compilation Sept 2005
-==================================
-
-Reference Emails available at curl@haxx.se:
-
- Libcurl Install and Use Issues
- Awaiting an Answer for Win 32 Install
- res = curl_easy_perform(curl); Error
- Makefile Issues
-
-
-Having previously done a thorough review of what was available that met my
-requirements under GPL, I settled for Libcurl as the software of choice for
-many reasons not the least of which was the support.
-
-Background
-----------
-
-This quest started when I innocently tried to incorporate the libcurl library
-into my simple source code. I figured that a few easy steps would accomplish
-this without major headaches. I had no idea that I would be facing an almost
-insurmountable challenge.
-
-The main problem lies in two areas. First the bulk of support for libcurl
-exists for a Unix/linux command line environments. This is of little help when
-it comes to Windows O/S.
-
-Secondly the help that does exist for the Windows O/S focused around mingw
-through a command line argument environment.
-
-You may ask "Why is this a problem?"
-
-I'm using a Windows O/S with DevCpp. For those of you who are unfamiliar with
-DevCpp, it is a window shell GUI that replaces the command line environment
-for gcc. A definite improvement that I am unwilling to give up. However using
-DevCpp presented its own set of issues. Inadvertently I also made some
-careless errors such as compiling the 7.14 version of Makefile with an older
-version of source code. Thanks to Dan Fandrich for picking this up.
-
-I did eventually with the help of Daniel, Phillipe and others manage to
-implement successfully (the only mingw available version)
-curl-7.13.0-win32-ssl-devel-mingw32 into the DevCpp environment. Only the
-dynamic libcurl.dll libcurldll.a libraries worked. The static library which I
-was interested in did not. Furthermore when I tried to implement one of the
-examples included with the curl package (get info.c) it caused the executable
-to crash. Tracing the bug I found it in the code and function res =
-curl_easy_perform(curl);.
-
-At this point I had to make a choice as to whether invest my limited
-time-energy resource to fixing the bug or to compile the new version
-available. After searching the archives I found a very similar or the same bug
-reported from version 7.12x on. Daniel did inform me that he thought that this
-bug had been fixed with the latest version. So I proceeded to compile the
-latest SSL version where I faced other challenges.
-
-In order to make this process unremarkable for others using the same
-environment I decided to document the process so that others will find it
-routine. It would be a shame if newbies could not implement this excellent
-package for their use.
-
-I would like to thank the many others in this forum and in the DevCpp forum
-for their help. Without your help I may either have given up or it would have
-taken me many times longer to achieve success.
-
-The Cookbook Approach
----------------------
-
-This discussion will be confined to a SSL static library compilation and
-installation. Limited mention and comments will be inserted where appropriate
-to help with non-SSL, dynamic libraries and executables.
-
-
- Using Makefile from DevCpp to compile Libcurl libraries
-
-Preamble
---------
-
-Using the latest version release - curl-7.14.0.tar.gz. Curl source code is
-platform independent. This simply means that the source code can be compiled
-for any Operating System (Linux/Unix Windows etc. and variations of thereof).
-
-The first thing to note is that inside curl-7.14.0 you will find two folders
-lib and src. Both contain Makefile.m32 (required for win mingw library or exe
-compilation) files which are different. The main difference between these two
-folders and the makefiles is that the src folder contents are used to compile
-an executable file(curl.exe) while the lib folder contents are used to compile
-a static (libcurl.a) and dynamic (libcurl.dll & libcurldll.a) file that can be
-used to compile libcurl with your own source code so that one can use and
-access all libcurl functions.
-
-Before we start please make sure that DevCpp is installed properly. In
-particular make sure you have no spaces in the name of any of the directories
-and subdirectories where DevCpp is installed. Failure to comply with the
-install instructions may produce erratic behaviour in DevCpp. For further info
-check the following sites
-
-http://aditsu.freeunixhost.com/dev-cpp-faq.html
-https://sourceforge.net/p/dev-cpp/discussion/48211/thread/2a85ea46
-
-As I have mentioned before I will confine this to the SSL Library compilations
-but the process is very similar for compilation of the executable - curl.exe;
-just substitute the src folder makefile in its stead.
-
-First use a text processor Notepad, or your own favourite text processor. To
-engage your favourite text processor, select Makefile.m32 click once with your
-mouse on file icon; icon turns blue, press the shift key and right-click on
-mouse, menu appears select "Open with", select your favourite text processor.
-
-Next read the contents of Makefile.m32. It includes instructions on its use.
