diff options
Diffstat (limited to 'lib/curl_pop3.c')
| -rw-r--r-- | lib/curl_pop3.c | 1764 |
1 files changed, 1764 insertions, 0 deletions
diff --git a/lib/curl_pop3.c b/lib/curl_pop3.c new file mode 100644 index 000000000..0d157f00b --- /dev/null +++ b/lib/curl_pop3.c @@ -0,0 +1,1764 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * RFC1734 POP3 Authentication + * RFC1939 POP3 protocol + * RFC2195 CRAM-MD5 authentication + * RFC2384 POP URL Scheme + * RFC2449 POP3 Extension Mechanism + * RFC2595 Using TLS with IMAP, POP3 and ACAP + * RFC2831 DIGEST-MD5 authentication + * RFC4616 PLAIN authentication + * + ***************************************************************************/ + +#include "curl_setup.h" + +#ifndef CURL_DISABLE_POP3 + +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_UTSNAME_H +#include <sys/utsname.h> +#endif +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef __VMS +#include <in.h> +#include <inet.h> +#endif + +#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) +#undef in_addr_t +#define in_addr_t unsigned long +#endif + +#include <curl/curl.h> +#include "curl_urldata.h" +#include "curl_sendf.h" +#include "curl_if2ip.h" +#include "curl_hostip.h" +#include "curl_progress.h" +#include "curl_transfer.h" +#include "curl_escape.h" +#include "curl_http.h" /* for HTTP proxy tunnel stuff */ +#include "curl_socks.h" +#include "curl_pop3.h" + +#include "curl_strtoofft.h" +#include "curl_strequal.h" +#include "curl_sslgen.h" +#include "curl_connect.h" +#include "curl_strerror.h" +#include "curl_select.h" +#include "curl_multiif.h" +#include "curl_url.h" +#include "curl_rawstr.h" +#include "curl_sasl.h" +#include "curl_md5.h" +#include "curl_warnless.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> + +#include "curl_memory.h" +/* The last #include file should be: */ +#include "curl_memdebug.h" + +/* Local API functions */ +static CURLcode pop3_parse_url_path(struct connectdata *conn); +static CURLcode pop3_parse_custom_request(struct connectdata *conn); +static CURLcode pop3_regular_transfer(struct connectdata *conn, bool *done); +static CURLcode pop3_do(struct connectdata *conn, bool *done); +static CURLcode pop3_done(struct connectdata *conn, CURLcode status, + bool premature); +static CURLcode pop3_connect(struct connectdata *conn, bool *done); +static CURLcode pop3_disconnect(struct connectdata *conn, bool dead); +static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done); +static int pop3_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); +static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done); +static CURLcode pop3_setup_connection(struct connectdata *conn); + +/* + * POP3 protocol handler. + */ + +const struct Curl_handler Curl_handler_pop3 = { + "POP3", /* scheme */ + pop3_setup_connection, /* setup_connection */ + pop3_do, /* do_it */ + pop3_done, /* done */ + ZERO_NULL, /* do_more */ + pop3_connect, /* connect_it */ + pop3_multi_statemach, /* connecting */ + pop3_doing, /* doing */ + pop3_getsock, /* proto_getsock */ + pop3_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + pop3_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3, /* defport */ + CURLPROTO_POP3, /* protocol */ + PROTOPT_CLOSEACTION | PROTOPT_NOURLQUERY /* flags */ +}; + +#ifdef USE_SSL +/* + * POP3S protocol handler. + */ + +const struct Curl_handler Curl_handler_pop3s = { + "POP3S", /* scheme */ + pop3_setup_connection, /* setup_connection */ + pop3_do, /* do_it */ + pop3_done, /* done */ + ZERO_NULL, /* do_more */ + pop3_connect, /* connect_it */ + pop3_multi_statemach, /* connecting */ + pop3_doing, /* doing */ + pop3_getsock, /* proto_getsock */ + pop3_getsock, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + pop3_disconnect, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3S, /* defport */ + CURLPROTO_POP3 | CURLPROTO_POP3S, /* protocol */ + PROTOPT_CLOSEACTION | PROTOPT_SSL + | PROTOPT_NOURLQUERY /* flags */ +}; +#endif + +#ifndef CURL_DISABLE_HTTP +/* + * HTTP-proxyed POP3 protocol handler. + */ + +static const struct Curl_handler Curl_handler_pop3_proxy = { + "POP3", /* scheme */ + ZERO_NULL, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3, /* defport */ + CURLPROTO_HTTP, /* protocol */ + PROTOPT_NONE /* flags */ +}; + +#ifdef USE_SSL +/* + * HTTP-proxyed POP3S protocol handler. + */ + +static const struct Curl_handler Curl_handler_pop3s_proxy = { + "POP3S", /* scheme */ + ZERO_NULL, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* domore_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + ZERO_NULL, /* readwrite */ + PORT_POP3S, /* defport */ + CURLPROTO_HTTP, /* protocol */ + PROTOPT_NONE /* flags */ +}; +#endif +#endif + +/* Function that checks for an ending pop3 status code at the start of the + given string, but also detects the APOP timestamp from the server greeting + as well as the supported authentication types and allowed SASL mechanisms + from the CAPA response. */ +static int pop3_endofresp(struct pingpong *pp, int *resp) +{ + char *line = pp->linestart_resp; + size_t len = strlen(pp->linestart_resp); + struct connectdata *conn = pp->conn; + struct pop3_conn *pop3c = &conn->proto.pop3c; + size_t wordlen; + size_t i; + + /* Do we have an error response? */ + if(len >= 4 && !memcmp("-ERR", line, 4)) { + *resp = '-'; + + return FALSE; + } + + /* Are we processing servergreet responses */ + if(pop3c->state == POP3_SERVERGREET) { + /* Look for the APOP timestamp */ + if(len >= 3 && line[len - 3] == '>') { + for(i = 0; i < len - 3; ++i) { + if(line[i] == '<') { + /* Calculate the length of the timestamp */ + size_t timestamplen = len - 2 - i; + + /* Allocate some memory for the timestamp */ + pop3c->apoptimestamp = (char *)calloc(1, timestamplen + 1); + + if(!pop3c->apoptimestamp) + break; + + /* Copy the timestamp */ + memcpy(pop3c->apoptimestamp, line + i, timestamplen); + pop3c->apoptimestamp[timestamplen] = '\0'; + break; + } + } + } + } + /* Are we processing CAPA command responses? */ + else if(pop3c->state == POP3_CAPA) { + + /* Do we have the terminating character? */ + if(len >= 1 && !memcmp(line, ".", 1)) { + *resp = '+'; + + return TRUE; + } + + /* Does the server support clear text? */ + if(len >= 4 && !memcmp(line, "USER", 4)) { + pop3c->authtypes |= POP3_TYPE_CLEARTEXT; + return FALSE; + } + + /* Does the server support APOP? */ + if(len >= 4 && !memcmp(line, "APOP", 4)) { + pop3c->authtypes |= POP3_TYPE_APOP; + return FALSE; + } + + /* Does the server support SASL? */ + if(len < 4 || memcmp(line, "SASL", 4)) + return FALSE; + + pop3c->authtypes |= POP3_TYPE_SASL; + + /* Advance past the SASL keyword */ + line += 4; + len -= 4; + + /* Loop through the data line */ + for(;;) { + while(len && + (*line == ' ' || *line == '\t' || + *line == '\r' || *line == '\n')) { + + if(*line == '\n') + return FALSE; + + line++; + len--; + } + + if(!len) + break; + + /* Extract the word */ + for(wordlen = 0; wordlen < len && line[wordlen] != ' ' && + line[wordlen] != '\t' && line[wordlen] != '\r' && + line[wordlen] != '\n';) + wordlen++; + + /* Test the word for a matching authentication mechanism */ + if(wordlen == 5 && !memcmp(line, "LOGIN", 5)) + pop3c->authmechs |= SASL_MECH_LOGIN; + else if(wordlen == 5 && !memcmp(line, "PLAIN", 5)) + pop3c->authmechs |= SASL_MECH_PLAIN; + else if(wordlen == 8 && !memcmp(line, "CRAM-MD5", 8)) + pop3c->authmechs |= SASL_MECH_CRAM_MD5; + else if(wordlen == 10 && !memcmp(line, "DIGEST-MD5", 10)) + pop3c->authmechs |= SASL_MECH_DIGEST_MD5; + else if(wordlen == 6 && !memcmp(line, "GSSAPI", 6)) + pop3c->authmechs |= SASL_MECH_GSSAPI; + else if(wordlen == 8 && !memcmp(line, "EXTERNAL", 8)) + pop3c->authmechs |= SASL_MECH_EXTERNAL; + else if(wordlen == 4 && !memcmp(line, "NTLM", 4)) + pop3c->authmechs |= SASL_MECH_NTLM; + + line += wordlen; + len -= wordlen; + } + } + + if((len < 1 || memcmp("+", line, 1)) && + (len < 3 || memcmp("+OK", line, 3))) + return FALSE; /* Nothing for us */ + + /* Otherwise it's a positive response */ + *resp = '+'; + + return TRUE; +} + +/* This is the ONLY way to change POP3 state! */ +static void state(struct connectdata *conn, pop3state newstate) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + /* for debug purposes */ + static const char * const names[] = { + "STOP", + "SERVERGREET", + "STARTTLS", + "CAPA", + "AUTH_PLAIN", + "AUTH_LOGIN", + "AUTH_LOGIN_PASSWD", + "AUTH_CRAMMD5", + "AUTH_DIGESTMD5", + "AUTH_DIGESTMD5_RESP", + "AUTH_NTLM", + "AUTH_NTLM_TYPE2MSG", + "AUTH", + "APOP", + "USER", + "PASS", + "COMMAND", + "QUIT", + /* LAST */ + }; + + if(pop3c->state != newstate) + infof(conn->data, "POP3 %p state change from %s to %s\n", + pop3c, names[pop3c->state], names[newstate]); +#endif + + pop3c->state = newstate; +} + +static CURLcode pop3_state_capa(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + pop3c->authmechs = 0; /* No known authentication mechanisms yet */ + pop3c->authused = 0; /* Clear the authentication mechanism used */ + + /* Check we have a username and password to authenticate with and end the + connect phase if we don't */ + if(!conn->bits.user_passwd) { + state(conn, POP3_STOP); + + return result; + } + + /* Send the CAPA command */ + result = Curl_pp_sendf(&pop3c->pp, "CAPA"); + + if(result) + return result; + + state(conn, POP3_CAPA); + + return CURLE_OK; +} + +static CURLcode pop3_state_user(struct connectdata *conn) +{ + CURLcode result; + struct FTP *pop3 = conn->data->state.proto.pop3; + + /* Send the USER command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "USER %s", + pop3->user ? pop3->user : ""); + if(result) + return result; + + state(conn, POP3_USER); + + return CURLE_OK; +} + +#ifndef CURL_DISABLE_CRYPTO_AUTH +static CURLcode pop3_state_apop(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + size_t i; + MD5_context *ctxt; + unsigned char digest[MD5_DIGEST_LEN]; + char secret[2 * MD5_DIGEST_LEN + 1]; + + ctxt = Curl_MD5_init(Curl_DIGEST_MD5); + if(!ctxt) + return CURLE_OUT_OF_MEMORY; + + Curl_MD5_update(ctxt, (const unsigned char *) pop3c->apoptimestamp, + curlx_uztoui(strlen(pop3c->apoptimestamp))); + + Curl_MD5_update(ctxt, (const