aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-03-20curl: add --false-start optionAlessandro Ghedini
2015-03-20nss: add support for TLS False StartAlessandro Ghedini
2015-03-20url: add CURLOPT_SSL_FALSESTART optionAlessandro Ghedini
This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart.
2015-03-20gtls: implement CURLOPT_CERTINFOAlessandro Ghedini
2015-03-20openssl: try to avoid accessing OCSP structs when possibleAlessandro Ghedini
2015-03-20CURLOPT_URL.3: spelling!Daniel Stenberg
Reported-by: Frank Gevaerts
2015-03-20CURLOPT_URL.3: Added "SECURITY CONCERNS"Daniel Stenberg
2015-03-20CURLOPT_HTTPHEADER.3: add a "SECURITY CONCERNS" sectionDaniel Stenberg
2015-03-19cyassl: detect the library as renamed wolfsslDan Fandrich
This change was made in CyaSSL/WolfSSL ver. 3.4.0
2015-03-19HTTP: don't switch to HTTP/2 from 1.1 until we get the 101Daniel Stenberg
We prematurely changed protocol handler to HTTP/2 which made things very slow (and wrong). Reported-by: Stefan Eissing Bug: https://github.com/bagder/curl/issues/169
2015-03-19axtls: version 1.5.2 now requires that config.h be manually includedDan Fandrich
2015-03-19metalink: fix resource leak in OOMDaniel Stenberg
Coverity CID 1288826
2015-03-18docs/libcurl: clean up libcurl-symbols.3Dan Fandrich
2015-03-18docs/libcurl: check that all options with man pages are referencedDan Fandrich
If a man page exists in the opts/ directory, it must also be referenced either in curl_easy_setopt.3 or curl_multi_setopt.3
2015-03-18curl_easy_setopt.3: added a few missing optionsDan Fandrich
2015-03-18nss: explicitly tell NSS to disable NPN/ALPNKamil Dudka
... if disabled at libcurl level. Otherwise, we would allow to negotiate NPN despite curl was invoked with the --no-npn option.
2015-03-18mkhelp: Remove trailing carriage return from every line of inputJay Satiro
- Get rid of this flood of warnings in Windows mingw build: warning: missing terminating " character The warning is due to the carriage return. When msysgit checks out files from the repo by default it converts the line endings to CRLF. Prior to this change when mkhelp.pl processed the MANUAL and curl.1 in CRLF format the trailing carriage returns caused unnecessary CR in the output.
2015-03-18RELEASE-NOTES: synced with e539f01567Daniel Stenberg
2015-03-18docs/libcurl: make portability fixChristian Weisgerber
Using $< in a non-suffix rule context is a GNU make idiom. This bug was introduced in 7.41.0.
2015-03-17checksrc: Fix whitelist on out-of-tree buildsDan Fandrich
2015-03-17Curl_sh_entry: remove unused 'timestamp'Stefan Bühler
2015-03-17HTTP: don't use Expect: headers when on HTTP/2Daniel Stenberg
Reported-by: Stefan Eissing Bug: https://github.com/bagder/curl/issues/169
2015-03-17checksrc: detect and remove space before trailing semicolonsDaniel Stenberg
2015-03-17checksrc: introduce a whitelisting conceptDaniel Stenberg
2015-03-17checksrc: use space after commaDaniel Stenberg
2015-03-17checksrc: use space before paren in "return (expr);"Daniel Stenberg
2015-03-17CONTRIBUTE: refer to git log instead of deprecated CHANGES fileDaniel Stenberg
2015-03-17CURLOPT_*.3: more examples and editsDaniel Stenberg
2015-03-17CURLOPT_*.3: added lots of small example sectionsDaniel Stenberg
2015-03-16CURLOPT_PRIVATE.3: provide an exampleDaniel Stenberg
2015-03-16CURLOPT_*TIMEOUT.3: provide examplesDaniel Stenberg
2015-03-16CURLOPT_USERAGENT.3: added an exampleDaniel Stenberg
2015-03-16CURLOPT_STDERR.3: added an exampleDaniel Stenberg
2015-03-16curl_easy_perform.3: remove superfluous close brace from exampleDaniel Stenberg
2015-03-16free: instead of Curl_safefree()Daniel Stenberg
Since we just started make use of free(NULL) in order to simplify code, this change takes it a step further and: - converts lots of Curl_safefree() calls to good old free() - makes Curl_safefree() not check the pointer before free() The (new) rule of thumb is: if you really want a function call that frees a pointer and then assigns it to NULL, then use Curl_safefree(). But we will prefer just using free() from now on.