-
-Method I - DOS Command Line
----------------------------
-
-Note - The only reason I have included this method is that Method II which is
-the preferred method for compiling does not allow for the setting of option
-switches (e.g. SSL = 1 or SSL =0). At least that's what they tell me at the
-Dev-Cpp forum.
-
-1 - Make a copy of (D:\Dev-Cpp\bin) bin folder and name it "bin Original"
-place it in the Dev-Cpp installed directory (D:\Dev-Cpp\ for this example)
-
-2 - Copy the entire contents of the LIB folder of curl-7.14.0.tar.gz or zip
-version into the bin folder above (D:\Dev-Cpp\bin). The reason being is that
-the make.exe file resides in this folder. Make.exe will use - Makefile.m32,
-Makefile.inc, and the source code included in the lib folder to compile the
-source code. There is a PATH issue with make.exe that remains unresolved at
-least for me. Unless the entire source code to be compiled is placed entirely
-within the directory of make.exe an error message will be generated - "file
-xxxx.yyy not available".
-
-3- Go to Dev-Cpp\bin and double click on make .exe. You will see a DOS window
-quickly pop up and close very quickly. Not to worry! Please do not skip this
-step.
-
-4- Click on the start button\Programs\MS-DOS Prompt.Once the DOS Window is up
-Type the disk drive letter (e.g. E: ) engage the enter button. The path should
-automatically take you to the directory of the make.exe file.
-
-5- To compile the source code simply type at the DOS prompt make -f
-Makefile.m32 as per instructions contained in the Makefile.m32 file (use any
-text processor to read instructions). I don't believe that this makefile
-allows for the option of non SSL. Ignore any warnings.
-
-6- Collect and make copies of libcurl.a, libcurl.dll, libcurldll.a and any *.o
-compilations you might need in another directory outside of the bin directory
-as you will need this files shortly to set up libcurl for use with
-Dev-cpp. For most apps *.o is not required. Later on we will show what to do
-with these files.
-
-7- You are finished but before closing we need to do cleanup - erase the bin
-folder and rename the "bin Original" folder created in step 1 to bin.
-
-Note to compile a curl executable the process is probably similar but instead
-of using the LIB folder contents use the SRC folder contents and Makefiles in
-curl-7.14.0.tar.gz. File directories relative placements must be respected for
-compiling to take place successfully. This may not be possible with the PATH
-problem that make.exe experiences. If anyone has solved this PATH issue and
-please make sure it actually works on Win 9x/2000/XP before letting me
-know. Then please let me or Daniel in on the solution so that it can be
-included with these instructions. Thanks.
-
-or
-
-Method II - Dev-Cpp GUI
------------------------
-
-1- Copy the entire contents of the LIB folder of curl-7.14.0.tar.gz or zip
-version into any folder outside of (Dev-Cpp\bin).
-
-2- Drop the File/New/click on Project.
-
-3- New Project Dialogue box appears. Double click on the Static Library.
-
-4- Create Project Dialogue box appears. Select the LIB folder location to
-place and locate your Project File Name. Placing the Project File Name
-elsewhere may cause problems (PATH issue problem again).
-
-5- Drop down the Project/Project Options. Project Options Dialogue box
-appears.
-
-6- Select the Makefile tab in the Project Options Dialogue Box. Check Box -
-Use Custom Makefile. Click on the Folder icon at the extreme right of the
-Check Box. Select Makefile.m32 in the folder wherever you have placed the
-contents of the LIB Folder. Press OK and close the Dialogue Box.
-
-7- Drop the Menu Project/Click on Add to Project. Open File Dialogue Box
-appears. The Dialogue Box should open in the folder wherever you have placed
-the contents of the LIB Folder. If not go there.
-
-8- Select Crtl-A to select all files in the LIB folder. Click on open to add
-files and close box. Wait till all files are added. This may take 30 seconds
-or longer.
-
-9- Drop the Menu Execute/Click on Compile.
-
-10- That's it.
-
-
- The following steps must be completed if Curl is to work properly
- =================================================================
-
-LIB folder inclusions (*.a placement)
--------------------------------------
-
-1- Refer to Method I - DOS Command Line point # 6 Take libcurl.a, libcurldll.a
-and install it in the directory C( or whichever drive Dev is installed)
-:\Dev-Cpp\lib.
-
-
-Include Folder
---------------
-
-1- Create a new folder by the name of curl (do not change the name curl to
-some other name as it will cause major issues) in the directory
-C:\Dev-Cpp\include.