unsigned char *) conn->passwd, + curlx_uztoui(strlen(conn->passwd))); + + /* Finalise the digest */ + Curl_MD5_final(ctxt, digest); + + /* Convert the calculated 16 octet digest into a 32 byte hex string */ + for(i = 0; i < MD5_DIGEST_LEN; i++) + snprintf(&secret[2 * i], 3, "%02x", digest[i]); + + result = Curl_pp_sendf(&pop3c->pp, "APOP %s %s", conn->user, secret); + + if(!result) + state(conn, POP3_APOP); + + return result; +} +#endif + +static CURLcode pop3_authenticate(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + const char *mech = NULL; + pop3state authstate = POP3_STOP; + + /* Check supported authentication mechanisms by decreasing order of + security */ +#ifndef CURL_DISABLE_CRYPTO_AUTH + if(pop3c->authmechs & SASL_MECH_DIGEST_MD5) { + mech = "DIGEST-MD5"; + authstate = POP3_AUTH_DIGESTMD5; + pop3c->authused = SASL_MECH_DIGEST_MD5; + } + else if(pop3c->authmechs & SASL_MECH_CRAM_MD5) { + mech = "CRAM-MD5"; + authstate = POP3_AUTH_CRAMMD5; + pop3c->authused = SASL_MECH_CRAM_MD5; + } + else +#endif +#ifdef USE_NTLM + if(pop3c->authmechs & SASL_MECH_NTLM) { + mech = "NTLM"; + authstate = POP3_AUTH_NTLM; + pop3c->authused = SASL_MECH_NTLM; + } + else +#endif + if(pop3c->authmechs & SASL_MECH_LOGIN) { + mech = "LOGIN"; + authstate = POP3_AUTH_LOGIN; + pop3c->authused = SASL_MECH_LOGIN; + } + else if(pop3c->authmechs & SASL_MECH_PLAIN) { + mech = "PLAIN"; + authstate = POP3_AUTH_PLAIN; + pop3c->authused = SASL_MECH_PLAIN; + } + else { + infof(conn->data, "No known SASL authentication mechanisms supported!\n"); + result = CURLE_LOGIN_DENIED; /* Other mechanisms not supported */ + } + + if(!result) { + result = Curl_pp_sendf(&pop3c->pp, "AUTH %s", mech); + + if(!result) + state(conn, authstate); + } + + return result; +} + +/* For the POP3 "protocol connect" and "doing" phases only */ +static int pop3_getsock(struct connectdata *conn, curl_socket_t *socks, + int numsocks) +{ + return Curl_pp_getsock(&conn->proto.pop3c.pp, socks, numsocks); +} + +#ifdef USE_SSL +static void pop3_to_pop3s(struct connectdata *conn) +{ + conn->handler = &Curl_handler_pop3s; +} +#else +#define pop3_to_pop3s(x) Curl_nop_stmt +#endif + +/* For the initial server greeting */ +static CURLcode pop3_state_servergreet_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct pop3_conn *pop3c = &conn->proto.pop3c; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Got unexpected pop3-server response"); + return CURLE_FTP_WEIRD_SERVER_REPLY; + } + + if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) { + /* We don't have a SSL/TLS connection yet, but SSL is requested. Switch + to TLS connection now */ + result = Curl_pp_sendf(&pop3c->pp, "STLS"); + state(conn, POP3_STARTTLS); + } + else + result = pop3_state_capa(conn); + + return result; +} + +/* For STARTTLS responses */ +static CURLcode pop3_state_starttls_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + if(data->set.use_ssl != CURLUSESSL_TRY) { + failf(data, "STARTTLS denied. %c", pop3code); + result = CURLE_USE_SSL_FAILED; + } + else + result = pop3_state_capa(conn); + } + else { + /* Curl_ssl_connect is BLOCKING */ + result = Curl_ssl_connect(conn, FIRSTSOCKET); + if(CURLE_OK == result) { + pop3_to_pop3s(conn); + result = pop3_state_capa(conn); + } + } + + return result; +} + +/* For CAPA responses */ +static CURLcode pop3_state_capa_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') + result = pop3_state_user(conn); + else { + /* Check supported authentication types by decreasing order of security */ + if(conn->proto.pop3c.authtypes & POP3_TYPE_SASL) + result = pop3_authenticate(conn); +#ifndef CURL_DISABLE_CRYPTO_AUTH + else if(conn->proto.pop3c.authtypes & POP3_TYPE_APOP) + result = pop3_state_apop(conn); +#endif + else if(conn->proto.pop3c.authtypes & POP3_TYPE_CLEARTEXT) + result = pop3_state_user(conn); + else { + infof(conn->data, "No known authentication types supported!\n"); + result = CURLE_LOGIN_DENIED; /* Other types not supported */ + } + } + + return result; +} + +/* For AUTH PLAIN responses */ +static CURLcode pop3_state_auth_plain_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + size_t len = 0; + char *plainauth = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied. %c", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Create the authorisation message */ + result = Curl_sasl_create_plain_message(data, conn->user, conn->passwd, + &plainauth, &len); + + /* Send the message */ + if(!result) { + if(plainauth) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", plainauth); + + if(!result) + state(conn, POP3_AUTH); + } + + Curl_safefree(plainauth); + } + } + + return result; +} + +/* For AUTH LOGIN responses */ +static CURLcode pop3_state_auth_login_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + size_t len = 0; + char *authuser = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Create the user message */ + result = Curl_sasl_create_login_message(data, conn->user, + &authuser, &len); + + /* Send the user */ + if(!result) { + if(authuser) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", authuser); + + if(!result) + state(conn, POP3_AUTH_LOGIN_PASSWD); + } + + Curl_safefree(authuser); + } + } + + return result; +} + +/* For AUTH LOGIN user entry responses */ +static CURLcode pop3_state_auth_login_password_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + size_t len = 0; + char *authpasswd = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Create the password message */ + result = Curl_sasl_create_login_message(data, conn->passwd, + &authpasswd, &len); + + /* Send the password */ + if(!result) { + if(authpasswd) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", authpasswd); + + if(!result) + state(conn, POP3_AUTH); + } + + Curl_safefree(authpasswd); + } + } + + return result; +} + +#ifndef CURL_DISABLE_CRYPTO_AUTH +/* For AUTH CRAM-MD5 responses */ +static CURLcode pop3_state_auth_cram_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + char *chlg64 = data->state.buffer; + size_t len = 0; + char *rplyb64 = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + return CURLE_LOGIN_DENIED; + } + + /* Get the challenge */ + for(chlg64 += 2; *chlg64 == ' ' || *chlg64 == '\t'; chlg64++) + ; + + /* Terminate the challenge */ + if(*chlg64 != '=') { + for(len = strlen(chlg64); len--;) + if(chlg64[len] != '\r' && chlg64[len] != '\n' && chlg64[len] != ' ' && + chlg64[len] != '\t') + break; + + if(++len) { + chlg64[len] = '\0'; + } + } + + /* Create the response message */ + result = Curl_sasl_create_cram_md5_message(data, chlg64, conn->user, + conn->passwd, &rplyb64, &len); + + /* Send the response */ + if(!result) { + if(rplyb64) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", rplyb64); + + if(!result) + state(conn, POP3_AUTH); + } + + Curl_safefree(rplyb64); + } + + return result; +} + +/* For AUTH DIGEST-MD5 challenge responses */ +static CURLcode pop3_state_auth_digest_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + char *chlg64 = data->state.buffer; + size_t len = 0; + char *rplyb64 = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + return CURLE_LOGIN_DENIED; + } + + /* Get the challenge */ + for(chlg64 += 2; *chlg64 == ' ' || *chlg64 == '\t'; chlg64++) + ; + + /* Create the response message */ + result = Curl_sasl_create_digest_md5_message(data, chlg64, conn->user, + conn->passwd, "pop", + &rplyb64, &len); + + /* Send the response */ + if(!result) { + if(rplyb64) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", rplyb64); + + if(!result) + state(conn, POP3_AUTH_DIGESTMD5_RESP); + } + + Curl_safefree(rplyb64); + } + + return result; +} + +/* For AUTH DIGEST-MD5 challenge-response responses */ +static CURLcode pop3_state_auth_digest_resp_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Authentication failed: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Send an empty response */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, ""); + + if(!result) + state(conn, POP3_AUTH); + } + + return result; +} +#endif + +#ifdef USE_NTLM +/* For AUTH NTLM responses */ +static CURLcode pop3_state_auth_ntlm_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + size_t len = 0; + char *type1msg = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Create the type-1 message */ + result = Curl_sasl_create_ntlm_type1_message(conn->user, conn->passwd, + &conn->ntlm, + &type1msg, &len); + + /* Send the message */ + if(!result) { + if(type1msg) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", type1msg); + + if(!result) + state(conn, POP3_AUTH_NTLM_TYPE2MSG); + } + + Curl_safefree(type1msg); + } + } + + return result; +} + +/* For NTLM type-2 responses (sent in reponse to our type-1 message) */ +static CURLcode pop3_state_auth_ntlm_type2msg_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + size_t len = 0; + char *type3msg = NULL; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + else { + /* Create the type-3 message */ + result = Curl_sasl_create_ntlm_type3_message(data, + data->state.buffer + 2, + conn->user, conn->passwd, + &conn->ntlm, + &type3msg, &len); + + /* Send the message */ + if(!result) { + if(type3msg) { + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s", type3msg); + + if(!result) + state(conn, POP3_AUTH); + } + + Curl_safefree(type3msg); + } + } + + return result; +} +#endif + +/* For final responses to the AUTH sequence */ +static CURLcode pop3_state_auth_final_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Authentication failed: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + + /* End of connect phase */ + state(conn, POP3_STOP); + + return result; +} + +static CURLcode pop3_state_apop_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Authentication failed: %d", pop3code); + result = CURLE_LOGIN_DENIED; + } + + /* End of connect phase */ + state(conn, POP3_STOP); + + return result; +} + +/* For USER responses */ +static CURLcode pop3_state_user_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct FTP *pop3 = data->state.proto.pop3; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied. %c", pop3code); + result = CURLE_LOGIN_DENIED; + } + else + /* Send the PASS command */ + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "PASS %s", + pop3->passwd ? pop3->passwd : ""); + if(result) + return result; + + state(conn, POP3_PASS); + + return result; +} + +/* For PASS responses */ +static CURLcode pop3_state_pass_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + failf(data, "Access denied. %c", pop3code); + result = CURLE_LOGIN_DENIED; + } + + /* End of connect phase */ + state(conn, POP3_STOP); + + return result; +} + +/* Start the DO phase for the command */ +static CURLcode pop3_command(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + const char *command = NULL; + + /* Calculate the default command */ + if(pop3c->mailbox[0] == '\0' || conn->data->set.ftp_list_only) { + command = "LIST"; + + if(pop3c->mailbox[0] != '\0') { + /* Message specific LIST so skip the BODY transfer */ + struct FTP *pop3 = conn->data->state.proto.pop3; + pop3->transfer = FTPTRANSFER_INFO; + } + } + else + command = "RETR"; + + /* Send the command */ + if(pop3c->mailbox[0] != '\0') + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "%s %s", + (pop3c->custom && pop3c->custom[0] != '\0' ? + pop3c->custom : command), pop3c->mailbox); + else + result = Curl_pp_sendf(&conn->proto.pop3c.pp, + (pop3c->custom && pop3c->custom[0] != '\0' ? + pop3c->custom : command)); + + if(result) + return result; + + state(conn, POP3_COMMAND); + + return result; +} + +/* For command responses */ +static CURLcode pop3_state_command_resp(struct connectdata *conn, + int pop3code, + pop3state instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct FTP *pop3 = data->state.proto.pop3; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + + (void)instate; /* no use for this yet */ + + if(pop3code != '+') { + state(conn, POP3_STOP); + return CURLE_RECV_ERROR; + } + + /* This 'OK' line ends with a CR LF pair which is the two first bytes of the + EOB string so count this is two matching bytes. This is necessary to make + the code detect the EOB if the only data than comes now is %2e CR LF like + when there is no body to return. */ + pop3c->eob = 2; + + /* But since this initial CR LF pair is not part of the actual body, we set + the strip counter here so that these bytes won't be delivered. */ + pop3c->strip = 2; + + /* POP3 download */ + Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, pop3->bytecountp, + -1, NULL); /* no upload here */ + + if(pp->cache) { + /* The header "cache" contains a bunch of data that is actually body + content so send it as such. Note that there may even be additional + "headers" after the body */ + + if(!data->set.opt_no_body) { + result = Curl_pop3_write(conn, pp->cache, pp->cache_size); + if(result) + return result; + } + + /* Free the cache */ + Curl_safefree(pp->cache); + + /* Reset the cache size */ + pp->cache_size = 0; + } + + /* End of do phase */ + state(conn, POP3_STOP); + + return result; +} + +static CURLcode pop3_statemach_act(struct connectdata *conn) +{ + CURLcode result; + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + int pop3code; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + size_t nread = 0; + + /* Flush any data that needs to be sent */ + if(pp->sendleft) + return Curl_pp_flushsend(pp); + + /* Read the response from the server */ + result = Curl_pp_readresp(sock, pp, &pop3code, &nread); + if(result) + return result; + + if(pop3code) { + /* We have now received a full POP3 server response */ + switch(pop3c->state) { + case POP3_SERVERGREET: + result = pop3_state_servergreet_resp(conn, pop3code, pop3c->state); + break; + + case POP3_STARTTLS: + result = pop3_state_starttls_resp(conn, pop3code, pop3c->state); + break; + + case POP3_CAPA: + result = pop3_state_capa_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_PLAIN: + result = pop3_state_auth_plain_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_LOGIN: + result = pop3_state_auth_login_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_LOGIN_PASSWD: + result = pop3_state_auth_login_password_resp(conn, pop3code, + pop3c->state); + break; + +#ifndef CURL_DISABLE_CRYPTO_AUTH + case POP3_AUTH_CRAMMD5: + result = pop3_state_auth_cram_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_DIGESTMD5: + result = pop3_state_auth_digest_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_DIGESTMD5_RESP: + result = pop3_state_auth_digest_resp_resp(conn, pop3code, pop3c->state); + break; +#endif + +#ifdef USE_NTLM + case POP3_AUTH_NTLM: + result = pop3_state_auth_ntlm_resp(conn, pop3code, pop3c->state); + break; + + case POP3_AUTH_NTLM_TYPE2MSG: + result = pop3_state_auth_ntlm_type2msg_resp(conn, pop3code, + pop3c->state); + break; +#endif + + case POP3_AUTH: + result = pop3_state_auth_final_resp(conn, pop3code, pop3c->state); + break; + + case POP3_APOP: + result = pop3_state_apop_resp(conn, pop3code, pop3c->state); + break; + + case POP3_USER: + result = pop3_state_user_resp(conn, pop3code, pop3c->state); + break; + + case POP3_PASS: + result = pop3_state_pass_resp(conn, pop3code, pop3c->state); + break; + + case