2015-03-16Bug #149: Deletion of unnecessary checks before a few calls of cURL functionsMarkus Elfring
The following functions return immediately if a null pointer was passed. * Curl_cookie_cleanup * curl_formfree It is therefore not needed that a function caller repeats a corresponding check. This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-16Bug #149: Deletion of unnecessary checks before calls of the function "free"Markus Elfring
The function "free" is documented in the way that no action shall occur for a passed null pointer. It is therefore not needed that a function caller repeats a corresponding check. http://stackoverflow.com/questions/18775608/free-a-null-pointer-anyway-or-check-first This issue was fixed by using the software Coccinelle 1.0.0-rc24. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
2015-03-16connect: Fix happy eyeballs logic for IPv4-only buildsJay Satiro
Bug: https://github.com/bagder/curl/pull/168 (trynextip) - Don't try the "other" protocol family unless IPv6 is available. In an IPv4-only build the other family can only be IPv6 which is unavailable. This change essentially stops IPv4-only builds from attempting the "happy eyeballs" secondary parallel connection that is supposed to be used by the "other" address family. Prior to this change in IPv4-only builds that secondary parallel connection attempt could be erroneously used by the same family (IPv4) which caused a bug where every address after the first for a host could be tried twice, often in parallel. This change fixes that bug. An example of the bug is shown below. Assume MTEST resolves to 3 addresses 127.0.0.2, 127.0.0.3 and 127.0.0.4: * STATE: INIT => CONNECT handle 0x64f4b0; line 1046 (connection #-5000) * Rebuilt URL to: http://MTEST/ * Added connection 0. The cache now contains 1 members * STATE: CONNECT => WAITRESOLVE handle 0x64f4b0; line 1083 (connection #0) * Trying 127.0.0.2... * STATE: WAITRESOLVE => WAITCONNECT handle 0x64f4b0; line 1163 (connection #0) * Trying 127.0.0.3... * connect to 127.0.0.2 port 80 failed: Connection refused * Trying 127.0.0.3... * connect to 127.0.0.3 port 80 failed: Connection refused * Trying 127.0.0.4... * connect to 127.0.0.3 port 80 failed: Connection refused * Trying 127.0.0.4... * connect to 127.0.0.4 port 80 failed: Connection refused * connect to 127.0.0.4 port 80 failed: Connection refused * Failed to connect to MTEST port 80: Connection refused * Closing connection 0 * The cache now contains 0 members * Expire cleared curl: (7) Failed to connect to MTEST port 80: Connection refused The bug was born in commit bagder/curl@2d435c7.
2015-03-15mksymbolsmanpage.pl: use std header and generate better nroff headerDaniel Stenberg
2015-03-15closesocket: call multi socket cb on close even with custom closeFrank Meier
In function Curl_closesocket() in connect.c the call to Curl_multi_closed() was wrongly omitted if a socket close function (CURLOPT_CLOSESOCKETFUNCTION) is registered. That would lead to not removing the socket from the internal hash table and not calling the multi socket callback appropriately. Bug: http://curl.haxx.se/bug/view.cgi?id=1493
2015-03-14hostip: Fix signal race in Curl_resolv_timeout.Tobias Stoeckmann
A signal handler for SIGALRM is installed in Curl_resolv_timeout. It is configured to interrupt system calls and uses siglongjmp to return into the function if alarm() goes off. The signal handler is installed before curl_jmpenv is initialized. This means that an already installed alarm timer could trigger the newly installed signal handler, leading to undefined behavior when it accesses the uninitialized curl_jmpenv. Even if there is no previously installed alarm available, the code in Curl_resolv_timeout itself installs an alarm before the environment is fully set up. If the process is sent into suspend right after that, the signal handler could be called too early as in previous scenario. To fix this, the signal handler should only be installed and the alarm timer only be set after sigsetjmp has been called.
2015-03-14http2: detect prematures close without data transferedDaniel Stenberg
... by using the regular Curl_http_done() method which checks for that. This makes test 1801 fail consistently with error 56 (which seems fine) to that test is also updated here. Reported-by: Ben Darnell Bug: https://github.com/bagder/curl/issues/166
2015-03-13test320: Expect the Host header to be the first headerDan Fandrich
Required for the test to work after a5d994941c2b.
2015-03-12RELEASE-NOTES: synced with 186e46d88ddDaniel Stenberg
2015-03-12openssl: use colons properly in the ciphers listDaniel Stenberg
While the previous string worked, this is the documented format. Reported-by: Richard Moore
2015-03-12openssl: sort the ciphers on strengthDaniel Stenberg
This makes curl pick better (stronger) ciphers by default. The strongest available ciphers are fine according to the HTTP/2 spec so an OpenSSL built curl is no longer rejected by string HTTP/2 servers. Bug: http://curl.haxx.se/bug/view.cgi?id=1487
2015-03-12test203[0-3]: Expect the Host header to be the first headerFabian Keil
Required for the tests to work after a5d994941c2b.
2015-03-12openssl: show the cipher selection to useDaniel Stenberg
2015-03-12http: always send Host: header as first headerDaniel Stenberg
...after the method line: "Since the Host field-value is critical information for handling a request, a user agent SHOULD generate Host as the first header field following the request-line." / RFC 7230 section 5.4 Additionally, this will also make libcurl ignore multiple specified custom Host: headers and only use the first one. Test 1121 has been updated accordingly Bug: http://curl.haxx.se/bug/view.cgi?id=1491 Reported-by: Rainer Canavan
2015-03-11mk-ca-bundle bugfix: Don't report SHA1 numbers with "-q".Alexander Pepper
Also unified printing to STDERR by creating the helper method "report".