-
-2- Copy the entire contents of the curl folder of curl-7.14.0.tar.gz or zip
- version into the newly created curl directory - C:\Dev-Cpp\include\curl.
-
-Links To Include And Lib Folder
--------------------------------
-
-1- Drop the Menu - Tools\Compiler Options\Directories\Libraries. Make sure
-that C( or whichever drive Dev is installed):\DEV-CPP\lib is included.
-
-2- Next select the Menu - Tools\Compiler Options\Directories\C Includes. Make
-sure that C:\DEV-CPP\include and C:\Dev-Cpp\include\curl are included.
-
-3- Next select the Menu - Tools\Compiler Options\Directories\C++
-Includes. Make sure that C:\DEV-CPP\include and C:\Dev-Cpp\include\curl are
-included.
-
-Linker Links
-------------
-
-1- Drop the Menu - Tools\Compiler Options\Directories\Compiler.
-
-2- Make sure that the box "Add these commands to the linker command line" is
-checked.
-
-3- Include in the white space immediately below the box referred in 2 -lcurl
--lws2_32.
-
-SSL Files
----------
-
-1- Get the latest openSSL (as of time of this writing)
-openssl-0.9.7e-win32-bin.zip for the minimalist package of the openssl-0.9.7e
-binaries ported to MS Windows 95/98/NT/XP using the MingW32/GCC-3.1
-development environment. The file may be downloaded at
-https://curl.haxx.se/download/.
-
-2- Open the above zip file. You will find two files - SDL.dll,
-SDL_mixer.dll. Install them in the directory C:\WINDOWS\SYSTEM32 for Win 9x
-users and c:\winnt\system32 for NT-family users.
-
-Multithreading Files
---------------------
-
-To be completed
-
-#define
--------
-
-1- Make sure that your program includes the following - #define CURL_STATICLIB
-must be declared FIRST before any other define functions may be
-added. Otherwise you may experience link errors.
-
-2- Don't forget to include #include "curl/curl.h".
-
-e.g.
- #define CURL_STATICLIB
-#include <windows.h>
- #include "curl/curl.h"
-#include <fstream>
-#include <iostream>
-#include <vector>
-etc...
-
-
-Static or Dynamic Library
--------------------------
-
-The above steps apply for the use by a static library. Should you choose to
-use a dynamic library you will be required to perform these additional steps.
-
-1- Refer to Method I - DOS Command Line point # 6. Install libcurl.dll in the
-directory C:\WINDOWS\SYSTEM32 for Win 9x users and c:\winnt\system32 for
-NT-family users.
-
-2- Refer to Linker Links point 3 - Replace -lcurl with -lcurldll.
-
-Voila you're done.
-
-The non-SSL static Library build may not be possible to use at least as of the
-time of this writing - v7.14. Check reference emails - Phillipe and I found it
-impossible to fully compile as certain files were missing for linking. No big
-loss as SSL is a major plus.
-
-Hope this Helps
-
-Tom
diff --git a/docs/INSTALL.md b/docs/INSTALL.md
new file mode 100644
index 000000000..a737993ed
--- /dev/null
+++ b/docs/INSTALL.md
@@ -0,0 +1,513 @@
+# how to install curl and libcurl
+
+## Installing Binary Packages
+
+Lots of people download binary distributions of curl and libcurl. This
+document does not describe how to install curl or libcurl using such a binary
+package. This document describes how to compile, build and install curl and
+libcurl from source code.
+
+## Building from git
+
+If you get your code off a git repository instead of a release tarball, see
+the `GIT-INFO` file in the root directory for specific instructions on how to
+proceed.
+
+# Unix
+
+A normal Unix installation is made in three or four steps (after you've
+unpacked the source archive):
+
+ ./configure
+ make
+ make test (optional)
+ make install
+
+You probably need to be root when doing the last command.