POP3_COMMAND: + result = pop3_state_command_resp(conn, pop3code, pop3c->state); + break; + + case POP3_QUIT: + /* fallthrough, just stop! */ + default: + /* internal error */ + state(conn, POP3_STOP); + break; + } + } + + return result; +} + +/* Called repeatedly until done from curl_multi.c */ +static CURLcode pop3_multi_statemach(struct connectdata *conn, bool *done) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + CURLcode result = Curl_pp_multi_statemach(&pop3c->pp); + + *done = (pop3c->state == POP3_STOP) ? TRUE : FALSE; + + return result; +} + +static CURLcode pop3_easy_statemach(struct connectdata *conn) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct pingpong *pp = &pop3c->pp; + CURLcode result = CURLE_OK; + + while(pop3c->state != POP3_STOP) { + result = Curl_pp_easy_statemach(pp); + if(result) + break; + } + + return result; +} + +/* Allocate and initialize the POP3 struct for the current SessionHandle if + required */ +static CURLcode pop3_init(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + struct FTP *pop3 = data->state.proto.pop3; + + if(!pop3) { + pop3 = data->state.proto.pop3 = calloc(sizeof(struct FTP), 1); + if(!pop3) + return CURLE_OUT_OF_MEMORY; + } + + /* Get some initial data into the pop3 struct */ + pop3->bytecountp = &data->req.bytecount; + + /* No need to duplicate user+password, the connectdata struct won't change + during a session, but we re-init them here since on subsequent inits + since the conn struct may have changed or been replaced. + */ + pop3->user = conn->user; + pop3->passwd = conn->passwd; + + return CURLE_OK; +} + +/*********************************************************************** + * + * pop3_connect() + * + * This function should do everything that is to be considered a part of the + * connection phase. + * + * The variable 'done' points to will be TRUE if the protocol-layer connect + * phase is done when this function returns, or FALSE is not. When called as + * a part of the easy interface, it will always be TRUE. + */ +static CURLcode pop3_connect(struct connectdata *conn, bool *done) +{ + CURLcode result; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct SessionHandle *data = conn->data; + struct pingpong *pp = &pop3c->pp; + + *done = FALSE; /* default to not done yet */ + + /* If there already is a protocol-specific struct allocated for this + sessionhandle, deal with it */ + Curl_reset_reqproto(conn); + + result = pop3_init(conn); + if(CURLE_OK != result) + return result; + + /* We always support persistent connections on pop3 */ + conn->bits.close = FALSE; + + pp->response_time = RESP_TIMEOUT; /* set default response time-out */ + pp->statemach_act = pop3_statemach_act; + pp->endofresp = pop3_endofresp; + pp->conn = conn; + + if(conn->handler->flags & PROTOPT_SSL) { + /* POP3S is simply pop3 with SSL for the control channel */ + /* so perform the SSL initialization for this socket */ + result = Curl_ssl_connect(conn, FIRSTSOCKET); + if(result) + return result; + } + + /* Initialise the response reader stuff */ + Curl_pp_init(pp); + + /* Start off waiting for the server greeting response */ + state(conn, POP3_SERVERGREET); + + if(data->state.used_interface == Curl_if_multi) + result = pop3_multi_statemach(conn, done); + else { + result = pop3_easy_statemach(conn); + if(!result) + *done = TRUE; + } + + return result; +} + +/*********************************************************************** + * + * pop3_done() + * + * The DONE function. This does what needs to be done after a single DO has + * performed. + * + * Input argument is already checked for validity. + */ +static CURLcode pop3_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + struct SessionHandle *data = conn->data; + struct FTP *pop3 = data->state.proto.pop3; + struct pop3_conn *pop3c = &conn->proto.pop3c; + CURLcode result = CURLE_OK; + + (void)premature; + + if(!pop3) + /* When the easy handle is removed from the multi while libcurl is still + * trying to resolve the host name, it seems that the pop3 struct is not + * yet initialized, but the removal action calls Curl_done() which calls + * this function. So we simply return success if no pop3 pointer is set. + */ + return CURLE_OK; + + if(status) { + conn->bits.close = TRUE; /* marked for closure */ + result = status; /* use the already set error code */ + } + + /* Cleanup our do based variables */ + Curl_safefree(pop3c->mailbox); + Curl_safefree(pop3c->custom); + + /* Clear the transfer mode for the next connection */ + pop3->transfer = FTPTRANSFER_BODY; + + return result; +} + +/*********************************************************************** + * + * pop3_perform() + * + * This is the actual DO function for POP3. Get a file/directory according to + * the options previously setup. + */ +static CURLcode pop3_perform(struct connectdata *conn, bool *connected, + bool *dophase_done) +{ + /* This is POP3 and no proxy */ + CURLcode result = CURLE_OK; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + if(conn->data->set.opt_no_body) { + /* Requested no body means