+
+Get a full listing of all available configure options by invoking it like:
+
+ ./configure --help
+
+If you want to install curl in a different file hierarchy than `/usr/local`,
+specify that when running configure:
+
+ ./configure --prefix=/path/to/curl/tree
+
+If you have write permission in that directory, you can do 'make install'
+without being root. An example of this would be to make a local install in
+your own home directory:
+
+ ./configure --prefix=$HOME
+ make
+ make install
+
+The configure script always tries to find a working SSL library unless
+explicitly told not to. If you have OpenSSL installed in the default search
+path for your compiler/linker, you don't need to do anything special. If you
+have OpenSSL installed in /usr/local/ssl, you can run configure like:
+
+ ./configure --with-ssl
+
+If you have OpenSSL installed somewhere else (for example, /opt/OpenSSL) and
+you have pkg-config installed, set the pkg-config path first, like this:
+
+ env PKG_CONFIG_PATH=/opt/OpenSSL/lib/pkgconfig ./configure --with-ssl
+
+Without pkg-config installed, use this:
+
+ ./configure --with-ssl=/opt/OpenSSL
+
+If you insist on forcing a build without SSL support, even though you may
+have OpenSSL installed in your system, you can run configure like this:
+
+ ./configure --without-ssl
+
+If you have OpenSSL installed, but with the libraries in one place and the
+header files somewhere else, you have to set the LDFLAGS and CPPFLAGS
+environment variables prior to running configure. Something like this should
+work:
+
+ CPPFLAGS="-I/path/to/ssl/include" LDFLAGS="-L/path/to/ssl/lib" ./configure
+
+If you have shared SSL libs installed in a directory where your run-time
+linker doesn't find them (which usually causes configure failures), you can
+provide the -R option to ld on some operating systems to set a hard-coded
+path to the run-time linker:
+
+ LDFLAGS=-R/usr/local/ssl/lib ./configure --with-ssl
+
+## More Options
+
+To force a static library compile, disable the shared library creation by
+running configure like:
+
+ ./configure --disable-shared
+
+To tell the configure script to skip searching for thread-safe functions, add
+an option like:
+
+ ./configure --disable-thread
+
+If you're a curl developer and use gcc, you might want to enable more debug
+options with the `--enable-debug` option.
+
+curl can be built to use a whole range of libraries to provide various useful
+services, and configure will try to auto-detect a decent default. But if you
+want to alter it, you can select how to deal with each individual library.
+
+## Select TLS backend
+
+The default OpenSSL configure check will also detect and use BoringSSL or
+libressl.
+
+ - GnuTLS: `--without-ssl --with-gnutls`.
+ - Cyassl: `--without-ssl --with-cyassl`
+ - NSS: `--without-ssl --with-nss`
+ - PolarSSL: `--without-ssl --with-polarssl`
+ - mbedTLS: `--without-ssl --with-mbedtls`
+ - axTLS: `--without-ssl --with-axtls`
+ - schannel: `--without-ssl --with-winssl`
+ - secure transport: `--with-winssl --with-darwinssl`
+
+# Windows
+
+## Building Windows DLLs and C run-time (CRT) linkage issues
+
+ As a general rule, building a DLL with static CRT linkage is highly
+ discouraged, and intermixing CRTs in the same app is something to avoid at
+ any cost.
+
+ Reading and comprehending Microsoft Knowledge Base articles KB94248 and
+ KB140584 is a must for any Windows developer. Especially important is full
+ understanding if you are not going to follow the advice given above.
+
+ - [How To Use the C Run-Time](https://support.microsoft.com/kb/94248/en-us)
+ - [How to link with the correct C Run-Time CRT library](https://support.microsoft.com/kb/140584/en-us)
+ - [Potential Errors Passing CRT Objects Across DLL Boundaries](https://msdn.microsoft.com/en-us/library/ms235460)
+
+If your app is misbehaving in some strange way, or it is suffering from
+memory corruption, before asking for further help, please try first to
+rebuild every single library your app uses as well as your app using the
+debug multithreaded dynamic C runtime.
+
+ If you get linkage errors read section 5.7 of the FAQ document.
+
+## MingW32
+
+Make sure that MinGW32's bin dir is in the search path, for example:
+
+ set PATH=c:\mingw32\bin;%PATH%
+
+then run `mingw32-make mingw32` in the root dir. There are other
+make targets available to build libcurl with more features, use:
+
+ - `mingw32-make mingw32-zlib` to build with Zlib support;
+ - `mingw32-make mingw32-ssl-zlib` to build with SSL and Zlib enabled;
+ - `mingw32-make mingw32-ssh2-ssl-zlib` to build with SSH2, SSL, Zlib;
+ - `mingw32-make mingw32-ssh2-ssl-sspi-zlib` to build with SSH2, SSL, Zlib
+ and SSPI support.
+
+If you have any problems linking libraries or finding header files, be sure
+to verify that the provided "Makefile.m32" files use the proper paths, and
+adjust as necessary. It is also possible to override these paths with
+environment variables, for example:
+
+ set ZLIB_PATH=c:\zlib-1.2.8
+ set OPENSSL_PATH=c:\openssl-1.0.2c
+ set LIBSSH2_PATH=c:\libssh2-1.6.0
+
+It is also possible to build with other LDAP SDKs than MS LDAP; currently
+it is possible to build with native Win32 OpenLDAP, or with the Novell CLDAP
+SDK. If you want to use these you need to set these vars:
+
+ set LDAP_SDK=c:\openldap
+ set USE_LDAP_OPENLDAP=1
+
+or for using the Novell SDK:
+
+ set USE_LDAP_NOVELL=1
+
+If you want to enable LDAPS support then set LDAPS=1.
+
+## Cygwin
+
+Almost identical to the unix installation. Run the configure script in the
+curl source tree root with `sh configure`. Make sure you have the sh
+executable in /bin/ or you'll see the configure fail toward the end.
+
+Run `make`
+
+## Borland C++ compiler
+
+Ensure that your build environment is properly set up to use the compiler and
+associated tools. PATH environment variable must include the path to bin
+subdirectory of your compiler installation, eg: `c:\Borland\BCC55\bin`
+
+It is advisable to set environment variable BCCDIR to the base path of the
+compiler installation.
+
+ set BCCDIR=c:\Borland\BCC55
+
+In order to build a plain vanilla version of curl and libcurl run the
+following command from curl's root directory:
+
+ make borland
+
+To build curl and libcurl with zlib and OpenSSL support set environment
+variables `ZLIB_PATH` and `OPENSSL_PATH` to the base subdirectories of the
+already built zlib and OpenSSL libraries and from curl's root directory run
+command:
+
+ make borland-ssl-zlib
+
+libcurl library will be built in 'lib' subdirectory while curl tool is built
+in 'src' subdirectory. In order to use libcurl library it is advisable to
+modify compiler's configuration file bcc32.cfg located in
+`c:\Borland\BCC55\bin` to reflect the location of libraries include paths for
+example the '-I' line could result in something like:
+
+ -I"c:\Borland\BCC55\include;c:\curl\include;c:\openssl\inc32"
+
+bcc3.cfg `-L` line could also be modified to reflect the location of of
+libcurl library resulting for example:
+
+ -L"c:\Borland\BCC55\lib;c:\curl\lib;c:\openssl\out32"
+
+In order to build sample program `simple.c` from the docs\examples
+subdirectory run following command from mentioned subdirectory:
+
+ bcc32 simple.c libcurl.lib cw32mt.lib
+
+In order to build sample program simplessl.c an SSL enabled libcurl is
+required, as well as the OpenSSL libeay32.lib and ssleay32.lib libraries.
+
+## Disabling Specific Protocols in Windows builds
+
+The configure utility, unfortunately, is not available for the Windows
+environment, therefore, you cannot use the various disable-protocol options of
+the configure utility on this platform.
+
+However, you can use the following defines to disable specific
+protocols:
+
+ - `HTTP_ONLY` disables all protocols except HTTP
+ - `CURL_DISABLE_FTP` disables FTP
+ - `CURL_DISABLE_LDAP` disables LDAP
+ - `CURL_DISABLE_TELNET` disables TELNET
+ - `CURL_DISABLE_DICT` disables DICT
+ - `CURL_DISABLE_FILE` disables FILE
+ - `CURL_DISABLE_TFTP` disables TFTP
+ - `CURL_DISABLE_HTTP` disables HTTP
+ - `CURL_DISABLE_IMAP` disables IMAP
+ - `CURL_DISABLE_POP3` disables POP3
+ - `CURL_DISABLE_SMTP` disables SMTP
+
+If you want to set any of these defines you have the following options:
+
+ - Modify lib/config-win32.h
+ - Modify lib/curl_setup.h
+ - Modify lib/Makefile.vc6
+ - Modify the "Preprocessor Definitions" in the libcurl project
+
+Note: The pre-processor settings can be found using the Visual Studio IDE
+under "Project -> Settings -> C/C++ -> General" in VC6 and "Project ->
+Properties -> Configuration Properties -> C/C++ -> Preprocessor" in later
+versions.
+
+## Using BSD-style lwIP instead of Winsock TCP/IP stack in Win32 builds
+
+In order to compile libcurl and curl using BSD-style lwIP TCP/IP stack it is
+necessary to make definition of preprocessor symbol USE_LWIPSOCK visible to
+libcurl and curl compilation processes. To set this definition you have the
+following alternatives:
+
+ - Modify lib/config-win32.h and src/config-win32.h
+ - Modify lib/Makefile.vc6
+ - Modify the "Preprocessor Definitions" in the libcurl project
+
+Note: The pre-processor settings can be found using the Visual Studio IDE
+under "Project -> Settings -> C/C++ -> General" in VC6 and "Project ->
+Properties -> Configuration Properties -> C/C++ -> Preprocessor" in later
+versions.