no transfer */ + struct FTP *pop3 = conn->data->state.proto.pop3; + pop3->transfer = FTPTRANSFER_INFO; + } + + *dophase_done = FALSE; /* not done yet */ + + /* Start the first command in the DO phase */ + result = pop3_command(conn); + if(result) + return result; + + /* Run the state-machine */ + if(conn->data->state.used_interface == Curl_if_multi) + result = pop3_multi_statemach(conn, dophase_done); + else { + result = pop3_easy_statemach(conn); + *dophase_done = TRUE; /* with the easy interface we are done here */ + } + *connected = conn->bits.tcpconnect[FIRSTSOCKET]; + + if(*dophase_done) + DEBUGF(infof(conn->data, "DO phase is complete\n")); + + return result; +} + +/*********************************************************************** + * + * pop3_do() + * + * This function is registered as 'curl_do' function. It decodes the path + * parts etc as a wrapper to the actual DO function (pop3_perform). + * + * The input argument is already checked for validity. + */ +static CURLcode pop3_do(struct connectdata *conn, bool *done) +{ + CURLcode retcode = CURLE_OK; + + *done = FALSE; /* default to false */ + + /* + Since connections can be re-used between SessionHandles, this might be a + connection already existing but on a fresh SessionHandle struct so we must + make sure we have a good 'struct POP3' to play with. For new connections, + the struct POP3 is allocated and setup in the pop3_connect() function. + */ + Curl_reset_reqproto(conn); + retcode = pop3_init(conn); + if(retcode) + return retcode; + + /* Parse the URL path */ + retcode = pop3_parse_url_path(conn); + if(retcode) + return retcode; + + /* Parse the custom request */ + retcode = pop3_parse_custom_request(conn); + if(retcode) + return retcode; + + retcode = pop3_regular_transfer(conn, done); + + return retcode; +} + +/*********************************************************************** + * + * pop3_quit() + * + * This should be called before calling sclose(). We should then wait for the + * response from the server before returning. The calling code should then try + * to close the connection. + */ +static CURLcode pop3_quit(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + result = Curl_pp_sendf(&conn->proto.pop3c.pp, "QUIT", NULL); + if(result) + return result; + + state(conn, POP3_QUIT); + + result = pop3_easy_statemach(conn); + + return result; +} + +/*********************************************************************** + * + * pop3_disconnect() + * + * Disconnect from an POP3 server. Cleanup protocol-specific per-connection + * resources. BLOCKING. + */ +static CURLcode pop3_disconnect(struct connectdata *conn, + bool dead_connection) +{ + struct pop3_conn *pop3c = &conn->proto.pop3c; + + /* We cannot send quit unconditionally. If this connection is stale or + bad in any way, sending quit and waiting around here will make the + disconnect wait in vain and cause more problems than we need to */ + + /* The POP3 session may or may not have been allocated/setup at this + point! */ + if(!dead_connection && pop3c->pp.conn) + (void)pop3_quit(conn); /* ignore errors on the LOGOUT */ + + /* Disconnect from the server */ + Curl_pp_disconnect(&pop3c->pp); + + /* Cleanup the SASL module */ + Curl_sasl_cleanup(conn, pop3c->authused); + + /* Cleanup our connection based variables */ + Curl_safefree(pop3c->apoptimestamp); + + return CURLE_OK; +} + +/*********************************************************************** + * + * pop3_parse_url_path() + * + * Parse the URL path into separate path components. + */ +static CURLcode pop3_parse_url_path(struct connectdata *conn) +{ + /* The POP3 struct is already initialised in pop3_connect() */ + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct SessionHandle *data = conn->data; + const char *path = data->state.path; + + /* URL decode the path and use this mailbox */ + return Curl_urldecode(data, path, 0, &pop3c->mailbox, NULL, TRUE); +} + +static CURLcode pop3_parse_custom_request(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct pop3_conn *pop3c = &conn->proto.pop3c; + struct SessionHandle *data = conn->data; + const char *custom = conn->data->set.str[STRING_CUSTOMREQUEST]; + + /* URL decode the custom request */ + if(custom) + result = Curl_urldecode(data, custom, 0, &pop3c->custom, NULL, TRUE); + + return result; +} + +/* Call this when the DO phase has completed */ +static CURLcode pop3_dophase_done(struct connectdata *conn, bool connected) +{ + struct FTP *pop3 = conn->data->state.proto.pop3; + + (void)connected; + + if(pop3->transfer != FTPTRANSFER_BODY) + /* no data to transfer */ + Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + + return CURLE_OK; +} + +/* Called from curl_multi.c while DOing */ +static CURLcode pop3_doing(struct connectdata *conn, bool *dophase_done) +{ + CURLcode result = pop3_multi_statemach(conn, dophase_done); + + if(result) + DEBUGF(infof(conn->data, "DO phase failed\n")); + else { + if(*dophase_done) { + result = pop3_dophase_done(conn, FALSE /* not connected */); + + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + } + + return result; +} + +/*********************************************************************** + * + * pop3_regular_transfer() + * + * The input argument is already checked for validity. + * + * Performs all commands done before a regular transfer between a local and a + * remote host. + */ +static CURLcode pop3_regular_transfer(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result = CURLE_OK; + bool connected = FALSE; + struct SessionHandle *data = conn->data; + + /* Make sure size is unknown at this point */ + data->req.size = -1; + + Curl_pgrsSetUploadCounter(data, 0); + Curl_pgrsSetDownloadCounter(data, 0); + Curl_pgrsSetUploadSize(data, 0); + Curl_pgrsSetDownloadSize(data, 0); + + result = pop3_perform(conn, &connected, dophase_done); + + if(CURLE_OK == result) { + if(!*dophase_done) + /* The DO phase has not completed yet */ + return CURLE_OK; + + result = pop3_dophase_done(conn, connected); + if(result) + return result; + } + + return result; +} + +static CURLcode pop3_setup_connection(struct connectdata * conn) +{ + struct SessionHandle *data = conn->data; + + if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) { + /* Unless we have asked to tunnel pop3 operations through the proxy, we + switch and use HTTP operations only */ +#ifndef CURL_DISABLE_HTTP + if(conn->handler == &Curl_handler_pop3) + conn->handler = &Curl_handler_pop3_proxy; + else { +#ifdef USE_SSL + conn->handler = &Curl_handler_pop3s_proxy; +#else + failf(data, "POP3S not supported!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + + /* We explicitly mark this connection as persistent here as we're doing + POP3 over HTTP and thus we accidentally avoid setting this value + otherwise */ + conn->bits.close = FALSE; +#else + failf(data, "POP3 over http proxy requires HTTP support built-in!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + + data->state.path++; /* don't include the initial slash */ + + return CURLE_OK; +} + +/* This function scans the body after the end-of-body and writes everything + until the end is found */ +CURLcode Curl_pop3_write(struct connectdata *conn, char *str, size_t nread) +{ + /* This code could be made into a special function in the handler struct */ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct SingleRequest *k = &data->req; + + struct pop3_conn *pop3c = &conn->proto.pop3c; + bool strip_dot = FALSE; + size_t last = 0; + size_t i; + + /* Search through the buffer looking for the end-of-body marker which is + 5 bytes (0d 0a 2e 0d 0a). Note that a line starting with a dot matches + the eob so the server will have prefixed it with an extra dot which we + need to strip out. Additionally the marker could of course be spread out + over 5 different data chunks */ + for(i = 0; i < nread; i++) { + size_t prev = pop3c->eob; + + switch(str[i]) { + case 0x0d: + if(pop3c->eob == 0) { + pop3c->eob++; + + if(i) { + /* Write out the body part that didn't match */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], + i - last); + + if(result) + return result; + + last = i; + } + } + else if(pop3c->eob == 3) + pop3c->eob++; + else + /* If the character match wasn't at position 0 or 3 then restart the + pattern matching */ + pop3c->eob = 1; + break; + + case 0x0a: + if(pop3c->eob == 1 || pop3c->eob == 4) + pop3c->eob++; + else + /* If the character match wasn't at position 1 or 4 then start the + search again */ + pop3c->eob = 0; + break; + + case 0x2e: + if(pop3c->eob == 2) + pop3c->eob++; + else if(pop3c->eob == 3) { + /* We have an extra dot after the CRLF which we need to strip off */ + strip_dot = TRUE; + pop3c->eob = 0; + } + else + /* If the character match wasn't at position 2 then start the search + again */ + pop3c->eob = 0; + break; + + default: + pop3c->eob = 0; + break; + } + + /* Did we have a partial match which has subsequently failed? */ + if(prev && prev >= pop3c->eob) { + /* Strip can only be non-zero for the very first mismatch after CRLF + and then both prev and strip are equal and nothing will be output + below */ + while(prev && pop3c->strip) { + prev--; + pop3c->strip--; + } + + if(prev) { + /* If the partial match was the CRLF and dot then only write the CRLF + as the server would have inserted the dot */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, (char*)POP3_EOB, + strip_dot ? prev - 1 : prev); + + if(result) + return result; + + last = i; + strip_dot = FALSE; + } + } + } + + if(pop3c->eob == POP3_EOB_LEN) { + /* We have a full match so the transfer is done, however we must transfer + the CRLF at the start of the EOB as this is considered to be part of the + message as per RFC-1939, sect. 3 */ + result = Curl_client_write(conn, CLIENTWRITE_BODY, (char *)POP3_EOB, 2); + + k->keepon &= ~KEEP_RECV; + pop3c->eob = 0; + + return result; + } + + if(pop3c->eob) + /* While EOB is matching nothing should be output */ + return CURLE_OK; + + if(nread - last) { + result = Curl_client_write(conn, CLIENTWRITE_BODY, &str[last], + nread - last); + } + + return result; +} + +#endif /* CURL_DISABLE_POP3 */ |