+
+Once that libcurl has been built with BSD-style lwIP TCP/IP stack support, in
+order to use it with your program it is mandatory that your program includes
+lwIP header file `<lwip/opt.h>` (or another lwIP header that includes this)
+before including any libcurl header. Your program does not need the
+`USE_LWIPSOCK` preprocessor definition which is for libcurl internals only.
+
+Compilation has been verified with [lwIP
+1.4.0](http://download.savannah.gnu.org/releases/lwip/lwip-1.4.0.zip) and
+[contrib-1.4.0](http://download.savannah.gnu.org/releases/lwip/contrib-1.4.0.zip).
+
+This BSD-style lwIP TCP/IP stack support must be considered experimental given
+that it has been verified that lwIP 1.4.0 still needs some polish, and libcurl
+might yet need some additional adjustment, caveat emptor.
+
+## Important static libcurl usage note
+
+When building an application that uses the static libcurl library on Windows,
+you must add `-DCURL_STATICLIB` to your `CFLAGS`. Otherwise the linker will
+look for dynamic import symbols.
+
+## Legacy Windows and SSL
+
+WinSSL (specifically SChannel from Windows SSPI), is the native SSL library in
+Windows. However, WinSSL in Windows <= XP is unable to connect to servers that
+no longer support the legacy handshakes and algorithms used by those
+versions. If you will be using curl in one of those earlier versions of
+Windows you should choose another SSL backend such as OpenSSL.
+
+# Apple iOS and Mac OS X
+
+On modern Apple operating systems, curl can be built to use Apple's SSL/TLS
+implementation, Secure Transport, instead of OpenSSL. To build with Secure
+Transport for SSL/TLS, use the configure option `--with-darwinssl`. (It is not
+necessary to use the option `--without-ssl`.) This feature requires iOS 5.0 or
+later, or OS X 10.5 ("Leopard") or later.
+
+When Secure Transport is in use, the curl options `--cacert` and `--capath`
+and their libcurl equivalents, will be ignored, because Secure Transport uses
+the certificates stored in the Keychain to evaluate whether or not to trust
+the server. This, of course, includes the root certificates that ship with the
+OS. The `--cert` and `--engine` options, and their libcurl equivalents, are
+currently unimplemented in curl with Secure Transport.
+
+For OS X users: In OS X 10.8 ("Mountain Lion"), Apple made a major overhaul to
+the Secure Transport API that, among other things, added support for the newer
+TLS 1.1 and 1.2 protocols. To get curl to support TLS 1.1 and 1.2, you must
+build curl on Mountain Lion or later, or by using the equivalent SDK. If you
+set the `MACOSX_DEPLOYMENT_TARGET` environmental variable to an earlier
+version of OS X prior to building curl, then curl will use the new Secure
+Transport API on Mountain Lion and later, and fall back on the older API when
+the same curl binary is executed on older cats. For example, running these
+commands in curl's directory in the shell will build the code such that it
+will run on cats as old as OS X 10.6 ("Snow Leopard") (using bash):
+
+ export MACOSX_DEPLOYMENT_TARGET="10.6"
+ ./configure --with-darwinssl
+ make
+
+# Cross compile
+
+Download and unpack the curl package.
+
+'cd' to the new directory. (e.g. `cd curl-7.12.3`)
+
+Set environment variables to point to the cross-compile toolchain and call
+configure with any options you need. Be sure and specify the `--host` and
+`--build` parameters at configuration time. The following script is an
+example of cross-compiling for the IBM 405GP PowerPC processor using the
+toolchain from MonteVista for Hardhat Linux.
+
+ #! /bin/sh
+
+ export PATH=$PATH:/opt/hardhat/devkit/ppc/405/bin
+ export CPPFLAGS="-I/opt/hardhat/devkit/ppc/405/target/usr/include"
+ export AR=ppc_405-ar
+ export AS=ppc_405-as
+ export LD=ppc_405-ld
+ export RANLIB=ppc_405-ranlib
+ export CC=ppc_405-gcc
+ export NM=ppc_405-nm
+
+ ./configure --target=powerpc-hardhat-linux
+ --host=powerpc-hardhat-linux
+ --build=i586-pc-linux-gnu
+ --prefix=/opt/hardhat/devkit/ppc/405/target/usr/local
+ --exec-prefix=/usr/local
+
+You may also need to provide a parameter like `--with-random=/dev/urandom` to
+configure as it cannot detect the presence of a random number generating
+device for a target system. The `--prefix` parameter specifies where curl
+will be installed. If `configure` completes successfully, do `make` and `make
+install` as usual.
+
+In some cases, you may be able to simplify the above commands to as little as:
+
+ ./configure --host=ARCH-OS
+
+# REDUCING SIZE
+
+There are a number of configure options that can be used to reduce the size of
+libcurl for embedded applications where binary size is an important factor.
+First, be sure to set the CFLAGS variable when configuring with any relevant
+compiler optimization flags to reduce the size of the binary. For gcc, this
+would mean at minimum the -Os option, and potentially the `-march=X`,
+`-mdynamic-no-pic` and `-flto` options as well, e.g.
+
+ ./configure CFLAGS='-Os' LDFLAGS='-Wl,-Bsymbolic'...
+
+Note that newer compilers often produce smaller code than older versions
+due to improved optimization.
+
+Be sure to specify as many `--disable-` and `--without-` flags on the
+configure command-line as you can to disable all the libcurl features that you
+know your application is not going to need. Besides specifying the
+`--disable-PROTOCOL` flags for all the types of URLs your application will not
+use, here are some other flags that can reduce the size of the library:
+
+ - `--disable-ares` (disables support for the C-ARES DNS library)
+ - `--disable-cookies` (disables support for HTTP cookies)
+ - `--disable-crypto-auth` (disables HTTP cryptographic authentication)
+ - `--disable-ipv6` (disables support for IPv6)
+ - `--disable-manual` (disables support for the built-in documentation)
+ - `--disable-proxy` (disables support for HTTP and SOCKS proxies)
+ - `--disable-unix-sockets` (disables support for UNIX sockets)
+ - `--disable-verbose` (eliminates debugging strings and error code strings)
+ - `--disable-versioned-symbols` (disables support for versioned symbols)
+ - `--enable-hidden-symbols` (eliminates unneeded symbols in the shared library)
+ - `--without-libidn` (disables support for the libidn DNS library)
+ - `--without-librtmp` (disables support for RTMP)
+ - `--without-ssl` (disables support for SSL/TLS)
+ - `--without-zlib` (disables support for on-the-fly decompression)
+
+The GNU compiler and linker have a number of options that can reduce the
+size of the libcurl dynamic libraries on some platforms even further.
+Specify them by providing appropriate CFLAGS and LDFLAGS variables on the
+configure command-line, e.g.
+
+ CFLAGS="-Os -ffunction-sections -fdata-sections
+ -fno-unwind-tables -fno-asynchronous-unwind-tables -flto"
+ LDFLAGS="-Wl,-s -Wl,-Bsymbolic -Wl,--gc-sections"
+
+Be sure also to strip debugging symbols from your binaries after compiling
+using 'strip' (or the appropriate variant if cross-compiling). If space is
+really tight, you may be able to remove some unneeded sections of the shared
+library using the -R option to objcopy (e.g. the .comment section).
+
+Using these techniques it is possible to create a basic HTTP-only shared
+libcurl library for i386 Linux platforms that is only 109 KiB in size, and an
+FTP-only library that is 109 KiB in size (as of libcurl version 7.45.0, using
+gcc 4.9.2).
+
+You may find that statically linking libcurl to your application will result
+in a lower total size than dynamically linking.
+
+Note that the curl test harness can detect the use of some, but not all, of
+the `--disable` statements suggested above. Use will cause tests relying on
+those features to fail. The test harness can be manually forced to skip the
+relevant tests by specifying certain key words on the runtests.pl command
+line. Following is a list of appropriate key words:
+
+ - `--disable-cookies` !cookies
+ - `--disable-manual` !--manual
+ - `--disable-proxy` !HTTP\ proxy !proxytunnel !SOCKS4 !SOCKS5
+
+# PORTS
+
+This is a probably incomplete list of known hardware and operating systems
+that curl has been compiled for. If you know a system curl compiles and
+runs on, that isn't listed, please let us know!
+
+ - Alpha DEC OSF 4
+ - Alpha Digital UNIX v3.2
+ - Alpha FreeBSD 4.1, 4.5
+ - Alpha Linux 2.2, 2.4
+ - Alpha NetBSD 1.5.2
+ - Alpha OpenBSD 3.0
+ - Alpha OpenVMS V7.1-1H2
+ - Alpha Tru64 v5.0 5.1
+ - AVR32 Linux
+ - ARM Android 1.5, 2.1, 2.3, 3.2, 4.x
+ - ARM INTEGRITY
+ - ARM iOS
+ - Cell Linux
+ - Cell Cell OS
+ - HP-PA HP-UX 9.X 10.X 11.X
+ - HP-PA Linux
+ - HP3000 MPE/iX
+ - MicroBlaze uClinux
+ - MIPS IRIX 6.2, 6.5
+ - MIPS Linux
+ - OS/400
+ - Pocket PC/Win CE 3.0
+ - Power AIX 3.2.5, 4.2, 4.3.1, 4.3.2, 5.1, 5.2
+ - PowerPC Darwin 1.0
+ - PowerPC INTEGRITY
+ - PowerPC Linux
+ - PowerPC Mac OS 9
+ - PowerPC Mac OS X
+ - SH4 Linux 2.6.X
+ - SH4 OS21
+ - SINIX-Z v5
+ - Sparc Linux
+ - Sparc Solaris 2.4, 2.5, 2.5.1, 2.6, 7, 8, 9, 10
+ - Sparc SunOS 4.1.X
+ - StrongARM (and other ARM) RISC OS 3.1, 4.02
+ - StrongARM/ARM7/ARM9 Linux 2.4, 2.6
+ - StrongARM NetBSD 1.4.1
+ - Symbian OS (P.I.P.S.) 9.x
+ - TPF
+ - Ultrix 4.3a
+ - UNICOS 9.0
+ - i386 BeOS
+ - i386 DOS
+ - i386 eCos 1.3.1
+ - i386 Esix 4.1
+ - i386 FreeBSD
+ - i386 HURD
+ - i386 Haiku OS
+ - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4, 2.6
+ - i386 Mac OS X
+ - i386 MINIX 3.1
+ - i386 NetBSD
+ - i386 Novell NetWare
+ - i386 OS/2
+ - i386 OpenBSD
+ - i386 QNX 6
+ - i386 SCO unix
+ - i386 Solaris 2.7
+ - i386 Windows 95, 98, ME, NT, 2000, XP, 2003
+ - i486 ncr-sysv4.3.03 (NCR MP-RAS)
+ - ia64 Linux 2.3.99
+ - m68k AmigaOS 3
+ - m68k Linux
+ - m68k uClinux
+ - m68k OpenBSD
+ - m88k dg-dgux5.4R3.00
+ - s390 Linux
+ - x86_64 Linux
+ - XScale/PXA250 Linux 2.4
+ - Nios II uClinux
diff --git a/docs/Makefile.am b/docs/Makefile.am
index 97f8389b3..1040844b6 100644
--- a/docs/Makefile.am
+++ b/docs/Makefile.am
@@ -33,12 +33,12 @@ SUBDIRS = examples libcurl
CLEANFILES = $(GENHTMLPAGES) $(PDFPAGES)
-EXTRA_DIST = MANUAL BUGS CONTRIBUTE.md FAQ FEATURES INTERNALS.md \
- SSLCERTS.md README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS \
- VERSIONS KNOWN_BUGS BINDINGS $(man_MANS) HISTORY.md INSTALL \
- LICENSE-MIXING.md README.netware INSTALL.devcpp MAIL-ETIQUETTE \
- HTTP-COOKIES.md SECURITY.md RELEASE-PROCEDURE SSL-PROBLEMS.md HTTP2.md \
- ROADMAP.md CODE_OF_CONDUCT.md CODE_STYLE.md CHECKSRC.md
+EXTRA_DIST = MANUAL BUGS CONTRIBUTE.md FAQ FEATURES INTERNALS.md SSLCERTS.md \
+ README.win32 RESOURCES TODO TheArtOfHttpScripting THANKS VERSIONS KNOWN_BUGS \
+ BINDINGS $(man_MANS) HISTORY.md INSTALL INSTALL.md LICENSE-MIXING.md \
+ README.netware MAIL-ETIQUETTE HTTP-COOKIES.md SECURITY.md RELEASE-PROCEDURE \
+ SSL-PROBLEMS.md HTTP2.md ROADMAP.md CODE_OF_CONDUCT.md CODE_STYLE.md \
+ CHECKSRC.md
MAN2HTML= roffit $< >$@